Search Results

Search found 9456 results on 379 pages for 'controller'.

Page 238/379 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• iSCSI RAID1 on two servers, fail scenario

  - by Franz Kafka

  Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

  Read the article

• Authorization error when testing FTP to UNC

  - by user64204

  We have a Windows Server 2008 R2 with Active Directory (hereafter called DC) running as a domain controller on which we have IIS and an FTP site installed. We have a second Server 2008 (hereafter called SHARE) which is joined to that domain and has a disk shared as a network share (\\share\Office). That network share is used as the ftp's physical path on DC. We've tested the FTP from the IIS FTP configuration panel, by clicking on Basic Settings... then Test Settings.... When setting Administrator as a username with the Connect as... option, everything is fine: When no user is provided we can the below error: Q1: Could someone explain in more understandable terms what is written in the Details text area?

  Read the article

• Create and use intermediate certificate authority on Windows Server 2012?

  - by Sid

  Background: Server OS is Windows Server 2012. GUI is installed as we come upto speed with powershell. Setup is staging, not production (yet). We have our (internal, domain limited) Root CA installed. I would like to take the Root CA offline to secure storage but before that I'd like to setup an intermediate CA which can take over actual live, online (int-RA-net) functionality Can someone guide me covering: creating the intermediate CA certificate request installing the intermediate CA certificate on domain controller (certification authority role already installed with Root CA online right now) use the intermediate CA to generate a certificate (any use certificate, just for demonstration purposes) Obviously this certification chain would be invalid on computers outside our domain (self trusted root - our root certificate is NOT from common 3rd parties). This last point is NOT a problem.

  Read the article

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• Wireless router not connection -> AP Not associated

  - by candido

  I can not connect to internet by wireless router after some months with ubuntu 10.04. I can connect with the same portable but with win OS. My SO is ubuntu 10.04 linux 2.6.32-41 arch SMP i686. The internet wireless network controller is Atheros AR9285 chipset (pci express) Kernel module ath9k I have tried a command line connection: $ sudo /etc/init.d/network-manager stop #stop gui network manager $ iwconfig wlan0 essid WLAN_3C key s:C001D20550B3C $ ifconfig Access Point: NOT-ASSOCIATED $dmesg ... AP 00:1a:2b:08:60:49 associated Is the SO has connected to router for booting long ( associated message), after boot and login why the connection to router is not possible by network-manager or command line (NOT associated message)? Thanks in advance

  Read the article

• IE does not send NTLM domain

  - by Buddy Casino

  Hi! I have a problem with NTLM single-sign-on with IE8. We've got multiple domain controllers and users from multiple domains that we try to authenticate to a web application via NTLMv1 passthru. Somehow IE fails to send the user's domain in the NTLM Type 1 message. This has the effect that the webapp can not match users properly to their domain controllers, resulting in failed logon attempts, because a user from domain X tries to authenticate to domain controller Y. This problem does not occur with Firefox, as it always sends the correct domain header. So: how do I get IE to send the domain in the NTLM header? Grateful for any help, Michael

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• Multiple test Active Directory envirovments hand in hand with production domain controllers

  - by MadBoy

  What's the best approach of having multiple test environments next to production one? We have multiple programming teams that build solutions that use Active Directory very often. We have tried different approaches, starting with their own domain controllers (in same subnet), or additional OU's in our production AD that the team gets control over and can create/delete accounts within that one OU. We thought of possible 4 solutions: Setting up separate OU's in ou production env. Creating subdomains for our contoso.com domain like test.contoso.com, something.contoso.com and delegating control to the teams (would we need additional DC's or the two that we have already would be enough to hold this? Setting up additional test domain controler that has a trust to our main domain and all teams can use the test domain controler as they please. Setting up single domain controller for every team/project. We're taking in consideration amount of resources needed, security (for example having multiple domain controlers with multiple passwords may lead users to use simpler passwords) and overall best practices for this scenario.

  Read the article

• Server 2012 R2 DNS Conditional forwarding not working reliably, possible caching issue?

  - by Matt

  I have a bit of a home lab setup with a domain controller that is acting as the DNS server for my network. For everything, it's working fine and forwards external DNS requests to my ISP. The household recently wanted to get Netflix going and it seemed a DNS option was better than a VPN to get around the region locking, so I signed up for unblock-us.com Since I have a Windows DNS server I thought I'd be clever and make use of conditional forwarders and added the Netflix domain to the list. Initially this worked well and all devices on the network could now access Netflix, however after about an hour going to the Netflix site would result in a page cannot be found. Doing an nslookup of Netflix.com from my PC resulted in it not returning any IP addresses. As a test, I deleted the Netflix domain from the DNS servers cache and things started working again - devices could get to the site again however the same thing happens again after around half an hour to an hour. Have I missed something here that's causing it to stop working?

  Read the article

• APIPA ip address in server 2003 dns for (same as parent folder record) can anyone suggest why this i

  - by dasko

  have a server 2003 domain controller i have installed active directory integrated dns under the forward lookup zone for domain_name.local i see an APIPA ip address that is set for (same as parent folder) with ip number 169.x.x.x looks like (same as parent folder) Host A 169.x.x.x (apipa subnet range) problem is, from other forums that i have read, that this is due to dual nics and one on that is not getting a dynamic or static ip address BUT... I only have one nic in this server? where could this be coming from and could it mess up other settings or not allowing the DC to be contacted? i am just wondering what symptoms could arise due to the record being there. any help would be greatly appreciated thanks.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Remote RAID Control in ESXi on a Dell PowerEdge 2950 Using OpenManage

  - by yoyomommy

  I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

  Read the article

• Meraki's Accounting-Requests to RADIUS server

  - by PachinSV

  I'm running a RADIUS server with some Meraki APs, the process of Authentications is fine... But it seems that the Meraki Cloud Controller is just sending the authentication packets and not the accounting requests. I've tested the RADIUS sending accounting requests with the radclient tool (locally) and it worked. I think that maybe my RADIUS server is ignoring the accounting requests from the MCC because there are some Vendor Specific Attributes that my RADIUS doesn't know. should I add a Meraki's dictionary to my RADIUS configurations? I'm kind of desperate, any idea?

  Read the article

• Solution for storing sata drives outside of case

  - by Jeffrey Kevin Pry

  I have a system that has 8 sata disks in a software raid 5 array using mdadm. My issue is that I want to move the drives from inside of the computer case in order to cool more efficiently. I have looked all over the web and only seem to find enclosures that hide the drives connectors behind an estata port or some other internal raid controller. Basically what I want is an enclosure or equivalent that I can run independent sata cables to and either power as well, or have it have its own power supply. I have the sata ports on the motherboard available and don't want to limit io by using one port with a multiplier or the like. One final caveat, I am a college student on a budget and don't have a fortune to spend on such an enclosure. Thanks in advance for your help and advice.

  Read the article

• stdout and key press

  - by Jack

  Hi, when in console, if I press a key, some interrupt controller sends code of that key to CPU, which looks into some table and than represent that keypress by printing some charracter to stdout. But, is keyboard sending an ASCII code of that key, or just some standardised code? Since there is so many languages and extra characters, OS must further translate its code into some character according to user selected scheme, I guess. I ask, becouse I am from Czech Republic, and we use some characters that do not exists in standart ASCII code. So I was thinking, if I enter this character into a console, and then print it, lets say in C++ using cin and cout, and I have set locale to Czech, stdin must actually send some non-ASCII code of the character I pressed to input stream. Am I right?

  Read the article

• b43 module loaded, but no interface showed up

  - by Eduardo Bezerra

  I'm using CentOS 6.3 x86_64 on a hardware with a BCM43224 chip for wi-fi. I installed the b43-fwcutter module and then run modprobe b43, with no error messages. However, no new network interface showed up, and the return of iwconfig is: lo no wireless extensions. eth0 no wireless extensions. lspci -nn | grep 43224 returns: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) and uname -a: Linux localhost.localdomain 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Any ideas of how to make the wireless device work?

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• Need advice to choose correct wi-fi drivers for Dell Vostro 3560

  - by overdriven

  I'm having problems with my Dell notebook's Wi-Fi, it can't see some of the available access points, despite they are close and I used to be connected to them yesterday. Other notebooks and my phone can see them. I believe it's a driver issue, since after installing system I haven't downloaded any network drivers. I went to Dell's website to search for them but I have no idea which should I choose. For my Dell Vostro 3560 and system Windows 8.1 64bit these are available: Intel Smart Connect Technology Application APP_iSCT_W8.1_A00_Setup-TJW84_ZPE.exe (23 MB) Vostro-3560_Network_Application_TJW84_WN_4.2.40.2418_A00.EXE (29 MB) Dell Wireless 1704 WLAN 802.11b/g/n (2.4GHz), Bluetooth v4.0+HS Driver DW1704_W8.1_A00_Setup-K1HGN_ZPE.exe (239 MB) Network_Driver_K1HGN_WN_6.30.223.143_A00.EXE (247 MB) Dell Wireless1703 802.11 b/g/n, BT4.0 + HS Driver Dell Wireless1901 802.11a/b/g/n (2.4GHz and 5GHz), Bluetooth v4.0+HS Driver DW1703_DW1901_Win8.1_A00_Setup-7FPWR_ZPE.exe (265 MB) Network_Driver_7FPWR_WN_10.0.0.263_A00.EXE (272 MB) Realtek RTL8105E/RTL8111E Ethernet Controller Driver LOM_Realtek_W8.1_A00_Setup-0XCVW_ZPE.exe (6 MB) Network_Driver_0XCVW_WN_8.018.0621.2013_A00.EXE (12 MB) Intel® Centrino® Wireless-N 2230 Bluetooth Driver BT_Intel_W8.14_A00_Setup-XR83W_ZPE.exe (31 MB) Network_Application_XR83W_WN_3.1.1307.0362_A00.EXE (37 MB)

  Read the article

• HP DL380 G5 Predictive Drive Failure on a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Machine account authentication on Radius server

  - by O.Shevchenko

  My workstation is under Linux. I have an Active Directory domain controller + Radius server on Windows 2008. I can verify user account 'radius-01' using 'radtest' tool: $ radtest -t pap radius-01 password123 195.234.133.32 1812 password123 Sending Access-Request of id 98 to 195.234.73.2 port 1812 User-Name = "radius-01" User-Password = "password123" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 rad_recv: Access-Accept packet from host 195.234.133.32 port 1812, id=98, length=84 Framed-MTU = 1344 Framed-Protocol = PPP Service-Type = Framed-User Class = 0x537004f00000013700010200ac1c0... I have joined my Linux PC to Active Directory domain ARB-HRK using Samba: [root@shev-arb]# net ads testjoin Join is OK I can dump machine password: [root@shev-arb]# tdbdump /var/lib/samba/private/secrets.tdb { key(34) = "SECRETS/MACHINE_PASSWORD/ARB-HRK" data(15) = "yGgXJsquRnpT0g\00" } How can i authenticate my machine account on Radius server? Do anybody know any tools for this, like: radtest shev-arb$ yGgXJsquRnpT0g 195.234.133.32 1812 password123 (this command fails)

  Read the article

• SQL 2008 network logon

  - by gledhilla

  Hi I have a domain controller that I have installed active directory onto and have set up an account that I want to use for my SQL server installation on another computer that is linked onto the domain. I can search for the account in active directory and I am able to select it into the add new user section in MSSMS, however, when I click add I get 'Windows NT user or group 'DOMAIN\user' not found. Check the name again. (Microsoft SQL Server, Error: 15401) I have googled the Error code and I havent found a solution that has fixed the error. If you have any help I would be greatful Thanks :)

  Read the article

• nvidia twinview in ubuntu with large resolutions not working

  - by knittl

  i bought an external monitor and can't get it to work properly with my laptop screen. my laptop screen has a resolution of 1920x1200 and the new monitor has 1920x1080 when i open nvidia-settings and select the maximum resolution for each of the screen, one screen will always stay blank. if i select a smaller resolution for one of the two it will work. 1920x1200 + 1440x900 = works 1680x1050 + 1920x1080 = works 1920x1200 + 1920x1080 = doesn't work (but that's what i want to have!) my graphics card is an 01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 360M (rev a1) (output from lspci), driver is proprietary nvidia driver, operating system is ubuntu. any help greatly apreciated

  Read the article

• Why my AD domain doesn't work on my laptop

  - by Frederick Marcoux

  I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

  Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >