Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 233/1884 | < Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• Ubuntu: Take actions when system temperature gets too high

  - by Josh

  One of the CPU fans on my Compaq Presario laptop running Ubuntu 9.10 seems to have bit the dust. The fan is deep within the case and I intend to replace the laptop in the next 6 months so it's not worth replacing it. I have the laptop on a cooling pad and most of the time the system is fine, CPU temps around 90°-110°F. Occasionally, however, I'm seeing random lockups which I believe is due to the system overheating. How can I configure the system to: Lower the CPU speed when the temperature reaches a certain level? (I.E. 110°F) Shutdown the system when the tempature reaches a critical level? (And what would that be? 130°?)

  Read the article

• new ubuntu server installation - java server not receiving packets

  - by James

  I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

  Read the article

• HOW TO RECOVER A WWW DIRECTORY AND INCLUDED FIELS IN UBUNTU 9.04

  - by Al Mubarak

  hai., i'm using ubuntu 9.04 for drupal development. today morning accidentally i removed my www folder in directory. the folder has so many of my web development documents. O God., I just restart after my system when it happens., and i install some recovery software like gpart. is theri any possibilities to recover my www directory and files., bcos its includes more of web development documents. pls pls pls i'm very afraid about that issue. let me know asap. Thanks in Many more advance,

  Read the article

• nvidia twinview in ubuntu with large resolutions not working

  - by knittl

  i bought an external monitor and can't get it to work properly with my laptop screen. my laptop screen has a resolution of 1920x1200 and the new monitor has 1920x1080 when i open nvidia-settings and select the maximum resolution for each of the screen, one screen will always stay blank. if i select a smaller resolution for one of the two it will work. 1920x1200 + 1440x900 = works 1680x1050 + 1920x1080 = works 1920x1200 + 1920x1080 = doesn't work (but that's what i want to have!) my graphics card is an 01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 360M (rev a1) (output from lspci), driver is proprietary nvidia driver, operating system is ubuntu. any help greatly apreciated

  Read the article

• T61, NVidia, Ubuntu 9.10 == Video problems

  - by David Lazar

  Hi, Upgraded to latest Ubuntu, currently 9.10. Videos used to work fine. Now, playing videos using VLC or any other media player shows them 'sepia' tinged when playing. This is annoying. I remember this used to happen on occasion (after resuming from suspect), and I forget what I fiddled with to make it better. Does anyone have the method to force video to render correctly with this combination? It happens even after a reboot. Thanks

  Read the article

• Configuring ejabberd on ubuntu ami of amazon ec2

  - by andy

  This is my first experience with ejabberd. Spare me if I miss anything. I have installed ejabberd server on ubuntu 12.04 AMI on Amazon EC2. I have successfully installed the server, added the admin user and host in the config file and opened up reqd ports (5222, 5223, 5269, 5280). Now I tried to login the web admin interface using the admin user id and password. I could log in, BUT I could only see one section, Virtual Hosts. No Control Lists, Access rules, Nodes and Statistics Menu items on the left. Also, when I click Virtual Hosts Menu item, the page that comes up does not show anything. Here are the screenshots

  Read the article

• Limit ftp users to only certain directories in Ubuntu

  - by George

  There are several questions around limiting ftp users to certain directories. However, most of them refer to vsftpd, which I don't think I have installed on my system. I'm running Ubuntu 9.04. How can I tell what ftp service I have installed, and then limit certain users to only the /home/ftpuser directory instead of having full access to the file system? I think I can add them to a separate group and give that group access to the proper directories, but then do I have to remove that groups permissions from all other directories? It seems like there should be an easy way like setting the chroot_local_user value in the /etc/vsftpd/vsftpd.conf file, but that doesn't exist on my system.

  Read the article

• Mount encrypted hfs in ubuntu

  - by pagid

  I try to mount an encrypted hfs+ partition in ubuntu. An older post described quite good how to do it, but lacks the information how to use encrypted partitions. What I found so far is: # install required packages sudo apt-get install hfsprogs hfsutils hfsplus loop-aes-utils # try to mount it mount -t hfsplus -o encryption=aes-256 /dev/xyz /mount/xyz But once I run this I get the following error: Error: Password must be at least 20 characters. So I tried to type it in twice, but that results in this: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key (256 bits) not supported by kernel Any suggestions? Thx Edit: One thing I'm not sure about is whether I use the right password. My assumption is that it is my default one for these situations. But I'm not sure whether Max OSX choose another password (internally) for that.

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Ubuntu 12.04 Server: permissions on /var/www for newly copied files

  - by Abe

  I ran the following commands to set up ACL on the /var/www folder in my Ubuntu 12.04 Server: sudo usermod -g www-data abe sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I downloaded Wordpress using wget in my /var/www folder and unzipped the downloaded file: cd /var/www wget http://wordpress.org/latest.zip mv latest.zip wordpress.zip unzip wordpress.zip I created a new database and user in mysql and attempted to run the setup process through the web interface. When I enter the configuration info in wordpress I run into the following error message: Sorry, but I can't write the wp-config.php file. When I run ls -la, I see that the files are owned by my user abe, but they are part of the group www-data. Would I have to run the chmod command every time I copy new files to /var/www? sudo chmod -R 775 /var/www

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Set up a root server using Ubuntu and Virtualization

  - by Daniel Völkerts

  Hello, I'd like to setup a fresh root server and install a linux based virtualization on it. My thoughts are on: Intel VTs Hardware Ubuntu 9.10 KVM based virt. The access to the root server will only be SSH for Administration. Has anybody done this before, what was your glues discovered in the daily use? My requirements are: very secure, so the root server only has ssh to the dom-0 and minimalistic ports for the guest (e.g. http/s). good monitoring of host/guest (my idea is to using zabbix for it) easy and fast administration (how are the command line tools working for you? cryptiv? high learning curve?) I'm pleased to learn from your suggestions. Regards, Daniel Völkerts

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Hosting services on ubuntu server VM

  - by Trevor Hartman

  I've got OSX Server running on a macbook, and I'm looking to run an ubuntu server VM on it via Parallels. I'm thinking about hosting all my apache inside linux, and possibly some other services. I'm curious what a viable config would be, having not done this before. I need to do bridged network right? How do I direct web traffic to the VM instead of OSX? Haven't got my head wrapped around how this works yet so any help would be appreciated.

  Read the article

• Ubuntu make symbolic link between new folder in Home to existing folder

  - by Fath

  Hello, To the point. I have Ubuntu Maverick running on my Lenovo G450. Before, it was Windows 7. All my data are inside another partition, its NTFS. FSTAB line to mount that partition : /dev/sda5 /data ntfs auto,users,uid=1000,gid=1000,utf8,dmask=027,fmask=137 0 0 Inside /data there are folder Musics, Graphics, Tools, Cores, etc. If I'm about to create new folder, let see, GFX on /home/apronouva/GFX and make it link or pointing to /data/Graphics, how do I do that ? So when I open /home/apronouva/GFX the content will be the same as inside /data/Graphics .. and whatever changes I made inside GFX, it will also affect /data/Graphics I tried : $ ln -s /data/Graphics /home/apronouva/GFX it resulted : error, cannot make symbolic link between folder Thanks in advance, Fath

  Read the article

• Ubuntu Chromium bookmark icons blank

  - by Matt Parkins

  Ever so often I load Chromium and it refuses to load my profile. Now that doesn't happen any more but since then it refuses to load the icons for my bookmarks which, if you look at the attached pic, is my only way of identifying which icons do what (other than hover for tool-tip, or actually pressing the icon button). The other possible variable is that the bookmarks are meant to sync with Google sync - I'm not sure if that is a factor. How do I restore the icons to my bookmark bar? Chromium version: Version 20.0.1132.47 Ubuntu 12.04 (144678)

  Read the article

• Ubuntu 10.10: getting appropiate monitor resolution for lcd hdtv

  - by lurscher

  I'm running Ubuntu 10.10 x86_64 version, with Nvidia 9800 GT, installed 270.41.06 Nvidia drivers following this guide. I have a LG42LH30FR LCD TV connected with the dvi link - RGB PC input I'm able to get 1024x768 resolution without overscan (I can get 1080i = 1366x768 but there is a lot of hidden screen space to the right and I don't know what to do about it). I want to get full HD I can get full HD (1080p = 1920x1080) on Windows XP 64-bit with custom resolution created with Nvidia Control Panel, from reading over xorg.conf configurations it seems I need to add a certain modeling to the monitor configuration, but I don't know where to get the appropriate options for this task any suggestions?

  Read the article

• Installing maven on Ubuntu by manual download

  - by WebDevHobo

  To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• How do I set up a bridge on Ubuntu GNOME 14.04

  - by NJRandy

  I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

  Read the article

• How do I clone an Ubuntu server under VMWare

  - by dave

  I have a Ubuntu 12.04 server running under VMWare. As best as I can tell, the VMWare vmbk file has been corrupted. The server is operating normally, but this is preventing backups (using Veeam). To remedy this, I'd like to create a duplicate VM without the corruption issue. However, with the corrupted file VMWare can't help me, eg. create a simple clone. I can create a new VM. How do I clone the configuration / data from my problematic server into the new one? Updated: just to clarify: I realise I can't use the VMWare clone tools. I will manually create a new VM (with a base O/S if necessary). How to I replicate the O/S and data from one VM into another?

  Read the article

• Watch Filesystem in Real Time on OS X and Ubuntu

  - by Adrian Schneider

  I'm looking for a CLI tool which will watch a directory and spit out the names of files that change in real time. some_watch_command /path/to/some/folder | xargs some_callback I'm aware of inotify (inotify-tools?) and it seems to be what I need, but I need something that is both Linux (in my case Ubuntu) and OSX compatible. It doesn't need to be lightning fast, but it does need to trigger upon changes (within a second is reasonable). Also, I don't necessarily need the exact CLI program mentioned above. If some underlying tech exists and is easily scriptable on both platforms that would be great too.

  Read the article

• Compiling Ubuntu server: "libQtGui.so: undefined reference to png functions" errors

  - by Kowalikus

  I want to compile wkhtmltopdf on Ubuntu Server, but I have a problem with following errors: /usr/lib/libQtGui.so: undefined reference to `png_read_info@PNG12_0' /usr/lib/libQtGui.so: undefined reference to `png_set_gAMA@PNG12_0' /usr/lib/libQtGui.so: undefined reference to `png_set_PLTE@PNG12_0' ... /usr/lib/libQtGui.so: undefined reference to `png_create_info_struct@PNG12_0' /usr/lib/libQtGui.so: undefined reference to `png_set_bgr@PNG12_0' /usr/lib/libQtGui.so: undefined reference to `png_get_valid@PNG12_0' What can I do? in /usr/lib lrwxrwxrwx 1 17 2010-02-17 15:00 libQtGui.so -> libQtGui.so.4.5.2 lrwxrwxrwx 1 17 2010-02-17 14:59 libQtGui.so.4 -> libQtGui.so.4.5.2 lrwxrwxrwx 1 17 2010-02-17 14:59 libQtGui.so.4.5 -> libQtGui.so.4.5.2 -rw-r--r-- 1 10071604 2009-10-14 23:34 libQtGui.so.4.5.2

  Read the article

< Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >