Search Results

Search found 13293 results on 532 pages for 'small ticket'.

Page 232/532 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

• My Macbook Pro doesn't give any reaction when pressing the power button

  - by Juri

  An hour ago I closed the display my Macbook Pro. it goes into sleep mode. After dinner I returned, opened the display and wanted to continue with my work, but I recognized it was switched off completely. I tried to press the power button and received nothing. I also noticed that the green light on the power supply plug which is plugged into my Macbook is off. Same thing with a power supply from the Mac of a friend of mine. What could I try? Some suggestions? What could be the problem here?? I already tried using the battery to start, no success, also taking the battery out completely, no success. Even if I press the small button for showing the current battery charge, none of the leds starts. It's like the Mac is completely dead.

  Read the article

• What 64bit Desktop Linux (gui) Distribution can I run on an intel processor, especially in virtualbox on mac os x?

  - by cwd

  What 64bit Desktop Linux (GUI) Distribution can I run on an intel processor, especially in VirtualBox on Mac OS X? Ubuntu 32bit works well. ubuntu 64bit is for amd64 only, I think. I know Mac OS X is 64 bit Linux. This is not what I'm asking about. It would be lovely if you could recommend a small install, or one that has a live cd version. Update: I tried downloading the ubuntu-10.10-desktop-amd64.iso package and this is what i get:

  Read the article

• Is there a convenient way to manually copy the Log Shipping *.trn files from one SQL 2008 server to

  - by Rick

  We have a remote SQL 2008 server (ServerB) that needs to keep a warm (15 minute interval is OK) copy of production data (ServerA). ServerA is also SQL 2008. Log Shipping looks like it will do the job. We can only get to the destination ServerB with remote desktop. Is there a way to set this up when we can't get to both servers from one Management Studio? We want to be able to temporarily (until a VPN is setup between our network and the ServerB network) manually export a small .trn file, copy it via remote desktop to ServerB and then manually import those transactions from the .trn file. My supervisor says he saw a post saying this is possible. We were just trying to avoid doing a full database backup and copying that every time. Thanks in advance for any suggestions on this.

  Read the article

• How do you partition a USB Thumb / Flash Drive?

  - by Omar Shahine

  Out of the box, Windows will not allow you to partition a USB Thumb / Flash Drive. How can you do this? In case anyone is wondering Why you would do this? It's interesting in the case of a BitLocker ToGo drive where you can take a large thumbdrive (like 4 or 8 GB) and format a small amount of the drive to be used normally as a Fat32 drive and leave the remaining partition encrypted using BitLocker. This allows you to keep some non secret data on the unencrypted partition(like portable apps).

  Read the article

• POST data not being received

  - by Alexander

  I've got an iPhone App that is supposed to send POST data to my server to register the device in a MySQL database so we can send notifications etc... to it. It sends it's unique identifier, device name, token, and a few other small things like passwords and usernames as a POST request to our server. The problem is that sometimes the server doesn't receive the data. And by this I mean, its not just receiving blank values for the POST inputs but, its not receiving ANY post data at all. I am logging all POST inputs to my server into some log files and when the script that relies on the POST data from the device fails (detects no data) I notice that its because NO POST data was sent. Is this a problem on the server, like refusing data or something or does this have to be on the client's side? What could be causing this?

  Read the article

• Windows Server 2003 Router with PortForwarding

  - by jM2.me

  Hello, I am owning a small company and we have purchased a server to setup few server applications on it as well as other software. We would like to setup our network in following way Internet<-WindowsServer2003 as router<-Switch<-Office Computers Server has two nic interfaces and we have 24ports 1GB network switch connected to one nic and internet connection to another nic. Our ISP is Frontier and we have Fios 25/25. We get network cable out of ONT box directly connected to our server. There are no modems/routers. Setting up DHCP on windows 2003 is easy job but we would like to have the ability to port forward some ports from office computers. I have some knowledge in networking but not as much. How could I setup FHCP server on win2k3 with the ability to port forward some ports to office computers? Thank you for your time

  Read the article

• Simple, manageable DNS on EC2?

  - by dkulchenko

  I'm working on a large network of servers sitting on EC2, and need a way for the servers to know about each other's locations in the cloud. I thought the simplest way would be to use DNS, because if I replace the EC2 instance, I simply update the DNS record, and the rest of the servers will know about it (with names like users.db.mysoft.com, routing.mysoft.com, cluster1.memcached.mysoft.com). I'm considering setting up a master DNS server on a micro/small instance to accommodate this. I'd preferably need something that's as simple as a key-value store (hostname - IP) into which the platform could remotely add/remove entries. Can I do this with BIND? Or is there a better solution?

  Read the article

• Recommended Configuration to setup Tomcat 7 on windows OS

  - by yashbinani

  I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

  Read the article

• VMware Virtual vCenter and High Availability

  - by rufo

  To continue with this question: Should be Vmware vCenter server high available? According to the response there even if vCenter is down HA will continue to work. So, if my vCenter is a VM, using the express sql edition in the same VM, and that VM is hosted in the same cluster it manages (and the cluster is setup for HA): Am I correct to assume that if the host that hosts the vCenter goes down HA will vmotion the vCenter VM to another host and it will continue to function? BTW: my environment is small, two ESXi 5.0 hosts, with about 50 VMs, using iSCSI shared storaged for everything.

  Read the article

• unwanted password prompt pops up on web server?

  - by Paul

  my web server randomly asks for a password as though basic authentication is turned on. It's an IIS 7 web server and you have to specifically install basic authentication in the roles section. It isn't installed. The message that pops up is "Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)" I cannot reproduce the problem but a number of customers have reported the problem and it only seems to appear to a small number of customers. It pops up when they visit the homepage, nothing is generated by the IIS logs to indicate a password box is being served (e.g. no 401 errors etc) Can anyone offer any advice? Thanks

  Read the article

• Linux bash: when to use egrep instead of grep?

  - by Michael Mao

  Hi all : I am preparing for a Linux terminal assessment now, I tried to Google and found most resources are referring to the basic "grep" rather than the more powerful "egrep" -- well, that is at least what the professor said in lecture. I am always working with small samples so performance tuning is a thing too far away. So basically I'd like to know are there any areas where I must switch to egrep to do it in a better way? Is it safe to work with basic "grep" as for now? will there be potential risks? Sorry about my limited knowledge on Linux shell commands, the man page looks like a maze to me and honestly I haven't put much time in understanding all the features both command provide.

  Read the article

• XSP2 hangs after some time

  - by Sebi

  I'm running a REST/JSON webservice (SVC) using xsp2 (and xsp2 through Apache/mod_mono). After some hours, the service just hangs and outputs a timeout after about 5 minutes. This can only be solved by restarting xsp2. Sometimes multiple restarts are needed to get it running again. I've made a small sample webservice simply returning a "pong". The example is available in the bug report: https://bugzilla.novell.com/show_bug.cgi?id=608158 The bug can sometimes be reproduced following these steps: Steps to Reproduce: 1. start xsp2 (webservice) 2. request http://[server]/WSPing.svc/ping Actual Results: After some time, I always get timeouts. I'm running a gentoo linux as a XEN DomU and i'm using Visual Studio to build and publish the service. Any hints???

  Read the article

• Horrible performing RAID

  - by Philip

  I have a small GlusterFS Cluster with two storage servers providing a replicated volume. Each server has 2 SAS disks for the OS and logs and 22 SATA disks for the actual data striped together as a RAID10 using MegaRAID SAS 9280-4i4e with this configuration: http://pastebin.com/2xj4401J Connected to this cluster are a few other servers with the native client running nginx to serve files stored on it in the order of 3-10MB. Right now a storage server has a outgoing bandwith of 300Mbit/s and the busy rate of the raid array is at 30-40%. There are also strange side-effects: Sometimes the io-latency skyrockets and there is no access possible on the raid for 10 seconds. The file system used is xfs and it has been tuned to match the raid stripe size. Does anyone have an idea what could be the reason for such a bad performing array? 22 Disks in a RAID10 should deliver way more throughput.

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• iDeneb OS X Issues

  - by Charlie Somerville

  This afternoon I installed OS X Leopard on my computer through iDeneb. It mostly worked, but I have a few issues. Firstly, it doesn't seem like it's detecting my graphics card properly. I have a Nvidia 8800GT 512mb installed. As you can see in the screenshot below, it's not detecting it and limiting me to a resolution of 1024x768 (which is a pain in the arse to use) Secondly, I don't have any sound. It's not a massive issue like the graphics issue above, but I'd still like to get it rectified. Thirdly, (this is a very small one) my numlock light doesn't seem to be functioning. I don't really care as the numpad still works, but it would be nice to have the numlock light working. Can anyone lend a hand with any of those problems? Thanks. (bump for great justice)

  Read the article

• Strange Inode/Ram cache drops happening in CentOS

  - by FunkyChicken

  I run a CentOS 5.7 machine (64bit) with 24GB ram and 4x SAS drives in RAID10 setup. This machine runs nginx/1.0.10, php-fpm & xcache. About a month back the RAM usage of this machine has changed. About every few hours the 'CACHE' is flushed from the RAM, this happens exactly when the 'Inode table usage' drops. I'm pretty sure these drops are related. (see the 2 attached images). This server hosts quite a lot of small files (20M all a few KB big). Not many files are deleted (maybe 100 per hour (total size a few MB max)), not enough to account for the huge Inode table drops. I also have no crons running which could cause these drops. Sar -r output: http://pastebin.com/C4D0B79i My question: Why are these huge RAM/Inode usage drops happening? How can I get Nginx/PHP to use all of my servers RAM?

  Read the article

• For large files compress first then transfer or rsync -z? which would be fastest?

  I have a ton of relativity small data files but they take up about 50 GB and I need them transferred to a different machine. I was trying to think of the most efficient way to do this. Thoughts I had were to gzip the whole thing then rsync it and decompress it, rely on rsync -z for compression, gzip then use rsync -z. I am not sure which would be most efficient since I am not sure how exactly rsync -z is implemented. Any ideas on which option would be the fastest?

  Read the article

• Export a single layer as an image in Photoshop

  - by wrburgess

  I have a lot of designers send me layered PSDs of their designs and I need to break out the pieces of the designs to place on web pages. I can do a decent number of things in Photoshop, but I'm hardly efficient with it. My old way of just copying the image that's in a layer and pasting into a new image seems to take forever as I screw around with cropping and such. I've got Photoshop CS5, so I don't need external software to do anything, but I just need to figure out how to take a single layer, that may hold something small like an icon, and export it as a PNG or JPG. I am aware of the script called "Export Layers to Files" but it took about an hour and exported ALL of my layers to a huge number of files. I wasn't looking for a solution that broad. Is there an easy way to do this?

  Read the article

• How to enlarge a .PDF document to better show it in a Kindle 6"?

  - by Gus

  I have a kindle 6". The problem is that I often read pdf files that are technical, therefore, it doesn't get converted very well to kindle's native format (for example, code blocks get messed, and things like that). When I view the pdf page, it's very small to read easily, so I have to rotate the screen to a horizontal position in order to see it better, but my page get divided. But some documents would be easy to read in vertical position if I had the chance to enlarge the font size a little bit in a external pdf editor, therefore enabling the reading in the vertical orientation. Has anybody had the same situation? Is there a solution for that?

  Read the article

• Public folder emails not being delivered

  - by Rob

  Hello, We have just introduced an Exchange 2010 installation into our existing Exchange 2003 (all standard) environment. We make a lot of use of our Public Folders in 2003, so I am wanting to make a small PF tree in the 2010 system to test some applications against. I have created a few public folders in the 2010 public folder management tool, and mail enabled them, gotten email addresses, etc. However, mail will not be delivered, it queues on my existing 2003 Exchange server's 'Local Delivery' queue, and eventually times out and bounces. I guess the Exchange 'system' including the new 2010 server thinks that all public folder email must need to be delivered to the old 2003 server. Is it possible for me to have two public folder databases that each receive mail? If so, is there something I am missing to enable this? Thanks -R

  Read the article

• Testing domains on intranet/local network?

  - by meder

  This may sound like a very silly question, but how could I setup domains ( eg www.foo.com ) on my local network? I know that all a domain is, is just a name registered to a name server and that nameserver has a zone record, and in the zone record there are several records of which the A Record is the most important in dictating where the lookup goes to, which machine it should point to. I basically want to make it so that I can refer to my other computer/webserver as 'www.foo.com' and make my local sites accessible by that, mess with virtualhost records in Apache and zone records for the domain except locally so I can explore and fiddle around and learn instead of having to rely on the domains I own on a public registrar that I could only access through the internet. Once again I apologize if this is a silly question, or if I'm completely thinking backwards. Background information: My OS is Debian, I'm a novice at Linux. I've done very small edits in zone records on a Bind9 Server but that's the extent of my networking experience.

  Read the article

• Chromium always starts as floating in awesome.wm

  - by xhochy

  I'm using awesome as window manager for a small surf&info terminal. Chromium is started directly after login on the first workspace and should be displayed fullscreen. I've set the layout of all workspaces to awful.layout.suit.max and followed Awesome FAQ so that Chromium and all other (automatically) started programs will be shown on the right workspace. All programs except Chromium will start correctly in fullscreen mode. I tried { rule = { class = "chromium-browser" }, properties = {floating = false, tag = tags[1][1]}} and { rule = { class = "chromium-browser" }, properties = {tag = tags[1][1]}} but Chromium will always start in floating mode. This is a bit annoying as you still see awesome's panel at the top.

  Read the article

• SBS 2008 DNS issues in BPA

  - by evesirim

  I'm gettng constant Critical Issue events in the Small Business Server Best Practices Analyser & resulting SBS Console reports that begin "The DNS client is not configured to point only to the internal IP address of the server.". When I check the DNS Manager, there are two separate IPs listed, one ***.***.***.2 and the other ***.***.***.28. I have checked online after an ipconfig /all and have found the reason for this to be that the second IP is created by DHCP for RAS & VPN purposes. It seems to cause no conflicts of any detrimental result apart from constantly sending me error messages and alerted reports. Does anyone know of a way that I can change settings somewhere so that Windows accepts this second IP, or at least stops alerting me of its prescence? Perhaps a registry hack of some kind...? Many thanks in advance

  Read the article

• Toolkit & Habits for Linux Network & System Administration [closed]

  - by slashmais

  I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

  Read the article

• Chatbox/shoutbox/forum with the following features.

  - by Mick

  I would like to set up a simple forum for a small number of users. The features I would like are the following, in order of priority: logging on not compulsory for posting. A single thread. All the messages are immediately visible - no need to "open" them. most recent message at the top by default. The ability to give selected users the power to delete spam messages. The ability to upload photos. Avatars. Configurable skins/size/shape. So far the closest I have come is www.tag-world.com but there are no avatars and no photos.

  Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >