Search Results

Search found 52450 results on 2098 pages for 'disk operating system'.

Page 232/2098 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

  • What is the most economic hardware that will run Ubuntu? [closed]

    - by nbolton
    I'm looking to buy the cheapest hardware I can find that will run the latest version of Ubuntu desktop on some sort of usable level (e.g. use of web browser, flash, etc). I guess small form factor would be pretty convenient, so I was looking at Acer Aspire Revo for example, but I'm not sure whether or not it's overpriced. I'd rather pay less for the same thing minus brand name if it's available. Any ideas? On further investigation, it seems I'm looking for a nettop.

    Read the article

  • Why do strace/truss sometimes 'fix' stuck processes?

    - by Emmel
    Sometimes you have a stuck process that's been stuck for a while, and as soon as you go to poke at it with strace/truss just to see what's going on, it gets magically unstuck and continues to run! So from merely 'observing' these programs have some impact in the running of the stuck programs .. what's happening here? Did strace (I guess via ptrace(2)?) send a signal, causing the program to cease blocking, or such? I've seen this several times -- most recently on Linux RHEL 4 (and a Perl script mucking with processes and doing some network IO in that case), but in a few other contexts as well. Unfortunately, I can't reproduce this, as it times to happen ... in times of crisis. But my curiosity remains. :-) Any elucidation appreciated.

    Read the article

  • Disk full, du tells different. How to further investigate?

    - by initall
    I have a SCSI disk in a server (hardware Raid 1), 32G, ext3 filesytem. df tells me that the disk is 100% full. If I delete 1G this is correctly shown. However, if I run a du -h -x / then du tells me that only 12G are used (I use -x because of some Samba mounts). So my question is not about subtle differences between the du and df commands but about how I can find out what causes this huge difference? I rebooted the machine for a fsck that went w/out errors. Should I run badblocks? lsof shows me no open deleted files, lost+found is empty and there is no obvious warn/err/fail statement in the messages file. Feel free to ask for further details of the setup.

    Read the article

  • Tool to monitor file size, file existence, parse xml, etc

    - by Artur Carvalho
    I'm trying to find some tool that helps me monitor several things. What are some requirements: Shows results on a web page. Checks existence of files/folders Checks sizes of files/folders Can parse xml files Can have several status depending if it's for instance, after 9pm Ping workstations/Servers to ensure they are on or off create daily/weekly/monthly reports (pdf, html, csv) show daily/weekly/monthly scheduled tasks check if specific users are logged in a machine check which users are logged in in a machine I've looked into some solutions but could not find what I wanted. Usually tools like nagios are more focused in servers, and spiceworks is not so specific. At this point I'm using a little powershell script that does several of these items, but before losing more time probably reinventing the wheel, what tools are out there? Thank you in advance.

    Read the article

  • What should I be doing while I wait for a progress bar?

    - by Malnizzle
    So I am sitting here waiting for a progress bar to run (20 mins or so), and was wondering how best to use my time as a SysAdmin. I debated not posting this question briefly, as this could get flagged as subjective, but I think it's an important question, and a question that can be legitimately answered (per the FAQ) I know this something a lot of sys admins deal with, especially if they are client-based I would venture to guess. There is a lot of material out there about how to multi task, but SysAdmin work is unique in this area as well. I could switch over to another project, but I could get wrapped up in that, and forget about the original project I was working on, and that's hard if you are billing a client for your time, both for tracking your time, as well as being fair to that client. I could check ServerFault, but that isn't directly work related, I could sort my email, so on and so forth. What do you do, or what should I do when I have time waiting for a progress bar? Thanks! (download done, back to work!)

    Read the article

  • what does "Net user administrator /active:yes" do to a computer?

    - by Rees
    i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

    Read the article

  • Why can't I create a public folder?

    - by Bryan
    I have a need to create a new Exchange public folder, as a sub folder to a folder that I'm already the owner of. When ever I try (from Outlook 2007) to create a new public folder, I'm told I don't have persmission. Outlook doesn't let me view the permissions of this folder, however it lets me view permissions of other folders that I'm owner of. Both ESM and PFDAVAdmin both report that my regular (i.e. non domain admin account) is the owner of the folder. Our set up is as follows: Exchange 2003 running on Server 2003, Windows 2008 R2 domain. Windows XP Desktop, Outlook 2007. Everything fully patched. What am I doing wrong?

    Read the article

  • How can I allow anonymous access to OTRS FAQ area?

    - by robbie
    I have been searching for this for quite some time now. I am using OTRS 2.4.7 and installed the FAQ package version 1.6.5. Everything seems to work fine. When I am logged in, I can create articles and other users have the ability to browse the articles. I want to be able to allow access to any anonymous non-user to be able to read these articles. Can anyone shed some light on how to allow this type of access? Thanks

    Read the article

  • Why can't I specify the executable that opens file with extension on windows?

    - by Glen S. Dalton
    I am on windows server 2003, but I guess it is the same on windows xp. This is a superuser question, because it is definitly desktop, so do not move or close it. Question: I copied some movable applications (usually people create them for usb sticks) to locations like c:\bin\app1\app1.exe app1.exe can open files of type *.ap1 When I rightclick file.ap1 and choose "open with ..." the "Open with" dialog appears. But it is not working how I expect in this situation. I can choose c:\bin\app1\app1.exe with the "Browse" button, but: app1.exe will not appear in the dialog where I just choosed it in the programs list, like I am used to it after clicking OK on it in the browse dialog. app1.exe will not open it when I click ok in the "Open with" dialog, the application that was assigned until then will still open it What could be the reason? Edit: Additional Information: my account is member of the administrators group I just changed the permissions of the folder c:\bin\app1\ and made sure that the group "Administrators" has all rights. I also inherited this manually to all subfodlers and subfiles.

    Read the article

  • Worth it to move /var to physical disk vs logical?

    - by Tammer Ibrahim
    Brief question about partition layout. I use an SSD for /, /boot, /usr, & /home partitions. I'd like to move /var to a mechanical disk to minimize writes to the SSD. I'm mainly concerned about maximizing drive life rather than maximizing performance (although I obviously wouldn't want to cripple my server). My mechanical disks consist of two drives sharing LVM, and a third used for nightly rsync backups. I also have a bunch of old 2.5in hard disks lying around. My question is, should I simply create a new LVM volume '/var' on my primary data store, or would it be worth the increased energy consumption (in terms of maximizing the lifetime of the LVMed drives) to install a low volume 2.5in disk to use just for /var? On a more general level my question is about the trade offs of placing OS mounts on the same physical volumes as my data. Thanks for any help!

    Read the article

  • sfdisk restore partition table if two hardisk have different sizes

    - by MA1
    What will happen if i try to restore the partition table of a larger hard disk to smaller hard disk, for example: partition table of 250GB hard disk to a 80GB hard disk using sfdisk like this. sfdisk /dev/sda < PartitionTable250.txt Will sfdisk detect it? I think there will be no problem if the partition table of a smaller hard disk is going to be restored on a larger hard disk?

    Read the article

  • xen-create-image does not create inird or initramfs image and domU does not starts with system image

    - by user219372
    I have Fedora 19 as Dom0. To create image I run # xen-create-image --hostname=debian-wheezy --memory=512Mb --dhcp --size=20Gb --swap=512Mb --dir=/xen --arch=amd64 --dist=wheezy After generation finished I start vm and see: # xl create /etc/xen/debian-wheezy.cfg Parsing config from /etc/xen/debian-wheezy.cfg libxl: error: libxl_dom.c:409:libxl__build_pv: xc_dom_ramdisk_file failed: No such file or directory libxl: error: libxl_create.c:919:domcreate_rebuild_done: cannot (re-)build domain: -3 In the /etc/xen/debian-wheezy.cfg i have # # Kernel + memory size # kernel = '/boot/vmlinuz-3.11.2-201.fc19.x86_64' ramdisk = '/boot/initrd.img-3.11.2-201.fc19.x86_64' and ls -1 /boot/*201* shows /boot/config-3.11.2-201.fc19.x86_64 /boot/initramfs-3.11.2-201.fc19.x86_64.img /boot/System.map-3.11.2-201.fc19.x86_64 /boot/vmlinuz-3.11.2-201.fc19.x86_64 Then if I fix ramdisk directive in .cfg file to /boot/initramfs-3.11.2-201.fc19.x86_64.img vm will start but os inside will not boot. In a tail of xl console I get [ OK ] Reached target Basic System. dracut-initqueue[130]: Warning: Could not boot. dracut-initqueue[130]: Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist dracut-initqueue[130]: Warning: /dev/fedora/root does not exist dracut-initqueue[130]: Warning: /dev/fedora/swap does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-root does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-swap does not exist dracut-initqueue[130]: Warning: /dev/xvda2 does not exist Starting Dracut Emergency Shell... Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist Warning: /dev/fedora/root does not exist Warning: /dev/fedora/swap does not exist Warning: /dev/mapper/fedora-root does not exist Warning: /dev/mapper/fedora-swap does not exist Warning: /dev/xvda2 does not exist Generating "/run/initramfs/sosreport.txt" Entering emergency mode. Exit the shell to continue. Type "journalctl" to view system logs. You might want to save "/run/initramfs/sosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report. dracut:/# .img files in /xen/domains/debian-wheezy exists and listed in disk section of debian-wheezy.cfg So what should i do? Update: I've found that xl does not mount images. In debian-wheezy.cfg I have that: root = '/dev/xvda2 ro' disk = [ 'file:/xen/domains/debian-wheezy/disk.img,xvda2,w', 'file:/xen/domains/debian-wheeze/swap.img,xvda1,w', ] And there is no /dev/xvda* or /dev/sda* or /dev/hda* files in VM.

    Read the article

  • Reasonable automatic HTML to PDF conversion (in UNIX/Linux environment)

    - by Alex Balashov
    Is there a way to generate PDF documents from HTML files automatically in Linux where the PDF offers some kind of reasonable level of resemblance to the input file? A command-line tool - as opposed to an interactive GUI of some kind - is key. I have tried htmldoc and some related cousins, of course. But these tools are hopelessly stone-age; htmldoc doesn't support CSS at all. You won't find a lot of HTML documents these days that don't have at least some CSS styling. I don't really care about stupid effects or minor embellishments, but the issue is that CSS is at the core of most layouts these days; not many folks are using 6 layers of nested tables anymore. So, if the conversion tool has no grasp of CSS whatsoever, it's not just a matter of "the document doesn't look quite right"; it is likely to not meet the minimum standard of usability at all. It has been suggested to me by some folks to try to use the Gecko rendering engine to generate images that can be converted to PDFs, but I have no idea how one would go about doing this, let alone easily. I have no trouble believing that there are good commercial tools that do this, but I'm really looking for an open-source package if possible, as the endeavour itself is an open-source one and doesn't pay. Thanks in advance!

    Read the article

  • How do I make more available space on a Time Machine hard disk?

    - by Daryl Spitzer
    I upgraded my MacBook Pro to Snow Leopard, and made some other changes that have caused my next Time Machine backup to be quite large. Previous to the upgrade my backup drive had filled up, so Time Machine was deleting old backups to make room for new ones. When Time Machine started the first backup after the upgrade, it displayed a message that it was freeing up space. But it wasn't able to free up enough: (The disk has 320 GB capacity.) How can I free up more space on the disk (without reformatting or deleting all the existing backups)? I don't want to recklessly delete files and take the risk of confusing Time Machine.

    Read the article

  • Why can't I open file with doubleklick after I moved the application that opens it on windows?

    - by Glen S. Dalton
    I am on windows server 2003, but I guess it is the same on windows xp. I moved some movable applications (usually people create them for usb sticks) to locations like c:\bin\app1\app1.exe. The old location was c:\programs\app1\app1.exe app1.exe can open files of type *.ap1 When I rightclick file.ap1 and choose open with ... the Open with dialog appears. But it is not working how I expect in this situation. I can choose c:\bin\app1\app1.exe with the "Browse" button, but: app1.exe will not appear in the dialog where I just choosed it in the programs list, like I am used to it after clicking OK on it in the browse dialog. app1.exe will not open it when I click ok in the "Open with" dialog, the application that was assigned until then will still open it What could be the reason? my account is member of the administrators group I just changed the permissions of the folder c:\bin\app1\ and made sure that the group "Administrators" has all rights. I also inherited this manually to all subfodlers and subfiles. I also tried to move the application (with the whole folder) to "c:\program files\app1\app1.exe

    Read the article

  • Where is the encfs volume key stored?

    - by Waldorf
    I am trying to use encfs in reverse mode. I understand that the passphase is used to encrypt a key which is then stored encrypted into the encfs6.xml file. What I do not understand is the following. Create en encrypted virtual fs of a folder by using passphrase A unmount this folder. Delete all contents including the encfs6.xml file If you then try to do the same with another passphrse I would expect that a new encfs6.xml would be created. However I get the following error message: "Error decoding volume key, password incorrect" So I wonder, what volume key is incorrect, I thought it was in the encfs6.xml file ?

    Read the article

  • How to force a "do you really want to shutdown?" dialog in Windows 7?

    - by Vokuhila-Oliba
    Sometimes I want to choose "Logout current user", but then I hit "Shutdown" by accident. Nearly everywhere else Windows 7 is asking "do you really want to do this? Yes/No" - but that's not the case when I hit the "Shutdown" button. Windows 7 shuts down immediately without giving me the chance to correct my mistake. So I am wondering - why does Windows shut down immediately without asking "really do that?" in this case? Is there a way to change this behavior? For example, could I force Windows to display a dialog asking "Do you really want to shutdown?"? I tried to change this behavior with the policy editor. It seems to be very easy to completely remove the Shutdown button from the Start menu, but I couldn't find an entry to turn on such a Yes/No dialog.

    Read the article

  • Why is the latency on one LVM volume consistently higher?

    - by David Schmitt
    I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

    Read the article

  • Remove the Microsoft Security Essentials icon

    - by unam3d
    I've been using Microsoft Security Essentials on Windows 7 for sometime now and so far I don't have a bad word to say about it. I would like to permanently remove the MSE icon from the task bar and pop-up box, though I would still like to be informed when it detects a threat, etc.

    Read the article

  • My website is infected, I restored a backup of the uninfected files, how long will it take to un-mark as dangerous?

    - by Cyclone
    My website www.sagamountain.com was recently infected by a malware distributor (or at least I think it may have been). I have removed all external content, google ads, firefly chat, etc. I uploaded a backup from a few weeks ago, when there was no issue. I patched the SQL injection hole. Now, how long will it take to unmark it as dangerous? Where can I contact google? I am not sure if this is the right place to post it, but since it may have been a server issue I may as well. Can sites inject base64 code via a virus on the whole server, or is it only via sql injection? Thanks for the help, viruses freak me out. Is there an online virus scanner that can scan my page and tell me what is wrong?

    Read the article

  • Cobalt Qube 3 Unresponsive

    - by Devin Gund
    I recently bought a used Cobalt Qube 3 server off of eBay. The seller listed it as working before it was shipped. After starting it up for the first time, the "Cobalt Networks" logo scrolled across the LCD screen (this is normal), but then it stayed there. It will not go away, and the server will not respond to any of the buttons besides turning it off. I read the manual, and it does not say anything about this normally occurring. If necessary, could anyone walk me through or provide links to a reset tutorial? I have the OS Restore CD. Please help? I'm not sure why my question is being downvoted but if you need any more information please comment.

    Read the article

  • check history of cpu/memory usage in ubuntu?

    - by johnlai2004
    Is there a way for me to review cpu or memory usage on my ubuntu linux server? I've noticed my server (lamp set up) being slow at times, but by the time I log in as root and run a PS command, everything may have returned to normal. It would be great to review a log of what resources different parts of the server consumed.

    Read the article

  • How to estimate a server specifications for this particular system? [on hold]

    - by Alvaro Fallas
    I'm working in a college project and I'm supposed to specify the server's hardware to hold a system. The system is some kind of social network. And it is supposed to hold around 100 000 users the first year, also the system must be able to handle 1000 users working at the same time. It is the first time I'm asked to do something like this, so I hope you can give me a hand and help me because I feel a little lost. The system's data base is Mysql. I found some server configurations offered by Amazon Web Services, but I don't know which of them is the better for my system due to lack of experience Hope you can help me.

    Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >