Search Results

Search found 10207 results on 409 pages for 'ethernet switch'.

Page 228/409 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• internal DNS server limiting the speed as 55kb/sec ?

  - by kartook

  Hi all , Thanks in advance to everyone . Here is my Question . 1 .We have LAN internal DNS server ( 192.168.205.200 ) 2. DNS server Running on my ADDITIONAL DOMAIN CONTROLLER 3. Tested with Nslookup IPADDRESS and hostname resolving without any error . 4 .DHCP server Running on 3750 Switch ( Checked with CISCO Confirmed the configuration ) .DNS name server pointed to 192.168.205.200 . ISSUE : 1.Host getting ipaddress and DNS from DHCP server .Maximum file transfer Bandwidth 55KB/sec . 2. Assigned Static DNS on Host as ISP DNSServer Address, host getting full bandwidth whihc is 1mb/sec Thanks Kartook

  Read the article

• TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

  - by Anx Ara

  I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

  Read the article

• Debian based OS: Show system notification on clipboard copy/paste events

  - by ifischer

  When working with Linux (Debian based), I often experience problems in relation to the copy paste commands: I copy something with Ctrl+C or by selecting it with the mouse, but when I try to paste it somewhere else, the clipboard is empty and nothing happens - whatever reason caused this. This annoys me, as I have to switch to the source application again and again copy the text. So to really be sure if something was copied into the clipboard I would like it if the window manager (be it Gnome, KDE, etc) would show a Desktop Notification (for example powered by libnotify) as soon as anything is copied into the clipboard, showing the content that has been copied into the clipboard. Is that possible by using one of the many clipboard managers out there (glippy, clipit, ...)? If not, can I write a (DBus?)-hook, which is triggered during copy-to-clipboard-actions, showing the content which is to copy inside the Desktop Notification? (The latter approach would be more interesting, since I'm interested in hooking into system events in general)

  Read the article

• Which dbghelp.dll do I use for debugging?

  - by Coldblackice

  I'm trying to configure symbols in Process Explorer. I have the Windows SDK installed (and thus, Debugging Tools). However, there are two versions of dbghelp.dll -- x86 and x64. Which one do I use? Other sources on the net say to just point to the dbghelp.dll that's in the base directory of the Debugging Tools. But there's no such dbghelp.dll -- they're in their respect 32 and 64 bit folders (i.e., C:\Program Files (x86)\Windows Kits\8.0\Debuggers\x64). I'm using a Windows 7 x64 operating system, so does that mean I should load the x64 .dll? Or is it a matter of what I'm debugging? If it is a matter of what I'm debugging, does that mean that I have to switch this .dll depending what process I want to get symbol information on in Process Explorer?

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• How to benchmark apache/nginx setup

  - by Saif Bechan

  I am planning to setup nginx as reverse proxy. I will have apache to deliver my dynamic content, and nginx will deliver the static content. My configuration i have now is just Apache with fastCGI. This gives me no configuration problems and runs great. After I have set up nginx I want to run some benchmarks to see if I really got some performance increases, else i will switch back. Does anyone know how I can benchmark this type of setup? Or maybe someone did this already and have some canned results, I will be glad to hear them.

  Read the article

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• How to disable Yoxos popups in Eclipse on Linux

  - by MikeN

  I used the http://eclipsesource.com/en/yoxos/yoxos-ondemand/? tool to build an Eclipse distribution, but they keep giving these annoying Yoxos popups. I don't even get whether Yoxos is free or paid or just annoying as heck. How do you get rid of these Yoxos popups? This is the text of the popup: POPUP: Thank you for evaluating Pydev Extensions. If you wish to license Pydev Extensions, please visit the link below for instructions on how to buy your license: Buy When you license it, not only will you get rid of this dialog, but you will also help fostering the Pydev Open Source version. If you wish more information on the available features, you can check it on the link below: Features Matrix Or you may browse the homepage starting at its initial page: Pydev Extensions Main Page The links don't allow you to register buy the PyDev extensions. How can I switch to free pydev extensions? My other eclipse installs I just used the free PyDev and it is exactly the same.

  Read the article

• OSX Keyboard Shortcuts in Dialogs?

  - by Dan Fabulich

  On Windows, every dialog box includes underlined letters that you can activate using the Alt key. I use these "Alt" keyboard shortcuts all the time; I'm missing them as I'm trying to switch to OSX. On OSX, all I can find is Tab navigation, which requires you to press Tab seven or eight times to get anywhere in most dialog boxes. (And even that is hidden by default: you have to enable "Full keyboard access" in the "Keyboard & Mouse" control panel to be able to Tab between buttons.) Is there some way I can get something like the Windows Alt accelerators for OSX dialogs? I'm willing to write Automator code, download/purchase software, etc. Specifically, I'm imagining maybe something where you do some shortcut command and then start typing the name of the button, and hit Enter to push the button...?

  Read the article

• Linux HA - Best Heartbeat hardware solution

  - by Martino Dino

  Hi all I would ask anyone what is the best layer 2 medium for heartbeat in Linux and how it's best configured. More precisely I've been thinking about a dedicated NIC for that purpose but then i thought that if a switch breaks then i would loose the heartbeat connection for most of the cluster and STONITH 'BUM'!!! Will probably loose my job after :) Distributing the heartbeat onto the main NICs of every node trough a vif sounds reasonable but im not sure if this is the best option (at least the switches are redundant to some extent). Is it possible to use heartbeat over a bonded interface and that sounds reasonable? Do you have any other tip/solution for that issue?

  Read the article

• Safari MAC proxy bypass for IPv6

  - by rhi

  I'm a first-time n00b on Mac ; (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy, OK. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6 ? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

  Read the article

• Memory consumption of each accept() call on server running on Windows 2008 [migrated]

  - by Atul

  I've written a simple and small server application on Windows 2008 that just accepts connections and does nothing else. I am doing memory footprint assessment of socket calls, What I found that each connection (after accept()) consumes at least 2.5 KB of memory. Interestingly, the memory is not consumed by the process that has accept() call but it consumed by a OS process. I believe it might be because of data structures being created inside OS for each connection. Now, I have two key questions: Is it possible by any means to reduce this memory footprint (by changing any parameters, configuration etc) ? If yes how ? (Because 2K for each connection would be too much if we planning server to accept millions of connections) If my server is intended to accept million connections, is it good idea to use Windows 2008 ? or shall I switch to some other OS? Please advice me.

  Read the article

• Remote Desktop with resource sharing

  - by Malfist

  I recently removed ubuntu from my laptop and installed Windows 7 because Microsoft's DreamSpark program gave me Visual Studio Pro for free and I want to do some C# programming with it. The problem is that my laptop's screen is small, it's resources are extremely limited, and it doesn't have a full sized keyboard. However, I do have a desktop that is my primary system, and it's got a quadcore and tons of RAM in it, and dual monitors. My question is this, is there a way I can use a program from my laptop, on my desktop, and share my desktops CPU and RAM with the laptop? Everything is connected through a 100 MB/s switch. One caveat, my desktop is running ubuntu.

  Read the article

• Share an ATI Catalyst Profile across several/all users

  - by CJM

  We've set up some hotkeys in the ATI Catalyst Control Panel on a communal machine, and we're trying to share this among a number of users, possibly all users. The profile is stored as MyProfile.xml in the Local Settings tree; the profile can be loaded through a shortcut, but unfortunately the Profilename switch simply expects the name of the profile rather than the path to the XML file. And while we can copy the profile to appropriate folders under other users accounts, the mere presence of the XML isn't enough to make the profile available to the user. A quick scan of the registry didn't reveal much, though I suspect there is something in there to be aware of. Any ideas on how we can share this profile?

  Read the article

• Bash: Variable substitution in variable name with default value

  - by krissi

  i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

  Read the article

• Connect work laptop (domain) to home workgroup

  - by jjeaton

  Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

  Read the article

• Problems using PC as a media server with PS3

  - by Tiger

  I recently got a PS3 and decided to take advantage of the fact that it can be used to stream movies by making my PC a media server. I've done this in the past with the same router I have now before I sold my old PS3, but not on this PC. I've tried using both Tversity and PS3 Media server, but I don't think the problem lies within the configuration of either of those programs because I am unable to ping the PS3. This problem only occurs when I am using a wired connection on my pc, attempting to connect to a WLAN connection on the PS3. If I switch to WLAN on my PC I can successfully ping the PS3 and connect to the media server. Thanks

  Read the article

• trying to connect to non-standard port over esxi guest network

  - by user52874

  I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

  Read the article

• One network, two macbooks, one is fast and the other is slow

  - by Brendan

  I really need help for my friend. I know next to nothing about computers. My roommate and I both have macbook pros from the same year running OS X, are both connecting wirelessly to the same xfinity wifi, and while mine runs perfectly fine, my roommate complains that his works very slowly and times out every few seconds. I can't seem to figure out why this is. He is trying to get me to switch internet providers because he is convinced that it is their problem, but this cannot possibly be the issue since it works great on mine. He has an xbox hooked up to the wifi that he says also works poorly. I really can't see switching providers given that I am experiencing absolutely zero problems. How can I help my friend?

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >