Search Results

Search found 11288 results on 452 pages for 'git status'.

Page 231/452 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

• OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

  - by ani

  I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

  Read the article

• How do I resolve an "Invalid Transaction" error saving a zone config in Brocade Web Tools?

  - by Frank Szczerba

  When trying to save zoning changes in the Zone Administration tool in Brocade Web Tools, I get the status "Failed to commit changes to fabric" and the messages window shows: --- start of commit (Enable Config) at: Fri Jul 23 2010 19:43:40 GMT+00:00 Invalid Transaction --- end of commit at: Fri Jul 23 2010 19:43:47 GMT+00:00 I've tried refreshing the config and just re-saving what is already on the switch, but can't get this message to go away.

  Read the article

• Debian no lib32asound2-plugins=1.0.25

  - by erai

  I compiled git wine 1.5.6 and the sound is not working correctly. winecfg gives a message: ALSA lib ../../pulse/pcm_pulse.c:995:(_snd_pcm_pulse_open) Unknown field handle_underrun err:winediag:AUDDRV_GetAudioEndpoint PulseAudio "default" -22 without handle_underrun. Audio may hang. Please upgrade to alsa_plugins >= 1.0.24 err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded But on wheezy there is no package lib32asound2-plugins 1.0.25 So, how do I build and package alsa-plugins to install to lib32? Or how do I use automake's configure to compile a 32bit lib on a 64 bit system. All I Need now is the libavcodec-dev for 32bit, but I don't understand. What is the 32bit libavcodec-dev package for amd64 debian?

  Read the article

• Google Chrome issues

  - by Ben Hooper

  I'm an avid user of Chrome and would defend it to the death but there is no denying that it has issues, and I've been experiencing a lot of them recently. Issues Stuck tabs Issue: Around 60% of the time (higher when the system has just started), when Chrome is launched, some or all of the pinned tabs and startup pages will get stuck in the counter-clockwise-rotating "contacting server" mode and never snap out of it. Fix: Quit and launch Chrome until they load properly (this really isn't good, as quitting and launching Chrome can and has cleared all pinned tabs). Extra Information: If you stop the loading and re-enter the URL then the page will load perfectly. The amount of pinned tabs or startup pages seems to be irrelevant, but I could be wrong.   "Downloaded/out of" Issue: Each item in the download bar has a downloaded status section, formatted as "downloaded/out of". Sometimes Chrome doesn't display the "out of" part.   Collapsed settings windows Issue: In Chrome version 19(ish)+, settings are configured via overlayed / popup windows. Sometimes, the window will open fully collapsed. Fix: Resize Chrome's window or open the developer tools. "Network Error" with large downloads Issue: Sometimes, when downloading large files (500MB+) Chrome will download the entire file, the download status will freeze (for example, "1 GB/1 GB") for a few minutes, report "Network error", and delete the .crdownload file. Extra Information: The same file from the same website on the same computer downloads perfectly in other browsers. The website and file type seem to be irrelevant.   Information: I've experienced some of these issues on my home PC and some on my work PC, both of which are Windows 7 Ultimate x64. The only things that link them are my Google account (all settings are synced). Updating Chrome hasn't worked. Most of these issues presented themselves around about version 17 and have continued right through to 21 (current). Uninstalling Chrome, deleting all data in %programFiles(x86)%\Google and %localAppData%\Google, and reinstalling hasn't worked. I have yet to see whether disabling all extensions would make a difference, but it's hard to diagnose as these issues don't occur 100% of the time.   In my case, I don't know if there's an actual solution. I'm just curious as to whether anyone else is having similar issues to those that I'm experiencing. At least then I'll know it's an issue with Chrome itself.

  Read the article

• isa 2004 - banned site rule cause slow internet

  - by Holian

  Hi Gods, We have windows server 2003 with isa 2004. Our clients uses internet with proxy. We have two isa rule: order name action protocolls from/listener to condition 1. trafic ALLOW all outbound all networks all networks all users 2. FTP ALLOW FTP Server EXTERNAL/INTERNAL/Local host 10.1.1.1 So we have to "bann" a few webpage (like facebook, youtube...etc...), so we make a new rule 0. banned DENY HTTP internal denied pages all users In the denied pages we have the *.facebook.com domain set. After we enable this rule, the entire internet slows down. The banning rule works well, redirect to an internal site, but the other sites.... If i open a page..it normally takes 3-10 sec to load, but after this rule this time is: 2-4 minutes. In the monitor / logging menu we got a few FAILED CONNECTION ATTEMPT like: Log type: Web Proxy (Forward) Status: 304 Not Modified Rule: All local traffic Source: Internal ( 10.1.1.1:0 ) Destination: External ( 172.24.28.22:3128 ) Request: GET http://www.konyvelozona.hu/wp-content/uploads/nyugdijas-holgy-2.jpg Filter information: Req ID: 17270b72 Protocol: http User: anonymous Additional information Client agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.3072... Object source: Verified Cache Processing time: 9047 Cache info: 0x18801002 MIME type: - In the event log we got a few log: Description: The Web Proxy filter failed to bind its socket to 10.1.1.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d The Web Proxy filter failed to bind its socket to 127.0.0.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d If i tpye: netstat -o -n -a | findstr 0.0:80 then i got, tcp 0.0.0.0:80 0.0.0.0:0 LISTEN 4 udp 0.0.0.0:8031 *.* 2780 udp 0.0.0.0:8082 *.* 2780 Some month ago we installed XMAP, but now we only use mysql. Apache service stopped. In the Xamp port check menu i see: Service POrt Status Apache (http) 80 Process: System Maybee this is the problem? I dont know what should i do now... Thank you folks.

  Read the article

• Win7 OpenSSH config: no address associated with name

  - by Jonah

  I am using OpenSSH on win7. My home dir is C:\Users\JG, and inside that dir I have the file C:\Users\JG\.ssh\config, with these contents: Host <redacted server ip here> HostName digitalocean_git User git IdentityFile ~/.ssh/digitalocean_moocho/id_rsa The id file pointed to by the "IdentityFile" entry works, as I use it just fine via putty, but for this problem I am trying to get command line OpenSSH working. The crux of the problem is explained by this output: >ssh -v digitalocean_git OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Reading configuration data /c/Users/JG/.ssh/config ssh: digitalocean_git: no address associated with name Why is no address associated with the name? How can I make this work?

  Read the article

• Event ID 3009 on SBS 2003 R2

  - by Igor

  Getting the following error on my SBS 2003 R2 Server: Server ActiveSync: Unexpected Exchange mailbox Server error: Server: [celeritympp.mpp1.local] User: [[email protected]] HTTP status code: [409]. Verify that the Exchange mailbox Server is working correctly. Any help would be greatly appreciated.

  Read the article

• Hyper-V/Ubuntu server 12.04 - VM does not stop

  - by Alex T.

  i just installed a ubuntu 12.04 server on a 2008 R2 Hyper-V server and all is fine (networking/storage ...). There is just one thing, when i halt my linux (using "sudo halt"), i can see on the console that the system is halted but the vm status on hyper-v is still "started". Then i need to stop it on the hyper-v management tool. Anybody has an idea on how to properly stop this VM on hyper-V automatically ? Thanks, Alex

  Read the article

• Why are unicode characters not rendering correctly

  - by sw1nn

  Background: I have some unicode characters in my prompt (git status markers essentially) I'm running urxvt under xfce on arch linux. I'm using DejaVu Sans Mono for Powerline font, specified via .Xresources line: URxvt*font: xft:DejaVu Sans Mono for Powerline:pixelsize=14 When I start urxvt the unicode characters do not render correctly. For example ? renders as â However, if I then start a new urxvt from inside the first terminal everything renders correctly. There doesn't appear to be any difference in the environment between the two terminals. What could be the difference between the first invocation and the nested invocation? I suspect the font is not correct in the 'outer' instance, but I'm unsure how to check the font of a running X window screenshot demonstrates the problem: Note: I moved this question from serverfault.com - i hope this site is more appropriate

  Read the article

• Windows 7 - Virtual PC or Workstation 7.1 - Not working 4 me

  - by George

  I have a Windows 7 Ultimate - 64 bit Operating System When I'm trying to create virtual machine Windows Server 2008 64 bit I'm getting the same error neither with Virtual PC or Workstation 7.1 Error: 64 bit guest operating systems are not supported by this host and will not run and Status: 0xc000035a info: Attempting to load a 64 bit application however this CPU is not compatible with 64 bit mode. Is it any settings I'm missing or can you give me a suggestion about workaround, or what do I need to make it work.

  Read the article

• Why does squid reject this multipart-form-data POST from curl?

  - by keturn

  This fails: $ curl --trace multipart-fail.log -F "source={}" http://127.0.0.1:3003/jslint With a squid status 417 error, ERR_INVALID_REQ. trace of failing curl request trace of successful curl request that uses urlencoding (curl -d) instead of multipart (curl -F) formatted version of squid's error message I've never had this in practice through a web browser, so it's probably curl usage instead of squid, but if I tell curl not to use the squid proxy, the web application on the other end accepts it just fine. (If there's a more appropriate StackExchange site for this, please let me know.)

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• How to analyse logs after the site was hacked

  - by Vasiliy Toporov

  One of our web-projects was hacked. Malefactor changed some template files in project and 1 core file of the web-framework (it's one of the famous php-frameworks). We found all corrupted files by git and reverted them. So now I need to find the weak point. With high probability we can say, that it's not the ftp or ssh password abduction. The support specialist of hosting provider (after logs analysis) said that it was the security hole in our code. My questions: 1) What tools should I use, to review access and error logs of Apache? (Our server distro is Debian). 2) Can you write tips of suspicious lines detection in logs? Maybe tutorials or primers of some useful regexps or techniques? 3) How to separate "normal user behavior" from suspicious in logs. 4) Is there any way to preventing attacks in Apache? Thanks for your help.

  Read the article

• Cancel background backup operation on Windows Server 2008

  - by Jason R. Coombs

  How can one cleanly cancel a background backup operation on Windows Server 2008 created through the Windows Server Backup console using Backup Once after the status windows has been closed?

  Read the article

• Outlook 2007 - Missing Out of Office Assistant item on Tools menu

  - by lance-gallant

  We're running an Exchange 2003 Server with Outlook 2007 clients. One of the users does not have the Out of Office assistant on their Tools menu. If I access his account via webmail, I can set his out of office message and status there, but would still love to know why it might be missing and how to get it back on the tools menu

  Read the article

• Dell PowerEdge R720 - Corrupted RAID

  - by BT643

  Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

  Read the article

• Why can host and nslookup resolve a name but dig cannot?

  - by musashiXXX

  Can anyone tell me why this is happening? I can resolve a hostname using host and/or nslookup but forward lookups do not work with dig; reverse lookups do: musashixxx@box:~$ host someserver someserver.somenet.internal has address 192.168.0.252 musashixxx@box:~$ host 192.168.0.252 252.0.168.192.in-addr.arpa domain name pointer someserver.somenet.internal. musashixxx@box:~$ nslookup someserver Server: 192.168.0.253 Address: 192.168.0.253#53 Name: someserver.somenet.internal Address: 192.168.0.252 musashixxx@box:~$ nslookup 192.168.0.252 Server: 192.168.0.253 Address: 192.168.0.253#53 252.0.168.192.in-addr.arpa name = someserver.somenet.internal. musashixxx@box:~$ dig someserver ; <<>> DiG 9.8.1-P1 <<>> someserver ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 55306 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;someserver. IN A ;; Query time: 0 msec ;; SERVER: 192.168.0.253#53(192.168.0.253) ;; WHEN: Wed Oct 3 15:47:38 2012 ;; MSG SIZE rcvd: 27 musashixxx@box:~$ dig -x 192.168.0.252 ; <<>> DiG 9.8.1-P1 <<>> -x 192.168.0.252 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 28126 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;252.0.168.192.in-addr.arpa. IN PTR ;; ANSWER SECTION: 252.0.168.192.in-addr.arpa. 3600 IN PTR someserver.somenet.internal. ;; Query time: 0 msec ;; SERVER: 192.168.0.253#53(192.168.0.253) ;; WHEN: Wed Oct 3 15:49:11 2012 ;; MSG SIZE rcvd: 86 Here's what my resolv.conf looks like: nameserver 192.168.0.253 search somenet.internal Is this behavior normal? Any thoughts?

  Read the article

• Free Markdown JS viewer

  - by maaartinus

  I'd like to use Markdown for documents to be exchanged with a colleague of mine. The ideal workflow would be IMHO editing the source in any plaintext editor while simultaneously viewing it in a browser. The client viewer should be able to redraw the text after each save automatically, and ideally even always switch to the most recent source file (so I don't need to navigate there manually). It'd be nice if I could (was allowed) modify the viewer a bit, things like using trailing spaces for line breaks are really terrible (I don't see them, my editor strips them, git complains about them, etc.). I'm interested in a software capable of this and easy to modify, and also in your opinions on the described workflow.

  Read the article

• Changing the passphrase of a private key in Windows

  - by janos

  I have a private key in Windows, created by puttygen.exe. I used default options to save it, the tool automatically gave it a .ppk extension, and it looks like this: PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20130627 Public-Lines: 4 AAAAB3NzaC1yc2EAAAABJQAAAIBnvvAhyMs4rdlQd4OdajDw4jIPi6vIjrWjt4l4 5C3wHOSxyQQdtSA8XT3K0rSBnNtZRJTb5mfix67qQe3pHCTMSNsYIaBi8xQJHZRa RxdY+1VtGnSlEma8KO2We9eDNCGiwrRTUzqvTiGCnzU0pF1MXxu3ObISJcpqv+sQ 1GB0cw== Private-Lines: 8 AAAA.......... Private-MAC: XXXXXXXXX Now I need to change the passphrase, and reading from the docs it seemed simple enough: puttygen.exe -P key.ppk But this pops up a window with this error: PuTTYgen Error: Couldn't load private key (unable to open file) I also tried to change the passphrase using ssh-keygen that comes with Git Bash: ssh-keygen.exe -p -f key.ppk It asks for my old passphrase, but then it gives me the error Bad passphrase. Which is not true, because I can add the key in pageant.exe, and I am not mistyping the passphrase... Anything else I can try to change or drop the passphrase?

  Read the article

• Mysql innoDB corruption after server crash

  - by Ward Loockx

  Yesterday my server died because an outage in the data center. Today it's back up, but having some problems with mysql. First of all my mysql server was not able to start. For this reason I deleted the files ib_logfile0 and ib_logfile1 in /var/lib/mysql folder (I still have the old failing files). After this my server was able to startup again. But now I see a lot of issues in the mysql log file. Sep 1 09:43:55 * mysqld: 120901 9:43:55 InnoDB: Error: page 70944 log sequence number 8 1483471899 Sep 1 09:43:55 * mysqld: InnoDB: is in the future! Current system log sequence number 5 612394935. Sep 1 09:43:55 * mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 09:43:55 * mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 09:43:55 * mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html When I check the docs on mysql.com, I found that I need to recover my database with backups. I have a backup but not sure what's the good way on importing it. Or is there a way to recover without having to re-import the database again? So if I'm correct I need to put innodb_force_recovery to 4 in mysql and delete all current data and re-import? Is there a way to do this without having downtime? I also have one slave running. This slave has the current status now: Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master's binary log is corrupted (you can check this by running 'mysqlbinlog' on the binary log), the slave's relay log is corrupted (you can check this by running 'mysqlbinlog' on the relay log), a network problem, or a bug in the master's or slave's MySQL code. If you want to check the master's binary log or slave's relay log, you will be able to know their names by issuing 'SHOW SLAVE STATUS' on this slave. How can I totally reset the slave after the new import on the master has happend? Hopefully we can find a solution without not to much downtime. Thanks!

  Read the article

• unable to decompress a *.tar.xz file

  - by neubert

  Per http://askubuntu.com/a/107976 I tried tar xf php-5.6.0RC4.tar.xz and tar -xJf php-5.6.0RC4.tar.xz and in both cases I get the following: tar (child): xz: Cannot exec: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now Here's php-5.6.0RC4.tar.xz: http://downloads.php.net/tyrael/php-5.6.0RC4.tar.xz I'm running Ubuntu 14.04 LTS.

  Read the article

• What to do about "required data was not placed into memory"?

  - by rajivpradeep

  I get the following error: The instruction at "0x10022662" referenced to a memory at "0x10022662". The required data was not placed into memory because of an I/O error status of "0xc000026e". click ok to terminate the program Can any one tell me what and why does this error occur?

  Read the article

• sudo su - username while keeping ssh key forwarding

  - by Florian Schulze

  If I have a server A into which I can login with my ssh key and I have the ability to "sudo su - otheruser", I lose key forwarding, because the env variables are removed and the socket is only readable by my original user. Is there a way I can bridge the key forwarding through the "sudo su - otheruser", so I can do stuff on a server B with my forwarded key (git clone and rsync in my case)? The only way I can think of is adding my key to authorized_keys of otheruser and "ssh otheruser@localhost", but that's cumbersome to do for every user and server combination I may have.

  Read the article

• How can I get ssh-agent working over ssh and in tmux (on OS X)?

  - by Rich

  I have a private key set up for my github account, the passphrase to which is, I believe, stored in OS X's keychain. I certainly don't have to type it in when I open a terminal window and enter ssh [email protected]. However, when I'm running bash over an ssh session, or locally inside a tmux session, I have to type in the passphrase every single time I attempt to ssh to github. This question suggests that a similar problem exists with screen, but I don't really understand the issue well enough to fix it in tmux. There's also this page which includes a fairly complicated solution, but for zsh. EDIT: In response to @Mikel's answer, from a local terminal I get the following output: [~] $ echo $SSH_AUTH_SOCK /tmp/launch-S4HBD6/Listeners [~] $ ssh-add -l 2048 [my key fingerprint] /Users/richie/.ssh/id_rsa (RSA) [~] $ typeset -p SSH_AUTH_SOCK declare -x SSH_AUTH_SOCK="/tmp/launch-S4HBD6/Listeners" Whereas over ssh or in tmux I get: [~] $ echo $SSH_AUTH_SOCK [~] $ ssh-add -l Could not open a connection to your authentication agent. [~] $ typeset -p SSH_AUTH_SOCK bash: typeset: SSH_AUTH_SOCK: not found echo $SSH_AGENT_PID returns nothing whatever shell I run it from.

  Read the article

• Installing "SoX" via the Terminal

  - by timkl

  I'm new to installing applications via the Terminal, so excuse my absolute ignorance on the subject. I want to install SoX ( http://sox.sourceforge.net/ ), so I can do some ninja audio editing. First I installed git, then I installed SoX. I didn't get any error messages and the installation has spawned a sox-folder in my Users/myName-folder. However when I use the program by typing "sox" in the Terminal, nothing happens, all I get is "command not found". Does anybody know how to troubleshoot this?

  Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >