Search Results

Search found 17382 results on 696 pages for 'computer science'.

Page 242/696 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• Hard drive clicking noise on Acer AO722

  - by Blank

  I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

  Read the article

• Java Applets fail to launch in Windows 7 64bit

  - by Steve

  Hi can you help? I'm having great trouble launching Java applets using Windows 7 64 bit. I have the 32 bit version of Java installed (as recommended, for use with 32 bit browsers). When I click on an Java applet to open it the Java logo shows with a circular progress bar, but the process goes no further, just the progress bar going round and round. There are no error messages. The computer is a few months old and Java has never worked properly. I've tried with both IE9 and Chrome, followed the suggested fixes, uninstall then reinstall, check certain browser settings (all were in order), check Java control panel settings (again all was in order) delete the internet cache etc, tried 32bit & 64bit Java side by side. All to no avail. I'm baffled Is there anything else to try, or do I have to accept a computer without Java (Very inconvenient!) Thanks

  Read the article

• Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

  - by Espionage724

  It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Certificates compartments (certmgr.msc)?

  - by Royi Namir

  After reading a while , Im trying to understand what kind of certificates will be found at : Personal Other People Trusted Root Certicfiation Authorities will personal will contains only private keys ? I'm a bit confused. What about certificates which arent trusted and I manually trust them , where will they be ? Also , Why do I only have the CurrentUser Tab in my computer ? where is the local computer tab ? here is a picture from the internet. I only have the "current user" Node.... Thanks.

  Read the article

• Hibernate doesn't work in Windows 7 64bit

  - by hey

  Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

  Read the article

• How do I force the system to look for new sound devices?

  - by John Zeringue

  I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

  Read the article

• How to rotate attached monitor to notebook of Sony's Z-series?

  - by user67175

  Is it possible that Sony is selling a top of the line, hugely expensive computer that does not have the basic ability to rotate an attached monitor? Is it possible that the Z-series simply can't do this? The Windows control panel is missing the normal option for "rotation", as is the Nvidia control panel for "orientation" , no additional rotation software works. Sony sales says they do not know the answer to this. Sony technical supports says that the problem lies with Nvidia, Nvidia technical supports says the problem lies with Sony. Any advice for a fix for this short of returning the computer would be greatly appreciated. Also wondering if this problem is common to computers running Windows 7?

  Read the article

• RDP windows key jamming

  - by VBwhatnow

  There is a known bug in RDP; if you lock the screen while connected to a computer the computer you are connected to will have its windows key jammed. There are a few work arounds that involve hammering the windows key and re-locking the screen but this isn't a bug I want to put up with anymore. Microsoft has said they wont fix this bug because it's XP specific and they are only working on security bugs now because XP is at end of life. Is there any way I can fix this or am I just going to have to find an alternative remote desktop software.

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• How to move partition with Users to a new SATA controller?

  - by Al Kepp

  Our current situation: X79 chipset. Windows 7 installed on SATA SSD running on Marvell controller. C:\Users contains just Public and computer-name folders, all the other users are created in E:\Users. That partition is on two HDD's running on an Intel RAID controller. (The motherboard has got two SATA/RAID onboard controllers.) The goal is: Without reinstallation, I want to move SSD to a standard SATA controller. Then I want to get rid of RAID1, and move one HDD to the same internal Intel SATA controller and the current E:\Users move to that new place. I want it to stay as E:\users, but I need to reinstall the HDD to let it work in SATA mode without RAID. So I face several problems. I am sure all are solvable with free software utilities, but I don't know how exactly to do it. I can see the particular problems: I have got all users at E:\Users. When I turn off that E:\ disk, I won't be able to login to Windows. I need at least one admin account to be placed back at C:\users. The current C: runs on standard 120 GB SSD, but it is connected to a Marvell SATA/RAID controller. I am affraid the Windows won't let me put it to Intel SATA controller due to hardware/licence check, and I won't be able to use standard W7 recovery disk either, because there probably isn't marvel SATA/RAID driver on it. I haven't tried anything yet, because I am affraid I can end up with computer not working at all. (I want to move it to a standard ICH10 Intel SATA controller to let us have no problems in future with it. I think it is not very safe when we use any nonstandard hardware to boot the computer.) I need to somehow backup current E:\ disk and restore it to a new E:. I hope this will be the easy part (as long as the admin account will reside on C:). The E: RAID array is very large, but it is almost empty (less than 100 GB of data.) So I can make the partition smaller so it can easily fit to a single SATA HDD.

  Read the article

• Cannot Ping PS3 Using a Wired Connection

  - by Post

  PS3 is using the inbuilt wireless network adapter (I cannot change this) When I try to ping the PS3 from ANY computer which is on a wired ethernet connection, I get Request Timed Out errors. Whenever I ping from a computer with a wireless connection, it works just fine. To be clear: Pinging from Wireless PC to Wireless PS3 works Pinging from Wired PC to Wireless PS3 fails I have tried this on several PC's and Laptops all with the same results. As an attempted solution I have set up static IP's on all related devices. More information: Default Gateway = 192.168.2.1 PS3(wireless) = 192.168.2.100 PC(wired) = 192.168.2.99 Subnet Mask(for both devices, I have made sure) = 255.255.255.0 Thanks

  Read the article

• Can Remote Desktop connect only 2 monitors when the client has 3 or 4 monitors connected?

  - by user12931

  I have three monitors (all 1920x1200) connected to my desktop and I would like to RDP into another computer (running Windows Server 2003) and use only two of my three monitors. The main monitor is used for notification from the LAN like email, build status, etc. I've tried modifying the .rdp file to have a higher resolution (i.e. 3840x1200 ) which sort of works but the bits per pixel goes down to 8 and you have to manually resize the window which means that you need to change it to around 3840x1150. If I supply /span to the commandline it gives me a bit more than 3840 spanned across the three monitors (is there perhaps a limitation of say 4096 for the maximum resolution?). WORKAROUND: Connect twice to the same computer. Here's an interesting post from Microsoft: http://blogs.msdn.com/b/rds/archive/2009/08/21/remote-desktop-connection-7-for-windows-7-windows-xp-windows-vista.aspx

  Read the article

• Discrete Math and Computing Course

  - by ShrimpCrackers

  I was recently admitted into a Computing and Software Systems program (basically software engineering) and one of the first courses I'll be taking is called Mathematical Principles of Computing. The course description: "Integrating mathematical principles with detailed instruction in computer programming. Explores mathematical reasoning and discrete structures through object-oriented programming. Includes algorithm analysis, basic abstract data types, and data structures." I'm not a fan of math, but I've been doing well in all my math classes mostly A's and B's ever since I started two years ago, and I've been doing math every quarter - never took a quarter without math - so I've been doing it all in sequence without gaps. However, I'm worried about this class. I've read briefly on what discrete math is and from what my advisor told me, its connection with computer science is that it has alot to do with proving algorithms. One thing that my instructors briefly touched on and never went into detail was proving algorithms, and when I tried, I just wasn't very good at mathematical induction. It's one of the things that I ignored every time it showed up in a homework problem (usually in Calculus III which I'm finishing up right now). Questions: 1. What can I expect from this class? 2. How can I prepare myself for this class? 3. Other tips? Thank you.

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• Dartisans ep 15 - A re-introduction to Dart Editor for the first time, again.

  Dartisans ep 15 - A re-introduction to Dart Editor for the first time, again. You've seen Dart Editor before, but not like this. Well, maybe you have. If you are new to Dart, you'll be amazed at how many features are in the editor. I'll show off features like code completion, code navigation, debugging, and more. When scaling up to hundreds of thousands of lines of code, you'll be very happy you have a tool that can watch your back. For more info on Dart, please visit www.dartlang.org From: GoogleDevelopers Views: 0 0 ratings Time: 01:00:00 More in Science & Technology

  Read the article

• Error installing SQL Server 2005 Express on AMD Turion?

  - by Angel

  Hello. Is there some compatibility problem between SQL Server 2005 Express and AMD processors? I read something along those lines on various sites, but found nothing 100% definitive. I am trying to install SQL Server 2005 Express on a computer that runs Windows Vista Home Premium, 32-bit edition, and the CPU is "AMD Turion Dual-Core RM-70". I tried both the 32-bit and 64-bit installers, just in case, and the process runs fine until the moment the service attempts to start, where it fails with the same error every time. I'm sorry I can't provide more details or the exact message, it was on a client computer to which I have no access at the moment. I hope someone could shed some light on this. Thank you.

  Read the article

• Bing New Tab Page on Chrome

  - by One Terrorist

  For a long while, my computer had the default new tab page, which I liked. Recently, it has turned into a bing search bar tab. I hate bing. I checked all my settings, removed unused extensions, checked my Chrome files briefly, but I can't find how it keeps coming back! At first I thought it was easy to find; it was set as the new tab page, but it isn't now and it's still here! I installed a new extension after a few tries trying to remove it, called "X New Page Tab", and it worked for one night, then Bing overrode it. Any help please? I really don't want Bing as anything on my computer.

  Read the article

• How do I remove Lenovo Veriface from the login screen?

  - by Xenorose

  I have a Lenovo laptop which came preloaded with Windows 7. Every time I start the computer and get to the Windows log-in screen (where you enter the user password) I get a message about Veriface software giving me the option to use it. I'd like to disable this. I went over the Program's settings and there is nothing that allows you to disable it from loading with Windows. Also, I thought that it might be a service to disable, but I don't see it in the list of services, nor is it in the list of start-up Processes (either in msconfig or in the registry). I'm considering uninstalling it completely, but since it's a part of the lenovo software pack that came with the computer and I do use some of these software, I'm not sure if uninstalling it might also remove wanted things (and uninstalling and reinstalling if needed seems like a mess). Anybody know if there's an easy way to achieve this?

  Read the article

• remove an open wifi of a service provider near my house

  - by wannik

  I'm using Win 7. There is an access point of a service provider wifi near my house. The wifi is not free and not WEB/WPA protected. Everyone can connect to it and it will show the company's login page. (if the username/password are put correctly, their customer can use the net.) I'm not the customer of the company and have my own access point in my house. But my computer always connect to the network of that company. I tried to remove the network but it keep coming back and connect to that access point instead of mine. What can I do to make my computer choose my access point first?

  Read the article

• Extremely slow desktop and laggy. Need help with graphics driver

  - by user171624

  I am a fresh newbie Ubuntu user and I just installed my first Ubuntu 13.04 onto my HP Slate 2. I did a liveCD on my USB drive and installed everything perfectly fine...nice and smooth, not a trace of lag. Then I rebooted using Ubuntu itself on the computer, it was extremely slow and laggy. Icons or any buttons doesn't trigger right away, the performance of the entire thing looks like either 0.25 fps to 1 fps. My HP Slate 2 information: Processor: Intel Atom Z670 1.5Ghz Memory Ram: 2.0 GB Videocard: Intel GMA 600 (PowerVr SGX535) SolidStateDrive(SSD): 32GB I tried installing the intel linux graphics driver and it failed to install because it said I don't have any intel based graphics card. Well...I do as you see above. What can I do? I can't get on the internet on it, I'm using my primary computer (Windows 7) to do all the searchings and put the files onto the USB to move it over to my tablet. Simply...I don't get it...using liveCD on USB, it was all nice and smooth...then after the installation...BOOM! Slow, laggy, and etc. Can anyone help me? Thanks!

  Read the article

• How to fix windows 7 boot process

  - by MasterCorban

  Ok so i used xp for years before i was able to get my hands on the Windows7 RC which i bought a new HDD for, and then followed the process to dual-boot. About a month ago xp started acting funny and i thought the disk might be dying. So i started using Windows7 all the time. Today i start the computer and it cant find the disk which xp was on anymore. I guess its dead. So i remove the xp HD and my computer cant start...insert bootable disk or something similar So how can i remove the primary(dead) xp disk and boot straight to Windows 7?

  Read the article

• Web Animations - the next generation

  Web Animations - the next generation The GDL event page for this event: developers.google.com Ask and vote for questions at www.google.com Browser developers are designing the next generation of animation features that will enhance HTML5 with rich, powerful new animation primitives. Designers and web app developers will all benefit from improved methods of animating content. Hear from developers of Google Chrome and Mozilla Firefox how this works, and learn how to try out the new animation features now in your favorite browser. From: GoogleDevelopers Views: 0 3 ratings Time: 30:00 More in Science & Technology

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >