Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 243/757 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

  • Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

    - by Wouter
    I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

    Read the article

  • Why is this LTO4 Tape-drive not working

    - by Tim Haegele
    # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

    Read the article

  • WinXP How to Tunnel LPT over USB

    - by Michael Pruitt
    I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

    Read the article

  • 12.04 ext4 - cannot create regular file/No space left - with a lot of space and inodes

    - by user1434058
    This seems similar: EXT4 "No space left on device (28)" incorrect but there is no explanation I created an ext4 filesystem on a RAID 1 array with: mke2fs -t ext4 -T small /dev/md0 Copying a single directory with many tiny files I get: cp: cannot create regular file `/mnt/raid1_new/pics/pic3412.jpg': No space left on device space used 5% inodes used 1% I manually tried: cp /source/test1.jpg /mnt/raid1_new/pics/test1.jpg --- error cp /source/test1.jpg /mnt/raid1_new/pics/test2.jpg --- ERROR cp /source/test1.jpg /mnt/raid1_new/pics/test3.jpg --- no error Notes: RAID 1 disks are error free. I tried mv instead of cp and got the same thing. I tried omitting -T small with no effect Can somebody help me understand this magic?

    Read the article

  • Middle Mouse Button does not work in XFCE / Arch Linux

    - by Alp
    I have the XFCE desktop manager installed on my Arch Linux system. With E17 (Enlightenment desktop manager) i had no problems with my mouse: all buttons worked correctly out of the box. But in XFCE my middle mouse button does not fire an event at all (no output with xev). Evdev seems to identify my mouse correctly (Razer Deathadder) because it echoes its name in the xorg logs. I have no idea what could cause this and how to debug the problem. I start both e17 and xfce with startx. Here is my ~/.xinitrc: exec startxfce4 --with-ck-launch #exec enlightenment-start

    Read the article

  • Live noise-filter on line-in

    - by Damon Gant
    I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

    Read the article

  • List all devices of system

    - by pareshverma91
    In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

    Read the article

  • Ubuntu not connecting to network in Hyper-V

    - by soandos
    I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

    Read the article

  • IIS7.5 Windows Authentication missing providers menu item (ntlm)

    - by Alex
    Hello, I'm trying to enable NTLM authentication on a Windows Server 2008 R2 machine with IIS 7.5 for a specific file in my web root. I've been following these instructions http://docs.moodle.org/en/NTLM_authentication#IIS_Configuration In the IIS Manager I open the Authentication module, disable anonymous authentication and enable Windows Authentication however according to every post I can find on the matter I should have a 'providers' option appear but I don't. I've double checked in Server Manager that the 'Windows Authentication' security feature is enabled for IIS. Any help anyone can offer would be great, Thank you!

    Read the article

  • just curious if anybody every tried this- hyper-v r2

    - by tony roth
    I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! thanks

    Read the article

  • Enable anonymous access to report builder in reporting services 2008

    - by ilivewithian
    I have a 2008 reporting services server installed on windows 2003 server. I am trying to allow anonymous access to the report builder folder so that my users do not have to select the remember password option when they login, if they are wanting to use the report builder. All I have found so far is that I should be able to do this with the IIS manager, but that only seems to work for reporting services 2005. Reporting services 2008 does not show up in the IIS manager, enabling anonymous access seems to be hidden somewhere else. How do I enable anonymous access to report builder in reporting services 2008?

    Read the article

  • How to point a Wordpress registered domain to github pages?

    - by Dave Castillo
    I'm trying to use a CNAME file in my git hub project to point to my wordpress registered domain name. E.g. example.com to point to myusername.github.com. I read Github-Setting up a custom domain and it tells me to point the domain to their servers: For a TLD like example.com, you should use an A record pointing to 204.232.175.78: But in the wordpress domain manager I only get the option to specify a nameserver like this: NS1.WORDPRESS.COM NS2.WORDPRESS.COM Inputting 204.232.175.78 in the wordpress manager give me an "invalid TLD." What am I doing wrong and how can I troubleshoot this issue?

    Read the article

  • How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

    - by user45924
    I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

    Read the article

  • Application Compatibility Clients do not show in MSSQL database, but do show in \AppCompat\

    - by rjt
    Application Compatibility Clients are not denied access to the central MSSQL database, but are able to leave their own files in the \AppCompat\ share. The only computer that shows up in the "Microsoft Application Compatibility Manager" database is the the machine i initially created the .MSI installer from. The MSI successfullly pushed out via GPO and like i said there are tons of file in the \AppCompat\ share from many different computers. But only 1 pc shows up in the "Data Collection Manager" database, so i only have data from one machine. i could manually add all these machines (ADNETBIOSNAME\MACHINENAME221$) to the MSSQL AppCompat db permissions list or use an SQL command to do so in batch, but i suspect i must have missed something. Do you manually edit the MSI to set the credentials?

    Read the article

  • Can't login into Fedora 14 (XFCE) desktop. For the second time.

    - by bubba88
    Hello. I'm experiencing a problem with my Fedora 14 XFCE spin, which doesn't seem to let me pass the login screen: I enter my password for my user record, authentication passes (no 'Authentication Failure' message, which was when I tried to login as 'root' without root login enabled), and the screen becomes black (command line) for a couple of seconds and (voila!) my login screen emerges again. I did nothing to cause that, it just suddenly logged me out when I was editing window manager settings via XFCE's built-in GUI utility (choosing window decorations style, from the listbox on the left) For the first time, I had to boot from live CD and do a fresh install, but I don't really want to do that again :) Is there some way to repair this (maybe login via command line and reset window manager settings, I don't know really)? Thank you very much in advance!

    Read the article

  • IIS6 - Change the language to English

    - by user93353
    I have a Windows 2003 VM Image which was created by a Swedish Windows Install. Afterwards the language settings of the machine was changed to English. However, I just added IIS6 Windows component to the machine (from Add/Remove Programs) - IIS6 is not in English. It's in Swedish. IIS Manager's Menu options are in English, but the Title Bar uses hanteraren(Swedish for Manager). The IIS Error pages come in Swedish. How do I get IIS's default language back in English.

    Read the article

  • Splitting an internet connection between multiple separate subnetworks

    - by pythonian4000
    Problem I have an internet connection that I want to split between four separate networks. My requirements are: I need to be able to monitor the amount of bandwidth and data being used by each network, and notify or control as necessary. The four networks should only be able to connect to the internet, not each other. My parents need to be able to operate it, so it needs a simple, preferably Windows-based GUI. Progress so far Server I have a mini-ITX server with six Gigabit ethernet ports - one for the ethernet internet connection, one for each of the four networks, and one for remote access to the server for administration. Bandwidth control I spent a long time researching solutions here. The majority of the control systems/software I found could control bandwidth usage via QOS, but could not monitor or control the amount of data being used. Eventually I found the SoftPerfect Bandwidth Manager, which has everything I need in terms of monitoring and control - per-interface quota management, usage statistics, a web interface for checking usage, and email notifications when quotas are exceeded. It is also Windows-based and has a simple GUI. Internet sharing This is where I am having issues. I am currently using Windows XP Pro SP2 for the server (yes, I know this is far from ideal, but it's the only spare Windows OS I currently have). I can't use the built-in Internet Connection Sharing for several reasons: The upstream internet router has an IP of 192.168.0.1 which ICS clashes with, and I cannot change the router settings. ICS can only share an internet connection with a single interface, but I have four. I have tried bridging the four network cards, but then the Bandwidth Manager cannot see the four individual interfaces - it only sees the bridge. I have tried setting up Dual DHCP DNS server (and am having issues getting DHCP offers to be received by clients), but that would still require gateway software of some sort, which I have been unable to find. My current attempt is to use OpenVPN, with a server for the internet NIC and a separate client for each of the four networks. My thought is that I could bridge the OpenVPN TAP devices to each NIC, meaning that the Bandwidth Manager would control traffic from the bridge instead of the interface. I have not made much progress here though - I've never used OpenVPN before. Questions Is there a Windows software package that does everything I need? (Unlikely, I know) Is there a Windows software package that will share internet between multiple NICs without bridging? Are either of my about attempts feasible? Would it help to have a newer/server version of Windows? Is there a non-Windows alternative that is easy to use?

    Read the article

  • Can't start my Windows XP Virtual Machine: Insufficient Disk Space

    - by Rob
    Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

    Read the article

  • Windows Vista wont recognize SSD drive

    - by Spiros
    I just bought an SSD drive for my Vista (32bit) box (120GB OCZ Agility 3). Unfortunately windows vista won't display it in the my computer window, and generally wont let me work on it. However, the bios recognizes the SSD drive correctly, and when I go on the windows device manager the drive is there as well. I can see the device properties. On the volumes, when I click on populate, I have: Disk: Disk1 Type: Uknown Status: not initialized Partition style: not avaiable Unallocated space: 0MB Reserved space: 0MB Any ideas what could be wrong? Thanks

    Read the article

  • Aruba Wireless Controller 200 and AP70 manual

    - by techie
    I have an Aruba wireless system that is currently in use but there is no documentation from the previous person in charge. I have no manuals or login information for the wireless controllers and APs. I checked the Aruba website and you need to register to access the support information but registration isn't instant and takes several days. I've waited for quite a while now and have tried googling and checking the Aruba forums but have found no indication of a manual. What I really need is the ability to reset the controller and APs so I can access the device with the default username and password. There is no reset button on this device so I have no idea how you go about resetting the controller and APs. Hm it seems I can't create a new tag as a new user. If possible can someone add an "Aruba" tag?

    Read the article

  • Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

    - by Tong Wang
    I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

    Read the article

  • Windows does not detect any modems anymore[HSPA]

    - by Shenal Silva
    By an accident i uninstalled my Connect manager (ZTE). but when i re-install it the virtual CD drive is detected but it does not detect the drivers. When i direct to the folder containing the relevant drivers(.sys files) still it doesnt detect. Then i tried a modem of a different brand Huawei the same problem presists As i understand it is not a device(brand) driver specific issue as it does not detect modem(dongles) of any brand. when i plugged in a different USB device(a pen drive) the driver is detected and it works perfectly. Please help me with the issue i have tried system restore but it doesnt work. I want a repair that works without re-installing windows [Edit] I tried Karan's suggested method with usboblivion it didnt work. now im sure that the issue does not deal with the registry

    Read the article

  • Unable to logoff, disconnect, or reset terminal server user in production environment

    - by l0c0b0x
    I'm looking for some ideas on how to disconnect, logoff, or reset a user's session in a 2008 Terminal Server (unable to login as the user either as it is completely locked-up). This is a production environment, so rebooting the server or doing something system-wide is out of the question for now. Any Powershell tricks to help us with this? We've tried killing the session's processes too, directly from the same terminal server (from the task manager, Terminal Services Manager and the Resource Monitor) with no results. Help!

    Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >