Search Results

Search found 27244 results on 1090 pages for 'old computer'.

Page 239/1090 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• How do I update my servers' domain name for Reverse DNS?

  - by Jeff

  I'm updating my mail servers' rDNS and I think I have it all figured out except for one thing. When I installed my OS (Debian Etch), the installer asked me to enter the "domain name". Is the "domain name" updated by using the hostname command? If so, which config file(s) are updated when using the hostname command? If not, how do I change my servers' domain name? My current /etc/hosts: 127.0.0.1 localhost 67.228.178.164 mrspock.example-old.com mrspock My current /etc/hostname: mrspock $ hostname -f mrspock.example-old.com I need to update hostname -f to be mrspock.example-new.com.

  Read the article

• Trouble in Team Viewer VPN Connection

  - by Sumit Pal

  I have completed initial vpn connection setup. It has connected. I have tested with ping and it is ok. My problem is, when I want to start file transfer in VPN it asks for username & password. So what is the user name? I have tried giving Computer-Name/User-Name. I have found my Computer Name by going to Control Panel/System/ & clicking 'Computer Name' tab & username from user accounts or it is shown when I login in windows account (Please correct me if the above procedure is wrong). But what is the password? I have tried giving the account password but it always give 'The username or password is incorrect.' My Question: How to find the username & password? For Information: a) I have Team Viewer 7 installed in one Windows XP PC & one Windows 8 PC. I like to create a secure connection between these two PCs. b) The two PCs are connected in the same local network via a router. Please ask if you need additional information.

  Read the article

• How can I get my Sapphire Radeon 7850 to output in "1080p"?

  - by Fr33dan

  I have a Radeon 7850 connected to a Vizio 3D compatible TV. The TV has a function to parse and display SBS encoded content. On my old graphics card (a Radeon 5770) I just had to select the 1080p option in the catalyst control center. In this mode my TV reported the output mode as "1080p", with the new card the TV reports "1920x1080". I cannot figure out what the difference in between the 2 signals but the "1920x1080" cannot be switched into 3D mode by the TV. Weirdly, before windows starts the (in the Bios and so forth) the computer outputs in "1080p" so I know the card is capable of it. As soon as the blue login screen comes up though it changes back to the "1920x1080". I've tried everthing I can think of. Updated my drivers from 13.3b3 to 13.4, then even tried the 13.5 beta (Which I'm still on this moment). Tried all the "optimized" HD settings in catalyst, even the 720p modes show the resolution from the TV and not the "720p" (which it used to do on the old card when I had to lower the resolution of games)

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• Backing up Windows 2003 Server that has Certificate Authority

  - by Dina

  I want to export and migrate a Certificate Authority CA role from a Windows 2003 machine to a new copy of Windows 2008 R2 virtual machine. I was told that I cannot have 2 CA roles on the same network at the same time. Therefore, I must first export the certificates on the older machine, delete the CA role, then add the CA role on the new machine and import the certificates into it. As a safety precaution, I am tasked to find a backup solution in case this does not work and I need to revert back to the old Windows 2003 CA. My question is: What is the best software for doing this type of backup? I am currently trying out Symantec Backup Exec 2012. Which I hope will allow me to create a backup prior to removing CA role on Windows 2003. If this CA migration fails, the backup will allow me to revert the old machine to a time before I removed its CA role.

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• Active Server Pages error 'ASP 0126' classic asp pls help

  - by sagarmatha

  Hi friends, our company have a a old classic asp application, we have no choice but to host it. I just moved it to another server. It was perfectly running fine in old server but in this new server it's continuously giving this error. I am running windows 2003 server with IIS 6. Why I am geting this error ? please help. Active Server Pages error 'ASP 0126' Include file not found /application/unprocessed_application.asp, line 56 The include file '../../_fplclass/pdblib.inc' was not found.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

• Podcast aggregation - please recommend for Windows 7

  - by bazza-formez

  Hi, I need a good podcast aggregator. I was using Juice 2.2, but that will not work on my new pc which is running Windows 7 (64 bit). Could anyone recommend one please ? I need the following functionality : 1- Subscribe to podcasts (mp3's from radio shows) using rss 2- Have OPML support so I can load up my old subscriptions easily 3- That runs quietly in the backgrond and looks after itself 4- That deletes old episodes automatically after a set time 5- Isn't just designed for an IPOD (I use a simple generic mp3 player to listen). Any ideas? Thanks! Bazza

  Read the article

• SATA controller installed but not working? (No drives show up/Don't see card's BIOS)

  - by johnnycakes

  Hi, I have an old Promise FastTrak S150 TX4 SATA controller card. I put it in an old machine running Windows Server 2003. I booted the machine. The new hardware was detected. I installed the drivers. So now in Device Manager under "SCSI and RAID Controllers" I see "Win Server 2003 Promise FastTrak S150 TX4 Controller" and "Win Server 2003 Promise RAID Console SCSI Processor Device" I previously had the card in a machine that is now dead. When I booted that machine, during the boot process I would see the card info displayed and the drives that were attached. Boot would finish and my drives would be available. When I boot this new machine I never see that screen/text. No hard drives are available/visible. What am I missing? Thanks.

  Read the article

• File locked / read-only

  - by oshirowanen

  On a networked computer, I have a file which is coming up as read-only because someone else has it open. This is not true. This is a file stored locally on the computer and it is not being used by anyone else. I can login to the same computer using a different user, and the file opens up fine. I just get the issue with a particular user account. Other than deleting theses account/profile and creating it again, how can I unlock this file? Double clicking on this file gives me a message saying The file is locked for editing by another user, or the file (or the folder in which it is located,) is marked as read-only, or you specified that you wanted to open this file read-only. I don't think the folder is locked, because I can use other files in that folder fine, it's just 1 particular file which is causing this issue. I know that only 1 user is using this file as the file is on his c: and the same file works fine if he logs off to allow another user to log in.

  Read the article

• md5sum of large files gives different results sometimes

  - by Emanuele

  I have an AMD quad core, 8 gb RAM, 1 SSD EXT2 (2 months old), 2 HDD EXT4, approximately 1 year old. I'm using Ubuntu 10.04 x86-64 and when I compute the md5sum of large files (9 GB) sometimes I get different values than the one stored on a reference file. Upon restarting and switching off the PC then I get the expected results no matter how many times I repeat it. But this is random. I've turn on ECC (the fastest possible settings) and the issue seems to be rarer, but I've run memtest86+ for 6+ hours without a glitch (and with ECC off!). Any idea? Should I update the BIOS of my motherboard (Asus EVO-something...don't remember it now)? I've tried all the rest apart this, but genuinely don't know what to do anymore... Any suggestion is appreciated!

  Read the article

• How I can recover files when the folder shows empty but the files are not deleted?

  - by Borror0

  Yesterday, my laptop caught a virus which caused massive damage. Since them, I have been trying to recover important files before reformatting my computer, a task the virus has not made easy. Restoration points predating the attack have been deleted. Most of my folders show empty. My Start menu is essentially empty, with the exception of Trillian and Mirror's Edge. The same goes for my Desktop, which only has programs which were installed after the attack. Searching for files though my computer is pretty much useless, as it only rarely brings up anything. I suspect most of my files have not been deleted. While my folders show empty, uTorrent still does display them and I can open them from here. Unfortunately, when I select Open Containing Folder, the folder still shows as completely empty even if I'm currently watching a video from that very folder. Further adding evidence to the not-deleted, just-missing theory, the data recovery software I'm using (Restoration) cannot find only find an handful of the missing files. If they were deleted, I could do a forensic recovery to get them back but since they're probably still somewhere on my computer, just out out of my reach, I can't find them. Under those circumstances, is there a way I can recover those files?

  Read the article

• Debugging Internal Emails with Exchange 2003/2010

  - by user49995

  I am in the middle of migrating from Exchange 2003 to Exchange 2010 SP1. I have moved one mailbox over to the new server EXCHANGE2010 . For some reason if an internal email is sent from someone on EXCHANGE2003 (the old server), it is not delivered to the new mailbox on EXCHANGE2010. Where should I look to debug this problem? What logs should I consult? Update: I found the messages in Queues on the old server, listed as messages with an unreachable destination.

  Read the article

• How to delete vssver2.scc and global.asax from my Windows Server?

  - by rlb.usa

  I have a Windows server that I SFTP into, and I have some very old vssver2.scc files on there. They are used by Visual Source Safe- which is no longer used (SVN instead now). I want to delete them. Most troubling though is a very old global.asax file used by ASP.NET applications - since the app is compiled, it reads from it's global.dll in the Bin folder, and not the global.asax. I want to get rid of it. But I can't - and I can't overwrite it in favor of a newer one either. These files have 444 (Owner:r Group:r Public:r) permission and when I try to give them 777 (O:rwx G:rwx P:rwx) permission hoping it will let me delete them, it goes back to 444.

  Read the article

• Cannot redirect ip traffic with iptables to new ip on linux centOS

  - by Kiwi

  today I able to migrate some of the game servers to another server and needed some help to redirect the traffic from old ip to the new one. SERVER1 1.1.1.1 ----- (internet ) ----- SERVER 2.2.2.2 I asume to use iptables to perform this, for that used this rule on my centOS box in the server1. /etc/sysctl.conf: net.ipv4.ip_forward = 1 iptables -t nat -A PREROUTING -p udp --dest 1.1.1.1 --dport 27015 -j DNAT --to-destination 2.2.2.2:27015 iptables -t nat -A POSTROUTING -j MASQUERADE iptables -t nat -A POSTROUTING -d 2.2.2.2 -p udp --dport 27015 -j SNAT --to 1.1.1.1 But the client cannot connect to the server from the old ip, the redirection don't started.

  Read the article

• find kernel config option in menuconfig

  - by puchu

  I've upgraded my gentoo-sources today to 3.3.8, and now I am looking at diff between old kernel's defconfig and old kernel's .config: there are about 20 changes. I want to apply this changes manually to new kernel's menuconfig. Where can I find tool like: menuconfig-find -v 3.3.8-gentoo CONFIG_KVM_AMD >> Virtualization >> -> Kernel-based Virtual Machine (KVM) support >> -> KVM for AMD processors support

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• Why are my Windows 7 updates continuously failing?

  - by Chris C.

  I'm an advanced level user here with an odd issue. I have two Windows Updates that are failing to install, every single time. I'm getting a mysterious "Code 1" error on both updates, an error for which I'm having difficulty finding a solution. The updates in question are: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Because these updates are failing, the Shut Down button in my start menu always has the shield icon next to it, indicating that "new" updates will be installed on shut down. But, of course, they'll fail and when the PC is restarted, the shield icon is still there. When checking the update history and viewing the details of the failed updates, I get the following: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) Installation date: ?6/?29/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. More information: http://go.microsoft.com/fwlink/?LinkId=216803 and: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Installation date: ?6/?28/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found. More information: http://support.microsoft.com/kb/947821 About My System I'm running Windows 7 Home Premium 64-bit. This is a custom PC build and the OS was installed fresh, not an upgrade from a previous version. I've been running this system for about four months. Windows Updates aside, the system is usually quite stable.

  Read the article

• How to change subversion working copy UUID?

  - by Ioan

  I've recently updated Subversion repositories from an old 1.2.3 version to 1.6.0 via svnadmin dump/load. The old repositories all used the same UUID (repositories were created using by copying a template repository). I've changed the UUID on a couple of the new repositories via svnadmin setuuid to be unique. I can't just relocate my existing working copies of those repositories because the UUIDs are different. I know about exporting the working copy and checking out from the new repository, but I was wondering whether there was a way to just change the UUID of the working copy in-place, like what svnadmin setuuid does for repositories.

  Read the article

• Soundtest works, but no other sounds and windows starts very slowly

  - by Kristian Kari

  So suddenly all sounds on my computer stopped working expect the sound test works, but when I go to control panel and audio it says there's no audio device. And audio players and audio on website doesn't work either. and Also windows starts very slowly. I'm not sure if this helps but I'll tell what happened before this. I downloaded this program from a little shady website, I hesitated and for a good reason I guess cos the moment I finished downloading it, my antivir detected it as unwanted program and put it on quarantine. I thought everything was fine, but had some problems with program (won't go to details about it cos it's not really related to audio) so rebooted the computer and I was suprised that windows started really really slowly. It took like 5 mins to load the desktop such. After that I noticed the sounds were missing, I immediately deleted the program since I thought it was causing the problem. But it didn't change much. I tried to find the solution with no success and now I'm just scanning again my computer. I'd be thankful if anyone would be able to help me. I might have left a thing or ten things out, so feel free to ask. oh and I'm using windows xp

  Read the article

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >