Search Results

Search found 12104 results on 485 pages for 'auth basic'.

Page 232/485 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• Is it bad to have a very full hard drive on a high traffic database server?

  - by MikeN

  Running an Ubuntu server with MySQL for a high traffic production database server. Nothing else is running on the machine except the MySQL instance. We store daily database backups on the DB server, is there any performance hit or reason why we should keep the hard disk relatively empty? If the disk is filled up to 86%+ with the database and all of the backups, does it hurt performance at all? So would the DB server running with 86-90%+ full capacity perform less well in any way than the server running with only a 10% full disk? The total disk size on the server is over 1 TB so even 10% of the disk should be enough for basic O/S swapping and such.

  Read the article

• How can I send a Wake on Wireless LAN (WoWLAN) / Wake on Demand request manually?

  - by pioto

  This is similar to, but not the same as, http://serverfault.com/questions/1721/is-wireless-wake-on-lan-possible. I know it is supposed to be possible. The question is, how do I do whatever the AirPort Basestation will do? All I can find so far is that supposedly I need to send something with Wireless Multimedia Extensions (WMM): Basically, I want to be able to wake up my Mac Mini remotely, probably using my Linux laptop. Does anyone know of a tool to do this? Basic Wake on LAN tools do not seem to be the right thing. I don't need the Sleep Proxy Service bit, because I already know the MAC address of the system I want to wake up.

  Read the article

• What is a safe way to dispose of personal info on an old laptop and what to do with said laptop?

  - by MikeN

  I have an old laptop someone gave me that only has 64Megs of RAM on it and runs WIN XP. I wanted to wipe the drive clean by installing Ubuntu Desktop to remove any shred of personal information on it and to make it useful to someone else. But the Ubuntu installer keeps failing because there is not enough RAM. Is there another version of Linux that would easily install on a 64 Megs of RAM system? 2nd part of question, what do I do with this old laptop? It doesn't have a battery anymore and has to be plugged into the wall to run. Assuming I can install a good Linux distro on it, who do I give it to? Salvation Army? I'm looking to just have it be useful to someone or some organization for spare parts or some basic computer usage.

  Read the article

• estimating size of reply HTTP headers

  - by Guanidene

  I am trying to download a file via a basic socket connection, using a HTTP GET request. So, I have to specify how many bytes of data coming in I have to read from the socket. However, I am having trouble deciding the amount of data (say, in bytes) the server would reply back with. I know that there is a "Content-Length" field in the reply sent by server, but that gives me the size of the actual data (without the http headers). Is there a way to get the exact size of HTTP headers sent by the server or an estimation is required? (I am doing this for downloading on a mobile network, where every bit of data matters in terms of time and money, so I don't wish to make an unnecessary larger estimate of the header size.)

  Read the article

• How a router decides destination of packet?

  - by user58859

  I have basic networking question. Scenario : Two pc's are communicating on a wan. Both the pc's ate behind routers or modems. My question : Both the pc's have public IP of each other. That public IP is most of the time is either of the router or of the modem. There can be more then one pc's behind those routers and modems. Then how the pc's are communicating. I can understand the packets can reach upto those routers or modems. But what after that. In the packet , destination IP is public IP. Then how the router or modem decides where to send the packet? Can anybody explain me this please. Thanks in advance.

  Read the article

• How to delete files on the command line with regular expressions?

  - by Jack

  Lets say I have 20 files named FOOXX, where XX is the number of the file, eg 01, 02 etc. At the moment, if I want to delete all files lower than the number 10, this is easy and I just use a wildcard, eg rm FOO0* However, if I want to delete specific files ina range, eg 13-15, this becomes more difficult. rm FPP[13-15] does not work, and asks me if I wish to delete all files. Likewse rm FOO1[3-5] wishes to delete all files that begin with FOO1 So, what is the best way to delete ranges of files like this? I have tried with both bash and zsh, and I don't think they differ so much for such a basic task?

  Read the article

• Deploying a Windows 7 image, which way is the fastest?

  - by MatF

  I captured an image of a basic Windows 7 installation with some modifications using imagex. Before the image was captured, I ran sysprep generalizing and selecting to enter OOBE after it's done. Which way would be the fastest to deploy that image again? Using imagex /apply. Or naming the image install.wim and put it in the source folder of a normal installation (on a bootable USB device), running a normal setup afterwards. Currently I have only tried the second approach. However I just found out about the imagex way and wondered if it would be faster. Or are the even more methods that would be better?

  Read the article

• Reverse Engineer Formula

  - by aaronls

  Are there any free programs or web services for reverse engineering a formula given a set of inputs and outputs? Consider if had 3 columns of data. The first two numbers are inputs, and the last one is an output: 3,4,7 1,4,5 4,2,6 The outputs could be produced with simply a+b, but there could be many formulas that would give the same result of course. I am talking about data without any error or deviation, and I think the formula would only need basic operations(divide, multiply, add, sutbract) and possibly use one of floor/ceiling/round.

  Read the article

• Error opening microsoft.com with Google Chrome

  - by Ilnur

  Hi! I need help with my browsers. In my OS (windows 7 basic) installed 2 browsers: IE 8 and Google Chrome. When I trying to open pages, which associated with microsoft.com (like ms live and others), my browser crashes. IE 8 crashes too. But Opera (I've installed it later) works fine with that pages. P.S. I tried to search the trojan software and viruses. But my PC is clean.

  Read the article

• Wake up my company computer from a home computer

  - by Darcy

  I would like to learn if it is possible for me to send a packet (a magical one) from another computer to my computer. I am interested in waking up my computer at work from the one I am using at home. That is I would like to power it on at 7:00am by sending it a wake-on packet from the home computer. I have no idea how to carry out this seemingly trivial task, I hope someone could offer some basic ideas for me start. Thank you so much in advance.

  Read the article

• powershell Read-host does not stop for input

  - by llirik42

  I thought this would be fairly basic, but i'm stuck. I have 3 lines of powershell script in which I want to collect a mailbox name from user input, then create names based on that mailbox name. (later the script proceeds to create the groups in AD, etc) my problem is that when I run all 3 of these lines by pasting them into powershell window, I don't get a change to enter the response to read-host. Instead the script just scrolls through to the next line and uses it as the response for the Read-Host here's the powershell: $name = read-host "enter group name" $groupfull = ($name+'.Full'a) $groupsendas = ($name+'.SendAs') Here's the output: PS C:\Users\kg> $name = read-host "enter group name" enter group name: $groupfull = ($name+'.Full') PS C:\Users\kg> $groupsendas = ($name+'.SendAs') PS C:\Users\kg> Thanks in advance

  Read the article

• Best practice for ONLY allowing MySQL access to a server?

  - by Calvin Froedge

  Here's the use case: I have a SaaS system that was built (dev environment) on a single box. I've moved everything to a cloud environment running Ubuntu 10.10. One server runs the application, the other runs the database. The basic idea is that the server that runs the database should only be accessible by the application and the administrator's machine, who both have correct RSA keys. My question: Would it be better practice to use a firewall to block access to ALL ports except MySQL, or skip firewall / iptables and just disable all other services / ports completely? Furthermore, should I run MySQL on a non-standard port? This database will hold quite sensitive information and I want to make sure I'm doing everything possible to properly safeguard it. Thanks in advance. I've been reading here for a while but this is the first question that I've asked. I'll try to answer some as well = )

  Read the article

• Why can't I create a Windows backup on my secondary disk?

  - by Brian Sullivan

  I've installed Windows 7 Ultimate on an SSD that I've added to the XPS desktop that I bought from Dell. I would like to use the built-in backup functionality to create incremental backups and store them on the large drive that came with the machine. I formatted the large drive and turned it into a Basic disk. However, when I try to set the backup location to the large internal disk (E:\) in the "Set up backup" wizard, a get a message saying, "A system image cannot be saved on a drive that your computer boots from or that Windows is installed on." Windows is not installed on that disk. I even deleted the OEM partition that was on the disk, and removed it completely from the boot order in the BIOS. Any clue why Windows is griping at me about this?

  Read the article

• Tool to convert a series of image into a single sprite sheet

  - by senbei

  Are there any known tools that can take a serie of pictures and generate a single sprite sheet from them? (ie. place all the images into a single image, one after the other). I have found some very basic software doing this, but I am looking for one that is able to detect duplicate frames as well as outputting some kind of data structure that allow me to programatically retrieve the coordinate of each frame on the generated image. I need this to convert existing animations with many duplicate frames and I am a bit surprised that there is no standard software to do this, as most infos you can find on the web about this is people doing this completely manually.. Any recommendations?

  Read the article

• Is it possible to install and use a printer in Azure Worker Roles?

  - by lurkerbelow

  I'd like to know if it's possible to create and use a printer in Azure Worker Roles. I do know that I can install printers with basic batch commands. So I could define a batch script that would run as a startup task. something like: rundll32 printui.dll,PrintUIEntry /if /b "printer" /f %windir%\inf\ntprint.inf /r "file:" /m "printername") Question: Can I use a printer to print to file, maybe to local storage? I do need the function to print to file or atleast to have a printer installed, because I have to get the PCL output from different installed printers. Sadly I can not test it by myself. I do not have a CC to join the 90 days trial.

  Read the article

• On Windows 7, how can I tell if a recording is multi-channel without third party tools? [migrated]

  - by engineerchuan

  A customer has an audio that is confidential and can't send it to me. He also would not like to install other tools. He has a basic Windows 7 install. Is there any way to tell whether the recording is one channel or two channel? Normally, I would just get the audio and soxi it. Or, I would tell him to install Audacity or equivalent sound editor and open it up. I also thought that if you right clicked and looked at the size, bit rate, and length, you could get number of channels but bit rate already factors in number of channels. Sorry I'm not giving you a lot to work with.

  Read the article

• NFS compound failed for server foosrv: error 7 (RPC: Authentication error)

  - by automatthias

  I'm setting up an Ubuntu NFS server with a Solaris 10 client. The basic configuration looks okay to me, and it was also working for some time. I'm getting an "RPC: Authentication error" message on the client. server /etc/exports: /export/opencsw-future 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) /export/opencsw-current 192.168.3.0/24(rw,nohide,insecure,no_subtree_check,async) $ ls -ld /export/opencsw-current drwxr-xr-x 7 maciej maciej 4096 2012-02-05 14:55 /export/opencsw-current client $ grep opencsw /etc/vfstab foosrv:/opencsw-current - /export/opencsw-current nfs - yes - $ sudo mount /export/opencsw-current NFS compound failed for server foosrv: error 7 (RPC: Authentication error) (...repeated...) nfs mount: mount: /export/opencsw-current: Permission denied My server host name resolves to both IPv4 and IPv6 addresses.

  Read the article

• puppet agent doesn't retrieve files from master

  - by nicmon

  I have a very basic question regarding to Puppet 3.0.1 configuration. I setup a puppet master server (CentOS) with 2 agents (CentOS and Windows 7), all 3 can ping and access each other. There is no error at all. I have copied a file under /etc/puppet/files/test2.txt my site.pp (/etc/puppet/manifests) contains these lines: node default { include test file { "/tmp/testmaster.txt": owner => root, group => root, mode => 644, source => "puppet:///files/test2.txt" } } but there will no file be created on agent servers under /tmp/ once I run "puppet agent --test" here is the output: [root@agent1 ~]# puppet agent --test Info: Retrieving plugin Info: Caching catalog for agent1.mydomain.com Info: Applying configuration version '1354267916' Finished catalog run in 0.02 seconds "puppet apply /etc/puppet/manifests/site.pp" creates the testmaster.txt under /tmp/ on master.

  Read the article

• Connecting office to data center via Metro-ethernet

  - by Eric

  I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

  Read the article

• How *NAT* was Implemented in Home Based Routers ? [closed]

  - by Sumit Arora

  Different Types of Home-Based Routers Exist, and those routers provide NAT Feature as well e.g; and most of them are Port Restricted. Q-1 : What kind of Base Softwares Manufactures use to develop NAT Functionality ? Q-2 : Is that Technology Proprietary ? Or some Open-Source used to develop that e.g; Firehol ? Q-3 : I am looking for a software which works exactly like a NAT,and by doing very basic configuration it should work either Symmetric NAT, Port Restricted NAT or Address Restricted NAT ? So that I can test some of my Network Application which are dependent on NAT via this way on same PC ? e.g; I can test my developed ICE Algorithms

  Read the article

• YUM and RPM crash due to the liblua-5.1 library being missing

  - by A troubled linux newbie.

  I've been playing around with a LiveUsb install of basic Fedora with persistence. I attempted to install moonscript, which requires Lua and LuaRocks. After installing Lua and discovering there were flaws in the install which prevented LuaRocks from working, I used rpm to force Lua off so I could use yum to re-install it. The result was an error of this sort being yielded by both rpm and yum: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: liblua-5.1.so: cannot open shared object file: No such file or directory I've concluded from this that my Lua version installed a library which both yum and rpm are now connected to. Is there anyway to fix this without reformatting my drive and installing everything from scratch?

  Read the article

• How can I join two simple home networks together using an ethernet cable?

  - by Ilia Jerebtsov

  I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

  Read the article

• Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

  - by tlianza

  I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

  Read the article

• How to configure what certificates can be issued using Web Enrollment in Windows Server 2008 R2 Enterprise?

  - by antik

  I have a CA installed on of my Windows Servers in a small farm of systems. I've installed the Certification Authority Web Enrollment and Certificate Enrollment Web Service roles on the CA. I want to issue a Computer certificate to a computer not jointed to my domain. The user attempting web enrollment has domain credentials. The user was able to navigate to https://myServerHostname/certsrv and request a User certificate successfully. However, the user needs a Computer cert as well. From the certsrv site, the user tried the following: Advanced Certificate Request Create and Submit a Request to this CA However, the Computer certificate template is not available under the Certificate Template heading. He is only seeing "User" and "Basic EFS". How do I configure the CA to allow him to request a Computer cert for his system?

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >