Search Results

Search found 10963 results on 439 pages for 'documentation generation'.

Page 230/439 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Silent and scripted install of CPAN and Perl modules?

  - by Mikael Grönfelt

  I need to install CPAN and some Perl modules automatically in a Scientific Linux (RHEL) installation script. Unfortunately the specific modules I want (at least one of them) cannot be found as RPM:s as far as I've seen. So I need to install CPAN, configure it automatically (or with a config file) and then install the wanted modules (including dependencies) automatically as well. This doesn't seem like a very unusual requirement, but I haven't seen any really good documentation on this. The problem is that whenever CPAN is launched for the first time an interactive configuration runs. Can this be skipped somehow? And how do I launch module installations directly from the command line?

  Read the article

• Commerce Server 2009 with SharePoint 2010 experiences

  - by rsteckly

  Hi, I'm trying to decide to between using MojoPortal for my organizations CMS or Commerce Server 2009 with SharePoint 2010. We already have SharePoint 2010 for our intranet. In that thinking, perhaps it would make sense to deploy the same technology? We do not have a lot of traffic but do need basic e-commerce functionality. I haven't really found a lot of documentation for Commerce Server 2009. It would have to share the same server with SharePoint 2010. I'm not worried about that because of the low traffic. I'm worried about how difficult it is to install. Is it a nightmare product to install or is it pretty straightforward? Is it unrealistic for it to share a server with SharePoint 2010, even in relatively low traffic? Any experiences with administering MojoPortal? Thanks!

  Read the article

• How can I move mysites to a new location

  - by Bob

  I recently restored my content and was instructed to create mysites in a different location than was originally used. Now I have several users mysites in /personal. The new desired location is /mysites. From what I found in the documentation I should back them up and restore them to the new location. Here's what I've done: Backup individual site collection for user mysite stsadm -o backup -url "https://myUrl/personal/john_smith" -filename johnsmith.bkup Restore individual site collection for user mysite stsadm -o restore -url "https://myUrl/mysites/john_smith" -filename johnsmith.bkup -overwrite The result of this and the problem is when i enumerate sites i end up with this: <Site Url="https://myUrl/mysites" Owner="domainname\john.smith" ContentDatabase="WSS_Content_MySites" StorageUsedMB="1.6" StorageWarningMB="90000" StorageMaxMB="100000" /> it leaves off the username part of the url. and if I restore more that one they want to overwrite each other.

  Read the article

• Puppet class inheritance confusion

  - by EMiller

  I've read the documentation on scope, but I'm still having trouble working this out. I've got two environments that are very similar - so I've got: modules/django-env/manifests/init.pp class django-env { package { "python26": ensure => installed } # etc ... } import "er.pp" modules/django-env/manifests/er.pp $venvname = "er" $venvpath = "/home/django/virtualenvs" class er { file { "$venvpath/$venvname" : ensure => directory } # etc ... } class er-dev { include er } class er-bce-dev { $venvname = "er-bce" include er } manifests/modules.pp import "django-env" manifests/nodes.pp node default { # etc ... } node 'centos-dev' imports default { include django-env include er-bce-dev include er-dev } The result here is that the "inheritance" works - but only the first "er-" item under the 'centos-dev' node is acted upon, I either get er-bce-dev or er-dev, but not both. There must be some basic thing I'm misunderstanding here. Is it the difference between import and include ? (not sure I understand that)

  Read the article

• TrueCrypt & upgrading your hard drive?

  - by Danielb

  I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

  Read the article

• Problem with OWA search. Mailstore catalogues

  - by Anthony

  Dear All, I have trawled for the last few days but have not been able to come up with a solution; any help would be much appreciated. Exchange 2007 STD on Windows 2003 64Bit and users report search not working in OWA. So I first check indexing is enabled on the mail stores Get-MailboxDatabase |ft Name,IndexEnabled which all report true, So I try a test Test-ExchangeSearch [email protected] Which is a false -1 Ok, So I run the reset - resetsearchindex.ps1 this works and the event log reports the stores being crawled and finished. BUT- My complete catalogue data is 300kb - LOL! I wish! Obviously all tests fail so I do it manually; Stop indexing service, Delete catalogues. Restart Still no dice, This is where I’m up to, I have tried many different variations of the above and being through oodles of MS documentation Has anyone got any ideas?

  Read the article

• Microsoft Visual C++ Runtime error when viewing JPEG files in Explorer

  - by Prince Kitts

  I am getting the following error each time I view JPG files in the windows explorer in Detailed view. Microsoft Visual C++ Runtime Library Assertion failed! Program: C:\Windows\Explorer.EXE File: multimedia\photos\metadatahandler\util.cpp Line: 4706 Expression: MinutesFraction < 1.0 For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts (Press Retry to debug the application - JIT must be enabled) These pictures were taken from a Nikon Coolpix AW110 camera. I think it is related to some EXIF data that is a date/time. I have tried reinstalling the Visual C++ 2013 and 2008 Run time library and restarting and the problem is still there. I uploaded a sample file here: https://anonfiles.com/file/e346e174708714a88d372e295265a03f (click topmost download button and not the ad below it or just save the opened image)

  Read the article

• How to configure squid for retrieving (and caching) directly my static resources?

  - by fabien7474

  I have an Apache/Tomcat/Spring tc Server running on CentOS EC2 VM. I would like to install squid on the same machine as a proxy for retrieving (directly i.e. without forwarding the request to Apache/Tomcat) and caching static content ONLY identified by URIs : /images, /css or /js. Other URIs should be forwarded to the normal Web Server and not cached. Since I am a newbie, I didn't find from squid documentation how to configure squid for this desired behavior (and if it is even possible). Could you please help me and tell me how should I configure squid for this purpose? Thank you.

  Read the article

• How do MaxSpareServers work in Apache?

  - by John Hunt

  I've scoured the web but I can't find out what MaxSpareServers are in Apache MPM prefork.. The MaxSpareServers directive sets the desired maximum number of idle child server processes. An idle process is one which is not handling a request. If there are more than MaxSpareServers idle, then the parent process will kill off the excess processes. Great, but what causes a spareserver to be created? More importantly, when does a spare server go away? I understand that minspareservers are created gradually after the server is started.. How do maxspareservers relate to maxclients? Basically I'm at a bit of a loss on how best to configure Apache.. there's a lot of documentation out there but it isn't that clear. Thanks, John.

  Read the article

• Disk Management Hidden Partitions - PTEDIT32

  - by Kairan

  Apparently PTEDIT32 can edit partitions, making partitions that are hidden, visible. My purpose is to take a hidden partition on a toshiba laptop (the recovery partition) and copy it as my hard drive is beginning to fail. My problem, is that I cannot find PTEDIT32 documentation on what i want to change the partition # to. I know that changing it from 27 to 7 would change it from hidden to active - but if I set it to active, I am worried it will try to launch the recovery mode (as that is what it did on a previous laptop) Here is the link I used for instructions to do this on a previous laptop: Hidden_Recovery_Link_Site So how to make the hidden partition visible without it actually RUNNING the recovery mode?

  Read the article

• Second DocumentRoot for certain URLS

  - by scrr

  Hello, I have the following setup in my apache-config: <VirtualHost 1.2.3.4:80> ServerName example.com:80 ServerAlias www.example.com DocumentRoot /var/www/page <Location "/blog"> DocumentRoot /var/www/blog </Location> RailsBaseURI / RailsEnv development </VirtualHost> However, Apache tells me, I am not allowed to have a second DocumentRoot. How can I make "www.example.com/blog" point to "/var/www/blog"? I'm sure this is basic, but I just can't find the proper documentation online.

  Read the article

• Status code in nginx try_files directive

  - by Hamish

  Is it possible to use the current status code as a parameter in try_files? For example, we try to provide a host specific 503 static response, or a server-wide fallback if it wasn't found: error_page 503 @error503; location @error503 { root /path_to_static_root/; try_files /$host/503.html /503.html =503; } There are a number of these directives, so it would be convenient to do something like: error_page 404 @error error_page 500 @error error_page 503 @error location @error { root /path_to_static_root/; try_files /$host/$status.html /$status.html =$status; } But the Variables documentation doesn't list anything that we could use to do this. Is it possible, or is there an alternative way to do this?

  Read the article

• TeamViewer - only allow domain logins

  - by BloodyIron

  I recently started a Systems Admin job where teamviewer is used pretty frequently here. Another admin recently left, and the concern is they still have access to all our systems due to how teamviewer works. I want to migrate the entire environment to domain authentication. The documentation shows that setting up windows auth (domain) is easy, but I want to be sure that it is the only way to be authenticated with a teamviewer session here. I cannot yet find anything which explicitly says this. We have licensing for teamviewer 5 and 6, I think. Right now we have 7 in the environment, but I think most are in a trial version, so I am likely to revert to 5 or 6.

  Read the article

• MySQL mistake with grant option

  - by John Tate

  I am unsure reading the MySQL documentation if creating a user with the GRANT option will give them the power to create users and grant privileges, or change the privileges of other users databases. I have been creating databases for users like this CREATE DATABASE user; USE user; GRANT ALL PRIVILEGES ON *.* TO 'user'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION; Is this the best way of doing it or have I just given my users too much control? They are people I am hosting sites for. Thankfully at this point they are trustworthy. I use quotas. Edit: I have realized I have been granting users access to all databases. This is obviously stupid I should be using this: GRANT ALL PRIVILEGES ON database.* to 'user'@localhost' IDENTIFIED BY 'password' What is the simplest way to revoke privileges for every user except root so I can quickly end this catastrophic rookie mistake?

  Read the article

• Overwrite SOA expiry in a bind9 slave name server.

  - by Joachim Breitner

  I run a slave name server of a domain that I do not have full control over (i.e. changing the SOA is not possibly). The SOA specifies an expiry time of one week. For various reasons, I’d like to override that value on my specific slave server to something larger. Is there a way to do that? N.B: I know that for the refresh and retry fields, bind9 provides the options min-refresh-time, max-refresh-time, min-retry-time and max-retry-time to overrule the SOA, as mentioned in the documentation. For some reason this just does not inclucde expiry.

  Read the article

• Kerberos: Running an app with a parameter using krenew

  - by Mihai Todor

  I need to run an application with krenew, but the application also needs to receive a parameter via command line and I need to send its output to a file. From the documentation, it looks like this should do the trick: krenew -t -- sh -c 'compute-job > /afs/local/data/output' but, unfortunately, when I run the command below: krenew -s -- sh -c './my_app config.xml > results/test.txt &' the application just dies after a while and I can see from the output of ps aux that krenew is not running along with my_app. I am not sure what the parameter -t does, and as far as I can see, if I run krenew -s ./my_app, it works properly. I hope someone can clarify this.

  Read the article

• AWS RDS Timeout

  - by warder57

  I know next to nothing about networking/servers. So I'm assuming I'm missing something obvious. All of the resources I can find on this, either don't work or are outdated. I created a brand new AWS account on the free plan. I created a postgres RDS DB instance. I made sure that this RDS instance is set to publicly accessible. This RDS instance has the default VPC/Security Group settings. In order to connect to this DB from my local machine, I used pgadmin3 and followed the instructions provided on the AWS documentation page. Seen here: http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_ConnectToPostgreSQLInstance.html I've double checked all of the information required to connect: Host: whatever.whatever.us-west-2.rds.amazonaws.com Port: 5432 Username: USERNAME Password: PASSWORD When I try to connect to the database, my connection fails due to a timeout. (During step 4 in the above guide.) Can anyone point me to whatever I am missing? Thanks in advance

  Read the article

• How to restrict HTTP Methods

  - by hemalshah

  I want to restrict HTTP methods to those required by the MOSS07 application(s) using IIS6. I am not able to find a solution after googling. Can any one help. Update this is what was written in the document IIS6 should be used to restrict HTTP methods to those required by the MOSS07 application(s). I also searched some books and saw something curious in O'Reilly's Sharepoint 2007 by James Pyles and others. There is no real suppported way to use HTTP POST and HTTP GET because of the web.config settings and the static definition of the WSDL. In the web.config <protocols> <remove name="HttpGet"> <remove name="HttpPost"> <remove name="HttpPostLocalHost"> <add name="Documentation"> </protocols> If we do this in the Web.Config file, would it solve the problem?

  Read the article

• Changed file and now I cannot access my SSH anymore

  - by Arnold

  I was trying to get my dedicated server to have a couple of VPS's installed using this tutorial: http://linux-vserver.org/Installation_on_CentOS In the process I had to change a file: /etc/ssh/sshd_config The documentation advises to change it into: ListenAddress <host IP address> Guess what? I literally added <host IP address> instead of the dedicated servers IP. I restarted the server and now I'm not able to access my SSH anymore. Can anyone help me to gain access to my SSH again? I'm using CentOS 6.

  Read the article

• Using Active Directory Security Groups as Hierarchical Tags

  - by Nathan Hartley

  Because active directory security groups can... hold objects regardless of OU. be used for reporting, documentation, inventory, etc. be referenced by automated processes (Get-QADGroupMember). be used to apply policy be used by WSUS I would like to use security groups as hierarchical tags, representing various attributes of a computer or user. I am thinking of (computer centric) tags something like these: /tag/vendor/vendorName /tag/system/overallSystemName /tag/application/vendorsApplicationName /tag/dependantOn/computerName /tag/department/departmentName /tag/updates/Group1 Before fumbling through implementing this, I thought I would seek comments from the community. Specifically in the areas: Does this make sense? Would it work? Has anyone else attempted this? Is there a good reference on the matter I should read? How best to implement the hierarchy? Tag_OU\Type_OU\GroupName (limits quantity in OU, uniqueness not guaranteed) Tag_OU\Type_OU\Tag-Type-GroupName (limits quantity in OU, uniqueness guaranteed, verbose) etc ... Thanks in advance!

  Read the article

• ORA-1034 Oracle Not Found

  - by Venkata

  I have recently installed oracle 11g on Windows 7 Home Premium Operating System. I logged in as administrator into windows. I am trying to create a database using DBCA wizard. I started the wizard as administrator. Everything goes fine until last step. However when creating the database the creation fails with ORA-01034 Oracle Not Available error. All my oracle services looks up and running. I consulted the documentation and forums. I have got no clue why I am running into the error.

  Read the article

• No virtual console on ubuntu 12.10

  - by Buzzzz

  When I try to do a ctr-alt f(1-6) in ubuntu 12.10 I only get a black screen with a blinking cursor but no login prompt. Any ideas on what could be wrong? It is a fresh install of 12.10 using a amd radeon 5850 graphics card. i have tried different things in my /etc/default/grub but at the moment I use the following: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vga=normal" #GRUB_CMDLINE_LINUX="vga=0x0376" #RUB_CMDLINE_LINUX_DEFAULT="vga=0x014c" #GRUB_CMDLINE_LINUX="vga=0x014c" #GRUB_GFXPAYLOAD_LINUX=1600x1200x24 # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console

  Read the article

• Cmd+Less Than (10.8.2) not working after Xcode (4.5.x) installed

  - by Felix Lieb

  I had to reinstall my MBP recently. I stress Cmd+Less Than a lot for switching between Xcode's main window and the Organizer for documentation. The standard OSX-shortcut for doing that is Cmd + Less Than. After installing Xcode it didn't work any longer. I saw, that Xcode uses Cmd+LT for "Edit Schemes", a rarely used option. Even after deleting the shortcut for "Edit Schemes" in Xcode, Cmd+LT didn't work. How can I get Cmd + Less Than to work again? Mac OS X Mount Lion 10.8.2 Xcode 4.5.2 I have less than 10 reputation on superuser (acutally first post here), so I can't post the answer to my question. Would yo be so kind and upvote this question, so I can officially answer the question? The question, as well as the answer is only correct, if you use German keyboard layout.

  Read the article

• How to configure Dovecot to not serve large emails to high-latency clients?

  - by Daniel Quinn

  I have a Dovecot mailserver running at home on a flaky cable connection. For the most part, the IMAP functionality works beautifully, but I'd like to add one feature if I can: I want Dovecot not to serve large messages to high-latency clients. That is to say, if someone decides that it's a good idea to send me a 9.3mb email to me, I don't want to get it unless I'm on my LAN at home. This can't be an uncommon request, but I'm having trouble finding the configuration option in their documentation. Any ideas and/or good keywords to use in Googling would be awesome.

  Read the article

• Ubuntu 11.04 and OpenLDAP - where is the config?

  - by Tom SKelley

  I've been asked to setup a multimaster LDAP environment on Ubuntu 11.04 - instead of a single master server. I cloned the master server and recreated it into two VMs. I am trying to follow the instructions on the OpenLDAP documentation here: http://www.openldap.org/doc/admin24/replication.html and it talks about modifying the cn=config tree within LDAP. The subdirectory tree appears to be there at: /etc/ldap/slapd.d/ and a slapcat -b cn=config drops out a load of config information. When I try to connect using a browser and the admin bind credentials: ldapsearch -D '<adminDN>' -w <password> -b 'cn=config' I get: # extended LDIF # # LDAPv3 # base <> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object I don't see the config context when I connect via an LDAP browser either. I'm sure I'm missing something, but I can't see what it is!

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >