Search Results

Search found 9266 results on 371 pages for 'alex block'.

Page 240/371 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • Limiting and redirect port access with useragent

    - by linuxcore
    I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

    Read the article

  • Configure httpd.conf alias/subdirectory point to another server

    - by azrim
    Hi, I,m having a web server for testing purposes to host my domain http://www.domain.com which run perfectly. Below is server specs: OS Freebsd 7.2 MySQL 5.1.33 Apache 2.2.11 PHP 5.2.9 I can do alias directory in my httpd.conf so that my domain can have subdirectory hosting in the same server such as httpd://domain.com/subdomain1, httpd://domain.com/subdomain2 and so on. All my subdomain1 and subdomain2 directory folders reside on the same web server but only different location. Below is my example from httpd.conf for the alias subdomain1 block: Alias /subdomain1 "/usr/local/www/subdomain1" <Directory "/usr/local/www/subdomain1"> Options +Indexes AllowOverride None allow from all </Directory> I,m looking a way in order my subdomain1 and subdomain2 directory is read from another server in my LAN but remain hosted as httpd://domain.com/subdomain1. Really appreciate anyone know how to do this. Thanks,

    Read the article

  • Proxy Server suggestions

    - by Jon Menefee
    Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

    Read the article

  • Disable OS X Portable Home Directories for specific hosts for all users, not just individuals?

    - by Paul Nendick
    Would it be possible to block any and all Portable Home Directory services for specific hosts? Something like MCX's "MobileAccountNeverAsk-" but for the whole workstation? We have a network with both portable and stationary machines. I'd like our users to be able to use all machines, going portable on the MacBook but not being bothering with syncing when logged into stationary iMacs or Mac Pros. The Open Directory servers are running Snow Leopard (for now) and all clients are running Lion. Thanks! Paul

    Read the article

  • Cannot connect to HTTPS port on Ubuntu

    - by Simpleton
    I've installed a new SSL certificate and set up Nginx to use it. But requests time out when trying to hit HTTPS on the site. When I telnet to my domain on port 80 it connects, but times out on port 443. I'm not sure if there's some defaults on Ubuntu preventing a connection. UFW status shows: 443 ALLOW Anywhere netstat -a shows: tcp 0 0 *:https *:* LISTEN nmap localhost shows: 443/tcp open https The relevant block in the Nginx config is: server { listen 443; listen [::]:80 ipv6only=on; listen 80; root /path/to/app; server_name mydomain.com ssl on; ssl_certificate /etc/nginx/ssl/ssl-bundle.crt; ssl_certificate_key /etc/nginx/ssl/server.key; location / { proxy_pass http://mydomain.com; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } }

    Read the article

  • How to force or redirect to SSL in nginx?

    - by Callmeed
    I have a signup page on a subdomain like: https://signup.mysite.com It should only be accessible via HTTPS but I'm worried people might somehow stumble upon it via HTTP and get a 404. My html/server block in nginx looks like this: html { server { listen 443; server_name signup.mysite.com; ssl on; ssl_certificate /path/to/my/cert; ssl_certificate_key /path/to/my/key; ssl_session_timeout 30m; location / { root /path/to/my/rails/app/public; index index.html; passenger_enabled on; } } } What can I add so that people who go to http://signup.mysite.com get redirected to https://signup.mysite.com ? (FYI I know there are Rails plugins that can force SSL but was hoping to avoid that)

    Read the article

  • Windows Server 2008 constantly spamming external IP's on outbound TCP port 445

    - by RSXAdmin
    Hi Server Fault, I have a Windows Server 2008 box running as a Domain Controller. I have noticed in my Cisco ASA firewall logs that this box is continuously sending out (like a thousand requests a second) requests on TCP port 445 to external hosts. I have made an effort to deny this outbound traffic from getting on the internet (using the ASA), however I would like these requests to stop from even occurring at all. I have tried disabling TCP/IP over NetBIOS. I have even turned on Windows Advanced Firewall on the box itself to block outbound 445 but the ASA still detects this particular traffic hitting it. I have other DC's and similar type boxes which are not behaving the same way as this box. Is this normal? Is there a way to stop this spamming? Have I been infected? Thank you universe.

    Read the article

  • Is it possible to extend a 504 timeout in nginx on a per location basis

    - by codecowboy
    Is it possible to set timeout directives within a location block to prevent nginx returning a 504 from a long running PHP script (PHP-FPM? location /myurlsegment/ { client_body_timeout 1000000; send_timeout 1000000; fastcgi_read_timeout 1000000; } This has no effect when making a request to example.com/myurlsegment. The timeout occurs after approximately 60 seconds. PHP is configured to allow the script to run until completion (set_time_limit(0)) I don't want to set a global timeout for all scripts.

    Read the article

  • When can an FTP server close its passive connections?

    - by Don Kirkby
    Does the FTP protocol allow the server to close any of its passive connections while the client is still connected? Can it tell when the client is finished receiving and then close the connection? I'm including an FTP server in my application using the pyftpdlib Python project. I've got it to work in active and passive mode, but I'm a bit concerned about when it closes its passive connections. I've tried connecting to it with both FileZilla and the default ftp command in Ubuntu, and in both cases, I get a new passive port for every request. That is, if I sit in the root folder and type ls 10 times, I use up 10 ports. This means that I have to allocate a big block of passive ports for the FTP server to use so it won't run out. As soon as the client disconnects, the server releases all the passive connections associated with that client and those ports can be reused. However, a long-running connection could use up a lot of ports.

    Read the article

  • How to stop domain users from installing any software?

    - by Chris
    Hi everyone, I was wondering which policies, etc I could setup to stop any installations from occurring in a server 2003 domain environment? I have 2003 RC2 and XP Pro clients. I guess the quick easy way is to make everyone guests, but this also blocks them from other things that they might need to do/access. I've seen a lot of ideas but they do not fully block everything. I know there probably isn't a fix all but would like to get as close as possible. Thank you all,

    Read the article

  • How to make the cursor shape dependent on the current Vim mode using iTerm2 on OS X and zsh

    - by i0n
    I am using zsh and iTerm2 to edit with Vim. I really love the integration and portability, and because of that I have chosen not to use MacVim. But.... I can't work out how to get my cursor to change from a block to a line when in Vim's insert mode. I've been lead to believe that it's not possible by standard means, but people seem to think that it is possible using zsh. I've done as much Google searching as I can take without an answer, any help or advice would be greatly appreciated.

    Read the article

  • Get the "source network address" in Event ID 529 audit entries on Windows XP

    - by Make it useful Keep it simple
    In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

    Read the article

  • ext4 loopback device, Buffer I/O Error on reboot

    - by cvb
    I am trying to mount a loopback device on my ext4 formatted ssd drive. I get these errors when I reboot on Linux kernel 2.6.38.8 Buffer I/O error on device loop1, logical block 0 Here is what I do: dd if=/dev/zero of=/mnt/s/lodev bs=4096 count=250000 mkfs.ext4 /mnt/s/lodev mount -n -o loop,rw /mnt/s/lodev /mnt/test The loopback mount is successful, but on reboot I get errors as mentioned above. Even mouting with 'sync','data=writeback' does not help. I tried to losetup a device, but see the same behavior. I also reformatted the base device and created the loopback device and mounted as above, I still see these errors. I do not see them when I format them as vfat. Appreciate any suggestions on this problem.

    Read the article

  • Backup tape compression

    - by pufferfish
    What things should I check to confirm that compression is actually happening on our tape backup system? Although the tapes are marked as 200G/520G (native/compressed) capacity, they seem to fill up before the 200G mark (some less than 100G). I'm using - Sony AIT-4 tape autochanger - Sony SDX4-200C (AIT-4) tapes - Ubuntu Lucid - Bacula I've tried checking hardware compression with: tapeinfo -f /dev/nst0, which gives Product Type: Tape Drive Vendor ID: 'SONY ' Product ID: 'SDX-900V ' Revision: '0102' Attached Changer API: No SerialNumber: '0001000036' MinBlock: 2 MaxBlock: 8388608 SCSI ID: 1 SCSI LUN: 0 Ready: yes BufferedMode: yes Medium Type: Not Loaded Density Code: 0x33 BlockSize: 0 DataCompEnabled: yes DataCompCapable: yes DataDeCompEnabled: yes CompType: 0x3 DeCompType: 0x3 BOP: yes Block Position: 0 Partition 0 Remaining Kbytes: 201778000 Partition 0 Size in Kbytes: 201779000 ActivePartition: 0 EarlyWarningSize: 0 NumPartitions: 0 MaxPartitions: 0 ... so I presume it's on. Notes: The Bacula documentation says hardware compression needs to be enable with "system tools such as mt"

    Read the article

  • Exchange Server 2003 Drive Error

    - by Saif Khan
    My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

    Read the article

  • nginx: URL rewrites and performance

    - by j0nes
    I have a website where I need to change the URL structure. The old URLs look like /olddir/part1_de.htm, the new ones will look like /newdir/sub/category/anotherpage.htm. There are a lot of URL rewrites I need to do, I assume about 500 distinct rewrites in the end. As my website gets quite a lot of traffic, my main concern is about performance at the moment. My questions are: I assume that for each request, the rewrites block will be parsed and the regex will be evaluated. Am I right? Will there be a performance penalty if I use these rewrites? Can nginx handle this? Are there any "best practices" to follow when doing a lot of rewrites?

    Read the article

  • Preventing my postfix to send my local users spam

    - by Jack
    I have a postfix/dovecot mail server with 100 different users. When they send an email they need to be authenticated. I successfully use saslauth to achieve this. Few days ago I had a problem. One specific user, probably with a virus or a spam-bot installed in its computer, started to send out through my server thousands of emails in few hours. As result, my ip has been blocked by many isp provider (@aol, @yahoo, and others) and has been listed in many blacklist, making all my 100 users unable to send any email to anyone. What is the best practice to avoid this problem? It would be great if my server could recognize a spamming user and automatically block it. Also, have a limit of, say, 30 emails per hour could be a partial solution. Any idea how to face this problem? Thank you

    Read the article

  • Lighttpd referer issue

    - by Chris
    I have a problem to block files from accessing from different domains as my one. I have added to my lighty config in the "virual host" following: $HTTP["referer"] !~ "^($|http://www\.my-site\.net)" { url.access-deny = ( "" ) } but anyway the site www.example.com can access http://player.my-site.net/player.swf, also it can be accessed directly without a referrer. any idea? //EDIT here is my old apache .htaccess with a rewrite rule thats works perfect, but i dont know how to convert it for lighty: RewriteEngine on RewriteBase / RewriteCond %{HTTP_REFERER} !^http://my-site\.net/ [NC] RewriteCond %{HTTP_REFERER} !^http://www\.my-site\.net/ [NC] RewriteCond %{HTTP_REFERER} !^http://player\.my-site\.net/ [NC] RewriteCond %{HTTP_REFERER} !^http://stream\.my-site\.net/ [NC] RewriteRule .* - [L,R=404]

    Read the article

  • Error while mounting home directory on different logical volume

    - by RCola
    I created RAID 5 form 3 hard drives. Formatted as ext4 this raid array. Created VG0 group and lv_home logical volume in LVM. Then I tried to mount default /home directory on lv_home, while trying to mount logical volume lv_home to folder containing user profiles /home, getting error: mount: wrong fs type, bad option, bad superblock on /dev/mapper/VG0-lv_home next is seems to be symbolic link: # file -s /dev/VG0/lv_home /dev/VG0/lv_home: symbolic link to `../mapper/VG0-lv_home' then # file -s /dev/mapper/VG0-lv_home /dev/mapper/VG0-lv_home: data and lvm> pvs PV VG Fmt Attr PSize PFree /dev/md0 VG0 lvm2 a- 2.02g 68.00m lvm> lvdisplay --- Logical volume --- LV Name /dev/VG0/lv_home VG Name VG0 LV UUID WzJus7-2yV8-yhog-Ju1b-TpWH-IIAI-LIutwe LV Write Access read/write LV Status available # open 0 LV Size 1.17 GiB Current LE 300 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:0

    Read the article

  • Is there a way to define a rule on a bridge that will return reply for ARP request

    - by user1495181
    client (IP = 1.1.1.1) - bridge (brctl) - server (IP = 2.2.2.2) (all machine are Ubuntu). The client block arp request. (there are multiple clients ) I need to define a rule on the bridge machine that will return the client MAC when it get ARP request for IP 1.1.1.1. I see that in ebtables there is an arpreply option , but i didnt manage to find an example to define the arpreply by given arp request ip. ebtables -t nat -A PREROUTING -p arp -j arpreply --arpreply-mac 00:09:5B:91:56:08 Can you please adcive

    Read the article

  • Cant remove/delete symlink

    - by user477519
    I have tried to create a symlink and it threw this error: ln: accessing `.test': Permission denied Now I can't unlink or delete the symlink file. Tried Googling for help but could not find a solution. Please find the results of following commands. stat .test : File: `.test'stat: cannot read symbolic link `.test': Permission denied Size: 26 Blocks: 0 IO Block: 16384 symbolic link Device: 1fh/31d Inode: 312075453 Links: 1 Access: (0777/lrwxrwxrwx) Uid: (11160/ chatt) Gid: (11307/ pgr) Access: 2012-11-12 11:36:51.167327500 +0000 Modify: 2012-11-12 11:36:51.163331700 +0000 Change: 2012-11-12 11:36:51.163331700 +0000 Birth: - chattr -i .test: chattr: Permission denied while trying to stat .test lsatter .test lsattr: Operation not supported While reading flags on .test Any help would be appreciated. Thanks

    Read the article

  • Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

    - by Nate
    I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

    Read the article

  • How to allow a single domain name with iptables

    - by Claw
    I am looking for a way to make iptables only accept requests for my domain name and reject the others. Lately I misconfigured my apache proxy, it is now fixed, but I keep receiving a load of requests looking like that : xxxx.xx:80 142.54.184.226 - - [12/Sep/2012:15:25:14 +0200] "GET http://ad.bharatstudent.com/st?ad_type=iframe&ad_size=700x300&section=3011105&pub_url=${PUB_URL} HTTP/1.0" 200 4985 "http://www.gethealthbank.com/category/medicine/" "Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" xxxx.xx:80 199.116.113.149 - - [12/Sep/2012:15:25:14 +0200] "GET http://mobile1.login.vip.ird.yahoo.com/config/pwtoken_get?login=heaven_12_&src=ntverifyint&passwd=7698ca276acaf6070487899ad2ee2cb9&challenge=wTBYIo2AEdMFr6LtdyQZPqYw9FS9&md5=1 HTTP/1.0" 200 425 "-" "MobileRunner-J2ME" which I would like to block. How can I manage this ?

    Read the article

  • Home Directory Folders

    - by George
    I am looking for a way to acomplish the following: Currently users have home drives mapped via AD profile as follow: \\fileserver\users\username However if once a user was able to access \\fileserver\users and view everyones folder, but had no access to them. This is not ideal since we have people saving important stuff to on their drives. How can I restrict users permissions and views only to THEIR home drives? I also saw this solution, but not sure if it would apply to me: ================================================================================ Share level permissions - Everyone full permission and remove all others On the file/folder level set the following: Authenticated users special permissions on the root of the \\server\homeshare\ to Check the boxes next to the following: Traverse folder / execute file List Folder / read data Read attributes Read extended attributes / List item All other boxed leave unchecked and make sure you apply "This Folder Only" Domain Adminsfull rights and apply “this folder, subfolders, and files” This will block the users from accessing other user home directories. When you create the new user and set the home directory it will create the folder for you with the correct permissions.

    Read the article

  • NFS of NAS server blocks in cluster environment

    - by Zardoz
    In our department we have an Iomega NAS (px4-300d) connected to a Supermicro cluster with 5 nodes (12 cores per node). Each node mounts a share on that NAS by using NFS. Unfortunately after some time (several minutes) of permanent read/write operations (from all nodes) the NAS starts to block and a bit later freezes completely. We tried several options of the mount command, but nothing helped (async, intr, wsize, rsize). The NAS itself doesn't allow many options (better to say none). Do you have any recommendation how to integrate a NAS using NFS in a cluster environment?

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >