Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 239/356 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• OS X Snow Leopard fails to boot after upgrade to 10.6.1

  - by pixeline

  I'm a fairly recent mac user. Been using windows for decades and happily switched. But i upgraded from 10.6 to 10.6.1 last night and the upgrade looks like it failed. I restarted the machine when it asked to then went to bed. In the morning the computer was still trying to shut itself off. So i forced the shutdown, restarted, but now i'm stuck with the loading spinner. What can i do? UPDATE: Verbose didn't show anything interesting. i also did the hardware test. Nothing comes up wrong. Disk utility did not find any error on the HD. But, it did show a fatal error when checking permissions.

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• Use an unsigned driver in Windows 7 x64

  - by rjmunro

  I'm trying to use the RBC9 SpaceNavigator TEST x64 build drivers for my SpaceNavigator 3d joystick so that it can work as a normal joystick in games like Quake. Unfortunately, I get the error "This version of windows requires all drivers to have a valid digital signature" and in the "Device status" in device manager, I get "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)". Is there a way to work around this issue?

  Read the article

• Calculating Cloud Service Costs [closed]

  - by capdragon

  Possible Duplicate: Can you help me with my capacity planning? I would like to scale a web application to the Cloud and wanted to know if anyone had any experience calculating costs and could tell me how I would go about that. I have NO experience with cloud services at all. Currently my production environment consists of two web servers and one database server. If the application continues on a linear growth path, eventually, I want to scale to the cloud to avoid any more long term commitments to extra hardware. I want to be able to create a similar environment I have now as a baseline. Have this as my fixed cost that I will always have. I also want to calculate my variable costs that will increase with more users or bandwidth. I don't have a preferred cloud vendor. Amazon, Rackspace, Terremark or any other is fine as long as understand how to calculate my fixed and variable costs.

  Read the article

• Why does StackExchange store images in imgur rather than its own servers? [migrated]

  - by martin's

  I am trying to understand the technical (and business) logic behind taking such an approach. Certainly SE isn't short of server or bandwidth resources. I don't think imgur is a CDN, so that can't be the reason. On the one hand one is giving up local control (meaning your files, your hardware) of the content. On the other, you don't have to use your own bandwidth, storage and resources. Then again, you depend on someone else for the reliability and up-time of your service.

  Read the article

• Running complete Native Linux on phones that are bootloader-unlocked [on hold]

  - by james

  Since there are many phones (HTC, Samsung, LG, Nexus) today that have bootloader unlocked, I want to ask what's preventing them from running a complete native GNU/Linux. GNU/Linux has ARM port and we can run a command line GNU/Linux on top of Android by the method of chroot. So, what's preventing for existing bootloader unlocked Android phones from running a complete GNU/Linux natively? The device should get a long shelf life if it has one such port. My few thoughts.. Proprietary drivers for hardware that cannot be made to work when using a different OS. And the binary provider will never support any OS other than what the phone is shipped with. Application Interface. The interface for desktop apps doesn't fit to the mobile display with different PPI. Kernel. Since android devices use Linux kernel whose sources should be available, could the device kernel be modified to work with GNU/Linux. And any other reasons?

  Read the article

• Windows 8.1 fresh install with Windows 8 licence

  - by typ1232

  I purchased Windows 8 online from Microsoft a while ago. Today Windows 8.1 was released as a free update to Windows 8 users over the Windows Store. I was planning to do a fresh install of Windows 8.1 to have a clean system again and UEFI support because I got new hardware since the Windows 8 installation. So my questions are: Where do I get the ISO installation medium for Windows 8.1 64-bit? I tried this microsoft site where I initially got my Windows 8 ISO from, but when entering my Windows 8 key in the Windows 8.1 installer, it says the key is wrong. Even if I get the ISO, will my old key work? I'm concerned because it didn't work in their installer (see previous point) Do they seriously want me to reinstall Windows 8 and after that upgrade to Windows 8.1 through their Store?!

  Read the article

• Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

  - by Liam

  I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

  Read the article

• Lazy umount or Unmounting a busy disk in Linux

  - by deed02392

  I have read that it is possible to 'umount' a disk that is otherwise busy by using the 'lazy' option. The manpage has this to say about it: umount - unmount file systems -l Lazy unmount. Detach the filesystem from the filesystem hierarchy now, and cleanup all references to the filesystem as soon as it is not busy anymore. This option allows a "busy" filesystem to be unmounted. (Requires kernel 2.4.11 or later.) But what would be the point in that? I considered why we dismount partitions at all: To remove the hardware To perform operations on the filesystem that would be unsafe to do while mounted In either of these cases, all a 'lazy' unmount serves IMHO is to make it more difficult to determine if the disk really is dismounted and you can actually proceed with these actions. The only application for umount -l seems to be for inexperienced users to 'feel' like they've achieved something they haven't. Why would you use a lazy unmount?

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Is it possible to download minimal drivers on Windows, without the extra software packages?

  - by Anton Gogolev

  The situation in all its glory: 30 megs for ATIs' "Display Driver Only". Almost 100 megs for NVidias' GeForce/Ion bloatware. 300 megs for an HP printer driver with immense amount of crap 30 megs for a Realtek integrated sound card driver. 50 megs for a mouse driver ...and dozens and dozens of other similar examples Additinally, UI/UX on vendors' sites is really terrible: I have to carefully pick and choose the exact model of my whatever, although this packages do contain drivers for pretty much every possible hardware model out there. My question is: How and where can I download true minimal drivers without all these ATI "Installation Managers", Realtek GUIs, ASUS tools, etc.?

  Read the article

• Is Hyper-V Server 2008 working on Intel's Atom platform

  - by Josip Medved

  Did anybody try to install Hyper-V on Intel Atom platform? Hyper-V requires: x64 compatible processor with Intel VT or AMD-V technology enabled Hardware Data Execution Prevention (DEP) It seems that both requirements are satisfied with Atom as processor. However, I wonder whether there is some blocking issue (e.g. BIOS that does not support it) since all Atom motherboards I checked had quite old north/south-bridge. My intentions are to run two low-requirements virtual machines (embedded Linux), so performance should not be an issue.

  Read the article

• Mapping of memory addresses to physical modules in Windows XP

  - by Josef Grahn

  I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

  Read the article

• Transferring Windows XP Mode VM to Another Machine?

  - by Omar Kooheji

  I've been running Windows XP mode on my Windows 7 Laptop for a while now and I've got my VM set up just how I like it. I am switchign laptops due to an intermittent hardware failure. Is it possible to transfer my Windows XP mode VM to my new laptop? I know it's just a Windows Virtual PC VM, how would I go about transferring it if this is possible? Will the Fact that I'm moving from Windows 7 Ultimate to Windows 7 Pro make a difference? AFAIK they both support Windows XP Mode.

  Read the article

• Freebsd or Linux? as BGP router over 100mbps

  - by Yucong Sun

  I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

  Read the article

• Laptop and 2 screens: use screens but not monitor display

  - by ClarkeyBoy

  Hi, I have 1 VGA socket on my laptop, and currently have that in use by a large screen. At some point in the future I would like to get another one of these screens and use both screens in dual screen mode but not use my laptop display (to be honest my laptop display is pretty rubbish as its like 2/3s the size of my screen - even if I had the choice to use all 3 I probably wouldn't want to). Is it possible to achieve this? If so, what do I need by way of hardware / software, and how much do you reckon it should cost me? Thanks in advance. Regards, Richard

  Read the article

• Linux/bsd tcp load balancing with 10 gigabit ethernet

  - by user37899

  Okay, I've been looking at layer 4 load balancing solutions for 10 gigabit links. I need the following properties Works at 10Gig ethernet speeds. Can support long live tcp connections. up to 1mil live tcp connections. Balancer not involved in the return path. Fault tolerant with tcp session fail over. low latency and good through put. can be scripted. Either a software or hardware solution. Can it be done? Anyone doing this?

  Read the article

• Cloud Computing - Multiple Physical Computers, One Logical Computer

  - by Koobz

  I know that you can set up multiple virtual machines per physical computer. I'm wondering if it's possible to make multiple physical computers behave as one logical unit? Fundamentally the way I imagine it working is that you can throw 10 computers into a facility one day. You've got one client that requires the equivalent of two computers worth, and 100 others that eat up the remaining 8. As demands change you're just reallocating logical resources, maybe the 2 computer client now requires a third physical system. You just add it to the cloud, and don't worry about sharding the database, or migrating data over to a new server. Can it work this way? If yes, why would anyone ever do things like partition their database servers anymore? Just add more computing resources. You scale horizontally with the hardware, but your server appears to scale vertically. There's no need to modify your application's infrastructure to support multiple databases etc.

  Read the article

• Cloud Computing - Multiple Physical Computers, One Logical Computer

  - by bundini

  I know that you can set up multiple virtual machines per physical computer. I'm wondering if it's possible to make multiple physical computers behave as one logical unit? Fundamentally the way I imagine it working is that you can throw 10 computers into a facility one day. You've got one client that requires the equivalent of two computers worth, and 100 others that eat up the remaining 8. As demands change you're just reallocating logical resources, maybe the 2 computer client now requires a third physical system. You just add it to the cloud, and don't worry about sharding the database, or migrating data over to a new server. Can it work this way? If yes, why would anyone ever do things like hand partition their database servers anymore? Just add more computing resources. You scale horizontally with the hardware, but your server appears to scale vertically. There's no need to modify your application's supporting infrastructure to support multiple databases etc.

  Read the article

• Virtual box lost files

  - by Paul Lloyd

  I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

  Read the article

• Advantages of Terminal Server instead of normal client-Server installation?

  - by Sam

  What are the advantages of using a (Windows) Terminal Server and thin clients instead of using a normal Server and full clients? So far I've only really used normal servers and clients, but now customers ask about terminal Server, and I'd like to know pro's and con's of using them instead of an "old-fashioned" client-server network. Some things I can guess: easier administration (don't need to install/update office/stuff on 20 computers but only on the server). Easier backup (no need to backup client computers). And I'd guess it would be hard (impossible) to connect and use local (like USB) hardware with Terminal Server? What else are the reasons for or against switching to Terminal Server?

  Read the article

• No audio input deviced are installed

  - by Meowbits

  If I go to Sound Recording Devices and it says "No audio devices are installed" If I click to set up a microphone I get an error "Wizard could not launch, No audio input device found, make sure your audio hardware is working properly and check your audio configuration in the Audio Devices and Sound Themes control panel. Where can I get an audio input device? I just want something so I can actually use the microphone on my headset. This is ridiculous. I have tried to look for any file but I simply cannot find a way to add an audio input device... I really do not want to format my computer just for this problem but I am starting to feel like that is the only option I have. I have the latest chipsets

  Read the article

• Intel Xeon vt-d query

  - by deploymonkey

  Does Xeon westmere ep (xeon 56xx series) have vt-d (=iommy / direct io) or does intel TXT (Intel® Trusted Execution Technology) include vt-d? I'm at a loss. I've been researching current processors for an important project for some time now. I need to know, if the xeon 5600s (Westmere EP) include vt-d (iommu/directed io/pci passing) because the system will run virtualized guests. This enables direct hardware access eg. pci passthrough, in xen for example. It seems that the 5600s TXT should incorporate vt-d and that xeon 5600s should include vt-d as they are ramped up 5500s, but there is no conclusive answer anywhere. Intel's processor comparison only states that 5500s have vt-d and no TXT and 5600s have no vt-d but TXT. I'd be really grateful if anybody could clear this up and possibly even provide a citation. Thanks a lot.

  Read the article

• Virtualized CPU cores vs. threads

  - by nedm

  We've got a KVM host system on Ubuntu 9.10 with a newer Quad-core Xeon CPU with hyperthreading. As detailed on Intel's product page, the processor has 4 cores but 8 threads. /proc/cpuinfo and htop both list 8 processors, though each one states 4 cores in cpuinfo. KVM/QEMU also reports 8 VCPUs available to assign to guests. My question is when I'm allocating VCPUs to VM guests, should I allocate per-core or per-thread? Since KVM/QEMU reports the server has 8 VCPUs to allocate, should I go ahead and set a guest to use 4 CPUs where I previously would have set it to use 2 (assuming 4 total VCPUs available)? I'd like to get the most possible out of the host hardware without over-allocating.

  Read the article

• Installing Windows 7 on a BSOD Windows Vista (ASAP)

  - by anonymous

  On a previous question i posted, i asked for help on fixing my windows vista box because it keeps going to blue screen. No one seems to have the answer, so now i want to install Windows 7. I want to know if i can install 7 without having to reformat my hard drive and having to lose all my files. I've already confirmed the hardware is working because i installed Ubuntu 9.10 on my external hard drive and it runs on my system fine. I tested the memory using vista's memory test and Ubuntu's memory test. here's the previous post: http://superuser.com/questions/125897/i-really-need-help-resolving-a-window-vista-bsod-blue-screen-crash-on-my-deskto

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >