condition variable - Page 241

Apache RewriteRule ignoring RewriteCond?

- by winsmith

So I have an Apache running on OSX Server 10.4 (don't ask) with multiple sites. In 0002_[example.com].conf, I have this bit of code: <Directory "/Library/WebServer/Documents/secret/"> RewriteEngine On RewriteCond %{REMOTE_ADDR} !^137\.250\. RewriteRule .* /messages/secret.html </Directory> However, in this configuration, the RewriteCond always seems to evaluate to false, since the secret directory gets shown even if the client's address does not begin with 137.250. If I change the config to this <Directory "/Library/WebServer/Documents/secret/"> RewriteEngine On RewriteRule .* /messages/secret.html RewriteCond %{REMOTE_ADDR} !^137\.250\. </Directory> the condition either does not get evaluated at all or always evaluates to true. Either way, all clients get blocked. What am I doing wrong?

Read the article

How to connect 2 virtual machines(VMWare Workstation 7.0) in a separate network?

- by goluhaque

There are supposed to be 2 networks: i) The first one is the one which all the virtual machines and the host share(Host-only condition). This one is easily achievable for me, as an amateurish beginner. ii)The second network is the one in which only 2 virtual machines are to be connected. These 2 virtual machines should also be connected to the Network(i). I understand that for the 2 virtual hosts that are to be connected in a separate networks simultaneously, it means that they need to have 2 IPs, and hence 2 ports(physical)/ethernet interfaces?

Read the article

Google chrome proxy authentication dialogue timeout

- by Nihar Sarangi

I am on a network that uses LDAP proxy for authentication based on a username and password. Whenever I start Google Chrome, it pops up with a proxy authentication dialogue, but the dialogue disappears automatically after variable amount of time (sometimes it stays for 5 seconds some times less than 1 second). I have found the same issue with Chromium also. Is there any configuration I can set to control this timeout, or say, auto-authenticate with my authentication details from the shell or DE (Gnome3 on Arch)?

Read the article

cygwin, PATH problem?

- by jayjaypg22

I run a .ksh containing a awk call. awk.exe and his shortcut awk is in /bin/awk, /bin is in the PATH environment variable. But when I try to launch awk, I have this error message : bash: /usr/bin/awk: no such file or directory Why didn't bash look for it in the /bin folder too? edit : tar has the same rights, tar.exe is in /bin and can be listed in /usr/bin/, the exact same way than awk. Tar works fine whereas awk not.

Read the article

Excel: How to Compare Column Values in a Row

- by spazzie

I have a bunch of comparison data and a lot of entries being compared. As an example, say my sheet looks like this, give or take a few columns: Item Price1 Quantity1 Price2 Quantity2 Price3 Quantity3 001 $123 12 $456 24 $789 48 002 $100 95 $200 5 $300 51 For each item (row), I want to be able to look at all of the Quantity columns and find which one has the highest quantity. Ideally I'd be able to run a condition of some sort on the entire excel sheet at once, and it would highlight in red the highest quantity. So the results would be a red "48" (qty3) for Item 001 and a red "95" (qty1) for Item 002. Only the color would change, not any data, and no new rows would need to be created. Let me know if you need more info

Read the article

How to get selected values from a dynamically created DropDownList Array after PostBack (Button Click)

- by user739280

I have a CheckBoxList that contains Employee Names on a Wizard Step. When employees are selected and the active step is changed, the Wizard1_ActiveStepChanged function is called and it dynamically creates a DropDownList Array for each employee that is selected. Each DropDownList specifies a condition of the employee. The DropDownList is created properly. When the user clicks submit, the DropDownList array is deleted and no selected values can be pulled from the array. I understand this is an issue with the PostBack and can be fixed with ViewState, but I am trying to figure out what I can do to fix it. ViewState is enabled for the checkboxlist and the DropDownList. This is what I have in the body of my System.Web.UI.Page class private int empcount; private DropDownList[] DDL_Emp { get { return (DropDownList[])ViewState["DDL_Emp"]; } set { ViewState["DDL_Emp"] = value; } } The relevant code: protected void Wizard1_ActiveStepChanged(object sender, EventArgs e) { if (Request.QueryString["type"] == "Accident" && BulletedList1.Items.Count > 0) { this.empcount = 0; for (int i = 0; i < CBL_EmpInvolved.Items.Count; i++) { if (CBL_EmpInvolved.Items[i].Selected) { this.empcount++; } } if(this.empcount > 0) { this.DDL_Emp = new DropDownList[this.empcount]; for (int i = 0, j=0; i < CBL_EmpInvolved.Items.Count; i++) { if (CBL_EmpInvolved.Items[i].Selected) { List<ListItem> cond = new List<ListItem>(); cond.Add(new ListItem("Disabled", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Diseased - Fatality", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("On Treatment - Short Term Disability", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("On Treatment - Long Term Disability", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Back to Work", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Relocated", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Transferred", CBL_EmpInvolved.Items[i].Value)); this.DDL_Emp[j] = new DropDownList(); this.DDL_Emp[j].ID = "DD_LabCondition_" + CBL_EmpInvolved.Items[i].Value; this.DDL_Emp[j].EnableViewState = true; this.DDL_Emp[j].Visible = true; this.DDL_Emp[j].Items.AddRange(cond.ToArray()); this.DDL_Emp[j].Items.Insert(0, new ListItem("-- Select condition of employee: " + CBL_EmpInvolved.Items[i].Text, "")); PH_LabCondition.Controls.Add(this.DDL_Emp[j]); j++; } } PH_LabCondition.Visible = true; MV_LabCondition.Visible = true; Label1_ReportTitle.Text += "Control Count: " + PH_LabCondition.Controls.Count.ToString(); } MV_LabCondition.ActiveViewIndex = 1; MV_LostTime.ActiveViewIndex = 1; } } This code is giving me the following error now: Type 'System.Web.UI.WebControls.DropDownList' in Assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' is not marked as serializable. I've tried changing buttons to images, playing with the AutoPostBack feature. I'm lost on how to get my dropdownlist array saved to the ViewState and accessing it after the postback.

Read the article

MSBUILD ClickOnce Error: Deployment and application do not have matching security zones

- by fande455

We're trying to publish a ClickOnce application through msbuild. We've got it working fine for an installed version of the windows application. However, when we set install to false so that it just runs the app from the web we get the following error when we try to run the application from the URL: "Deployment and application do not have matching security zones" This works fine in IE. We only get the error message in Chrome and FireFox. Here is a sample of the project file settings. <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="3.5"> <PropertyGroup> <SrcTreeRoot>$(MSBuildProjectDirectory)\..\..\..</SrcTreeRoot>  <ProjectGuid>{8205E593-F400-41AE-8D6F-DEA290B2DCF9}</ProjectGuid> <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration> <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform> <ApplicationIcon>Graphics\EDA Icon.ico</ApplicationIcon> <AssemblyName>DASHQueryBuilder</AssemblyName> <OutputType>WinExe</OutputType> <RootNamespace>TetraData.Analyzer</RootNamespace> <FileUpgradeFlags> </FileUpgradeFlags> <OldToolsVersion>2.0</OldToolsVersion> <IsWebBootstrapper>false</IsWebBootstrapper> <ManifestCertificateThumbprint>...</ManifestCertificateThumbprint> <GenerateManifests>true</GenerateManifests> <SignManifests>true</SignManifests> <SignAssembly>true</SignAssembly> <ManifestKeyFile>$(BuildDir)\Certificates\TetraDataCode.pfx</ManifestKeyFile> <ProductVersion>9.0.21022</ProductVersion> <PublishUrl>http://localhost/DASHQueryBuilder/</PublishUrl> <Install>false</Install>  <UpdateEnabled>false</UpdateEnabled> <MapFileExtensions>true</MapFileExtensions> <PublisherName>Follett Software Company</PublisherName> <TrustUrlParameters>true</TrustUrlParameters> <ApplicationRevision>0</ApplicationRevision> <UseApplicationTrust>false</UseApplicationTrust> <PublishWizardCompleted>true</PublishWizardCompleted> <BootstrapperEnabled>false</BootstrapperEnabled> </PropertyGroup> <Import Project="$(SrcTreeRoot)\Build\TaskInit.Tasks" /> <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" /> <Import Project="$(SrcTreeRoot)\Build\TaskOverrides.Tasks" /> <Import Project="$(MSBuildProjectDirectory)\Analyzer.csproj" /> <PropertyGroup> <PublishDir>$(WebOutputDir)\DASH Query Builder\</PublishDir> <ApplicationVersion>$(MajorMinorVersion).0.0</ApplicationVersion> </PropertyGroup> <Target Name="BeforeResolveReferences"> <Copy SourceFiles="$(MSBuildProjectDirectory)\DASHQueryBuilder.config" DestinationFiles="$(MSBuildProjectDirectory)\app.config" /> </Target> </Project>

Read the article

WPF Xaml Custom Styling Selected Item Style in a ListBox

- by John Batdorf

I have a list box that scrolls images horizontally. I have the following XAML I used blend to create it. It originally had a x:Key on the Style TaregetType line, MSDN said to remove it, as I was getting errors on that. Now I'm getting this error: Error 3 Operation is not valid while ItemsSource is in use. Access and modify elements with ItemsControl.ItemsSource instead. I don't understand how to apply all of this junk that way, I've tried several thing, nothing is working. My goal is to have the selected item's background be white, not blue. Seems like a lot of work for something so small! Thanks. <ListBox ItemsSource="{Binding Source={StaticResource WPFApparelCollection}}" Grid.Row="1" Margin="2,26,2,104" ScrollViewer.VerticalScrollBarVisibility="Hidden" ScrollViewer.HorizontalScrollBarVisibility="Hidden" SelectionMode="Single" x:Name="list1" MouseLeave="List1_MouseLeave" MouseMove="List1_MouseMove" Style="{DynamicResource ListBoxStyle1}" > <Style TargetType="{x:Type ListBoxItem}"> <Setter Property="Background" Value="Transparent"/> <Setter Property="HorizontalContentAlignment" Value="{Binding Path=HorizontalContentAlignment, RelativeSource={RelativeSource AncestorType={x:Type ItemsControl}}}"/> <Setter Property="VerticalContentAlignment" Value="{Binding Path=VerticalContentAlignment, RelativeSource={RelativeSource AncestorType={x:Type ItemsControl}}}"/> <Setter Property="Padding" Value="2,0,0,0"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type ListBoxItem}"> <Border x:Name="Bd" SnapsToDevicePixels="true" Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Padding="{TemplateBinding Padding}"> <ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/> </Border> <ControlTemplate.Triggers> <Trigger Property="IsSelected" Value="true"> <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/> <Setter Property="Background" TargetName="Bd" Value="#FFFFFFFF"/> </Trigger> <MultiTrigger> <MultiTrigger.Conditions> <Condition Property="IsSelected" Value="true"/> <Condition Property="Selector.IsSelectionActive" Value="false"/> </MultiTrigger.Conditions> <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/> <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/> </MultiTrigger> <Trigger Property="IsEnabled" Value="false"> <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> <ListBox.ItemsPanel> <ItemsPanelTemplate> <VirtualizingStackPanel Orientation="Horizontal" IsItemsHost="True" /> </ItemsPanelTemplate> </ListBox.ItemsPanel> <ListBox.ItemTemplate> <DataTemplate> <Image Source="{Binding Image}" /> </DataTemplate> </ListBox.ItemTemplate> </ListBox>

Read the article

Creating a menu using xslt for Umbraco

- by rob_g

I've created a menu in umbraco using XSLT. The menu is using the usual ul and li elements and I'm displaying only the first level of the menu. The aim is to create a menu that expands to show the sub menu when I click a parent node (in the top level). I am after the xslt I would need to expose the sub menu when clicked. I think I would need to make use of ancestor-or-self to detect the current menu and parent menu and display them and also the $currentPage variable. I have the following xslt: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE xsl:stylesheet [ <!ENTITY nbsp " "> ]> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxml="urn:schemas-microsoft-com:xslt" xmlns:umbraco.library="urn:umbraco.library" xmlns:Exslt.ExsltCommon="urn:Exslt.ExsltCommon" xmlns:Exslt.ExsltDatesAndTimes="urn:Exslt.ExsltDatesAndTimes" xmlns:Exslt.ExsltMath="urn:Exslt.ExsltMath" xmlns:Exslt.ExsltRegularExpressions="urn:Exslt.ExsltRegularExpressions" xmlns:Exslt.ExsltStrings="urn:Exslt.ExsltStrings" xmlns:Exslt.ExsltSets="urn:Exslt.ExsltSets" xmlns:tagsLib="urn:tagsLib" xmlns:urlLib="urn:urlLib" exclude-result-prefixes="msxml umbraco.library Exslt.ExsltCommon Exslt.ExsltDatesAndTimes Exslt.ExsltMath Exslt.ExsltRegularExpressions Exslt.ExsltStrings Exslt.ExsltSets tagsLib urlLib "> <xsl:output method="xml" omit-xml-declaration="yes"/> <xsl:param name="currentPage"/> <xsl:template match="/"> <div id="kb-categories"> <h3>Categories</h3> <xsl:call-template name="drawNodes"> <xsl:with-param name="parent" select="$currentPage/ancestor-or-self::node [@level=1]"/> </xsl:call-template> </div> </xsl:template> <xsl:template name="drawNodes"> <xsl:param name="parent"/> <xsl:if test="(umbraco.library:IsProtected($parent/@id, $parent/@path) = 0 or (umbraco.library:IsProtected($parent/@id, $parent/@path) = 1)) and $parent/@level = 1"> <ul class="kb-menuLevel1" > <xsl:for-each select="$parent/node [string(./data [@alias='showInMenu']) = 1]"> <li> <a href="/kb{umbraco.library:NiceUrl(@id)}"> <xsl:value-of select="@nodeName"/> </a> <xsl:variable name="level" select="@level" /> <xsl:if test="(count(./node [string(./data [@alias='showInMenu']) = '1']) > 0)"> <xsl:call-template name="drawNodes"> <xsl:with-param name="parent" select="."/> </xsl:call-template> </xsl:if> </li> </xsl:for-each> </ul> </xsl:if> <xsl:if test="(umbraco.library:IsProtected($parent/@id, $parent/@path) = 0 or (umbraco.library:IsProtected($parent/@id, $parent/@path) = 1)) and $parent/@level > 1"> <ul class="kb-menuLevel{@level}" style="display: none;"> <xsl:for-each select="$parent/node [string(./data [@alias='showInMenu']) = 1]"> <li> <a href="/kb{umbraco.library:NiceUrl(@id)}"> <xsl:value-of select="@nodeName"/> </a> <xsl:variable name="level" select="@level" /> <xsl:if test="(count(./node [string(./data [@alias='showInMenu']) = '1']) > 0)"> <xsl:call-template name="drawNodes"> <xsl:with-param name="parent" select="."/> </xsl:call-template> </xsl:if> </li> </xsl:for-each> </ul> </xsl:if> </xsl:template> </xsl:stylesheet> I suspect this could be improved using apply-templates, but I'm not yet up to speed with that (this being only the second day of my learning xslt). My menu: Item 1 Item 2 Item 3 Item 4 when I click on Item 2 I want to see it's child menu too: Item 1 Item 2 -- Item 2.1 -- Item 2.2 Item 3 Item 4 and so on down the nested menu.

Read the article

Accessing py2exe program over network in Windows 98 throws ImportErrors

- by darvids0n

I'm running a py2exe-compiled python program from one server machine on a number of client machines (mapped to a network drive on every machine, say W:). For Windows XP and later machines, have so far had zero problems with Python picking up W:\python23.dll (yes, I'm using Python 2.3.5 for W98 compatibility and all that). It will then use W:\zlib.pyd to decompress W:\library.zip containing all the .pyc files like os and such, which are then imported and the program runs no problems. The issue I'm getting is on some Windows 98 SE machines (note: SOME Windows 98 SE machines, others seem to work with no apparent issues). What happens is, the program runs from W:, the W:\python23.dll is, I assume, found (since I'm getting Python ImportErrors, we'd need to be able to execute a Python import statement), but a couple of things don't work: 1) If W:\library.zip contains the only copy of the .pyc files, I get ZipImportError: can't decompress data; zlib not available (nonsense, considering W:\zlib.pyd IS available and works fine with the XP and higher machines on the same network). 2) If the .pyc files are actually bundled INSIDE the python exe by py2exe, OR put in the same directory as the .exe, OR put into a named subdirectory which is then set as part of the PYTHONPATH variable (e.g W:\pylib), I get ImportError: no module named os (os is the first module imported, before sys and anything else). Come to think of it, sys.path wouldn't be available to search if os was imported before it maybe? I'll try switching the order of those imports but my question still stands: Why is this a sporadic issue, working on some networks but not on others? And how would I force Python to find the files that are bundled inside the very executable I run? I have immediate access to the working Windows 98 SE machine, but I only get access to the non-working one (a customer of mine) every morning before their store opens. Thanks in advance! EDIT: Okay, big step forward. After debugging with PY2EXE_VERBOSE, the problem occurring on the specific W98SE machine is that it's not using the right path syntax when looking for imports. Firstly, it doesn't seem to read the PYTHONPATH environment variable (there may be a py2exe-specific one I'm not aware of, like PY2EXE_VERBOSE). Secondly, it only looks in one place before giving up (if the files are bundled inside the EXE, it looks there. If not, it looks in library.zip). EDIT 2: In fact, according to this, there is a difference between the sys.path in the Python interpreter and that of Py2exe executables. Specifically, sys.path contains only a single entry: the full pathname of the shared code archive. Blah. No fallbacks? Not even the current working directory? I'd try adding W:\ to PATH, but py2exe doesn't conform to any sort of standards for locating system libraries, so it won't work. Now for the interesting bit. The path it tries to load atexit, os, etc. from is: W:\\library.zip\<module>.<ext> Note the single slash after library.zip, but the double slash after the drive letter (someone correct me if this is intended and should work). It looks like if this is a string literal, then since the slash isn't doubled, it's read as an (invalid) escape sequence and the raw character is printed (giving W:\library.zipos.pyd, W:\library.zipos.dll, ... instead of with a slash); if it is NOT a string literal, the double slash might not be normpath'd automatically (as it should be) and so the double slash confuses the module loader. Like I said, I can't just set PYTHONPATH=W:\\library.zip\\ because it ignores that variable. It may be worth using sys.path.append at the start of my program but hard-coding module paths is an absolute LAST resort, especially since the problem occurs in ONE configuration of an outdated OS. Any ideas? I have one, which is to normpath the sys.path.. pity I need os for that. Another is to just append os.getenv('PATH') or os.getenv('PYTHONPATH') to sys.path... again, needing the os module. The site module also fails to initialise, so I can't use a .pth file. I also recently tried the following code at the start of the program: for pth in sys.path: fErr.write(pth) fErr.write(' to ') pth.replace('\\\\','\\') # Fix Windows 98 pathing issues fErr.write(pth) fErr.write('\n') But it can't load linecache.pyc, or anything else for that matter; it can't actually execute those commands from the looks of things. Is there any way to use built-in functionality which doesn't need linecache to modify the sys.path dynamically? Or am I reduced to hard-coding the correct sys.path?

Read the article

Session caching problem

- by Levani

I have a strange problem with php sessions. I use them for authorization on my site. I store two variables - currently logged in user's id and username in session. When I log in with one username, than log out and log in again with another username the previous user's id is returned using the session variable instead of the current user. The most strange thing is that this happens only when it comes to insert some data into database. When I directly echo this variable the correct id is displayed, but when I insert new record into database this variable sends incorrect id. Here is the php code I use for sending data into database: <?php session_start(); //connect database require_once 'dbc.php'; $authorID = $_SESSION['user_id']; if ( $authorID != 0 ) { $content = htmlentities($_POST["answ_content"],ENT_COMPAT,'UTF-8'); $dro = date('Y-m-d H:i:s'); $qID = $_POST["question_ID"]; $author = 'avtori'; $sql="INSERT INTO comments (comment_ID, comment_post_ID, comment_author, comment_date, comment_content, user_id) VALUES (NULL, '$qID', '$author', '$dro', '$content', '$authorID')"; $result = mysql_query($sql); } else { echo 'error'; } ?> Can anyone please help? Here is the logout function: function logout() { global $db; session_start(); if(isset($_SESSION['user_id']) || isset($_COOKIE['user_id'])) { mysql_query("update `users` set `ckey`= '', `ctime`= '' where `id`='$_SESSION[user_id]' OR `id` = '$_COOKIE[user_id]'") or die(mysql_error()); } /************ Delete the sessions****************/ unset($_SESSION['user_id']); unset($_SESSION['user_name']); unset($_SESSION['user_level']); unset($_SESSION['HTTP_USER_AGENT']); session_unset(); session_destroy(); /* Delete the cookies*******************/ setcookie("user_id", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_name", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_key", '', time()-60*60*24*COOKIE_TIME_OUT, "/"); header("Location: index.php"); } Here is the authentication script: include 'dbc.php'; $err = array(); foreach($_GET as $key => $value) { $get[$key] = filter($value); //get variables are filtered. } if ($_POST['doLogin']=='Login') { foreach($_POST as $key => $value) { $data[$key] = filter($value); // post variables are filtered } $user_email = $data['usr_email']; $pass = $data['pwd']; if (strpos($user_email,'@') === false) { $user_cond = "user_name='$user_email'"; } else { $user_cond = "user_email='$user_email'"; } $result = mysql_query("SELECT `id`,`pwd`,`full_name`,`approved`,`user_level` FROM users WHERE $user_cond AND `banned` = '0' ") or die (mysql_error()); $num = mysql_num_rows($result); // Match row found with more than 1 results - the user is authenticated. if ( $num > 0 ) { list($id,$pwd,$full_name,$approved,$user_level) = mysql_fetch_row($result); if(!$approved) { //$msg = urlencode("Account not activated. Please check your email for activation code"); $err[] = "Account not activated. Please check your email for activation code"; //header("Location: login.php?msg=$msg"); //exit(); } //check against salt if ($pwd === PwdHash($pass,substr($pwd,0,9))) { // this sets session and logs user in session_start(); session_regenerate_id (true); //prevent against session fixation attacks. // this sets variables in the session $_SESSION['user_id']= $id; $_SESSION['user_name'] = $full_name; $_SESSION['user_level'] = $user_level; $_SESSION['HTTP_USER_AGENT'] = md5($_SERVER['HTTP_USER_AGENT']); //update the timestamp and key for cookie $stamp = time(); $ckey = GenKey(); mysql_query("update users set `ctime`='$stamp', `ckey` = '$ckey' where id='$id'") or die(mysql_error()); //set a cookie if(isset($_POST['remember'])){ setcookie("user_id", $_SESSION['user_id'], time()+60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_key", sha1($ckey), time()+60*60*24*COOKIE_TIME_OUT, "/"); setcookie("user_name",$_SESSION['user_name'], time()+60*60*24*COOKIE_TIME_OUT, "/"); } if(empty($err)){ header("Location: myaccount.php"); } } else { //$msg = urlencode("Invalid Login. Please try again with correct user email and password. "); $err[] = "Invalid Login. Please try again with correct user email and password."; //header("Location: login.php?msg=$msg"); } } else { $err[] = "Error - Invalid login. No such user exists"; } }

Read the article

syntax error in sql query?

- by user1550588

I want to create some tables in database so for that i wright some queries to create table. but i got an error "there was a syntax error in your sql statement". I check all my queries but i am not able to find what syntax i wright wrong. here i attached my sql queries please told me what is wrong with queries. Thanks in advance. CREATE TABLE "WATER&SEWAGE" { "CUSTOMER_ID" VARCHAR, "POTABLE_WATER" VARCHAR, "HOT_WATER" VARCHAR, "SAFETY" VARCHAR, "T/P_VALVE+EXT" VARCHAR, "HEATER_TYPE" VARCHAR, "GAS_VENT_CONDITION" VARCHAR, "FIRE_BOX_CONDITION" VARCHAR, "PRESSURE" VARCHAR, "BACK_FLOW" VARCHAR, "PLUMBING_CONDITION" VARCHAR, "CABINET_CONDITION" VARCHAR, "3_COMP_SINK" VARCHAR, "WATER_HEATER" VARCHAR, "CLEAN_OUT_CONDITION" VARCHAR, "FLOOR_DRAIN" VARCHAR, "FLOOR_SINK" VARCHAR, "MAINTANANCE" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "TIME_AND_TETMPERATURE_REL" ("CUSTOMER_ID" INTEGER, "THERMOMTE_AVAILABLE" VARCHAR, "THERMO_TYPE" VARCHAR, "COLD_TEMP" VARCHAR, "FOOD_TYPE1" VARCHAR, "PROPER_COOLING" VARCHAR, "FOOD_TYPE2" VARCHAR, "COMPLIANCE" VARCHAR, "FOOD_TYPE3" VARCHAR, "TPHC" VARCHAR, "HACCP" VARCHAR, "HOT_HOLDING_TEMP" VARCHAR, "FOOD_TYPE4" VARCHAR, "HOT_TEMP" VARCHAR, "FOOD_TYPE5" VARCHAR, "IMPROPER_REHEATING" VARCHAR, "FOOD_TYPE6" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "WRITTEN_PLAN_FILES" VARCHAR, "EMPLOYEE_KNOWLEDGE" VARCHAR, "TIME_KEEPING_METHODS" VARCHAR, "HACCP_METHODS" VARCHAR, "CALIBRATION" VARCHAR, "COOKING_TEMP" VARCHAR, "EQUIP_CONDITION" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PROTECTION_FROM_CONTAMINATION" ("FOOD_ADULTERATION" VARCHAR, "FOOD_SPOILAGE" VARCHAR, "CONTAMINATION" VARCHAR, "FOOD_STORAGE" VARCHAR, "REFRIGRATORS" VARCHAR, "FREEZER" VARCHAR, "FIFO" VARCHAR, "DRY" VARCHAR, "DISHWASHING_CHEMICALS" VARCHAR, "CLEANING" VARCHAR, "SANITIZER" VARCHAR, "SUPPLY_EQUIPMENT" VARCHAR, "PESTICIDES" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR, "CUSTOMER_ID" INTEGER) CREATE TABLE "PHYSICAL_FACILITIES_2" ("CUSTOMER_ID" VARCHAR, "CEILING" VARCHAR, "WINDOWS" VARCHAR, "SPOILS_STORAGE" VARCHAR, "DOORS" VARCHAR, "PERSONAL_LOCKERS" VARCHAR, "FLOORS" VARCHAR, "CONDITION" VARCHAR, "HANDICAP" VARCHAR, "SELF_CLOSING_ROOM" VARCHAR, "TOILETS" VARCHAR, "TOILET_PAPER" VARCHAR, "TOILET_CONDITION" VARCHAR, "VENTILATION_CONDITION" VARCHAR, "MENS" VARCHAR, "MEN'S_VENTILATION" VARCHAR, "MEN'S_FLOOR_DRAWN" VARCHAR, "MEN'S_TOILET_STALLS" VARCHAR, "MEN'S_HAND_SINK" VARCHAR, "MEN'S_TOWELS" VARCHAR, "WOMEN'S" VARCHAR, "WOMEN'S_VENTILATION" VARCHAR, "WOMEN'S_FLOOR_DRAWN" VARCHAR, "WOMEN'S_TOILET_STALLS" VARCHAR, "WOMEN'S_HAND_SINK" VARCHAR, "WOMEN'S_TOWELS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PHYSICAL_FACILITIES_1" ("CUSTOMER_ID" VARCHAR, "LIGHTNING" VARCHAR, "KITCHEN" VARCHAR, "STORAGE" VARCHAR, "REFRIGRATION" VARCHAR, "JANITORIAL" VARCHAR, "INTERIOR" VARCHAR, "FIXTURE" VARCHAR, "FOOTCANDLES_1" VARCHAR, "FOOTCANDLES_2" VARCHAR, "FOOTCANDLES_3" VARCHAR, "FOOTCANDLES_4" VARCHAR, "FOOTCANDLES_5" VARCHAR, "EXTERIOR" VARCHAR, "WINDOWS" VARCHAR, "GLASS" VARCHAR, "SCREEN" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PEST_CONTROL" ("CUSTOMER_ID" VARCHAR, "WALL/CEILING_PIPES" VARCHAR, "SANITATION" VARCHAR, "DOORS" VARCHAR, "SELF_CLOSING" VARCHAR, "RODENT_PROOF" VARCHAR, "VERMIN_PROOFING" VARCHAR, "FOUNDATION" VARCHAR, "ATTIC_VENTS" VARCHAR, "WINDOWS" VARCHAR, "TYPE_SCREENS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "GENERAL_FOOD_SAFETY_REQ" ("CUSTOMER_ID" VARCHAR, "APPROVED_METHODS" VARCHAR, "DEFROST" VARCHAR, "FROZEN_FOOD" VARCHAR, "FOOD_WASHING" VARCHAR, "PRODUCE_1" VARCHAR, "FRUITS" VARCHAR, "GRAINS" VARCHAR, "VEGETABLES" VARCHAR, "SEPERATE_FROM_CONT" VARCHAR, "RAW" VARCHAR, "PRODUCE_2" VARCHAR, "STORED_BULK" VARCHAR, "STORAGE" VARCHAR, "FIFO" VARCHAR, "REFRIGRATAION" VARCHAR, "STORAGE_TEMP" VARCHAR, "HUMIDITY" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_SAFETY_CERTIFICATION" ("CUSTOMER_ID" INTEGER,"OWNER" VARCHAR,"MANAGER" VARCHAR,"EMPLOYEE" VARCHAR,"NAME1" VARCHAR,"NAT'L_REGISTRY1" VARCHAR,"PROMETRIC1" VARCHAR,"SERVESAFE1" VARCHAR,"EXPIRATION1" VARCHAR,"NAME2" VARCHAR,"NAT'L_REGISTRY2" VARCHAR,"PROMETRIC2" VARCHAR,"SERVESAFE2" VARCHAR,"EXPIRATION2" VARCHAR,"COMMENTS" VARCHAR,"FOOD_TEMP" VARCHAR,"DISHWASHER" VARCHAR,"DANGER_ZONE" VARCHAR,"COOLING_FOODS" VARCHAR,"THAWING" VARCHAR,"REHEATING" VARCHAR,"THERMOMETERS" VARCHAR,"FIFO" VARCHAR,"HANDWASH" VARCHAR,"COOKING_TEMP" VARCHAR,"FOOD_POISONING_TYPES" VARCHAR,"EVEDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_FROM_APPROVED_SOURCES" ("CUSTOMER_ID" VARCHAR, "RECEIPTS" VARCHAR, "DELIVERY_DOOR" VARCHAR, "AIR_CURTAIN" VARCHAR, "VELOCITY" VARCHAR, "OFF_LOAD" VARCHAR, "INSPECTS" VARCHAR, "RODENTS" VARCHAR, "WARNING" VARCHAR, "SHELL_FISH" VARCHAR, "GULF_OYSTER" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTO" VARCHAR) CREATE TABLE "FOOD_FACILITY_SITE_FACTS" ("CUSTOMER_ID" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL UNIQUE,"DBA" VARCHAR,"DISTRICT" VARCHAR,"CITY" VARCHAR,"ZIPCODE" VARCHAR,"ADDRESS" VARCHAR,"SEAT_NO" VARCHAR,"PHONE_NO" VARCHAR,"OWNER" VARCHAR,"PERSON_IN_CHARGE" VARCHAR,"WEBSITE" VARCHAR,"EMAIL" VARCHAR,"FACILITY_TYPE" VARCHAR,"SQ_FOOTAGE" VARCHAR,"NO_OF_SEATS" VARCHAR,"ALCOHOL_SALES" VARCHAR,"LTD_PREP" VARCHAR,"BUSINESS_LICENCE_NO" VARCHAR,"EXPIRATION" VARCHAR,"COMMENTS" VARCHAR,"EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_DISPLAY_SELF_SERVICE" ("CUSTOMER_ID" VARCHAR, "SELF_SERVICE" VARCHAR, "LIDS" VARCHAR, "UTENSILS" VARCHAR, "HOW_OFTEN_CHANGED" VARCHAR, "SCOOP" VARCHAR, "SNEEZ_GUARD" VARCHAR, "DISHES" VARCHAR, "CROSS" VARCHAR, "SENITATION" VARCHAR, "MAINTANANCE" VARCHAR, "MECHANICAL_CONDITION" VARCHAR, "SERVICE_OF_UTENSIL" VARCHAR, "TIME" VARCHAR, "PRPER_FOOD_LABELING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EQUIPMENT/UTENSILS/LINES" ("CUSTOMER_ID" VARCHAR, "STORED_DISHES" VARCHAR, "CUPS" VARCHAR, "DAMAGED_DISHES" VARCHAR, "UTENSILS" VARCHAR, "LINES" VARCHAR, "COOLING_EQUIPMENT" VARCHAR, "COOK_WARE_STORAGE" VARCHAR, "CONDITION" VARCHAR, "STORAGE_LOCATION" VARCHAR, "NAPKINS" VARCHAR, "SANITATION" VARCHAR, "ADEQUATE_CAPACITY" VARCHAR, "HAZARDS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EMPLOYEE_HEALTH_AND_HYGENE" ("CSTOMER_ID" INTEGER, "COMUNICABLE_DIESEASE" VARCHAR, "WIPING_BAGS" VARCHAR, "DISCHARGE" VARCHAR, "LOCKERS" VARCHAR, "PROPER_HAND_WASH" VARCHAR, "RESTROOM_CONDITION" VARCHAR, "HANDWASH_STATION" VARCHAR, "HAIR_RESTRAINT" VARCHAR, "GLOVES_USED" VARCHAR, "WOUND_CARE" VARCHAR, "FOOD_SAMPLE_TESTING" VARCHAR, "GARMENT_CONDITION" VARCHAR, "HEALTH" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "DISH&WARE_WASHING" ("CUSTOMER_ID" INTEGER, "TYPE_OF_COMPARTMENT_SINK" VARCHAR, "PLUMBING_ISSUE1" VARCHAR, "QUATERNARY_AMMONIA" VARCHAR, "IODINE" VARCHAR, "HOT_WTR_SANIT_TEMP" VARCHAR, "PLUMBING_ISSUE2" VARCHAR, "HOT_WATER" VARCHAR, "TEMP" VARCHAR, "DISHWASHER_TYPE" VARCHAR, "WAQLL_CONDITION" VARCHAR, "SANITIZER_LEVELS" VARCHAR, "CHLORINE" VARCHAR, "SINK_OR_DISHWASHER" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "CORRECTIVE_ACTIONS" ("CUSTOMER_ID" VARCHAR, "CORRECTIVE_ACTIONS" VARCHAR) CREATE TABLE "CONSUMER_ADVISORY" ("CUSTOMER_ID" VARCHAR, "TRUTH_IN_MENU" VARCHAR, "MAJOR_CHAIN" VARCHAR, "TRANS_FAT" VARCHAR, "SCHOOL" VARCHAR, "PROHIBITED" VARCHAR, "CALORIES" VARCHAR, "COMMENTS" VARCHAR, "EVEDINCE_PHOTOS" VARCHAR) CREATE TABLE "COMPLAINS&ENFORCEMENTS" ("CUSTOMER_ID" VARCHAR, "PLAN_SUBMITTED" VARCHAR, "APPROVEL" VARCHAR, "CERTIFICATE_OF_OCCU" VARCHAR, "PRIOR_INSPEK_REPORT" VARCHAR, "LAST_INSPECTION_DATE" VARCHAR, "PERMIT_STATUS" VARCHAR, "POSTED" VARCHAR, "EXPIRATION" VARCHAR, "PERMIT_DISPLAYED" VARCHAR, "INSPECTION_REPORT_POSTING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR)

Read the article

Mysql 100% CPU + Slow query

- by felipeclopes

Read the article

Dynamic scoping in Clojure?

- by j-g-faustus

Hi, I'm looking for an idiomatic way to get dynamically scoped variables in Clojure (or a similar effect) for use in templates and such. Here is an example problem using a lookup table to translate tag attributes from some non-HTML format to HTML, where the table needs access to a set of variables supplied from elsewhere: (def *attr-table* ; Key: [attr-key tag-name] or [boolean-function] ; Value: [attr-key attr-value] (empty array to ignore) ; Context: Variables "tagname", "akey", "aval" '( ; translate :LINK attribute in <a> to :href [:LINK "a"] [:href aval] ; translate :LINK attribute in <img> to :src [:LINK "img"] [:src aval] ; throw exception if :LINK attribute in any other tag [:LINK] (throw (RuntimeException. (str "No match for " tagname))) ; ... more rules ; ignore string keys, used for internal bookkeeping [(string? akey)] [] )) ; ignore I want to be able to evaluate the rules (left hand side) as well as the result (right hand side), and need some way to put the variables in scope at the location where the table is evaluated. I also want to keep the lookup and evaluation logic independent of any particular table or set of variables. I suppose there are similar issues involved in templates (for example for dynamic HTML), where you don't want to rewrite the template processing logic every time someone puts a new variable in a template. Here is one approach using global variables and bindings. I have included some logic for the table lookup: ;; Generic code, works with any table on the same format. (defn rule-match? [rule-val test-val] "true if a single rule matches a single argument value" (cond (not (coll? rule-val)) (= rule-val test-val) ; plain value (list? rule-val) (eval rule-val) ; function call :else false )) (defn rule-lookup [test-val rule-table] "looks up rule match for test-val. Returns result or nil." (loop [rules (partition 2 rule-table)] (when-not (empty? rules) (let [[select result] (first rules)] (if (every? #(boolean %) (map rule-match? select test-val)) (eval result) ; evaluate and return result (recur (rest rules)) ))))) ;; Code specific to *attr-table* (def tagname) ; need these globals for the binding in html-attr (def akey) (def aval) (defn html-attr [tagname h-attr] "converts to html attributes" (apply hash-map (flatten (map (fn [[k v :as kv]] (binding [tagname tagname akey k aval v] (or (rule-lookup [k tagname] *attr-table*) kv))) h-attr )))) (defn test-attr [] "test conversion" (prn "a" (html-attr "a" {:LINK "www.google.com" "internal" 42 :title "A link" })) (prn "img" (html-attr "img" {:LINK "logo.png" }))) user=> (test-attr) "a" {:href "www.google.com", :title "A link"} "img" {:src "logo.png"} This is nice in that the lookup logic is independent of the table, so it can be reused with other tables and different variables. (Plus of course that the general table approach is about a quarter of the size of the code I had when I did the translations "by hand" in a giant cond.) It is not so nice in that I need to declare every variable as a global for the binding to work. Here is another approach using a "semi-macro", a function with a syntax-quoted return value, that doesn't need globals: (defn attr-table [tagname akey aval] `( [:LINK "a"] [:href ~aval] [:LINK "img"] [:src ~aval] [:LINK] (throw (RuntimeException. (str "No match for " tagname))) ; ... more rules [(string? ~akey)] [] ))) Only a couple of changes are needed to the rest of the code: In rule-match?, when syntax-quoted the function call is no longer a list: - (list? rule-val) (eval rule-val) + (seq? rule-val) (eval rule-val) In html-attr: - (binding [tagname tagname akey k aval v] - (or (rule-lookup [k tagname] *attr-table*) kv))) + (or (rule-lookup [k tagname] (attr-table tagname k v)) kv))) And we get the same result without globals. (And without dynamic scoping.) Are there other alternatives to pass along sets of variable bindings declared elsewhere, without the globals required by Clojure's binding? Is there an idiomatic way of doing it, like Ruby's binding or Javascript's function.apply(context)?

Read the article

Make wix installation set upgrade to same folder

- by Magnus Akselvoll

How can I make a major upgrade to an installation set (MSI) built with Wix install into the same folder as the original installation? The installation is correctly detected as an upgrade, but the directory selection screen is still shown and with the default value (not necessarily the current installation folder). Do I have to do manual work like saving the installation folder in a registry key upon first installing and then read this key upon upgrade? If so, is there any example? Or is there some easier way to achieve this in MSI / Wix? As reference I paste in my current Wix file below: <?xml version="1.0" encoding="utf-8"?>  <Package Keywords="Installer" Id="e85e6190-1cd4-49f5-8924-9da5fcb8aee8" Description="Installs MyCompany Integration Framework 1.0.0" Comments="Installs MyCompany Integration Framework 1.0.0" InstallerVersion="100" Compressed="yes" /> <Upgrade Id='9071eacc-9b5a-48e3-bb90-8064d2b2c45d'> <UpgradeVersion Property="PATCHFOUND" OnlyDetect="no" Minimum="0.0.1" IncludeMinimum="yes" Maximum="1.0.0" IncludeMaximum="yes"/> </Upgrade>  <Media Id="1" Cabinet="MyCompany.cab" EmbedCab="yes" />  <Condition Message='This setup requires the .NET Framework 2 or higher.'> <![CDATA[MsiNetAssemblySupport >= "2.0.50727"]]> </Condition> <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="MyCompany" Name="MyCompany"> <Directory Id="INSTALLDIR" Name="Integrat" LongName="MyCompany Integration Framework"> <Component Id="MyCompanyDllComponent" Guid="4f362043-03a0-472d-a84f-896522ce7d2b" DiskId="1"> <File Id="MyCompanyIntegrationDll" Name="IbIntegr.dll" src="..\Build\MyCompany.Integration.dll" Vital="yes" LongName="MyCompany.Integration.dll" /> <File Id="MyCompanyServiceModelDll" Name="IbSerMod.dll" src="..\Build\MyCompany.ServiceModel.dll" Vital="yes" LongName="MyCompany.ServiceModel.dll" /> </Component>  </Directory> </Directory> </Directory> <Feature Id="MyCompanyProductFeature" Title='MyCompany Integration Framework' Description='The complete package' Display='expand' Level="1" InstallDefault='local' ConfigurableDirectory="INSTALLDIR"> <ComponentRef Id="MyCompanyDllComponent" /> </Feature>  <Property Id="finaltaskexe" Value="MyCompany.Integration.Host.exe" /> <Property Id="WIXUI_INSTALLDIR" Value="INSTALLDIR" /> <InstallExecuteSequence>  <Custom Action='PropertyAssign' After='InstallFinalize'>NOT Installed AND NOT PATCHFOUND</Custom> <Custom Action='LaunchFile' After='InstallFinalize'>NOT Installed AND NOT PATCHFOUND</Custom> <RemoveExistingProducts Before='CostInitialize' /> </InstallExecuteSequence>  <CustomAction Id='PropertyAssign' Property='PathProperty' Value='[INSTALLDIR][finaltaskexe]' /> <CustomAction Id='LaunchFile' Property='PathProperty' ExeCommand='/INITIALCONFIG "[INSTALLDIR]parameters.xml"' Return='asyncNoWait' />  <UIRef Id="WixUI_InstallDir" /> <UIRef Id="WixUI_ErrorProgressText" />

Read the article

Writing an optimised and efficient search engine with mySQL and ColdFusion

- by Mel

I have a search page with the following scenarios listed below. I was told there was a better way to do it, but not how, and that I am using too many if statements, and that it's prone to causing an error through url manipulation: Search.cfm will processes a search made from a search bar present on all pages, with one search input (titleName). If search.cfm is accessed manually (through URL not through using the simple search bar on all pages) it displays an advanced search form with three inputs (titleName, genreID, platformID) or it evaluates searchResponse variable and decides what to do. If simple search query is blank, has no results, or less than 3 characters it displays an error If advanced search query is blank, has no results, or less than 3 characters it displays an error If any successful search returns results, they come back normally. The top-of-page logic is as follows:  <cfparam name="variables.searchResponse" default="">  <cfif IsDefined("Form.simpleSearch") AND Len(Trim(Form.titleName)) LTE 2> <cfset variables.searchResponse = "invalidString"> <cfelseif IsDefined("Form.simpleSearch") AND Len(Trim(Form.titleName)) GTE 3>  <cfinvoke component="myComponent" method="simpleSearch" searchString="#Form.titleName#" returnvariable="simpleSearchResult"> <cfset variables.searchResponse = "simpleSearchResult"> </cfif>  <cfif IsDefined("variables.simpleSearchResult") AND simpleSearchResult.RecordCount IS 0> <cfset variables.searchResponse = "noResult"> </cfif>  <cfif IsDefined("Form.AdvancedSearch") AND Len(Trim(Form.titleName)) LTE 2> <cfset variables.searchResponse = "invalidString"> <cfelseif IsDefined("Form.advancedSearch") AND Len(Trim(Form.titleName)) GTE 2>  <cfinvoke component="myComponent" method="advancedSearch" returnvariable="advancedSearchResult" titleName="#Form.titleName#" genreID="#Form.genreID#" platformID="#Form.platformID#"> <cfset variables.searchResponse = "advancedSearchResult"> </cfif>  <cfif IsDefined("variables.advancedSearchResult") AND advancedSearchResult.RecordCount IS 0> <cfset variables.searchResponse = "noResult"> </cfif> I'm using the searchResponse variable to decide what the the page displays, based on the following scenarios:  <form name="simpleSearch" action="search.cfm" method="post"> <input type="hidden" name="simpleSearch" /> <input type="text" name="titleName" /> <input type="button" value="Search" onclick="form.submit()" /> </form>  <cfif searchResponse IS ""> <h1>Advanced Search</h1>  <form name="advancedSearch" action="search.cfm" method="post"> <input type="hidden" name="advancedSearch" /> <input type="text" name="titleName" /> <input type="text" name="genreID" /> <input type="text" name="platformID" /> <input type="button" value="Search" onclick="form.submit()" /> </form> </cfif>  <cfif searchResponse IS "invalidString"> <cfoutput> <h1>INVALID SEARCH</h1> </cfoutput> </cfif>  <cfif searchResponse IS "noResult"> <cfoutput> <h1>NO RESULT FOUND</h1> </cfoutput> </cfif>  <cfif searchResponse IS "simpleSearchResult"> <cfoutput> <h1>Search Results</h1> </cfoutput> <cfoutput query="simpleSearchResult">  </cfoutput> </cfif>  <cfif searchResponse IS "advancedSearchResult"> <cfoutput> <h1>Search Results</h1> <p>Your search for "#Form.titleName#" returned #advancedSearchResult.RecordCount# result(s).</p> </cfoutput> <cfoutput query="advancedSearchResult">  </cfoutput> </cfif> Is my logic a) not efficient because my if statements/is there a better way to do this? And b) Can you see any scenarios where my code can break? I've tested it but I have not been able to find any issues with it. And I have no way of measuring performance. Any thoughts and ideas would be greatly appreciated. Many thanks

Read the article

Haskell: monadic takeWhile?

- by Mark Rushakoff

I have some functions written in C that I call from Haskell. These functions return IO (CInt). Sometimes I want to run all of the functions regardless of what any of them return, and this is easy. For sake of example code, this is the general idea of what's happening currently: Prelude> let f x = print x >> return x Prelude> mapM_ f [0..5] 0 1 2 3 4 5 Prelude> I get my desired side effects, and I don't care about the results. But now I need to stop execution immediately after the first item that doesn't return my desired result. Let's say a return value of 4 or higher requires execution to stop - then what I want to do is this: Prelude> takeWhile (<4) $ mapM f [0..5] Which gives me this error: <interactive:1:22: Couldn't match expected type `[b]' against inferred type `IO a' In the first argument of `mapM', namely `f' In the second argument of `($)', namely `mapM f ([0 .. 5])' In the expression: takeWhile (< 4) $ mapM f ([0 .. 5]) And that makes sense to me - the result is still contained in the IO monad, and I can't just compare two values contained in the IO monad. I know this is precisely the purpose of monads -- chaining results together and discarding operations when a certain condition is met -- but is there an easy way to "wrap up" the IO monad in this case to stop executing the chain upon a condition of my choosing, without writing an instance of MonadPlus? Can I just "unlift" the values from f, for the purposes of the takeWhile? Is this a solution where functors fit? Functors haven't "clicked" with me yet, but I sort of have the impression that this might be a good situation to use them. Update: @sth has the closest answer to what I want - in fact, that's almost exactly what I was going for, but I'd still like to see whether there is a standard solution that isn't explicitly recursive -- this is Haskell, after all! Looking back on how I worded my question, now I can see that I wasn't clear enough about my desired behavior. The f function I used above for an example was merely an example. The real functions are written in C and used exclusively for their side effects. I can't use @Tom's suggestion of mapM_ f (takeWhile (<4) [0..5]) because I have no idea whether any input will really result in success or failure until executed. I don't actually care about the returned list, either -- I just want to call the C functions until either the list is exhausted or the first C function returns a failure code. In C-style pseudocode, my behavior would be: do { result = function_with_side_effects(input_list[index++]); } while (result == success && index < max_index); So again, @sth's answer performs the exact behavior that I want, except that the results may (should?) be discarded. A dropWhileM_ function would be equivalent for my purposes. Why isn't there a function like that or takeWhileM_ in Control.Monad? I see that there was a similar discussion on a mailing list, but it appears that nothing has come of that.

Read the article

Use of select or multithread for almost 80 or more clients?

- by Tushar Goel

I am working on one project in which i need to read from 80 or more clients and then write their o/p into a file continuously and then read these new data for another task. My question is what should i use select or multithreading? Also I tried to use multi threading using read/fgets and write/fputs call but as they are blocking calls and one operation can be performed at one time so it is not feasible. Any idea is much appreciated. update 1: I have tried to implement the same using condition variable. I able to achieve this but it is writing and reading one at a time.When another client tried to write then it cannot able to write unless i quit from the 1st thread. I do not understand this. This should work now. What mistake i am doing? Update 2: Thanks all .. I am able to succeeded to get this model implemented using mutex condition variable. updated Code is as below: **header file******* char *mailbox ; pthread_mutex_t lock = PTHREAD_MUTEX_INITIALIZER ; pthread_cond_t writer = PTHREAD_COND_INITIALIZER; int main(int argc,char *argv[]) { pthread_t t1 , t2; pthread_attr_t attr; int fd, sock , *newfd; struct sockaddr_in cliaddr; socklen_t clilen; void *read_file(); void *update_file(); //making a server socket if((fd=make_server(atoi(argv[1])))==-1) oops("Unable to make server",1) //detaching threads pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED); ///opening thread for reading pthread_create(&t2,&attr,read_file,NULL); while(1) { clilen = sizeof(cliaddr); //accepting request sock=accept(fd,(struct sockaddr *)&cliaddr,&clilen); //error comparison against failire of request and INT if(sock==-1 && errno != EINTR) oops("accept",2) else if ( sock ==-1 && errno == EINTR) oops("Pressed INT",3) newfd = (int *)malloc(sizeof(int)); *newfd = sock; //creating thread per request pthread_create(&t1,&attr,update_file,(void *)newfd); } free(newfd); return 0; } void *read_file(void *m) { pthread_mutex_lock(&lock); while(1) { printf("Waiting for lock.\n"); pthread_cond_wait(&writer,&lock); printf("I am reading here.\n"); printf("%s",mailbox); mailbox = NULL ; pthread_cond_signal(&writer); } } void *update_file(int *m) { int sock = *m; int fs ; int nread; char buffer[BUFSIZ] ; if((fs=open("database.txt",O_RDWR))==-1) oops("Unable to open file",4) while(1) { pthread_mutex_lock(&lock); write(1,"Waiting to get writer lock.\n",29); if(mailbox != NULL) pthread_cond_wait(&writer,&lock); lseek(fs,0,SEEK_END); printf("Reading from socket.\n"); nread=read(sock,buffer,BUFSIZ); printf("Writing in file.\n"); write(fs,buffer,nread); mailbox = buffer ; pthread_cond_signal(&writer); pthread_mutex_unlock(&lock); } close(fs); }

Read the article

XMLNodes being appended to an XMLNode are "undefined"? Actionscript 2.0 is being unkind

- by DigitalMercenary

If anyone can offer an explanation for this one, I'd LOVE to see it! I was required to append a legacy application to display 20 random questions from an XML data source, as opposed to the total of 70 questions that are part of the original XML. No big deal, right? WRONG! I got it to work just fine in the end, but it's a total HACK! For some reason, some of the nodes that I am appending to a dynamically generated XML document are being returned as "undefined". I kept getting between 16 and 20 questions to render until I modified my iteration from a 'for' loop to a 'do while' loop with the appropriate number of XMLNodes as the condition of the 'do while' loop. Can anyone offer an explanation? Below is the code, with some notes for the reader : function editXML(xml:XML):XML { var node:XMLNode = xml.firstChild; var newNode:XMLNode = new XMLNode(); var nodeArray:Array = new Array(); var usedNodes:Array = new Array(); var totalNodes:Number = node.lastChild.childNodes.length - 1; var nextNode:Number; var returnNode:XMLNode = new XMLNode(); var tempNode:XMLNode; var buildNode:XMLNode; var addNode:Boolean = true; var tempXML:XML = new XML(); var pagesNode:XMLNode = tempXML.createElement("pages"); tempXML.appendChild(pagesNode); tempXML.appendChild(node.childNodes[0]); tempXML.appendChild(node.childNodes[1]); tempXML.appendChild(node.childNodes[2]); var questionsNode:XMLNode = tempXML.createElement("pages"); tempXML.firstChild.appendChild(questionsNode); do { nextNode = Math.floor(Math.random()*totalNodes); **//random number to represent random node** //trace(nextNode + " nextNode"); **//check usedNodes Array to look for node.childNodes[nextNode]. If it already exists, skip and reloop.** trace(node.childNodes[1].childNodes[nextNode] + " : pre building Node " + totalNodes); if(usedNodes.length == 0) { buildNode = new XMLNode(); buildNode.nodeName = node.childNodes[1].childNodes[nextNode].nodeName; buildNode.nodeValue = node.childNodes[1].childNodes[nextNode].nodeValue; tempXML.firstChild.lastChild.appendChild(node.childNodes[1].childNodes[nextNode]) usedNodes.push(node.childNodes[1].childNodes[nextNode]); nodeArray.push(node.childNodes[1].childNodes[nextNode]); trace("adding first node : " + nodeArray.length); addNode = false; } else { for(var j:Number = 0; j < usedNodes.length; j++) { if(usedNodes[j] == node.childNodes[1].childNodes[nextNode]) { addNode = false; trace("skipping node : " + nodeArray.length); } } } **//if node not in usedNodes, add node to XML** if(addNode) { trace(node.childNodes[1].childNodes[nextNode] + " : building Node"); **//This trace statement produced a valid node** tempXML.firstChild.lastChild.appendChild(node.childNodes[1].childNodes[nextNode]); **//Before modifying the code from adding nodes to the xml from an Array called 'nodeArray' in a for loop to adding nodes directly to the xml in a do while loop with the length of the xml node used to retrieve data for the questions as the condition, I was not always getting 20 questions. Some of the nodes were being rendered as 'undefined' and not appended to the xml, even though they were traced and proven valid before the attemp to append them to the xml was made** usedNodes.push(node.childNodes[1].childNodes[nextNode]); } addNode = true; } while(tempXML.firstChild.lastChild.childNodes.length <= 19); trace(tempXML.firstChild.lastChild.childNodes.length + " final nodes Length"); courseXML = tempXML; //removes the old question list of 70 and replaces it with the new question list of 20. Question list is the last node. return tempXML; } If I had my choice, I would have rebuilt the whole application in Flex with AS3. I didn't have that choice. If anyone can explain this mystery, PLEASE DO! Thank you in advance!

Read the article

SQLAuthority News – A Successful Performance Tuning Seminar at Pune – Dec 4-5, 2010

- by pinaldave

This is report to my third of very successful seminar event on SQL Server Performance Tuning. SQL Server Performance Tuning Seminar in Colombo was oversubscribed with total of 35 attendees. You can read the details over here SQLAuthority News – SQL Server Performance Optimizations Seminar – Grand Success – Colombo, Sri Lanka – Oct 4 – 5, 2010. SQL Server Performance Tuning Seminar in Hyderabad was oversubscribed with total of 25 attendees. You can read the details over here SQL SERVER – A Successful Performance Tuning Seminar – Hyderabad – Nov 27-28, 2010. The same Seminar was offered in Pune on December 4,-5, 2010. We had another successful seminar with lots of performance talk. This seminar was attended by 30 attendees. The best part of the seminar was that along with the our agenda, we have talked about following very interesting concepts. Deadlocks Detection and Removal Dynamic SQL and Inline Code SQL Optimizations Multiple OR conditions and performance tuning Dynamic Search Condition Building and Improvement Memory Cache and Improvement Bottleneck Detections – Memory, CPU and IO Beginning Performance Tuning on Production Parametrization Improving already Super Fast Queries Convenience vs. Performance Proper way to create Indexes Hints and Disadvantages I had great time doing the seminar and sharing my performance tricks with all. The highlight of this seminar was I have explained the attendees, how I begin doing performance tuning when I go for Performance Tuning Consultations. Pinal Dave at SQL Performance Tuning Seminar SQL Server Performance Tuning Seminar Pinal Dave at SQL Performance Tuning Seminar Pinal Dave at SQL Performance Tuning Seminar SQL Server Performance Tuning Seminar SQL Server Performance Tuning Seminar This seminar series are 100% demo oriented and no usual PowerPoint talk. They are created from my experiences of various organizations for performance tuning. I am not planning any more seminar this year as it was great but I am booked currently for next 60 days at various performance tuning engagements. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Technology

Read the article

SQL SERVER – Index Created on View not Used Often – Limitation of the View 12

- by pinaldave

I have previously written on the subject SQL SERVER – The Limitations of the Views – Eleven and more…. This was indeed a very popular series and I had received lots of feedback on that topic. Today we are going to discuss something very interesting as well. During my recent performance tuning seminar in Hyderabad, I presented on the subject of Views. During the seminar, one of the attendees asked a question: We create a table and create a View on the top of it. On the same view, if we create Index, when querying View, will that index be used? The answer is NOT Always! (There is only one specific condition when it will be used. We will write about that later in the next post). Let us see the test case for the same. In our script we will do following: USE tempdb GO IF EXISTS (SELECT * FROM sys.views WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[SampleView]')) DROP VIEW [dbo].[SampleView] GO IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[mySampleTable]') AND TYPE IN (N'U')) DROP TABLE [dbo].[mySampleTable] GO -- Create SampleTable CREATE TABLE mySampleTable (ID1 INT, ID2 INT, SomeData VARCHAR(100)) INSERT INTO mySampleTable (ID1,ID2,SomeData) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY o1.name), ROW_NUMBER() OVER (ORDER BY o2.name), o2.name FROM sys.all_objects o1 CROSS JOIN sys.all_objects o2 GO -- Create View CREATE VIEW SampleView WITH SCHEMABINDING AS SELECT ID1,ID2,SomeData FROM dbo.mySampleTable GO -- Create Index on View CREATE UNIQUE CLUSTERED INDEX [IX_ViewSample] ON [dbo].[SampleView] ( ID2 ASC ) GO -- Select from view SELECT ID1,ID2,SomeData FROM SampleView GO Let us check the execution plan for the last SELECT statement. You can see from the execution plan. That even though we are querying View and the View has index, it is not really using that index. In the next post, we will see the significance of this View and where it can be helpful. Meanwhile, I encourage you to read my View series: SQL SERVER – The Limitations of the Views – Eleven and more…. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Training, SQL View, T SQL, Technology

Read the article

SQL SERVER – Solution – Challenge – Puzzle – Usage of FAST Hint

- by pinaldave

Earlier I had posted quick puzzle and I had received wonderful response to the same from Brad Schulz. Today we will go over the solution. The puzzle was posted here: SQL SERVER – Challenge – Puzzle – Usage of FAST Hint The question was in what condition the hint FAST will be useful. In the response to this puzzle blog post here is what SQL Server Expert Brad Schulz has pointed me to his blog post where he explain how FAST hint can be useful. I strongly recommend to read his blog post over here. With the permission of the Brad, I am reproducing following queries here. He has come up with example where FAST hint improves the performance. USE AdventureWorks GO DECLARE @DesiredDateAtMidnight DATETIME = '20010709' DECLARE @NextDateAtMidnight DATETIME = DATEADD(DAY,1,@DesiredDateAtMidnight) -- Query without FAST SELECT OrderID=h.SalesOrderID ,h.OrderDate ,h.TerritoryID ,TerritoryName=t.Name ,c.CardType ,c.CardNumber ,CardExpire=RIGHT(STR(100+ExpMonth),2)+'/'+STR(ExpYear,4) ,h.TotalDue FROM Sales.SalesOrderHeader h LEFT JOIN Sales.SalesTerritory t ON h.TerritoryID=t.TerritoryID LEFT JOIN Sales.CreditCard c ON h.CreditCardID=c.CreditCardID WHERE OrderDate>=@DesiredDateAtMidnight AND OrderDate<@NextDateAtMidnight ORDER BY h.SalesOrderID; -- Query with FAST(10) SELECT OrderID=h.SalesOrderID ,h.OrderDate ,h.TerritoryID ,TerritoryName=t.Name ,c.CardType ,c.CardNumber ,CardExpire=RIGHT(STR(100+ExpMonth),2)+'/'+STR(ExpYear,4) ,h.TotalDue FROM Sales.SalesOrderHeader h LEFT JOIN Sales.SalesTerritory t ON h.TerritoryID=t.TerritoryID LEFT JOIN Sales.CreditCard c ON h.CreditCardID=c.CreditCardID WHERE OrderDate>=@DesiredDateAtMidnight AND OrderDate<@NextDateAtMidnight ORDER BY h.SalesOrderID OPTION(FAST 10) Now when you check the execution plan for the same, you will find following visible difference. You will find query with FAST returns results with much lower cost. Thank you Brad for excellent post and teaching us something. I request all of you to read original blog post written by Brad for much more information. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

How to Use USER_DEFINED Activity in OWB Process Flow

- by Jinggen He

Process Flow is a very important component of Oracle Warehouse Builder. With Process Flow, we can create and control the ETL process by setting all kinds of activities in a well-constructed flow. In Oracle Warehouse Builder 11gR2, there are 28 kinds of activities, which fall into three categories: Control activities, OWB specific activities and Utility activities. For more information about Process Flow activities, please refer to OWB online doc. Most of those activities are pre-defined for some specific use. For example, the Mapping activity allows execution an OWB mapping in Process Flow and the FTP activity allows an interaction between the local host and a remote FTP server. Besides those activities for specific purposes, the User Defined activity enables you to incorporate into a Process Flow an activity that is not defined within Warehouse Builder. So the User Defined activity brings flexibility and extensibility to Process Flow. In this article, we will take an amazing tour of using the User Defined activity. Let's start. Enable execution of User Defined activity Let's start this section from creating a very simple Process Flow, which contains a Start activity, a User Defined activity and an End Success activity. Leave all parameters of activity USER_DEFINED unchanged except that we enter /tmp/test.sh into the Value column of the COMMAND parameter. Then let's create the shell script test.sh in /tmp directory. Here is the content of /tmp/test.sh (this article is demonstrating a scenario in Linux system, and /tmp/test.sh is a Bash shell script): echo Hello World! > /tmp/test.txt Note: don't forget to grant the execution privilege on /tmp/test.sh to OS Oracle user. For simplicity, we just use the following command. chmod +x /tmp/test.sh OK, it's so simple that we’ve almost done it. Now deploy the Process Flow and run it. For a newly installed OWB, we will come across an error saying "RPE-02248: For security reasons, activity operator Shell has been disabled by the DBA". See below. That's because, by default, the User Defined activity is DISABLED. Configuration about this can be found in <ORACLE_HOME>/owb/bin/admin/Runtime.properties: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint=DISABLED The property can be set to three different values: NATIVE_JAVA, SCHEDULER and DISBALED. Where NATIVE_JAVA uses the Java 'Runtime.exec' interface, SCHEDULER uses a DBMS Scheduler external job submitted by the Control Center repository owner which is executed by the default operating system user configured by the DBA. DISABLED prevents execution via these operators. We enable the execution of User Defined activity by setting: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint= NATIVE_JAVA Restart the Control Center service for the change of setting to take effect. cd <ORACLE_HOME>/owb/rtp/sql sqlplus OWBSYS/<password of OWBSYS> @stop_service.sql sqlplus OWBSYS/<password of OWBSYS> @start_service.sql And then run the Process Flow again. We will see that the Process Flow completes successfully. The execution of /tmp/test.sh successfully generated a file /tmp/test.txt, containing the line Hello World!. Pass parameters to User Defined Activity The Process Flow created in the above section has a drawback: the User Defined activity doesn't accept any information from OWB nor does it give any meaningful results back to OWB. That's to say, it lacks interaction. Maybe, sometimes such a Process Flow can fulfill the business requirement. But for most of the time, we need to get the User Defined activity executed according to some information prior to that step. In this section, we will see how to pass parameters to the User Defined activity and pass them into the to-be-executed shell script. First, let's see how to pass parameters to the script. The User Defined activity has an input parameter named PARAMETER_LIST. This is a list of parameters that will be passed to the command. Parameters are separated from one another by a token. The token is taken as the first character on the PARAMETER_LIST string, and the string must also end in that token. Warehouse Builder recommends the '?' character, but any character can be used. For example, to pass 'abc,' 'def,' and 'ghi' you can use the following equivalent: ?abc?def?ghi? or !abc!def!ghi! or |abc|def|ghi| If the token character or '\' needs to be included as part of the parameter, then it must be preceded with '\'. For example '\\'. If '\' is the token character, then '/' becomes the escape character. Let's configure the PARAMETER_LIST parameter as below: And modify the shell script /tmp/test.sh as below: echo $1 is saying hello to $2! > /tmp/test.txt Re-deploy the Process Flow and run it. We will see that the generated /tmp/test.txt contains the following line: Bob is saying hello to Alice! In the example above, the parameters passed into the shell script are static. This case is not so useful because: instead of passing parameters, we can directly write the value of the parameters in the shell script. To make the case more meaningful, we can pass two dynamic parameters, that are obtained from the previous activity, to the shell script. Prepare the Process Flow as below: The Mapping activity MAPPING_1 has two output parameters: FROM_USER, TO_USER. The User Defined activity has two input parameters: FROM_USER, TO_USER. All the four parameters are of String type. Additionally, the Process Flow has two string variables: VARIABLE_FOR_FROM_USER, VARIABLE_FOR_TO_USER. Through VARIABLE_FOR_FROM_USER, the input parameter FROM_USER of USER_DEFINED gets value from output parameter FROM_USER of MAPPING_1. We achieve this by binding both parameters to VARIABLE_FOR_FROM_USER. See the two figures below. In the same way, through VARIABLE_FOR_TO_USER, the input parameter TO_USER of USER_DEFINED gets value from output parameter TO_USER of MAPPING_1. Also, we need to change the PARAMETER_LIST of the User Defined activity like below: Now, the shell script is getting input from the Mapping activity dynamically. Deploy the Process Flow and all of its necessary dependees then run the Process Flow. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! 'USER B' and 'USER A' are two outputs of the Mapping execution. Write the shell script within Oracle Warehouse Builder In the previous section, the shell script is located in the /tmp directory. But sometimes, when the shell script is small, or for the sake of maintaining consistency, you may want to keep the shell script inside Oracle Warehouse Builder. We can achieve this by configuring these three parameters of a User Defined activity properly: COMMAND: Set the path of interpreter, by which the shell script will be interpreted. PARAMETER_LIST: Set it blank. SCRIPT: Enter the shell script content. Note that in Linux the shell script content is passed into the interpreter as standard input at runtime. About how to actually pass parameters to the shell script, we can utilize variable substitutions. As in the following figure, ${FROM_USER} will be replaced by the value of the FROM_USER input parameter of the User Defined activity. So will the ${TO_USER} symbol. Besides the custom substitution variables, OWB also provide some system pre-defined substitution variables. You can refer to the online document for that. Deploy the Process Flow and run it. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! Leverage the return value of User Defined activity All of the previous sections are connecting the User Defined activity to END_SUCCESS with an unconditional transition. But what should we do if we want different subsequent activities for different shell script execution results? 1. The simplest way is to add three simple-conditioned out-going transitions for the User Defined activity just like the figure below. In the figure, to simplify the scenario, we connect the User Defined activity to three End activities. Basically, if the shell script ends successfully, the whole Process Flow will end at END_SUCCESS, otherwise, the whole Process Flow will end at END_ERROR (in our case, ending at END_WARNING seldom happens). In the real world, we can add more complex and meaningful subsequent business logic. 2. Or we can utilize complex conditions to work with different results of the User Defined activity. Previously, in our script, we only have this line: echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt We can add more logic in it and return different values accordingly. echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt if CONDITION_1 ; then ...... exit 0 fi if CONDITION_2 ; then ...... exit 2 fi if CONDITION_3 ; then ...... exit 3 fi After that we can leverage the result by checking RESULT_CODE in condition expression of those out-going transitions. Let's suppose that we have the Process Flow as the following graph (SUB_PROCESS_n stands for more different further processes): We can set complex condition for the transition from USER_DEFINED to SUB_PROCESS_1 like this: Other transitions can be set in the same way. Note that, in our shell script, we return 0, 2 and 3, but not 1. As in Linux system, if the shell script comes across a system error like IO error, the return value will be 1. We can explicitly handle such a return value. Summary Let's summarize what has been discussed in this article: How to create a Process Flow with a User Defined activity in it How to pass parameters from the prior activity to the User Defined activity and finally into the shell script How to write the shell script within Oracle Warehouse Builder How to do variable substitutions How to let the User Defined activity return different values and in what way can we leverage

Read the article

Lightning talk: Coderetreat

- by Michael Williamson

In the spirit of trying to encourage more deliberate practice amongst coders in Red Gate, Lauri Pesonen had the idea of running a coderetreat in Red Gate. Lauri and I ran the first one a few weeks ago: given that neither of us hadn’t even been to a coderetreat before, let alone run one, I think it turned out quite well. The participants gave positive feedback, saying that they enjoyed the day, wrote some thought-provoking code and would do it again. Sam Blackburn was one of the attendees, and gave a lightning talk to the other developers in one of our regular lightning talk sessions: In case you can’t watch the video, I’ve transcribed the talk below, although I’d recommend watching the video if you can — I didn’t have much time to do the transcribing! So, what is a coderetreat? So it’s not just something in Red Gate, there’s a website and everything, although it’s not a very big website. It calls itself a community network. The basic ideas behind coderetreat are: you’ve got one day, and you split it into one hour sections. You spend three quarters of that coding, and do a little retrospective at the end. You’re supposed to start fresh each, we were told to delete our code after every session. We were in pairs, swapping after each session, and we did the same task every time. In fact, Conway’s Game of Life is the only task mentioned anywhere that I find for coderetreat. So I don’t know what we’ll do next time, or if we’re meant to do the same thing again. There are some guiding principles which felt to us like restrictions, that you have to code in crazy ways to encourage better code. Final thing is that it’s supposed to be free for outsiders to join. It’s meant to be a kind of networking thing, where you link up with people from other companies. We had a pilot day with Michael and Lauri. Since it was basically the first time any of us had done anything like this, everybody was from Red Gate. We didn’t chat to anybody else for the initial one. The task was Conway’s Game of Life, which most of you have probably heard of it, all but one of us knew about it when did the coderetreat. I won’t got into the details of what it is, but it felt like the right size of task, basically one or two groups actually produced something working by the end of the day, and of course that doesn’t mean it’s necessarily a day’s work to produce that because we were starting again every hour. The task really drives you more than trying to create good code, I found. It was really tempting to try and get it working rather than stick to the rules. But it’s really good to stop and try again because there are so many what-ifs when you’ve finished writing something, “what if I’d done it this way?”. You can answer all those questions at a coderetreat because it’s not about getting a product out the door, it’s about learning and playing with ideas. So we had all these different practices we were trying. I’ll try and go through most of these. Single responsibility is this idea that everything should do just one thing. It was the very first session, we were still trying to figure out how do you go about the Game of Life? So by the end of forty-five minutes hadn’t produced very much for that first session. We were still thinking, “Do we start with a board, how do we represent all these squares? It can be infinitely big, help, this is getting really difficult!”. So, most of us didn’t really get anywhere on the first one. Although it was interesting that some people started with the board, one group started with the FateDecider class that decides whether things live or die. A sort of god class, but in a good way. They managed to implement all of the rules without even defining how the squares were arranged or anything like that. Another thing we tried was TDD (test-driven development). I’m sure most of you know what TDD is: Watch a test, watch it fail for the right reason Write code to pass the test, watch it pass Refactor, check the test still passes Repeat! It basically worked, we were able to produce code, but we often found the tests defined the direction that code went, which is obviously the idea of TDD. But you tend to find that by the time you’ve even written your first assertion, which is supposed to be the very first thing you write, because you write your tests backwards from the assertions back to the initial conditions, you’ve already constrained the logic of the code in some way by the time you’ve done that. You then get to this situation of, “Well, we actually want to go in a slightly different direction. Can we do this?”. Can we write tests that don’t constrain the architecture? Wrapping up all primitives: it’s kind of turtles all the way down. We had a Size, which has a Width and Height, which both derive from Dimension. You’ve got pages of code before you’ve even done anything. No getters and setters (use tell don’t ask instead): mocks and stubs for tests are required if you want to assert that your results are what you think they should be. You can’t just check the internal state of the code. And people found that really challenging and it made them think in a different way which I think is really good. Not having mutable state: that was kind of confusing because we weren’t quite sure what fitted within that rule and what didn’t, and I think we were trying too hard to follow the rule rather than the guideline. No if-statements: supposed to use polymorphism instead, but polymorphism still requires a factory with conditional behaviour. We did something really crazy to get around this: public T If(bool condition, Func<T> left, Func<T> right) { var dict = new Dictionary<bool, Func<T>> {{true, left}, {false, right}}; return dict[condition].Invoke(); } That is not really polymorphism, is it? For-loops: you can always replace a for-loop with recursion, but it doesn’t tend to make it any more readable unless it’s the kind of task that really lends itself to that. So it was interesting, it was good practice, but it wouldn’t make it easier it’s the kind of tree-structure algorithm where that would help. Having a limit on the number of levels of indentation: again, I think it does produce very nice, clean code, but it wasn’t actually a challenge because you just extract methods. That’s quite a useful thing because you can apply that to real code and say, “Okay, should this method really be going crazy like this?” No talking: we hated that. It’s like there’s two of you at a computer, and one of you is doing the typing, what does the other guy do if they’re not allowed to talk. The answer is TDD ping-pong – one person writes the tests, and then the other person writes the code to pass the test. And that creates communication without actually having to have discussion about things which is kind of cool. No code comments: just makes no difference to anything. It’s a forty-five minute exercise, so what are you going to put comments in code for? Finally, this is my fault. I discovered an entertaining way of doing the calculation that was kind of cool (using convolutions over the state of the board). Unfortunately, it turns out to be really hard to implement in C#, so didn’t even manage to work out how to do that convolution in C#. It’s trivial in some high-level languages, but you need something matrix-orientated for it to really work. That’s most of it, really. The thoughts that people went away with: we put down our answers to questions like “What have you learnt?” and “What surprised you?”, “How are you going to do things differently?”, and most people said redoing the problem is really, really good for understanding it properly. People hate having a massive legacy codebase that they can’t change, so being able to attack something three different ways in an environment where the end-product isn’t important: that’s something people really enjoyed. Pair-programming: also people said that they wanted to do more of that, especially with TDD ping-pong, where you write the test and somebody else writes the code. Various people thought different things about immutables, but most people thought they were good, they promote functional programming. And TDD people found really hard. “Tell, don’t ask” people found really, really hard and really, really, really hard to do well. And the recursion just made things trickier to debug. But most people agreed that coderetreats are really cool, and we should do more of them.

Read the article

DotNetQuiz 2011 on BeyondRelational.com- Want to be quiz master or participant?

- by Jalpesh P. Vadgama

Test your knowledge with 31 Reputed persons (MVPS and bloggers) will ask question on each day of January and you need to give reply on that. You can win cool stuff.My friend Jacob Sebastian organizing this event on his site Beyondrelational.com to sharpen your dot net related knowledge. This Dot NET Quiz is a platform to verify your understanding of Microsoft .NET Technologies and enhance your skills around it. This is a general quiz which covers most of the .NET technology areas. Want to be Quiz Master? Also if you are well known blogger or Microsoft MVP then you can be Quiz master on the dotnetquiz 2011. Following are requirements to be quiz master on beyondrelational.com. I am also a quiz master on beyondrelational.com and Quiz master eligibility: You will be eligible to nominate yourself to become a quiz master if one of the following condition satisfies: You are a Microsoft MVP You are a Former Microsoft MVP You are a recognized blogger You are a recognized web master running one or more technology websites You are an active participant of one or more technical forums You are a consultant with considerable exposure to your technology area You believe that you can be a good Quiz Master and got a passion for that Selection Process: Once you submit your nomination, the Quiz team will evaluate the details and will inform you the status of your submission. This usually takes a few weeks. Quiz Master's Responsibilities: Once you become a Quiz Master for a specific quiz, you are requested to take the following responsibilities. Moderate the discussion thread after your question is published Answer any clarification about your question that people ask in the forum Review the answers and help us to award grades to the participants For more information Please visit following page on beyondrelational.com http://beyondrelational.com/quiz/nominations/0/new.aspx Hope you liked it. Stay tuned!!!

Search Results

Search found 13563 results on 543 pages for 'condition variable'.

Page 241/543 | < Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248 | Next Page >

- by winsmith

- by goluhaque

- by Nihar Sarangi

- by jayjaypg22

- by spazzie

- by user739280

- by fande455

- by John Batdorf

- by rob_g

- by darvids0n

- by Levani

- by user1550588

- by felipeclopes

- by j-g-faustus

- by Magnus Akselvoll

- by Mel

- by Mark Rushakoff

- by Tushar Goel

- by DigitalMercenary

- by pinaldave

- by pinaldave

- by pinaldave

- by Jinggen He

- by Michael Williamson

- by Jalpesh P. Vadgama

< Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248 | Next Page >