Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 237/318 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• how to install Ubuntu on a fresh hard drive

  - by Herman Wiegman

  I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

  Read the article

• Oracle Loader for Hadoop 1.1.0.0.3

  - by mannamal

  We are pleased to announce availability of Oracle Loader for Hadoop 1.1.0.0.3, containing bug fixes and performance improvements to Oracle Loader for Hadoop. The updated product can be downloaded from here: http://www.oracle.com/technetwork/bdc/big-data-connectors/downloads/big-data-downloads-1451048.html Note that the Oracle Loader for Hadoop 1.1.0.0.3 kit is a complete kit containing the product and bug fixes. Fixes of the earlier version 1.1 patch releases are also included. Upgrading to Oracle Loader for Hadoop 1.1.0.0.3 (from versions 1.1.x): On the Oracle Big Data Appliance:  1. 1.  Upload the new oraloader rpm to the first Oracle Big Data Appliance server.  For example:   /tmp/oraloader-1.1.0.0.3-1.x86_64.rpm 2.     As the root user, use dcli from the first Oracle Big Data Appliance server to copy the new rpm to all nodes. For example:   #dcli -f /tmp/oraloader-1.1.0.0.3-1.x86_64.rpm  -d /tmp/oraloader-replace.rpm 3. 3.  As the root user, use dcli from the first Oracle Big Data Appliance server to replace the old oraloader rpm with the new one.  For example:  #dcli "rpm -e oraloader ; rpm -Uvh /tmp/oraloader-replace.rpm" On other hardware: 1. 1.  Unzip oraloader-1.1.0.0.3.x86_64.zip at <location of install> 2. 2.  Update OLH_HOME to point to <location of install>/oraloader-1.1.0.0.3 

  Read the article

• How much overhead is there in persistent connections?

  - by nynex

  Ok so I'm musing over a little side project I want to start. Essentially its a multi-session web based FTP client. Multi-session in that you can log into several FTP servers at the same time and perform operations like moving a file from one FTP server to another. I'm doing this mainly to brush up on the new webdev technologies, particularly websockets. I'm using node.js + socket.io to keep a persistent bi-directional connection between the web browser and the web server. The web server will also have persistent connections to each FTP server the user has logged into. So if there are 100 concurrent users each logged into 5 ftp accounts, the web server will have 100 websocket connections + 500 ftp connections. Is servicing 600 connections a lot? I know it depends on the hardware resources of the server but is something like this doable on a budget? Are there more efficient means of doing something like this? I know its unlikely that this project will really get popular but I want it to scale well regardless. Thanks for any help, I've still got a lot to learn.

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Ask the Readers: How Do You Monitor Your Computer?

  - by Jason Fitzpatrick

  Beneath the shiny case of your computer and GUI of your operating system there’s a lot–CPU utilization, memory access, and disk space consumption to name a few things–you can keep an eye on. How do you keep an eye on resource utilization and more on your computer? Image available as wallpaper here. Whether you’re carefully managing a small pool of RAM, making sure your abundant apps don’t bog down your processor, or you just like having an intimate view of what’s going on in the guts of your computer, we want to hear all about the tools you use to do it. How and why do you monitor your computer? From disk use to case temps, any kind of monitoring is fair game. Sound off in the comments with the how and why of your monitoring arrangement and then be sure to stop back in on Friday for the What You Said roundup to see what tricks and tools your fellow readers are using to keep an eye on their hardware. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• Issues in pulse audio in Ubuntu 11.10

  - by Kamal

  Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

  Read the article

• Tipps & Tricks rund um CRSCTL

  - by Sebastian Solbach (DBA Community)

  Egal ob Single Instanz oder für Real Applikation Cluster Datenbanken die Grid Infrastruktur findet man bei immer mehr Systemen im Einsatz. Das liegt sowohl an der vereinfachten Überwachungstätigkeiten für die Oracle Datenbank, Listener und ASM Instanz, als auch an einigen weiterführenden Features, wie der einfachen Service Verwaltung für Single Instanz, DataGuard und/oder RAC. Dabei kommen insbesondere den Cluster Ready Services (CRS), einem Bestandteil der Clusterware Komponente der Grid Infrastruktur, eine wichtige Bedeutung zu, da diese intern alle Ressourcen steuert. Ressourcen können hierbei natürlich nicht nur die Oracle Prozesse (Datenbank, Listener, Virtuelle IP Adressen etc.) sein, sondern auch eigene Applikationen, die unter die Überwachung der Grid Infrastruktur resp. Clusterware gestellt werden. Dies kann von simplen Neustartanforderungen im Single Server Betrieb bis zu klassischen Failover Szenarien in Clusterumgebungen reichen. Diesem Aspekt trägt auch die Tatsache Rechnung, dass es seit einiger Zeit generische Applikations-Agenten (Siebel, Tomcat, GoldenGate, Apache, ...) für die Clusterware gibt und eine abgespeckte GI Installation auf der Oracle eigenen Middleware Hardware (Exalogic) läuft, um die Prozesse zu überwachen. Diese Cluster Ready Services werden vom Befehl "crsctl" gesteuert. Deshalb lohnt es sich dieses Utility mal genauer anzuschauen, zumal es einige Feinheiten enthält, die nicht direkt aus der Dokumentation bzw. Hilfe des Tools ersichtlich sind.

  Read the article

• Running a Screen instance of a program as non-root

  - by user288467

  I've got a dedicated server (Ubuntu 12.04, no GUI) set up to launch an instance of McMyAdmin and attach it to a screen instance every time I reboot the hardware. I have the command saved to root's crontab as: @reboot cd /var/MC_SVR && screen -dmS McMyAdmin ./MCMA2_Linux_x86_64 Problem being, though, I have a user set up specifically for FTP access to the server files so I don't always have to SSH into the machine. Since the server is being started as a root process, all the files it makes are, obviously, set with root as the owner. So I chown'd all the files and set them to ftpuser. Now I'm stuck with trying to get the process to start as ftpuser. I've tried doing the following but to no avail: cd /var/MC_SVR && su ftpuser - -c 'screen -dmS McMyAdmin ./MCMA2_Linux_x86_64' I try this in terminal and I get no errors or anything (in fact I never get anything unless it's a syntax error from su), but there's no screen instance to access and so I can assume the server never starts. So, what am I doing wrong? Or am I just not accessing the screen instance correctly since it's (supposed) to be launched by another user?

  Read the article

• Ubuntu 11.10 not starting in Graphical mode?

  - by iammilind

  I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

  Read the article

• Oracle OpenWorld 2012 Hands-on Lab: “Leading Your Everyday Application Integration Projects with Enterprise SOA”

  - by Lionel Dubreuil

  Sharpen your Oracle skill sets and master Oracle technology in Oracle OpenWorld Hands-on Labs.In self-paced, practical learning sessions covering everything from business applications to middleware, database, storage, and enterprise management solutions, you'll discover new ways to derive maximum benefits from your Oracle hardware and software solutionsOracle experts will be available in person to answer questions and guide you through each lab.Hands-on Labs fill up early, and seats are limited, so don’t be late.This  HOL10093 - Leading Your Everyday Application Integration Projects with Enterprise SOA is scheduled for: Date: Monday, Oct 1 Time: 10:45 AM - 11:45 AM Location: Marriott Marquis - Salon 5/6 In this Hands-on Lab, Experience firsthand how Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects.From asset management, discovery, and management in Oracle Enterprise Repository to integration of content in Oracle AIA Foundation Pack operating on the Oracle SOA Suite platform, discover how you can develop integrations to support business agility.Take advantage of Oracle-delivered integration assets and validate your services for compliance, within Oracle JDeveloper. You will get your hands on the tools and talk with Oracle experts in this hands-on lab.Objectives for this session are to: Use Oracle Enterprise Repository to manage application interfaces, composite applications, and business processes See how Oracle Enterprise Repository can benefit every service-based application integration project Learn how to govern services through the software lifecycle and validate your services for compliance

  Read the article

• Oracle OpenWorld 2012 Hands-on Lab: “Leading Your Everyday Application Integration Projects with Enterprise SOA”

  - by Lionel Dubreuil

  Sharpen your Oracle skill sets and master Oracle technology in Oracle OpenWorld Hands-on Labs.In self-paced, practical learning sessions covering everything from business applications to middleware, database, storage, and enterprise management solutions, you'll discover new ways to derive maximum benefits from your Oracle hardware and software solutionsOracle experts will be available in person to answer questions and guide you through each lab.Hands-on Labs fill up early, and seats are limited, so don’t be late.This  HOL10093 - Leading Your Everyday Application Integration Projects with Enterprise SOA is scheduled for: Date: Monday, Oct 1 Time: 10:45 AM - 11:45 AM Location: Marriott Marquis - Salon 5/6 In this Hands-on Lab, Experience firsthand how Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects.From asset management, discovery, and management in Oracle Enterprise Repository to integration of content in Oracle AIA Foundation Pack operating on the Oracle SOA Suite platform, discover how you can develop integrations to support business agility.Take advantage of Oracle-delivered integration assets and validate your services for compliance, within Oracle JDeveloper. You will get your hands on the tools and talk with Oracle experts in this hands-on lab.Objectives for this session are to: Use Oracle Enterprise Repository to manage application interfaces, composite applications, and business processes See how Oracle Enterprise Repository can benefit every service-based application integration project Learn how to govern services through the software lifecycle and validate your services for compliance

  Read the article

• What is a "Technical Programmer"? [closed]

  - by Mike E

  I've noticed in job posting boards a few postings, all from European companies in the games industry, for a "Technical Programmer". The job description in both was similar, having to do with tools development, 3d graphics programming, etc. It seems to be somewhere between a Technical Artist who's more technical than artist or who can code, and a Technical Director but perhaps without the seniority/experience. Information elsewhere on the position is sparse. The title seems redundant and I haven't seen any American companies post jobs by that name exactly. One example is this job posting on gamedev.net which isn't exactly thorough. In case the link dies: Subject: Technical Programmer Frictional Games, the creators of Amnesia: The Dark Descent and the Penumbra series, are looking for a talented programmer to join the company! You will be working for a small team with a big focus on finding new and innovating solutions. We want you who are not afraid to explore uncharted territory and constantly learn new things. Self-discipline and independence are also important traits as all work will be done from home. Some the things you will work with include: 3D math, rendering, shaders and everything else related. Console development (most likely Xbox 360). Hardware implementations (support for motion controls, etc). All coding is in C++, so great skills in that is imperative. As I mentioned, the job title has appeared from European companies so maybe it goes by another title in America. What other titles might this specialization of programmer go by?

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Platinum Services – The Highest Level of Service in the Industry

  - by cwarticki

  Oracle Platinum Services provides remote fault monitoring with faster response times and patch deployment services to qualified Oracle Premier Support customers – at no additional cost. We know that disruptions in IT systems availability can seriously impact business performance. That’s why we engineer our hardware and software to work together. Oracle engineered systems are pre-integrated to reduce the cost and complexity of IT infrastructures while increasing productivity and performance. And now, customers who choose the extreme performance of Oracle engineered systems have the power to access the added support they need – Oracle Platinum Services – to further optimize for high availability at no additional cost.  In addition to receiving the complete support essentials with Oracle Premier Support, qualifying Oracle Platinum Services customers also receive: •     24/7 Oracle remote fault monitoring •    Industry-leading response and restore times o   5-Minute Fault Notification o   15-Minute Restoration or Escalation to Development o   30-Minute Joint Debugging with Development •    Update and patch deployment Visit us online to learn more about how to get Oracle Platinum Services

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• IDC Recommends Oracle Solaris 11

  - by user12611852

  IDC published a research report this week on Oracle Solaris 11 and described it as "Delivering unique value."  The report emphasizes the ability of Oracle Solaris to scale up and provide a mission critical platform for a wide variety of computing. Solaris built-in server and network virtualization helps to lower costs and enable consolidation while reducing administration costs and risks. Learn more about Oracle Solaris and the recently announced 11.1 update. In their conclusion, IDC reports: Today, Oracle is a multi-OS vendor that is adjusting to the opportunities presented by a significantly expanded product portfolio. The company has a long history of supporting Unix operating systems with its broad product portfolio, but the main difference is that now Oracle has direct control over the destiny of the Solaris operating system. The company has made a strong commitment to Solaris on both SPARC and x86 systems, as well as to Linux on x86 systems, and expects to continue to enhance Oracle Solaris 11 with update releases once a year as well as Solaris 12, which is already on the road map. Oracle is working to help its customers understand its strong commitment to Oracle Solaris and the product's role as a single operating system that runs on both SPARC and x86 processors. While Oracle Solaris and Oracle Linux are critical assets, the company's crown jewel is the deep collection of software that runs on top of both Oracle Solaris and Oracle Linux, software that creates a robust application environment. The continuing integration and optimization of the software and hardware stack is a differentiator for Oracle and for customers that run an Oracle Solaris stack.

  Read the article

• Dedicated server: managed hosting or manage it myself?

  - by ddawber

  We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• Datenbank in a Box

  - by A&C Redaktion

  Die Oracle Database Appliance: ein zuverlässiges, einfach zu bedienendes und erschwingliches Datenbank-System. Endlich kommt ein Datenbanksystem auf den Markt, das auf die Bedürfnisse kleinerer Unternehmen zugeschnitten ist: Oracle Database Appliance (ODA). Nicht jeder, der große Datenmengen zu verwalten hat, kann schließlich gleich zu Exadata und Co. greifen. Die kompakte „Datenbank in a Box“ kombiniert Software, Server und Speicherkapazität und bietet diverse Vernetzungsmöglichkeiten. Sie beinhaltet zwei geclusterte SunFire-Server, die unter Oracle Linux laufen, vorinstalliert ist eine Oracle Database 11g Release 2. Einer der großen ODA-Vorteile: Die Datenbank wächst mit den Bedürfnissen des Unternehmens: Die Leistungsfähigkeit des Clusters lässt sich anpassen, indem per "Pay-as-you-grow" Software-Lizensierung sukzessive zwei bis 24 Cores freigeschaltet werden können. Sie bietet außerdem hohe Verfügbarkeit für Eigen- und Standard-OLTP sowie universelle Datenbanken, auch in großer Anzahl. Für den Schutz vor Server- und Speichersystemausfällen sorgen Oracle Real Application Clusters, beziehungsweise Oracle Automatic Storage Management. Proaktive Systemüberwachung, Software-Bereitstellung auf einen Klick, integrierte Patches über den gesamten Stack und ein automatischer Call-Home bei Hardware-Ausfällen sparen Kosten und Ressourcen bei der Instandhaltung. Über das Oracle PartnerNetzwerk steht Kunden eine große Anzahl an branchenübergreifenden und -spezifischen Anwendungen zur Verfügung, die von der besseren Verfügbarkeit der Oracle Database Appliance profitieren. Auch die Fachpresse setzt sich mit der neuen Oracle Database Appliance auseinander: Ausführlich berichten unter anderem die Computerwoche und heise online. Das Admin-Magazin bietet eine kurze aber treffende Übersicht. Eine ebenfalls anschauliche, etwas ausführlichere Darstellung bietet die Webseite von DOAG e.V. Im Webcast zur Oracle Database Appliance geht Judson Althoff unter anderem auf deren Bedeutung für das Partner-Business ein:

  Read the article

• Disaster Recovery Example

  Previously, I use to work for a small internet company that sells dental plans online. Our primary focus concerning disaster prevention and recovery is on our corporate website and private intranet site. We had a multiphase disaster recovery plan that includes data redundancy, load balancing, and off-site monitoring. Data redundancy is a key aspect of our disaster recovery plan. The first phase of this is to replicate our data to multiple database servers and schedule daily backups of the databases that are stored off site. The next phase is the file replication of data amongst our web servers that are also backed up daily by our collocation. In addition to the files located on the server, files are also stored locally on development machines, and again backed up using version control software. Load balancing is another key aspect of our disaster recovery plan. Load balancing offers many benefits for our system, better performance, load distribution and increased availability. With our servers behind a load balancer our system has the ability to accept multiple requests simultaneously because the load is split between multiple servers. Plus if one server is slow or experiencing a failure the traffic is diverted amongst the other servers connected to the load balancer allowing the server to get back online. The final key to our disaster recovery plan is off-site monitoring that notifies all IT staff of any outages or errors on the main website encountered by the monitor. Messages are sent by email, voicemail, and SMS. According to Disasterrecovery.org, disaster recovery planning is the way companies successfully manage crises with minimal cost and effort and maximum speed compared to others that are forced to make decision out of desperation when disasters occur. In addition Sun Guard stated in 2009 that the first step in disaster recovery planning is to analyze company risks and factor in fixed costs for things like hardware, software, staffing and utilities, as well as indirect costs, such as floor space, power protection, physical and information security, and management. Also availability requirements need to be determined per application and system as well as the strategies for recovery.

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• 1080p Screen resolution problem after 10.04 to 12.04 update

  - by Ale

  I have a Samsung LCD 40" with a NVidia GeForce 6150SE nForce 430 Card. I recently upgraded from 10.04 to 12.04 and the best resolution I can get is 1360x768. I've tried the propietary drivers available on the repository kmod:nvidia_current kmod:nvidia_173_updates kmod:nvidia_current_updates kmod:nvidia_96 kmod:nvidia_96_updates kmod:nvidia_173 I've also downloaded latest from NVidia's Web, version: 295.40. But still no luck. With Nouveau driver, I can only get 1024x768. I know there is no problem with my hardware (video card, cable and monitor), I was using it perfectly on 10.04. Can anybody suggest something else I could try, to get my 1920x1080 resolution back? Thanks in advance. Here are some more information, that I got reading other similar posts on askubuntu. $ lspci | grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1360 x 768, maximum 1360 x 768 default connected 1360x768 0 0 0mm x 0mm 1360x768 50.0 52.0* 1024x768 51.0 800x600 53.0 54.0 55.0 680x384 56.0 57.0 640x480 58.0 576x432 59.0 512x384 60.0 400x300 61.0 62.0 63.0 320x240 64.0

  Read the article

• Is SSD TRIM support still automatic in 12.10?

  - by dam

  Folks I had automatic TRIM working on my laptop running Ubuntu Precise. As in the TRIM guide I added discard to mount options in /etc/fstab, and hdparm --read-sector read 0s immediately after a rm && sync. Using the very same hardware, laptop and SSD, TRIM seems no longer to be automatic after upgrading to Quantal. I recognise the test in the guide I mentioned above may not necessarily work. SSD erase blocks and all that. But Quantal is at least different. After deleting the file and syncing, its data are still on disk and unerased even after waiting several minutes. fstrim will then 0 the dead file's blocks. Once. Repeat the same test five minutes later, and fstrim does nothing. I figure this is probably really a kernel issue, but that box is too black for my spelunking torch. I'm prepared to believe that kernel 3.5 knows what I want better than I do, and all is well despite appearances, but it looks for all the world like TRIM isn't quite all there any more. Anybody have the scoop on TRIM in Quantal/kernel 3.5?

  Read the article

• Software Manager who makes developers do Project Management

  - by hdman

  I'm a software developer working in an embedded systems company. We have a Project Manager, who takes care of the overall project schedule (including electrical, quality, software and manufacturing) hence his software schedule is very brief. We also have a Software Manager, who's my boss. He makes me write and maintain the software schedule, design documents (high and low level design), SRS, change management, verification plans and reports, release management, reviews, and ofcourse the software. We only have one Test Engineer for the whole software team (10 members), and at any given time, there are a couple of projects going on. I'm spending 80% of my time making these documents. My boss comes from a Process background, and believes what we need is better documentation to improve software: (1) He considers the design to be paramount, coding is "just writing the design down", it shouldn't take too long, and "all the code should be written before the hardware is ready". (2) Doesn't understand the difference between a Central & Distributed Version control, even after we told him its easier to collaborate with a distributed model. (3) Doesn't understand code, and wants to understand every bug and its proposed solution. (4) Believes verification should be done by developer, and validation by the Tester. Thing is though, our verification only checks if implementation is correct (we don't write unit tests, its never considered in the schedule), and validation is black box testing, so the units tests are missing. I'm really confused. (1) Am I responsible for maintaining all these documents? It makes me feel like I'm doing the Software Project Management, in essence. (2) I don't really like creating documents, I want to solve problems and write code. In my experience, creating design documents only helps to an extent, its never the solution to better or faster code. (3) I feel the boss doesn't really care about making better products, but only about being a good manager in the eyes of the management. What can I do?

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >