Search Results

Search found 29432 results on 1178 pages for 'mite fine dailes'.

Page 239/1178 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• I/O errors are reported when I try to install Ubuntu, but the SMART data is good. Is my hard disk dying?

  - by James

  When I try to install linux, it tells me there is an input output error on dev sda. I have tried both Ubuntu and Mint on two different computers. So that narrows it down to the hdd. After hours of googling and trying different things I tried making the hardrive ext4 with gparted but that comes up with an error. This makes me think that the hdd is bad. There are a few reasons I think the hdd isn't bad. I can use the hdd in windows fully. Windows and gparted disk health checks both say it is fine. Its SMART data is all good. So... help?

  Read the article

• Wifi USB interface being detected after some time

  - by Dani

  I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

  Read the article

• Mint 13 no longer using NVidia card after restart

  - by GenericUsrnme

  Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

  Read the article

• Can not enter password for sudo [duplicate]

  - by Michael

  This question already has an answer here: add repository to ubuntu from terminal with pgp key 3 answers I have used Ubuntu for several years, and I can not enter password for sudo, and this is when i wanna add a key to public.gpg for itunes10 it dos not work, and the password normal works wite sudo but not in the terminal when i enter: sudo wget -q "http:// deb.playonlinux.com/public.gpg" -o- | sudo apt-get add - and it says this 'sorry try again', and i just had installed itunes10, and have to add a key whit wget to public.gpg, and i tried to enter in the terminal: sudo apt-get update and the password works fine but not whit using sudo wget, and can some one please help.

  Read the article

• To mount NAS on a Laptop?

  - by deckoff

  So, I bought a NAS, which I configured successfully in /etc/fstab, on mu Kubuntu 10.10 Thinkpad x40. It works just fine when I am at home. A few days I went out with my laptop and the problem is, that when not at home, both suspend and hibernate functions seem forever to work. I commented out the entry on fstab and the laptop started to work as expected. I played with autofs, but it seems just dies at one moment and I cannot access anything. It works for some time, and then just goes off. Is there any consistent way, to make my laptop access the drive when at home and work OK when away? Probably a script that runs at startup, checks if the mount is there and mounts it if available... or a script that umount the drive at suspend|hibernate and loads it back at startup. Any useful ideas?

  Read the article

• Cursor seems to freeze in the first attempt to type - Unity 3D, 12.04

  - by Denis

  It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 4 to 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Is that what I should expect, or can be fixed or improved? Thanks.

  Read the article

• HDMI Audio stops after TV turned off

  - by Ryan

  After the 12.04 Update my HDMI audio stops working anytime I turn off my 2nd monitor(plasma TV). Graphics card is a Radeon 6800 which has DVI out to 1st monitor, HDMI out to receiver which the TV gets it's Audio/Video. Audio is always via my receiver sound. Things work fine as long as it boots with the TV and Receiver on. Turn off the TV and BART's HDMI audio will go away, and the HDMI option vanishes from the sound menu. I had an occasional HDMI issue with 11.10 but turning on/off the TV would fix the sound. How can I hardcode things so that it always uses HDMI out of audio? I suspect the TV is sending a signal upon that 12.04 is now listening for. Turning the TV back on does NOT resolve this, and I'd suggest having the ability to override this new "feature" via sound menu.

  Read the article

• Dynamic navigation mesh changes

  - by Nairou

  I'm currently trying to convert from grids to navigation meshes for pathfinding, since grids are either too coarse for accurate navigation, or too fine to be useful for object tracking. While my map is fairly static, and the navigation mesh could be created in advance, this is somewhat of a tower defense game, where objects can be placed to block paths, so I need a way to recalculate portions of the navigation mesh to allow pathing around them. Is there any existing documentation on good ways to do this? I'm still very new to navigation meshes, so the prospect of modifying them to cut or fill holes sounds daunting.

  Read the article

• Network connection on an Acer Aspire 5253?

  - by fuquam

  Brand new to Ubuntu and PCs for that matter. I've been a Mac user all my life but wanted to try Ubuntu on the cheap so I bought an Acer laptop 5253-BZ893. I got Ubuntu 10.10 installed with no problem. The only problem I have is I have no network connection options, wired or wireless. I just get "No Network Devices Available". The computer came with Windows 7 installed and I'm able to connect to my wireless network fine using Windows so I know the computer works. I've been searching forums and google for hours trying to figure out why I can't get a network connection using Ubuntu but so far no luck. Any suggestions? Thanks in advance.

  Read the article

• Rendering problems with Java LWJGL

  - by pangaea

  I'm new to rendering and so I don't know if I can speed up the code or that what I'm doing is bad. This is what it looks like But, if I have say 100-200 triangles everything is fine. Yet, when I get to 400 triangles it becomes very laggy. At 1,000 triangles it becomes 5fps at max. Also, when I try to close it everything becomes extremely laggy and the game breaks my computer. Is this normal? The code is here http://pastebin.com/9N6qdEbd game http://pastebin.com/fdkSrPGT mobs I haven't even adding collision detection.

  Read the article

• Copying an SSH Public Key to a Server

  - by Nathan Arthur

  I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing?

  Read the article

• not able to boot through pendrive and run set up

  - by Ash

  I have dell inspiron, previously i have install ubuntu 11.10 on my win7 and make it dual boot. but since i want to upgrade my ubuntu version and change the partion spacing, i have delete 11.10 partion directly and extend my hardrive space(windows + ubuntu) at that moment everything is fine. then i have put 12.04 version pendrive in usb boot from usb and install the 12.04 32 bit . it was installed but can't showing dual boot option like 11.10 and my machine directly boot into win7 . so instantly i again delete my 12.04 partion . Now i am able to login into win7 but whenever i put pendrive(12.04) into usb drive i am facing error of "grub rescue" even though i try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " i have reinstall win7 and reformat all partion still i am facing same error :( i need help badly.

  Read the article

• Uploading or attaching files that located on a shared drive doesn't work?

  - by Alex

  I have this odd, quite minor, but annoying issue that I am quite perplexed about. Whenever I try to upload a file via my browser(let's say attach a file to an email in GMail), I click 'Browse' button and it opens standard file selection dialog, that doesn't show network drives. Further more if I try to drag a file from a network drive into GMail, it doesn't work either, it just doesn't let me do that. This issue has been around for quite sometime now, and I am just curious if this is something on my side or if it's a bug or a misconfiguration of some sort. FWIW, I am currently running 10.10, network drive is a samba share on NAS. This happens in FF and Chrome and this is only happens with Samba mounts. As a matter of fact, NFS volumes that are located on the same network operate perfectly fine.

  Read the article

• No sound on fresh install of 13.10

  - by Totalnon

  I installed a new copy of 13.10 today and cannot get my audio to work. Speakers test good on other devices, enabled in the BIOS, worked this morning in a Windows environment. I ran all of the available updates through apt-get. aplay -l lists my card (which tells me Ubuntu recognizes the hardware, I have been looking around the web and trying various things to no avail. Pulse folder permissions seem fine, I've reinstalled ALSA, and the card shows both digital and analog in the system settings sound section. I have tried this guide: Sound Troubleshooting Guide As well as looked through these forums under the tags sound and 13.10 Anyone have any ideas that may help me?

  Read the article

• Ubuntu 13.04/13.10 - low graphics mode/black screen after login

  - by Richard Stokes

  Since last week, my Ubuntu 13.04 installation started booting up in low graphics mode out of nowhere. I tried a number of solutions found on this site but to no avail. The other night, I decided to upgrade to 13.10 to see if the issue would be fixed in the process. Since then, the system starts fine, but when I login to my account, I'm just presented with a black screen. I switched to the terminal and did any necessary updates, but to no avail. I don't even know where to start debugging this issue, so I'd appreciate if someone could point me towards the first place to start looking?

  Read the article

• No sound in 12.04 on VirtualBox

  - by john crisp

  No sound when installed in VirtualBox. When I boot from the live CD in Windows, sound works fine on my speakers. When in boot the live CD in VirtualBox it does not see my speakers. In sound properties only digital output built in S/PDIF and headphones! I've done the pavcontrol - alsamixer - all settings are OK. I've tried both 32/64 versions of Ubuntu. Running current version VirtualBox. System: Windows 7 64 - i5. What am I overlooking?

  Read the article

• delete /var/cache/* How can I fix it?

  - by user110474

  I accidentally remove all files in /var/cache/ directory with sudo rm -rf command. Now I can not see the files in Trash to bring them back. I would like to know how bad is the situation if these files are removed? does ubuntu going to work normally and recreate the directories in cache again automatically? If not, which directories do I have to create in /var/cache/ manually to let everything work fine? I have already manually made apt and apache2 and debconf in cache directoy but I do not know if I miss more importand directory which needed to be created there. I hope somebody can guide me to fix this issue.

  Read the article

• php application deployment to redhat [closed]

  - by Subhash Dike

  I am a .net background person with most of the work with Windows environment and IIS etc. I have been given a task to deploy one php application on RedHat Linux box. All I have is the credentials and the server IP of that box. Can someone help about how to get started creating a new website on Apache 2.0 on redhat box and then putting php code over to that. I do not have physical access to that server as well. I know it's very basis question, but I am in dark for these things. Even if you can point me to some documentation that's fine or else at least the analogy with IIS should also help to certain extent.

  Read the article

• Installing Ubuntu Server 11.04

  - by Jackson Walters

  Trying to install Ubuntu Server 11.04 on an 64-bit AMD machine. The install goes fine until after "Loading additional components", then I get a blank purple screen with a responsive cursor at the bottom. I've looked everywhere and can't find anything (all the documentation seems to be on the desktop version). I have a wireless card installed if that makes a difference, don't why it would. This happens regardless of whether nomodeset is set. Here's what it looks like (as described): Specs: CPU - 64-bit AMD Sempron 140 @ 2.7Ghz RAM - 1Gb DDR3 1333 HDD - WD 500Gb 7200RPM SATA 3.0Gb/s Mobo - Foxconn M61PMP-K Wireless Card - Rosewill RNX-G300LX

  Read the article

• Mail reaches only after closing connection

  - by user293250

  I have setup a postfix mail server with saslauthd. I telnet from a windows machine to send a mail. All works fine, I even get the msg 250 Mail queued for delivery. On the mailserver I see connect msgs on /var/log/mail.log for connection but not for the mail queuing or delivery. Only after I close the telnet connection I get all the valid msgs in mail.log. The mail also doesnt arrive in my Maildir/new directory until I close the connection. I am very new to Ubuntu, any pointers will be much appreciated. Many thanks.

  Read the article

• dhcpd fails to start

  - by TECHPREACHER

  I recently installed Ubuntu 11.10 I then used apt-get to grab isc-dhcp3. I removed Network-Manager and manually configured my network interface eth0. In addition, I hand edited a dhcpd.conf file and designated eth0 as the listen port in /etc/default/isc-dhcp-server. However, each time I attempt to start dhcpd it fails. When I view the syslog file, the last line is as follows: "Not configured to listen on any interfaces!" My eth0 interface works fine. I can ping addresses inside and outside the network and perform DNS queries. Any help would be greatly appreciated. AJ

  Read the article

• My system can't be updated

  - by Lucio

  After I installed some updates I restarted my computer. Some days later I wanted to check for updates because the update-manager shows me the following: "The packet information has been updated last 24 days ago." and a window appeared. That window after downloading packages, said that: Failed to download the information from the repository Check your Internet connection Details: W:Failed to fetch gzip:/var/lib/apt/lists/partial/ar.archive.ubuntu.com_ubuntu_dists_oneiric_unive??rse_i18n_Translation-en Encountered a section with no Package: header , E:Some index files failed to download. They have been ignored, or old ones used instead. But my Internet connection works fine. I downloaded and installed and run the banish404 software and it does not work. Also I tried with an terminal with 'sudo apt-get update'. What do I have to do?

  Read the article

• How can I read the sourcecode of a PDF

  - by Fendrix

  I want get the sourcecode of a PDF File. Unfortunately once I open the PDF with a texteditor some lines doesn't make sense... just like.... %PDF-1.6 %âãÏÓ 3 0 obj <</Ff 0/F 6/Type/Annot/Subtype/Widget/DR<</Font<</Helv 2 0 R>>>>/T(Ä\n¬4^XÈ4ýæçO§W²W^D³^Ywzº<92>õÌ^AÀÄi]â<96><8c>)/V(Ä\n¬4^XÈ4ýæçO§W²W^Dø<93>r^D¥à<82>ú<83>Z^Q7^Cv^FÈ)/AP<</N 1 0 R>>/P 4 0 R/BS<</W 1/S/S>>/FT/Tx/Rect[40 50 70 80]/DA(Ä\n¬4^XÈ4ýæçO§W²W^Dù~êw3<84>&^X´âL|q@³^VC<8a>"Ýo^N¿=Ì<91>ta^R`àz)>> endobj 6 0 obj so %PDF-1.6 is fine but after it s not resolving the correct letters.... I tried with vim ... is there any chance to get the correct content ....

  Read the article

• Fixing IP Renewal After Laptop Suspend

  - by Cerin

  I have a laptop running Ubuntu 10.04, and I've noticed that with some wifi networks, but not all, I'm unable to reconnect after coming out of suspension. I've tried both Network Manager and Wicd management daemons, and both get through validation, but get hung up on "Acquiring IP address...". The only solution I've found is to reboot the machine, after which it acquires an IP address very quickly. What's the underlying issue here? What would be a more efficient way to resolve the problem? EDIT: I've noticed that if I open Wicd and manually press "Connect", it fails to acquire an IP. However, if I do nothing and let it automatically try and connect, it acquires an IP and connects just fine...

  Read the article

• Fonts in menu are larger than they should be under Awesome WM

  - by janjust

  I upgraded to oneiric ocelot, running awesome wm. Everything works, more or less, fine but one thing I've noticed is that now my menu fonts and my menu symbols are larger than I'd like them to be. I used to set them in font settings, but now (for one I don't even know where font settings are anymore, I tried gnome-tweak-tool) the font-settings are gone? Surely I'm missing something. My prime example is the program evince whose symbols are ginormous. Any hints how to tweak it?

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >