Search Results

Search found 36652 results on 1467 pages for 'linux device driver'.

Page 24/1467 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Remapping Linux serial port device names

    - by davefiddes
    I have a server running Debian Linux which has a built in serial port which is coming up as ttyS0. I have a plug in PCI card with two serial ports that are being registered with Linux as ttyS2 and ttyS3. Unfortunately I am trying to run some software which assumes that ttyS0 and ttyS1 are available. Is it possible to remap the serial port device names (using a udev rule?) such that ttyS0 remains as it is and ttyS2 becomes ttyS1?

    Read the article

  • When to best implement a I2C driver module in Linux

    - by stefangachter
    I am currently dealing with two devices connected to the I2C bus within an embedded system running Linux. I am using an exisiting driver for the first device, a camera. For the second device, I have successfully implemented a userspace program with which I can communicate with the second device. So far, both devices seem to coexist happily. However, almost all I2C devices have their own driver module. Thus, I am wondering what the advantages of a driver module are. I had a look at the following thread... http://stackoverflow.com/questions/149032/when-should-i-write-a-linux-kernel-module ... but without conclusion. Thus, what would be the advantage of writing a I2C driver module over a userspace implementation? Regards, Stefan

    Read the article

  • How to register a function in a driver code as its ISR

    - by CVS-2600Hertz-wordpress-com
    Following the feedback i got from: http://stackoverflow.com/questions/2683682/new-to-linux-kernel-driver-development/2683819 I have written a driver (.c file) by comparing it with an existing driver and "borrowing" heavily from its code. The driver is registered fine and init() and probe() are working fine. I am also able to access the peripheral device registers. :-) However i am a bit hazy about the IRQ/ISR. The peripheral-device is a input device and raises an interrupt on a GPIO pin. How do i move ahead from my current state ( init(), probe(), etc. ) to be able to handle the IRQ and execute my ISR function?? Many-Thanks in Advance

    Read the article

  • Canceling a WSK I/O operation when driver is unloading

    - by eaducac
    I've been learning how to write drivers with the Windows DDK recently. After creating a few test drivers experimenting with system threads and synchronization, I decided to step it up a notch and write a driver that actually does something, albeit something useless. Currently, my driver connects to my other computer using Winsock Kernel and just loops and echoes back whatever I send to it until it gets the command "exit", which causes it to break out of the loop. In my loop, after I call WskReceive() to get some data from the other computer, I use KeWaitForMultipleObjects() to wait for either of two SynchronizationEvents. BlockEvent gets set by my IRP's CompletionRoutine() to let my thread know that it's received some data from the socket. EndEvent gets set by my DriverUnload() routine to tell the thread that it's being unloaded and it needs to terminate. When I send the "exit" command, the thread terminates with no problems, and I can safely unload the driver afterward. If I try to stop the driver while it's still waiting on data from the other computer, however, it blue screens with the error DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS. After I get the EndEvent but before I exit the loop, I've tried canceling the IRP with IoCancelIrp() and completing it with IoCompleteRequest(), but both of those give me DRIVER_IRQL_NOT_LESS_OR_EQUAL errors. I then tried calling WskDisconnect(), hoping that would cause the receive operation to complete, but that took me back to the CANCELLING_PENDING_OPERATIONS error. How do I cancel my pending I/O operation from my WSK socket at the IRQL I'm running at when the driver is unloaded?

    Read the article

  • Install driver by using C++

    - by user296359
    Hi, This is a question about installing driver. I have the following files : aaa.cat aaa.inf x86\ttt.sys I can install this driver by clicking "update driver" in device manager. But now I need to install this driver on Windows (XP, Vista and Win7) by using C++. How could I do this? On the other hand, I can't use install shield or other tool to do the job. That is why I am asking this question. Thanks in advance. I have found this page, which mentioned SetupInstallFile and SetupInstallFileEx functions. Is this the answer? http://msdn.microsoft.com/en-us/library/aa376958%28VS.85%29.aspx

    Read the article

  • NVIDIA graphics driver in Ubuntu 12.04

    - by user924501
    So my overall goal is that I want to be able to code with CUDA enabled applications. However, upon many days of searching, using installation walkthroughs, and reinstalling countless times after driver failure... I'm now here as a last resort. I cannot get Ubuntu 12.04 LTS to install the NVIDIA 295.59 driver for my GeForce GT 540M NVIDIA graphics card. My main system specs is as follows... (I believe having the Intel processor may be the problem) DELL Laptop XPS L502X Intel® Core™ i7-2620M CPU @ 2.70GHz × 4 Intel Integrated Graphics 64 bit NVIDIA GeForce GT 540M Ubuntu 12.04 LTS All other specs are irrelevant unless I forgot something? Methods Tried: aptitude install nvidia-current (all packages) Results: Nothing really happened. Nothing in the additional drivers menu appeared, nor was the NVIDIA X Server settings application allowing access because it thought there was no NVIDIA X Server installed. Downloaded driver from nvidia.com. Set nomodeset in the grub boot menu through /boot/grub/grub.cfg Went to console and turned off lightdm. Installed the driver, but it said the pre-install failed? (mean anything?) Started up lightdm again. Results: NVIDIA X Server settings still didn't notice it. Even tried to do nvidia-xconfig multiple times. I also went into the config file to make sure the driver setting said "nvidia". aptitude install nvidia-173 (all packages) Results: Couldn't find the xorg-video-abi-10 virtual package. It was nowhere to be found and the ubuntu forums everywhere had no answers. Lots of people were having this problem. This is easily done in windows, simply download the driver and debug in visual studio with no problems at all. I'd like clear step-by-step instructions on how I should go about this. I'm relatively new to linux but I can find my way around pretty well so you aren't talking to a straight-up beginner. Also, if you think another thread may have the answer please post because I was having a hard time looking for my specific type of problem. TL;DR I want to have access to my GPU so I can code with CUDA while in Ubuntu 12.04 on my 64 bit laptop that also has Intel integrated graphics on the processor. Solution: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates && sudo apt-get update && sudo apt-get upgrade && sudo apt-get install nvidia-current

    Read the article

  • It's an Oracle Linux Wrap: Oracle Openworld 2012

    - by Zeynep Koch
    Are you still recovering from an amazing Oracle OpenWorld experience? 50,000 attendees had access to thousands of sessions, demos, hands-on-labs, networking opportunities, music concerts, and loads of fun. For the Oracle Linux team, this was a week full of many insightful sessions and customer interactions. In case you were unable to attend Oracle OpenWorld or missed some of content presented, here's a compilation of key session presentations, keynotes, and videos.Go to the Oracle OpenWorld content catalog and access all the session presentations. Oracle Openworld Keynote by Edward Screven Oracle's commitment to Open Source by Edward Screven Oracle Linux Interview with Wim Coekaerts Making the most of mainline kernel by Wim Coekaerts Why DTrace and Ksplice have made Oracle Linux 6 popular by W.Coekaerts How partnership between Oracle Linux and Oracle Partners benefits Sysadmins by Michele Resta Hugepages=Huge Performance on Oracle Linux by Greg Marsden Benefits of Kpslice in your Linux Environment by Tim Hill Oracle Linux, Ksplice and MySQL by Lenz Grimmer We also hosted a successful Oracle Linux Pavilion with 11 of our key partners - Beyond Trust, Centrify, Data Intensity, Fujitsu, HP, LSI, Mellanox, Micro Focus, NetApp, QLogic and Teleran showcased their solutions for Oracle Linux and Oracle VM. Here are some videos from the Oracle Linux Pavilion. Centrify covers Oracle Linux solution they offer at Oracle Linux PavilionMellanox talk about their solution at Oracle Linux Pavilion Eric Pan covers Micro Focus products at Oracle Linux Pavilion There's also collection of the keynotes and executive sessions as on-demand videos posted  here . We hope you find this information useful and look forward to seeing at Oracle OpenWorld 2013! ORACLE LINUX TEAM

    Read the article

  • How to Get MacBook-Style Finger Gestures on Ubuntu Linux

    - by Zainul Franciscus
    Apple users have been swiping, pinching, and rotating Mac’s user interfaces to their fingers’ content. In today’s article, we’ll show you how to do groovy things like expanding and reducing windows, and changing desktops using finger gestures. To accomplish this, we’ll use a piece of software called TouchEgg, which enhances Ubuntu’s multi touch capability by allowing us to configure actions to the finger gestures that TouchEgg supports. If you’re a Windows user and like the idea of finger-gestures, we also wrote a tutorial on how to enable MacBook-Style finger gestures on Windows Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines SnapBird Supercharges Your Twitter Searches Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron

    Read the article

  • Oracle Solutions with Linux on IBM System z

    - by didier.wojciechowski
    Despite the eruption of the Iceland volcano Eyjafjallajokull Paul Bramy Technical Director Oracle Integrated Solutions and Nicolas Marescaux IT Specialist Oracle on IBM System z for Oracle/IBM Joint Solutions Center did this presentation remotely for Collaborate10. If you didn't have seen it yet I highly recommend it.

    Read the article

  • Unable to write into character device file in Ubuntu

    - by Surjya Narayana Padhi
    I just written a linux character driver. I created one character device file named X. I can see that file in /dev folder. Now I want to do some read/write operation into this file. I opened the filed in VI editor and write some text into it. I used :wq and exited. It didn't show any error. Now when I do cat on that same file I am not able to see any content. I tried it several times. The same situation. Please let me know If I am doing something wrong....

    Read the article

  • Register for the Oracle VM & Oracle Linux Partner Day – 25th July, Oracle TVP Reading

    - by Cinzia Mascanzoni
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This event has been set up for our partners to come along and understand more about an untouched opportunity to deliver data centre consolidation solutions for customers who run their business on Oracle software. There is clear message from end customers that virtualizing their tier 1, mission critical applications is high on the CIO’s agenda. Register now.

    Read the article

  • How to Customize Fonts and Colors for Gnome Panels in Ubuntu Linux

    - by The Geek
    Earlier this week we showed you how to make the Gnome Panels totally transparent, but you really need some customized fonts and colors to make the effect work better. Here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Changing the Gnome Colors the Easy Way You’ll first need to install Gnome Color Chooser which is available in the default repositories (the package name is gnome-color-chooser). Then go to System > Preferences > Gnome Color Chooser to launch the program. When you see all these tabs you immediately know that Gnome Color Chooser does not only change the font color of the panel, but also the color of the fonts all over Ubuntu, desktop icons, and many other things as well. Now switch to the panel tab, here you can control every thing about your panels. You can change font, font color, background and background color of the panels and start menus. Tick the “Normal” option and choose the color you want for the panel font. If you want you can change the hover color of the buttons on the panel by too. A little below the color option is the font options, this includes the font, font size, and the X and Y positioning of the font. The first two options are pretty straight forward, they change the typeface and the size. The X-Padding and Y-Padding may confuse you but they are interesting, they may give a nice look for your panels by increasing the space between items on your panel like this: X-Padding:   Y-Padding:   The bottom half of the window controls the look of your start menus which is the Applications, Places, and Systems menus. You can customize them just the way you did with the panel.   Alright, this was the easy way to change the font of your panels. Changing the Gnome Theme Colors the Command-Line Way The other hard (not so hard really) way will be changing the configuration files that tell your panel how it should look like. In your Home Folder, press Ctrl+H to show the hidden files, now find the file “.gtkrc-2.0”, open it and insert this line in it. If there are any other lines in the file leave them intact. include “/home/<username>/.gnome2/panel-fontrc” Don’t forget to replace the <user_name> with you user account name. When done close and save the file. Now navigate the folder “.gnome2” from your Home Folder and create a new file and name it “panel-fontrc”. Open the file you just created with a text editor and paste the following in it: style “my_color”{fg[NORMAL] = “#FF0000”}widget “*PanelWidget*” style “my_color”widget “*PanelApplet*” style “my_color” This text will make the font red. If you want other colors you’ll need to replace the Hex value/HTML Notation (in this case #FF0000) with the value of the color you want. To get the hex value you can use GIMP, Gcolor2 witch is available in the default repositories or you can right-click on your panel > Properties > Background tab then click to choose the color you want and copy the Hex value. Don’t change any other thing in the text. When done, save and close. Now press Alt+F2 and enter “killall gnome-panel” to force it to restart or you can log out and login again. Most of you will prefer the first way of changing the font and color for it’s ease of applying and because it gives you much more options but, some may not have the ability/will to download and install a new program on their machine or have reasons of their own for not to using it, that’s why we provided the two way. Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Splendiferous Array of Culinary Tools [Infographic] Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker

    Read the article

  • Recommended language and IDE for simple linux application [on hold]

    - by niklon
    I want to write a simple program on Debian with Gnome. Application will act as a side bar, giving simple information on online servers statuses. I preferably have a black transparent background(Terminal-like). I'm asking this question because I was previously writing programs in .NET C# for myself, and now I don't want to get to Mono, but something more conventional. What language should I choose for this task? What would be the recommended way to do it?(eg. what IDE)

    Read the article

  • How to Back Up Your Linux System With Back In Time

    - by Chris Hoffman
    Ubuntu includes Déjà Dup, an integrated backup tool, but some people prefer Back In Time instead. Back In Time has several advantages over Déjà Dup, including a less-opaque backup format, integrated backup file browser, and more configurability. Déjà Dup still has a few advantages, notably its optional encryption and simpler interface, but Back In Time gives Déjà Dup a run for its money. How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

    Read the article

  • Linux distro for software development support?

    - by Xie Jilei
    I've spent too much time on setup & maintain a development server, which contains following tools: Common services like SSH, BIND, rsync, etc. Subversion, Git. Apache server, which runs CGit, Trac, Webmin, phpmyadmin, phppgadmin, etc. Jetty, which runs Archiva and Hudson. Bugzilla. PostgresSQL server, MySQL server. I've created a lot of Debian packages, like my-trac-utils, my-bugzilla-utils, my-bind9-utils, my-mysql-utils, etc. to make my life more convenient. However, I still feel I need a lot more utils. And I've spent a lot of time to maintain these packages, too. I think there maybe many developers doing the same things. As tools like subversion, git, trac are so common today. It's not to hard to install and configure each of them, but it took a long time to install them all. And it's time consuming to maintain them. Like backup the data, plot the usage graph and generate web reports. (gitstat for example) So, I'd like to hear if there exist any pre-configured distro for Development Server purpose, i.e., something like BackTrack for hackers?

    Read the article

  • How to Quickly Resize, Convert & Modify Images from the Linux Terminal

    - by Chris Hoffman
    ImageMagick is a suite of command-line utilities for modifying and working with images. ImageMagick can quickly perform operations on an image from a terminal, perform batch processing of many images, or be integrated into a bash script. ImageMagick can perform a wide variety of operations. This guide will introduce you to ImageMagick’s syntax and basic operations and show you how to combine operations and perform batch processing of many images. The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos

    Read the article

  • Migrating Ruby on Rails Website to New Server (Linux)

    - by GarytheWorm
    I have an existing website that is a Ruby on Rails project. I have another server i need to transfer the existing website too. The server i wish to transfer too was originally hosting the website so has the necessary gems/configuration are installed. I have tar the current releases shared dir from the old server and transfered them over to the new server. I have then unpack the tar in the apps directory to the new location which is a different URL path. My problem is now as you can see below that the path on the current - is pointing to the old url. ( i ran ls -la to see owenership) How can i change this current path to read with my new web address? current releases shared sitepack.tar root@server1:/var/www/clients/client1/NEWSITE.com/web/apps# ls -la current - /var/www/OLDSITE.com/web/apps/releases/20120130171636 root@server1:/var/www/clients/client1/NEWSITE.com/web/apps#

    Read the article

  • IPC linux huge transaction

    - by poly
    I'm building and application that requires huge transactions/sec of data and I need to use IPC to for the mutithreaded mutliprocceses communication, I know that there are a lot of methods to be used but not sure which one to choose for this application. This is what the application is gonna have, 4 processes, each process has 4 threads, the data chunk that needs to be transferred between two or more threads is around 400KB. I found that fifo is good choice except that it's 64K which is not that big so i'll need to modify and recompile the kernel but not sure if this is the right thing to do? Anyway, I'm open to any suggestions and I'd like to squeeze your experience in this :) and I appreciate it in advance.

    Read the article

  • How can a driver change the kernel page table?

    - by Naruto
    I am encountering an issue with kernel memory. When my driver finishes running, the other processes in kernel fail to run, for example, I run ls, the command crashes the kernel with error "Corrupted page table" at a specified address. I do not know whether the page table of my driver relates to the page table of other process. How can my driver changes the page table of the other processes? And how the driver of a process relates to the kernel page table? As I know when the driver runs, it will be switched to kernel context. Kernel has its own page table and the driver has it own one. What is the relation among the kernel page table, the page table of my driver and the page table of the other processes when it runs in kernel context?

    Read the article

  • Process monitoring in Linux environment?

    - by poly
    I'm trying to write a multi threaded/processes application and it need to know how to monitor a process from another process all the time. So here is what I have, I have a 2 processes, each with multiple threads that handle the network part, then another 2 process also with multiple threads that interact with DB and with the network processes, what I need to do is that if for example one of the network processes goes down the DB process start sending to the live network process until the second one is up again. I'm using fifo between the DB and the network process. I was thinking of sending messages with message passing all the time but not sure whether this is a good idea or I need to use some other IPC for this issue, or probably neither is good and I need to use entirely something else?

    Read the article

  • OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

    - by ewwhite
    Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

    Read the article

  • Disable or remove filter driver for single HID device

    - by snoopen
    Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

    Read the article

  • How can I remove old kernels/install new ones when /boot is full?

    - by Marcel
    I know this question is asked many times before, however with me it is just a bit different I guess. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 224G 5.2G 208G 3% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 777M 260K 777M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/sda2 90M 88M 0 100% /boot /dev/sda6 1.9G 514M 1.3G 29% /tmp My boot partition is full. Current Kernel: # uname -r 3.2.0-35-generic All Kernels: # dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-37-generic 3.2.0-37.58 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-38-generic 3.2.0-38.60 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iU linux-image-generic 3.2.0.37.45 Generic Linux kernel image So I thought of removing the 3.2.0.32-generic kernel with: # sudo apt-get purge linux-image-3.2.0-32-generic Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.37.45) but 3.2.0.38.46 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). No success. When I try apt-get -f install it also fails: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-34 linux-headers-3.2.0-35 linux-headers-3.2.0-34-generic linux-headers-3.2.0-35-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-generic linux-image-generic The following packages will be upgraded: linux-generic linux-image-generic 2 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 5 not fully installed or removed. Need to get 0 B/4,334 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.99ubuntu13.1) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-37-generic (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-38-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic /boot/vmlinuz-3.2.0-37-generic update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-37-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-38-generic (3.2.0-38.60) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-38-generic /boot/vmlinuz-3.2.0-38-generic update-initramfs: Generating /boot/initrd.img-3.2.0-38-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-38-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-38-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-38-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-37-generic; however: Package linux-image-3.2.0-37-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Package linux-image-generic is not configured yet. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already update-initramfs: Generating /boot/initrd.img-3.2.0-35-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-35-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-37-generic linux-image-3.2.0-38-generic linux-image-generic linux-generic initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Any help would really be appreciated. Update: I did: sudo rm /boot/*-3.2.0-32-generic /boot/*-3.2.0-34-generic After that the following problem with apt-get -f install: root@localhost:/# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-generic The following packages will be upgraded: linux-generic 1 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,722 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Version of linux-image-generic on system is 3.2.0.38.46. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >