Search Results

Search found 18301 results on 733 pages for 'network'.

Page 24/733 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Why am I unable to reach local network computers, but able to browse the web?

    - by Igor Zinov'yev
    I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

    Read the article

  • running .net application over a network

    - by Marlon
    Hello, I need some advice please. I need to enable a .Net application to run over a network share, the problem is that this will be on clients network shares and so the path will not be identical. I've had a quick look at ClickOnce and the publish options in VS2008 but it wants a specific network share location - and I'm assuming this location gets stored somewhere when it does its thing. At the moment the job is being done with a old VB6 application and so gets around all these security issues, but that application is poorly written and almost impossible to maintain so it really needs to go. Is it possible for the domain controller to be set up to allow this specific .Net application to execute? Any other options would be welcomed as I want to get this little application is very business critical. I aught to say that the client networks are schools, and thus are often quite locked down as are the client machines, so manually adding exceptions to each client machine is a big no no. Marlon --Edit-- Apologies, I forgot to mention we're restricted to .net 2.0 for the moment, we are planning to upgrade this to 4.0 but that won't be immediate.

    Read the article

  • how useful is Turing completeness? are neural nets turing complete?

    - by Albert
    While reading some papers about the Turing completeness of recurrent neural nets (for example: Turing computability with neural nets, Hava T. Siegelmann and Eduardo D. Sontag, 1991), I got the feeling that the proof which was given there was not really that practical. For example the referenced paper needs a neural network which neuron activity must be of infinity exactness (to reliable represent any rational number). Other proofs need a neural network of infinite size. Clearly, that is not really that practical. But I started to wonder now if it does make sense at all to ask for Turing completeness. By the strict definition, no computer system nowadays is Turing complete because none of them will be able to simulate the infinite tape. Interestingly, programming language specification leaves it most often open if they are turing complete or not. It all boils down to the question if they will always be able to allocate more memory and if the function call stack size is infinite. Most specification don't really specify this. Of course all available implementations are limited here, so all practical implementations of programming languages are not Turing complete. So, what you can say is that all computer systems are just equally powerful as finite state machines and not more. And that brings me to the question: How useful is the term Turing complete at all? And back to neural nets: For any practical implementation of a neural net (including our own brain), they will not be able to represent an infinite number of states, i.e. by the strict definition of Turing completeness, they are not Turing complete. So does the question if neural nets are Turing complete make sense at all? The question if they are as powerful as finite state machines was answered already much earlier (1954 by Minsky, the answer of course: yes) and also seems easier to answer. I.e., at least in theory, that was already the proof that they are as powerful as any computer.

    Read the article

  • Unmanaged Network Switch vs Managed Network Switch

    - by David
    Currently I have an unmanaged POE switch connected to a Linksys router. I am thinking of upgrading my POE switch to a gigabit POE switch, the only problem is that the switch that I want to get is a managed switch. So here's my question: with a managed switch, can I still connect all of my devices to it and have the devices request IP addresses from the DHCP server within the Linksys router or will the devices request IPs from the managed switch since I believe the switch has its own DHCP server as well?

    Read the article

  • What about parallelism across network using multiple PCs?

    - by MainMa
    Parallel computing is used more and more, and new framework features and shortcuts make it easier to use (for example Parallel extensions which are directly available in .NET 4). Now what about the parallelism across network? I mean, an abstraction of everything related to communications, creation of processes on remote machines, etc. Something like, in C#: NetworkParallel.ForEach(myEnumerable, () => { // Computing and/or access to web ressource or local network database here }); I understand that it is very different from the multi-core parallelism. The two most obvious differences would probably be: The fact that such parallel task will be limited to computing, without being able for example to use files stored locally (but why not a database?), or even to use local variables, because it would be rather two distinct applications than two threads of the same application, The very specific implementation, requiring not just a separate thread (which is quite easy), but spanning a process on different machines, then communicating with them over local network. Despite those differences, such parallelism is quite possible, even without speaking about distributed architecture. Do you think it will be implemented in a few years? Do you agree that it enables developers to easily develop extremely powerfull stuff with much less pain? Example: Think about a business application which extracts data from the database, transforms it, and displays statistics. Let's say this application takes ten seconds to load data, twenty seconds to transform data and ten seconds to build charts on a single machine in a company, using all the CPU, whereas ten other machines are used at 5% of CPU most of the time. In a such case, every action may be done in parallel, resulting in probably six to ten seconds for overall process instead of forty.

    Read the article

  • DHCPv6: Provide IPv6 information in your local network

    Even though IPv6 might not be that important within your local network it might be good to get yourself into shape, and be able to provide some details of your infrastructure automatically to your network clients. This is the second article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. IPv6 addresses for everyone (in your network) Okay, after setting up the configuration of your local system, it might be interesting to enable all your machines in your network to use IPv6. There are two options to solve this kind of requirement... Either you're busy like a bee and you go around to configure each and every system manually, or you're more the lazy and effective type of network administrator and you prefer to work with Dynamic Host Configuration Protocol (DHCP). Obviously, I'm of the second type. Enabling dynamic IPv6 address assignments can be done with a new or an existing instance of a DHCPd. In case of Ubuntu-based installation this might be isc-dhcp-server. The isc-dhcp-server allows address pooling for IP and IPv6 within the same package, you just have to run to independent daemons for each protocol version. First, check whether isc-dhcp-server is already installed and maybe running your machine like so: $ service isc-dhcp-server6 status In case, that the service is unknown, you have to install it like so: $ sudo apt-get install isc-dhcp-server Please bear in mind that there is no designated installation package for IPv6. Okay, next you have to create a separate configuration file for IPv6 address pooling and network parameters called /etc/dhcp/dhcpd6.conf. This file is not automatically provided by the package, compared to IPv4. Again, use your favourite editor and put the following lines: $ sudo nano /etc/dhcp/dhcpd6.conf authoritative;default-lease-time 14400; max-lease-time 86400;log-facility local7;subnet6 2001:db8:bad:a55::/64 {    option dhcp6.name-servers 2001:4860:4860::8888, 2001:4860:4860::8844;    option dhcp6.domain-search "ios.mu";    range6 2001:db8:bad:a55::100 2001:db8:bad:a55::199;    range6 2001:db8:bad:a55::/64 temporary;} Next, save the file and start the daemon as a foreground process to see whether it is going to listen to requests or not, like so: $ sudo /usr/sbin/dhcpd -6 -d -cf /etc/dhcp/dhcpd6.conf eth0 The parameters are explained quickly as -6 we want to run as a DHCPv6 server, -d we are sending log messages to the standard error descriptor (so you should monitor your /var/log/syslog file, too), and we explicitely want to use our newly created configuration file (-cf). You might also use the command switch -t to test the configuration file prior to running the server. In my case, I ended up with a couple of complaints by the server, especially reporting that the necessary lease file wouldn't exist. So, ensure that the lease file for your IPv6 address assignments is present: $ sudo touch /var/lib/dhcp/dhcpd6.leases$ sudo chown dhcpd:dhcpd /var/lib/dhcp/dhcpd6.leases Now, you should be good to go. Stop your foreground process and try to run the DHCPv6 server as a service on your system: $ sudo service isc-dhcp-server6 startisc-dhcp-server6 start/running, process 15883 Check your log file /var/log/syslog for any kind of problems. Refer to the man-pages of isc-dhcp-server and you might check out Chapter 22.6 of Peter Bieringer's IPv6 Howto. The instructions regarding DHCPv6 on the Ubuntu Wiki are not as complete as expected and it might not be as helpful as this article or Peter's HOWTO. But see for yourself. Does the client get an IPv6 address? Running a DHCPv6 server on your local network surely comes in handy but it has to work properly. The following paragraphs describe briefly how to check the IPv6 configuration of your clients, Linux - ifconfig or ip command First, you have enable IPv6 on your Linux by specifying the necessary directives in the /etc/network/interfaces file, like so: $ sudo nano /etc/network/interfaces iface eth1 inet6 dhcp Note: Your network device might be eth0 - please don't just copy my configuration lines. Then, either restart your network subsystem, or enable the device manually using the dhclient command with IPv6 switch, like so: $ sudo dhclient -6 You would either use the ifconfig or (if installed) the ip command to check the configuration of your network device like so: $ sudo ifconfig eth1eth1      Link encap:Ethernet  HWaddr 00:1d:09:5d:8d:98            inet addr:192.168.160.147  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: 2001:db8:bad:a55::193/64 Scope:Global          inet6 addr: fe80::21d:9ff:fe5d:8d98/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 Looks good, the client has an IPv6 assignment. Now, let's see whether DNS information has been provided, too. $ less /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTENnameserver 2001:4860:4860::8888nameserver 2001:4860:4860::8844nameserver 192.168.1.2nameserver 127.0.1.1search ios.mu Nicely done. Windows - netsh Per description on TechNet the netsh is defined as following: "Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a computer that is currently running. Netsh also provides a scripting feature that allows you to run a group of commands in batch mode against a specified computer. Netsh can also save a configuration script in a text file for archival purposes or to help you configure other servers." And even though TechNet states that it applies to Windows Server (only), it is also available on Windows client operating systems, like Vista, Windows 7 and Windows 8. In order to get or even set information related to IPv6 protocol, we have to switch the netsh interface context prior to our queries. Open a command prompt in Windows and run the following statements: C:\Users\joki>netshnetsh>interface ipv6netsh interface ipv6>show interfaces Select the device index from the Idx column to get more details about the IPv6 address and DNS server information (here: I'm going to use my WiFi device with device index 11), like so: netsh interface ipv6>show address 11 Okay, address information has been provided. Now, let's check the details about DNS and resolving host names: netsh interface ipv6> show dnsservers 11 Okay, that looks good already. Our Windows client has a valid IPv6 address lease with lifetime information and details about the configured DNS servers. Talking about DNS server... Your clients should be able to connect to your network servers via IPv6 using hostnames instead of IPv6 addresses. Please read on about how to enable a local named with IPv6.

    Read the article

  • Ubuntu 10.10 Network Issues (wireless as well as wired)

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10 . I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd . so happily i installed ubuntu 10.10 . As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer . The net was on and i was able to surf the net . all hunky dory so far . However on the next boot the fun started . It did not detect the wireless network . I could not see the network manager icon in the systray . I used ifconfig and saw that the entry for eth1 was missing .I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar . Wifi-Radar detected the wireless network . I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings . However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed . For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net . Then i foolishly decided to reboot my PC . And wonders of wonders , the same problem appeared . I cannot see eth0 in my ifconfig anymore . i used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared .Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? .PS : 1) i tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • Wired and Wireless Network Issues with PPPoE

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • Taking a Chomp out of a (Social Network) Product Hype

    - by kellsey.ruppel
    Andrew Kershaw, Senior Director Oracle Social Network Product Development, speaks about Oracle Social Network One of our competitors is being very aggressive with its own developed Social Network add-on, but there should be no doubt in the minds that the Oracle social capabilities available with Fusion CRM stack up well against it. Within the Oracle Cloud, we have announced a product called Oracle Social Network. That technology is pre-integrated into Fusion Applications, enabling your customer to build a collaborative and social enterprise (without all the noise!). Oracle Social Network is designed together with our Fusion Applications. It is very conveniently pre-integrated with CRM, HCM, Financials, Projects, Supply Chain, and the Fusion family. But what's even better is that the individual teams can take a considered approach to what they are trying to achieve within the collaboration process and the outcome they are trying to enable. Then they can utilize the network and collaboration tools to support that result. And there's more! The Fusion teams can design social interactions that bridge across and outside their individual product lines because we have more than just a product line and they know they have the social network to connect them. I know we have a superior product, but it is our ability to understand and execute across the enterprise that will enable us to deliver a much more robust and capable platform in the short term than our competitor can. We have built a product specifically designed for enterprise social collaboration which is not the same for the competition. We have delivered a much more effective solution - one in which individuals can easily collaborate to get results, while being confident that they know who has access to their information. Our platform has been pre-built to cross the company boundaries and enable our customers to collaborate, not just with their customers, but with their partners and suppliers as well. So Fusion addresses the combination of the enterprise application suite with enterprise collaboration and social networking. Oracle Social Network already has a feature function advantage over our competitor's tool providing a real added value to the employees. Plus Oracle has the ability to execute in a broad enterprise and cross-enterprise way that our competitors cannot. We have the power of a tool that provides the core social fabric across all of the applications, as well as supporting enterprise collaboration. That allows us to provide intelligent business insight, connections, and recommendations that our competitor simply can't. From our competitors, customers get integration for Sales; they get integration for Service, but then they have to integrate every other enterprise asset that they have by themselves. With Oracle, we are doing the integration. Fusion Applications will be pre-integrated, and over time, all of the applications in the business suite, including our Applications Unlimited and specialist industry applications, will connect to the Oracle Social Network. I'm confident these capabilities make Oracle Social Network the only collaboration platform on which to deliver the social enterprise.

    Read the article

  • How are paths determined on a remote machines?

    - by xarzu
    How are paths determined on a remote machines? I have been assigned a network loaction. Let's call it \wassup\test1 I assume that wassup is the ame of the computer. The question I have is this. How can I determine what the local path from the point of view of the remote machine would be for "test1". For example, how would I know if it is c:\test1 or d:\test1 ?

    Read the article

  • Which development Language is best suited to Network Inventory

    - by dastardlyandmuttley
    Dear stackoverflow I hope this is the corrcet type of question for stackoverflow to consider I would like to develop a "Hard Core" application that performs Network Inventory. High level requirements are Work on Windows and UNIX networks it has to be extremly performant it has to be 100% accuarate (massively) scalable and fun to write The sort of details I am after is manufacturer and versions of all major workstation hardware components such as motherboard, network card, sound card, hard drives, optical drives, memory, BIOS details, operating system information etc. I dont want to have to distribute a client on each workstation to collect the information although i will require automatic worksattion discovery I would value your thoughts on the best development language to employ I know there are products such as NEWT and stuff like nmap... I would like to do this type of technical programming myself "from scratch" Warm Regards DD

    Read the article

  • Modeling software for network serialization protocol design

    - by Aurélien Vallée
    Hello, I am currently designing a low level network serialization protocol (in fact, a refinement of an existing protocol). As the work progress, pen and paper documents start to show their limits: i have tons of papers, new and outdated merged together, etc... And i can't show anything to anyone since i describe the protocol using my own notation (a mix of flow chart & C structures). I need a software that would help me to design a network protocol. I should be able to create structures, fields, their sizes, their layout, etc... and the software would generate some nice UMLish diagrams.

    Read the article

  • How to acces File over the Network

    - by Polo
    Hi! I am having a hard time on this one, I have à folder over the network wit public accès (no credential restriction). I am trying to do à File.Exist or Directory.Exist and I keep on having a exception. Can somewone tell me the good way to do IO over the network. EDIT 1 FOR DETAILS: if i do execture = \agoodip\Public\test.txt I get the file etc etc In my code it look like a basic Directory.Exist(@"\agoodip\Public") or File.exist(@"\agoodip\Public\test.txt") The exception I get is Path not found. Thanks!

    Read the article

  • Creating a local CDMA or GSM network?

    - by Jeffrey Sambells
    I am developing a number of different mobile applications for a number of different mobile devices and I want to quickly test in a local development environment. I was wondering if it is possible (with some sort of hardware) to set up a local desktop CDMA / GSM base station for testing devices over a local personal cellular network. The range does not have to be very far. The alternative is purchasing a SIM card and plans for various carriers but not all carriers/network types are available in our area. I'm sure I had seen some sort of desktop device that would let you setup local networks for development/testing purposes but can't seem to find it. Thanks.

    Read the article

  • C# Network Printing

    - by tanthiamhuat
    I am able to get the list of network printers via this code: private void Form1_Load(object sender, EventArgs e) { foreach (String printer in PrinterSettings.InstalledPrinters) { listBox1.Items.Add(printer.ToString()); } } For each network printer, I want to extract out more information like: (a) get document information, like number of pages printed, filename, file-size, etc. (b) get computer IP address from which document was printed. (c) get username of who printed the document. How do I achieve the above? any code samples would be appreciated. Do I have to look into Windows Management Instrumentation(WMI) stuffs?

    Read the article

  • streaming to correct network interface

    - by robin hood
    I have IP cam that supports RTSP streaming. It's connected to router with 2 network cards with IP1 and IP2 addresses. I make 2 connections to IP cam by IP1 and IP2 addresses from the same IP and I need to receive corresponding streams thru correct network card, but both streams (RTP over UDP) go thru IP1. How this can be resolved? I don't know if RTSP server binds UDP sockets to corresponding IP and I don't know what IP stack is in IP cam (weak end system or strong end system). I haven't found anything interesting in router configuration. As I understand, routing table cannot help me cos I'm connected from the same IP, is it right? Also Sorry for incomplete info but it's all I have at the moment. Thanks for your time.

    Read the article

  • Network Communication program in python

    - by lamnep
    Hi all, Basically what I'm trying to achieve is a program which allow users to connect to a each other over a network in, essentially, a chat room. What I'm currently struggling with is writing the code so that the users can connect to each other without knowing the IP-address of the computer that the other users are using or knowing the IP-address of a server. Does anyone know of a way in which I could simply have all of the users scan the IP range of my network in order to find any active 'room' and then give the user a chance to connect to it? Also, the hope is that there will be no need for a central server to run this from, rather every user will simply be connected to all other user, essentially being the server and client at the same time.

    Read the article

  • Game network physics collision

    - by Jonas Byström
    How to simulating two client-controlled vehicles colliding (sensibly) in a typical client/server setup for a network game? I did read this eminent blog post on how to do distributed network physics in general (without traditional client prediction), but this question is specifically on how to handle collisions of owned objects. Example Say client A is 20 ms ahead of server, client B 300 ms ahead of server (counting both latency and maximum jitter). This means that when the two vehicles collide, both clients will see the other as 320 ms behind - in the opposite direction of the velocity of the other vehicle. Head-to-head on a Swedish highway means a difference of 16 meters/17.5 yards! What not to try It is virtually impossible to extrapolate the positions, since I also have very complex vehicles with joints and bodies all over, which in turn have linear and angular positions, velocities and accelerations, not to mention states from user input.

    Read the article

  • Make network changes permanent - C++

    - by pparescasellas
    I need to allow an external client to change the IP of the Linux machine where the program is running (C++). I already know how to list all the local interfaces and the current IPs assigned to them. I also know how to programatically change said IPs. What I need to know is how to make this change permanent so, if the machine reboots, it keeps the same network configuration. What's the best way to do this? Manually parsing /etc/network/interfaces? Calling some linux command? Edit: I'm using Debian. Thanks!

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >