memory layout - Page 239

SQL SERVER – 2014 Announced and SQL Server 2014 Datasheet

- by Pinal Dave

Earlier this week Microsoft has announced SQL Server 2014. The release date of Trial of SQL Server to be believed later this year. Here are few of the improvements which I was looking forward are there in this release. Please note this is not the exhaustive list of the features of SQL Server 2014. This is the a quick note on the features which I was looking forward and now will be available in this release. Always On supports now 8 secondaries instead of 4 Online Indexing at partition level – this is a good thing as now index rebuilding can be done at a partition level Statistics at the partition level – this will be a huge improvement in performance In-Memory OLTP works by providing in-application memory storage for the most often used tables in SQL Server. (Read More Here) Columnstore Index can be updated – I just can’t wait for this feature (Columnstore Index) Resource Governor can control IO along with CPU and Memory Increase performance by extending SQL Server in-memory buffer pool to SSDs Backup to Azure Storage You can additionally download SQL Server 2014 Datasheet from here. Which is your favorite new feature of SQL Server 2014? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Missing Wireless access point

- by nvcnvn

I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

Read the article

Sort algorithms that work on large amount of data

- by Giorgio

I am looking for sorting algorithms that can work on a large amount of data, i.e. that can work even when the whole data set cannot be held in main memory at once. The only candidate that I have found up to now is merge sort: you can implement the algorithm in such a way that it scans your data set at each merge without holding all the data in main memory at once. The variation of merge sort I have in mind is described in this article in section Use with tape drives. I think this is a good solution (with complexity O(n x log(n)) but I am curious to know if there are other (possibly faster) sorting algorithms that can work on large data sets that do not fit in main memory. EDIT Here are some more details, as required by the answers: The data needs to be sorted periodically, e.g. once in a month. I do not need to insert a few records and have the data sorted incrementally. My example text file is about 1 GB UTF-8 text, but I wanted to solve the problem in general, even if the file were, say, 20 GB. It is not in a database and, due to other constraints, it cannot be. The data is dumped by others as a text file, I have my own code to read this text file. The format of the data is a text file: new line characters are record separators. One possible improvement I had in mind was to split the file into files that are small enough to be sorted in memory, and finally merge all these files using the algorithm I have described above.

Read the article

wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

- by s1lv3r

I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

Read the article

Dell inspiron not finding Vodafone router

- by Jeggy

I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

Read the article

Extension GLX missing...on a desktop PC

- by Bart van Heukelom

I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

Read the article

wireless blocked after installing ubuntu 12.04

- by Cornelia Frank

I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

Read the article

Can't get wireless working after installing ubuntu 12.10 on acer aspire 5560-7414

- by markdel

I have been struggling all day trying different solutions from different posts on how to get my wifi working but none have worked. Any help would be greatly appreciated. Below are some wireless preferences to help find the problem. mark@mark-Aspire-5560:~$ sudo rfkill list all [sudo] password for mark: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:6a:8a:7f:63:82 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=158.65.194.244 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s resources: irq:16 memory:f0000000-f000ffff memory:f0010000-f001ffff memory:f0050000-f00507ff *-network description: Wireless interface product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 00 serial: 08:ed:b9:01:e0:8b width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.112 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f0103fff

Read the article

Dealing with Fine-Grained Cache Entries in Coherence

- by jpurdy

On occasion we have seen significant memory overhead when using very small cache entries. Consider the case where there is a small key (say a synthetic key stored in a long) and a small value (perhaps a number or short string). With most backing maps, each cache entry will require an instance of Map.Entry, and in the case of a LocalCache backing map (used for expiry and eviction), there is additional metadata stored (such as last access time). Given the size of this data (usually a few dozen bytes) and the granularity of Java memory allocation (often a minimum of 32 bytes per object, depending on the specific JVM implementation), it is easily possible to end up with the case where the cache entry appears to be a couple dozen bytes but ends up occupying several hundred bytes of actual heap, resulting in anywhere from a 5x to 10x increase in stated memory requirements. In most cases, this increase applies to only a few small NamedCaches, and is inconsequential -- but in some cases it might apply to one or more very large NamedCaches, in which case it may dominate memory sizing calculations. Ultimately, the requirement is to avoid the per-entry overhead, which can be done either at the application level by grouping multiple logical entries into single cache entries, or at the backing map level, again by combining multiple entries into a smaller number of larger heap objects. At the application level, it may be possible to combine objects based on parent-child or sibling relationships (basically the same requirements that would apply to using partition affinity). If there is no natural relationship, it may still be possible to combine objects, effectively using a Coherence NamedCache as a "map of maps". This forces the application to first find a collection of objects (by performing a partial hash) and then to look within that collection for the desired object. This is most naturally implemented as a collection of entry processors to avoid pulling unnecessary data back to the client (and also to encapsulate that logic within a service layer). At the backing map level, the NIO storage option keeps keys on heap, and so has limited benefit for this situation. The Elastic Data features of Coherence naturally combine entries into larger heap objects, with the caveat that only data -- and not indexes -- can be stored in Elastic Data.

Read the article

Errors in ~/.xsession-errors

- by Kuberan Naganathan

I'm getting errors in ~/.xession-errors. I'm running ubuntu 12.04 Many apps fail to run without mention of problems in the .xsession-errors file. I looked around and tried to resolve issues myself but failed so far. I have to say it's possible that the issue is related to me mounting /home on another partition. (I say possibly because stuff worked ok for a while.) Fortunately my .xsession-errors file is small enough to post here. Thanks in advance for the help: gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done (gnome-settings-daemon:2547): color-plugin-WARNING **: failed to get edid: unable to get EDID for output (gnome-settings-daemon:2547): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output (gnome-settings-daemon:2547): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero Initializing composite options...done Initializing opengl options...done Initializing decor options...done ** Message: applet now removed from the notification area Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/kuberan/.compiz/session/10754cf696d335e98e13471376531156900000024960034" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done ** Message: using fallback from indicator to GtkStatusIcon (compiz:2560): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed Initializing unityshell options...done Setting Update "main_menu_key" Setting Update "run_key" Setting Update "icon_size" ** Message: moving back from GtkStatusIcon to indicator

Read the article

How do I connect to a wireless network?

- by Keith Groben

I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

Read the article

Oracle Solaris 11.1 available today

- by user12611852

Today Oracle is pleased to announce availability of Oracle Solaris 11.1. Download Solaris 11.1 Order Solaris 11.1 media kitExisting customers can quickly and simply update using the network based repository Highlights include: 8x faster database startup and shutdown and online resizing of the database SGA with a new optimized shared memory interface between the database and Oracle Solaris 11.1 Up to 20% throughput increases for Oracle Real Application Clusters by offloading lock management into the Oracle Solaris kernel Expanded support for Software Defined Networks (SDN) with Edge Virtual Bridging enhancements to maximize network resource utilization and manage bandwidth in cloud environments 4x faster Solaris Zone updates with parallel operations shorten maintenance windows New built-in memory predictor monitors application memory use and provides optimized memory page sizes and resource location to speed overall application performance. Learn more and share these valuable tools with your customers to enable them to move to Oracle Solaris 11.1 quickly. Many customers wait for the first update --now is the time to encourage them to install Oracle Solaris 11.1. Oracle Solaris 11.1 Data Sheet What's New in Oracle Solaris 11.1 Oracle Solaris 11.1 FAQs Oracle Solaris 11 .1 Customer Presentation Oracle Solaris 11.1 is recommended for all SPARC T4 Systems and will soon be available preinstalled.

Read the article

I have problem on 12.10 64bit with nvidia graphics driver opensource and proprietary ! Can't change resolution on 3d games

- by digitalcrow

I have problem with nvidia graphics driver opensource and proprietary ! Can't change resolution on 3d games and there's a bug there are no kernel sources installed and thus jockey can't install proprietary drivers. I can't change resolution while on games fullscreen. I tried to install proprietary driver and i couldn't plus i couldn't login to ubuntu it showed only the desktop photo no dash no nothing. -tried to install kernel sources and blacklist+remove Nouveau drivers and then installed the proprietary drivers i hope succesfully. -The problem is the same i can't change resolution on 3d games while on fullscreen. I've installed the sources and be able to install the proprietary nvidia drivers but the problem remains, look what i got in the output of a 3d game exited while i tried to change resolution: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 150 (XFree86-VidModeExtension) Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) Value in failed request: 0x25b Serial number of failed request: 497 Current serial number in output stream: 499 I'm giving you more details about my system: i have an nvidia geforce gts 250 , 3,4 ghz quadcore amd phenom2 , 8gbytes of ram. The output of: sudo lshw -C display; lsb_release -a; uname -a Is the following: *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ef00(size=128) memory:fb000000-fb01ffff No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux darkpc 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I like ubuntu's style and user interface but i hate the bad quality of work they do.

Read the article

What problem does double or triple buffering solve in modern games?

- by krokvskrok

I want to check if my understanding of the causes for using double (or triple) buffering is correct: A monitor with 60Hz refresh's the monitor-display 60 times per second. If the monitor refresh the monitor-display, he updates pixel for pixel and line for line. The monitor requests the color values for the pixels from the video memory. If I run now a game, then this game is constantly manipulating this video memory. If this game don't use a buffer strategy (double buffering etc.) then the following problem can happen: The monitor is now refreshing his monitor-display. At this moment the monitor had refreshed the first half monitor-display already. At the same time, the game had manipulated the video memory with new data. Now the monitor accesses for the second half monitor-display this new manipulated data from the video memory. The problems can be tearing or flickering. Is my understanding of cases of using buffer strategy correct? Are there other reasons?

Read the article

lshw not showing network

- by triunenature

Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

Read the article

Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

- by Coen

After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

Read the article

Why is heap size fixed on JVMs?

- by themel

Can anyone explain to me why JVMs (I didn't check too many, but I've never seen one that didn't do it that way) need to run on a fixed heap size? I know it's easier to implement on a simple contiguous heap, but the Sun JVM is now over a decade old, so I'd expect them to have had time to improve this. Needing to define the maximum memory size of your program at startup time seems such a 1960s thing to do, and then there are the bad interactions with OS virtual memory management (GC retrieving swapped out data, inability to determine how much memory the Java process is really using from the OS side, huge amounts of VM space wasted (I know, you don't care on your fancy 48bit machines...)). I also guess that the various sad attempts to build small operating systems inside the JVM (EE application servers, OSGi) are at least partially to blame on this circumstance, because running multiple Java processes on a system invariably leads to wasted resources because you have to give each of them the memory it might have to use at peak. Surprisingly, Google didn't yield the storms of outrage over this that I would expect, but they may just have been buried under the millions of people finding out about fixed heap size and just accepting it for a fact.

Read the article

No WIFI on Ubuntu 12.04 LTS after today software update

- by Adchara

I just got new dell inspiron3537 with Ubuntu 12.04 LTS (no windows O/S). It got some wireless (hard block) yesterday. So, this morning, I ran the software update all the security update. After that I can't see "Wireless" in system setting. So, I updated all the software update and looked thru several web site and found "sudo lshw -c network" command. I tried and found the result below. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: 74:86:7a:40:5d:48 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.10 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:60 ioport:4000(size=256) memory:c0700000-c0700fff memory:c0400000-c0403fff *-network UNCLAIMED description: Network controller product: QCA9565 / AR9565 Wireless Network Adapter vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:c0600000-c067ffff memory:9fb00000-9fb0ffff Please suggest what I should do to fix it. Thx in advance

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Android - creating a custom preferences activity screen

- by Bill Osuch

Android applications can maintain their own internal preferences (and allow them to be modified by users) with very little coding. In fact, you don't even need to write an code to explicitly save these preferences, it's all handled automatically! Create a new Android project, with an intial activity title Main. Create two more activities: ShowPrefs, which extends Activity Set Prefs, which extends PreferenceActivity Add these two to your AndroidManifest.xml file: <activity android:name=".SetPrefs"></activity> <activity android:name=".ShowPrefs"></activity> Now we'll work on fleshing out each activity. First, open up the main.xml layout file and add a couple of buttons to it: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <Button android:text="Edit Preferences" android:id="@+id/prefButton" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center_horizontal"/> <Button android:text="Show Preferences" android:id="@+id/showButton" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center_horizontal"/> </LinearLayout> Next, create a couple button listeners in Main.java to handle the clicks and start the other activities: Button editPrefs = (Button) findViewById(R.id.prefButton); editPrefs.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { Intent myIntent = new Intent(view.getContext(), SetPrefs.class); startActivityForResult(myIntent, 0); } }); Button showPrefs = (Button) findViewById(R.id.showButton); showPrefs.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { Intent myIntent = new Intent(view.getContext(), ShowPrefs.class); startActivityForResult(myIntent, 0); } }); Now, we'll create the actual preferences layout. You'll need to create a file called preferences.xml inside res/xml, and you'll likely have to create the xml directory as well. Add the following xml: <?xml version="1.0" encoding="utf-8"?> <PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android"> </PreferenceScreen> First we'll add a category, which is just a way to group similar preferences... sort of a horizontal bar. Add this inside the PreferenceScreen tags: <PreferenceCategory android:title="First Category"> </PreferenceCategory> Now add a Checkbox and an Edittext box (inside the PreferenceCategory tags): <CheckBoxPreference android:key="checkboxPref" android:title="Checkbox Preference" android:summary="This preference can be true or false" android:defaultValue="false"/> <EditTextPreference android:key="editTextPref" android:title="EditText Preference" android:summary="This allows you to enter a string" android:defaultValue="Nothing"/> The key is how you will refer to the preference in code, the title is the large text that will be displayed, and the summary is the smaller text (this will make sense when you see it). Let's say we've got a second group of preferences that apply to a different part of the app. Add a new category just below the first one: <PreferenceCategory android:title="Second Category"> </PreferenceCategory> In there we'll a list with radio buttons, so add: <ListPreference android:key="listPref" android:title="List Preference" android:summary="This preference lets you select an item in a array" android:entries="@array/listArray" android:entryValues="@array/listValues" /> When complete, your full xml file should look like this: <?xml version="1.0" encoding="utf-8"?> <PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android"> <PreferenceCategory android:title="First Category"> <CheckBoxPreference android:key="checkboxPref" android:title="Checkbox Preference" android:summary="This preference can be true or false" android:defaultValue="false"/> <EditTextPreference android:key="editTextPref" android:title="EditText Preference" android:summary="This allows you to enter a string" android:defaultValue="Nothing"/> </PreferenceCategory> <PreferenceCategory android:title="Second Category"> <ListPreference android:key="listPref" android:title="List Preference" android:summary="This preference lets you select an item in a array" android:entries="@array/listArray" android:entryValues="@array/listValues" /> </PreferenceCategory> </PreferenceScreen> However, when you try to save it, you'll get an error because you're missing your array definition. To fix this, add a file called arrays.xml in res/values, and paste in the following: <?xml version="1.0" encoding="utf-8"?> <resources> <string-array name="listArray"> <item>Value 1</item> <item>Value 2</item> <item>Value 3</item> </string-array> <string-array name="listValues"> <item>1</item> <item>2</item> <item>3</item> </string-array> </resources> Finally (for the preferences screen at least...) add the code that will display the preferences layout to the SetPrefs.java file: @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); addPreferencesFromResource(R.xml.preferences); } OK, so now we've got an activity that will set preferences, and save them without the need to write custom save code. Let's throw together an activity to work with the saved preferences. Create a new layout called showpreferences.xml and give it three Textviews: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/textview1" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="textview1"/> <TextView android:id="@+id/textview2" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="textview2"/> <TextView android:id="@+id/textview3" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="textview3"/> </LinearLayout> Open up the ShowPrefs.java file and have it use that layout: setContentView(R.layout.showpreferences); Then add the following code to load the DefaultSharedPreferences and display them: SharedPreferences prefs = PreferenceManager.getDefaultSharedPreferences(this); TextView text1 = (TextView)findViewById(R.id.textview1); TextView text2 = (TextView)findViewById(R.id.textview2); TextView text3 = (TextView)findViewById(R.id.textview3); text1.setText(new Boolean(prefs.getBoolean("checkboxPref", false)).toString()); text2.setText(prefs.getString("editTextPref", "<unset>"));; text3.setText(prefs.getString("listPref", "<unset>")); Fire up the application in the emulator and click the Edit Preferences button. Set various things, click the back button, then the Edit Preferences button again. Notice that your choices have been saved. Now click the Show Preferences button, and you should see the results of what you set: There are two more preference types that I did not include here: RingtonePreference - shows a radioGroup that lists your ringtones PreferenceScreen - allows you to embed a second preference screen inside the first - it opens up a new set of preferences when clicked

Read the article

TinyFluidGrid – a clean and lightweight css framework

- by Guy Harwood

I've been using the 960 Grid system for a while on some of my personal projects and if like me you are no css ninja its convenient for sidestepping the usual nightmare of a good cross browser layout, and allows you to move on to the nitty gritty code and functionality. I just stumbled across a new layout generator that looks rather snazzy and has the functionality to back it up. TinyFluidGrid generates exactly that – a tiny fluid grid! Worth a look.

Read the article

Metro: Grouping Items in a ListView Control

- by Stephen.Walther

The purpose of this blog entry is to explain how you can group list items when displaying the items in a WinJS ListView control. In particular, you learn how to group a list of products by product category. Displaying a grouped list of items in a ListView control requires completing the following steps: Create a Grouped data source from a List data source Create a Grouped Header Template Declare the ListView control so it groups the list items Creating the Grouped Data Source Normally, you bind a ListView control to a WinJS.Binding.List object. If you want to render list items in groups, then you need to bind the ListView to a grouped data source instead. The following code – contained in a file named products.js — illustrates how you can create a standard WinJS.Binding.List object from a JavaScript array and then return a grouped data source from the WinJS.Binding.List object by calling its createGrouped() method: (function () { "use strict"; // Create List data source var products = new WinJS.Binding.List([ { name: "Milk", price: 2.44, category: "Beverages" }, { name: "Oranges", price: 1.99, category: "Fruit" }, { name: "Wine", price: 8.55, category: "Beverages" }, { name: "Apples", price: 2.44, category: "Fruit" }, { name: "Steak", price: 1.99, category: "Other" }, { name: "Eggs", price: 2.44, category: "Other" }, { name: "Mushrooms", price: 1.99, category: "Other" }, { name: "Yogurt", price: 2.44, category: "Other" }, { name: "Soup", price: 1.99, category: "Other" }, { name: "Cereal", price: 2.44, category: "Other" }, { name: "Pepsi", price: 1.99, category: "Beverages" } ]); // Create grouped data source var groupedProducts = products.createGrouped( function (dataItem) { return dataItem.category; }, function (dataItem) { return { title: dataItem.category }; }, function (group1, group2) { return group1.charCodeAt(0) - group2.charCodeAt(0); } ); // Expose the grouped data source WinJS.Namespace.define("ListViewDemos", { products: groupedProducts }); })(); Notice that the createGrouped() method requires three functions as arguments: groupKey – This function associates each list item with a group. The function accepts a data item and returns a key which represents a group. In the code above, we return the value of the category property for each product. groupData – This function returns the data item displayed by the group header template. For example, in the code above, the function returns a title for the group which is displayed in the group header template. groupSorter – This function determines the order in which the groups are displayed. The code above displays the groups in alphabetical order: Beverages, Fruit, Other. Creating the Group Header Template Whenever you create a ListView control, you need to create an item template which you use to control how each list item is rendered. When grouping items in a ListView control, you also need to create a group header template. The group header template is used to render the header for each group of list items. Here’s the markup for both the item template and the group header template: <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> You should declare the two templates in the same file as you declare the ListView control – for example, the default.html file. Declaring the ListView Control The final step is to declare the ListView control. Here’s the required markup: <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> In the markup above, six properties of the ListView control are set when the control is declared. First the itemDataSource and itemTemplate are specified. Nothing new here. Next, the group data source and group header template are specified. Notice that the group data source is represented by the ListViewDemos.products.groups.dataSource property of the grouped data source. Finally, notice that the layout of the ListView is changed to Grid Layout. You are required to use Grid Layout (instead of the default List Layout) when displaying grouped items in a ListView. Here’s the entire contents of the default.html page: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>ListViewDemos</title>  <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script>  <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script src="/js/products.js" type="text/javascript"></script> <style type="text/css"> .product { width: 200px; height: 100px; border: white solid 1px; font-size: x-large; } </style> </head> <body> <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> </body> </html> Notice that the default.html page includes a reference to the products.js file: <script src=”/js/products.js” type=”text/javascript”></script> The default.html page also contains the declarations of the item template, group header template, and ListView control. Summary The goal of this blog entry was to explain how you can group items in a ListView control. You learned how to create a grouped data source, a group header template, and declare a ListView so that it groups its list items.

Read the article

Metro: Grouping Items in a ListView Control

- by Stephen.Walther

The purpose of this blog entry is to explain how you can group list items when displaying the items in a WinJS ListView control. In particular, you learn how to group a list of products by product category. Displaying a grouped list of items in a ListView control requires completing the following steps: Create a Grouped data source from a List data source Create a Grouped Header Template Declare the ListView control so it groups the list items Creating the Grouped Data Source Normally, you bind a ListView control to a WinJS.Binding.List object. If you want to render list items in groups, then you need to bind the ListView to a grouped data source instead. The following code – contained in a file named products.js — illustrates how you can create a standard WinJS.Binding.List object from a JavaScript array and then return a grouped data source from the WinJS.Binding.List object by calling its createGrouped() method: (function () { "use strict"; // Create List data source var products = new WinJS.Binding.List([ { name: "Milk", price: 2.44, category: "Beverages" }, { name: "Oranges", price: 1.99, category: "Fruit" }, { name: "Wine", price: 8.55, category: "Beverages" }, { name: "Apples", price: 2.44, category: "Fruit" }, { name: "Steak", price: 1.99, category: "Other" }, { name: "Eggs", price: 2.44, category: "Other" }, { name: "Mushrooms", price: 1.99, category: "Other" }, { name: "Yogurt", price: 2.44, category: "Other" }, { name: "Soup", price: 1.99, category: "Other" }, { name: "Cereal", price: 2.44, category: "Other" }, { name: "Pepsi", price: 1.99, category: "Beverages" } ]); // Create grouped data source var groupedProducts = products.createGrouped( function (dataItem) { return dataItem.category; }, function (dataItem) { return { title: dataItem.category }; }, function (group1, group2) { return group1.charCodeAt(0) - group2.charCodeAt(0); } ); // Expose the grouped data source WinJS.Namespace.define("ListViewDemos", { products: groupedProducts }); })(); Notice that the createGrouped() method requires three functions as arguments: groupKey – This function associates each list item with a group. The function accepts a data item and returns a key which represents a group. In the code above, we return the value of the category property for each product. groupData – This function returns the data item displayed by the group header template. For example, in the code above, the function returns a title for the group which is displayed in the group header template. groupSorter – This function determines the order in which the groups are displayed. The code above displays the groups in alphabetical order: Beverages, Fruit, Other. Creating the Group Header Template Whenever you create a ListView control, you need to create an item template which you use to control how each list item is rendered. When grouping items in a ListView control, you also need to create a group header template. The group header template is used to render the header for each group of list items. Here’s the markup for both the item template and the group header template: <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> You should declare the two templates in the same file as you declare the ListView control – for example, the default.html file. Declaring the ListView Control The final step is to declare the ListView control. Here’s the required markup: <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> In the markup above, six properties of the ListView control are set when the control is declared. First the itemDataSource and itemTemplate are specified. Nothing new here. Next, the group data source and group header template are specified. Notice that the group data source is represented by the ListViewDemos.products.groups.dataSource property of the grouped data source. Finally, notice that the layout of the ListView is changed to Grid Layout. You are required to use Grid Layout (instead of the default List Layout) when displaying grouped items in a ListView. Here’s the entire contents of the default.html page: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>ListViewDemos</title>  <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script>  <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script src="/js/products.js" type="text/javascript"></script> <style type="text/css"> .product { width: 200px; height: 100px; border: white solid 1px; font-size: x-large; } </style> </head> <body> <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> </body> </html> Notice that the default.html page includes a reference to the products.js file: <script src=”/js/products.js” type=”text/javascript”></script> The default.html page also contains the declarations of the item template, group header template, and ListView control. Summary The goal of this blog entry was to explain how you can group items in a ListView control. You learned how to create a grouped data source, a group header template, and declare a ListView so that it groups its list items.

Read the article

Silverlight Cream for April 08, 2010 -- #834

- by Dave Campbell

In this Issue: Michael Washington, Phil Middlemiss, Yochay Kiriaty, Giorgetti Alessandro, Mike Snow, John Papa, SilverLaw, smartyP, and Pete Brown. Shoutouts: Steve Wortham sent me a link to his RegEx tool that is written in Silverlight... definitely worth a look: Introducing Code Hinting for Regular Expressions Joshua Blake posted his MIX10 materials: MIX10 NUI session sample code From SilverlightCream.com: Silverlight MVVM: An (Overly) Simplified Explanation Michael Washington has a tutorial up for getting your arms (and head) around MVVM and Silverlight, and Blend too. A Chrome and Glass Theme - Part 3 Phil Middlemiss has part 3 up of his tutorial series on building an awesome theme for Silverlight... he's styling the textbox and checkbox this time around, and improving the button too Automatic Rotation Support or Automatic Multi-Orientation Layout Support for Windows Phone Yochay Kiriaty is giving up some WP7 goodness with his post on Multi-Orientation Layout Support ... yeah I had to say it twice myself :) good links and all the code in addition to the good blog post Silverlight Navigation Framework: resolve the pages using an IoC container Giorgetti Alessandro has some pretty cool code up as a proof of concept of using an IoC container with the Navigation Framework of Silverlight 4. Silverlight Tip of the Day No. 109 – Attach to Process Debugging Mike Snow is back doing Tips of the Day... and number 109 is showing how to attach the debugger to a running Silverlight app. Silverlight TV 20: Community Driven Development with WCF RIA Services In his latest Silverlight TV episode, John Papa talks with Jeff Handley about RIA Services, and how feedback from the community helped shape the product. ChildWindowMouseScrollResizeBehavior - Silverlight 3 SilverLaw has a new Behavior up at the Expression Gallery that gives you resizing on a ChildWindow using the Mouse Wheel. Creating a Windows Phone 7 Metro Style Pivot Application [Part 3] smartyP has the 3rd and final episode for his WP7 Pivot up, and this one includes not only the source but a video tutorial. Layout Rounding Pete Brown talks about Layout Rounding and it has nothing to do with rounding corners... it has to do with rounding off where your objects get placed pixel-wise ... I've blogged about this seemingly-anti-aliasing more than once... Pete has the real answer Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Android - Create a custom multi-line ListView bound to an ArrayList

- by Bill Osuch

The Android HelloListView tutorial shows how to bind a ListView to an array of string objects, but you'll probably outgrow that pretty quickly. This post will show you how to bind the ListView to an ArrayList of custom objects, as well as create a multi-line ListView. Let's say you have some sort of search functionality that returns a list of people, along with addresses and phone numbers. We're going to display that data in three formatted lines for each result, and make it clickable. First, create your new Android project, and create two layout files. Main.xml will probably already be created by default, so paste this in: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:layout_height="wrap_content" android:text="Custom ListView Contents" android:gravity="center_vertical|center_horizontal" android:layout_width="fill_parent" /> <ListView android:id="@+id/ListView01" android:layout_height="wrap_content" android:layout_width="fill_parent"/> </LinearLayout> Next, create a layout file called custom_row_view.xml. This layout will be the template for each individual row in the ListView. You can use pretty much any type of layout - Relative, Table, etc., but for this we'll just use Linear: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/name" android:textSize="14sp" android:textStyle="bold" android:textColor="#FFFF00" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:id="@+id/cityState" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:id="@+id/phone" android:layout_width="wrap_content" android:layout_height="wrap_content"/> </LinearLayout> Now, add an object called SearchResults. Paste this code in: public class SearchResults { private String name = ""; private String cityState = ""; private String phone = ""; public void setName(String name) { this.name = name; } public String getName() { return name; } public void setCityState(String cityState) { this.cityState = cityState; } public String getCityState() { return cityState; } public void setPhone(String phone) { this.phone = phone; } public String getPhone() { return phone; } } This is the class that we'll be filling with our data, and loading into an ArrayList. Next, you'll need a custom adapter. This one just extends the BaseAdapter, but you could extend the ArrayAdapter if you prefer. public class MyCustomBaseAdapter extends BaseAdapter { private static ArrayList<SearchResults> searchArrayList; private LayoutInflater mInflater; public MyCustomBaseAdapter(Context context, ArrayList<SearchResults> results) { searchArrayList = results; mInflater = LayoutInflater.from(context); } public int getCount() { return searchArrayList.size(); } public Object getItem(int position) { return searchArrayList.get(position); } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { ViewHolder holder; if (convertView == null) { convertView = mInflater.inflate(R.layout.custom_row_view, null); holder = new ViewHolder(); holder.txtName = (TextView) convertView.findViewById(R.id.name); holder.txtCityState = (TextView) convertView.findViewById(R.id.cityState); holder.txtPhone = (TextView) convertView.findViewById(R.id.phone); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } holder.txtName.setText(searchArrayList.get(position).getName()); holder.txtCityState.setText(searchArrayList.get(position).getCityState()); holder.txtPhone.setText(searchArrayList.get(position).getPhone()); return convertView; } static class ViewHolder { TextView txtName; TextView txtCityState; TextView txtPhone; } } (This is basically the same as the List14.java API demo) Finally, we'll wire it all up in the main class file: public class CustomListView extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayList<SearchResults> searchResults = GetSearchResults(); final ListView lv1 = (ListView) findViewById(R.id.ListView01); lv1.setAdapter(new MyCustomBaseAdapter(this, searchResults)); lv1.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> a, View v, int position, long id) { Object o = lv1.getItemAtPosition(position); SearchResults fullObject = (SearchResults)o; Toast.makeText(ListViewBlogPost.this, "You have chosen: " + " " + fullObject.getName(), Toast.LENGTH_LONG).show(); } }); } private ArrayList<SearchResults> GetSearchResults(){ ArrayList<SearchResults> results = new ArrayList<SearchResults>(); SearchResults sr1 = new SearchResults(); sr1.setName("John Smith"); sr1.setCityState("Dallas, TX"); sr1.setPhone("214-555-1234"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Jane Doe"); sr1.setCityState("Atlanta, GA"); sr1.setPhone("469-555-2587"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Steve Young"); sr1.setCityState("Miami, FL"); sr1.setPhone("305-555-7895"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Fred Jones"); sr1.setCityState("Las Vegas, NV"); sr1.setPhone("612-555-8214"); results.add(sr1); return results; } } Notice that we first get an ArrayList of SearchResults objects (normally this would be from an external data source...), pass it to the custom adapter, then set up a click listener. The listener gets the item that was clicked, converts it back to a SearchResults object, and does whatever it needs to do. Fire it up in the emulator, and you should wind up with something like this:

Search Results

Search found 18112 results on 725 pages for 'memory layout'.

Page 239/725 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246 | Next Page >

- by Pinal Dave

- by nvcnvn

- by Giorgio

- by s1lv3r

- by Jeggy

- by Bart van Heukelom

- by Cornelia Frank

- by markdel

- by jpurdy

- by Kuberan Naganathan

- by Keith Groben

- by user12611852

- by digitalcrow

- by krokvskrok

- by triunenature

- by Coen

- by themel

- by Adchara

- by Jeff Taylor-Oracle

- by Bill Osuch

- by Guy Harwood

- by Stephen.Walther

- by Stephen.Walther

- by Dave Campbell

- by Bill Osuch

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246 | Next Page >