Search Results

Search found 8937 results on 358 pages for 'disk defragmenting'.

Page 243/358 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• Can't run Ubuntu from disc

  - by alex

  When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

  Read the article

• Windows 7 can't make back up

  - by J. Pablo Fernández

  I've been trying to get Windows 7 to make a backup for a week or so. I'm backing up to a local NAS and I'm getting this error: Windows Backup: Troubleshooting Options Check your backup Windows Backup could not create a zip file. This could be because the drive that Windows is installed on does not have enough space or it could be a temporary error. Make sure you have at least 400 MB of free space and try again. Backup time: 2009-09-07 14:48 Backup location: \VANGELIS\Shared\Backup\lennon\ Error code: 0x81000015 My local hard disk has 290GB free and my NAS has 200GB free. Any ideas what might be wrong?

  Read the article

• How to fix Windows 2008 R2 BOOTMGR is missing

  - by cyberkiwi

  BOOTMGR IS MISSING PRESS CTRL+ALT+DEL TO RESTART Note: This is a VM on VMWare ESX server, but that should not matter I put in the 2008 R2 x64 install dvd and can get to recovery, but it lists no Operating Systems. Clicking on Next brings me to +=========================== System Recovery Options +=========================== Choose a recovery tool Operating system: Unknown or (Unknown) Local Disk ..... Command Prompt I start the command prompt, go to C:\ and perform a dir /a Apart from files I put there myself, these are showing $Recycle.Bin Documents and Settings [C:\Users] Program Files Program Files (x86) ProgramData Recovery System Volume Information Temp Users Windows Where to go next? Is it like the NTLDR problem with Windows 2003 where I can just drop a file in there and it will be hunky dory again?

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Google App Engine says "Must authenticate first." while trying to deploy any app

  - by Oleksandr Bolotov

  Google App Engine says "Must authenticate first." while trying to deploy any app: me@myhost /opt/google_appengine $ python appcfg.py update ~/sda2/workspace/lyapapam/ Application: lyapapam; version: 1. Server: appengine.google.com. Scanning files on local disk. Scanned 500 files. Scanned 1000 files. Initiating update. Email: <my_email_was_here>@gmail.com Password for <my_email_was_here>@gmail.com: Error 401: --- begin server output --- Must authenticate first. --- end server output --- We are getting this message with any appliation and under any developer account avialable to us That's what we have installed: App Engine SDK - 1.3.2 PIL - 1.1.7 Python - 2.5.5 pip - 0.6.3 ssl - 1.15 wsgiref - 0.1.2 So, what can it be? Is it well known problem?

  Read the article

• Recommend a good DVD or BD replacement drive that can read older CD-R/DVD+R media?

  - by Irinotecan

  So I have a bunch of older CD-R (and a few DVD+R) discs that are either suffering from "bit rot", or a case of crappy no-name Chinese DVD drives being unable to read some or all of anymore. I just threw my last no-name DVD drive in the trash after it ejected a disk still spinning causing it to scratch to the point of being useless, so I'm looking for a replacement drive this time around with an eye for quality over a dirt cheap price. I'd prefer a BD drive, but I'll take any suggestions for good, reliable DVD or BD drives that people have reported having good success with for reading older burned media. Any takers?

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• Microsoft Basic Office 2007 Activation Keys won't work after re-installing on my Laptop

  - by Rolnik

  So, I've upgraded my hard-drive on my laptop, and proceeded to grab my trusty copper-faced Official MS Office disk to do an install. I have three licenses with the fancy green-blue paper that identifies the license keys. Problem is, that for each of these license keys, when the Office 2007 software asks that I enter the "Product Key" it states: The key is incorrect. Verify that you have the correct key, and then retype it Why would Microsoft want to inhibit/prohibit re-installs on the same machine that the software was initially installed to? Incidentally, the same goofy error happens with each of the three valid product key (activation keys) that I enter.

  Read the article

• Restoring Box Sync (box.com) using physical media after OS reinstall

  - by sjrm

  I have my Box Folder on a different drive ( D: ) than my Operating System Drive ( C: ) I follow these instructions to set the local folder on the second drive. https://support.box.com/hc/en-us/articles/200852947-How-Can-I-Change-the-Default-Folder-Location-for-Box-Sync- I had to format and reinstall Windows 7, leaving the other drive (D: ) untouched. now i reinstalled Box Sync, and directed it to the same location where i already have all my files. However, Box Sync renamed the folder to (Box ([email protected]) ) as a bckup, and is downloading everything again. As i have like 30Gb of files, and it takes many hour to download them, i just want to use the files that i already have in my local disk. i tried copying all files again to the new local Box Folder, but files started to get duplicated. Is there any way to avoid downloading everything again each time i reinstall my OS ? Thanks

  Read the article

• Splitting a drive which has layout as mirrored and type as dynamic

  - by shiva

  I have a C drive/volume in my server with layout = mirror and type =dynamic and status as healthy(boot,pagefile,crashdump). I have some questions regarding this configuration: I think it is a raid configuration.Please correct me if I am wrong. I read that, mirroring is nothing but raid-1 configuration. All my software and OS is in this drive. I want my software to be in a separate drive, but I am not sure if I can create a separate drive from the above mentioned c drive. I want to know: a. If I can do it and how ?(using disk management) b. If this is a right approach ?

  Read the article

• Slow Web Performance on two Windows 2008 R2 Terminal Servers

  - by Frank Owen

  We have two Windows 2008 R2 servers that we use for agents to log into to access our customers systems. Saturday morning we received complaints that on both servers the web is running horribly slow. This happens on all websites and the majority of the time the web site times out trying to load. Other users located at the same site but using their desktop machine do not see any issue. We have rebooted the boxes and checked settings and cannot find the cause. The CPU/Memory/Network/Disk Space use on the server is very low. I thought it might have been a MS update causing the issue but it appears the last update was applied in January. We have rebooted both boxes and I am in process of trying a different browser. Any ideas what could be causing this?

  Read the article

• Trying to get a PC to boot off a bootable SD card that is inside an USB attached Android device.

  - by Cyril

  First, I'd like to make myself look less a madman than I may have appeared to be. I wanted to have a bootable USB stick with me at all times, but it's less convenient because it's an extra object and it's easier to lose, forget etc. Then I thought, I have an Android phone, and it has a micro SD in it; perfect. Not all PC's can boot off a card reader, but the phone itself is a card reader when attached as a disk drive. Or at least so I thought. Turns out that my netbook BIOS (tested on Asus eeePC) refuses to see it as an external harddrive; it only recognizes it as a generic USB device and doesn't offer an option to boot from it. The device has a name "Android phone" or smth, so it seems to me that it doesn't work as a "pure" card reader, and instead still manifests itself as a phone. Can it be somehow overridden?

  Read the article

• Cannot install netbeans on Gentoo

  - by siebz0r

  I'm trying to install Netbeans on my Gentoo system and I just cannot get it to work. When I'm compiling it It fails due to not being able to locate org.apache.maven.project.MavenProject. [nb-javac] class file for org.apache.maven.project.MavenProject not found I'm suspecting it has something to do with the installation not being able to find several files. However these are reported as warnings. The missing files have a version in their filenames, the files that are on the disk have a version number that is slightly off. So that explains why these cannot be found. The full output of the install can be found here: http://pastebin.com/43NS2ktz

  Read the article

• master-slave-slave replication: master will become bottleneck for writes

  - by JMW

  hi, the mysql database has arround 2TB of data. i have a master-slave-slave replication running. the application that uses the database does read (SELECT) queries just on one of the 2 slaves and write (DELETE/INSERT/UPDATE) queries on the master. the application does way more reads, than writes. if we have a problem with the read (SELECT) queries, we can just add another slave database and tell the application, that there is another salve. so it scales well... Currently, the master is running arround 40% disk io due to the writes. So i'm thinking about how to scale the the database in the future. Because one day the master will be overloaded. What could be a solution there? maybe mysql cluster? if so, are there any pitfalls or limitations in switching the database to ndb? thanks a lot in advance... :)

  Read the article

• Authorization error when testing FTP to UNC

  - by user64204

  We have a Windows Server 2008 R2 with Active Directory (hereafter called DC) running as a domain controller on which we have IIS and an FTP site installed. We have a second Server 2008 (hereafter called SHARE) which is joined to that domain and has a disk shared as a network share (\\share\Office). That network share is used as the ftp's physical path on DC. We've tested the FTP from the IIS FTP configuration panel, by clicking on Basic Settings... then Test Settings.... When setting Administrator as a username with the Connect as... option, everything is fine: When no user is provided we can the below error: Q1: Could someone explain in more understandable terms what is written in the Details text area?

  Read the article

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• How to Delete File stderr1 on a SAP System?

  - by Techboy

  I have a file called stderr1 in the work directory of several of the SAP servers in my production cluster. It has grown to around 19GB's to fill the hard disk on each server. I have deleted all trace files and WP files from within transaction SM50 but that hasn't deleted it (or re-named it to .old). If I try to rename or delete it manually, it says I can't because the file is in use. Please can you tell me how I can delete or shrink the stderr1 file?

  Read the article

• ZFS: RAIDZ versus stripe with ditto blocks

  - by RandomInsano

  I'm going to build a ZFS file server from FreeBSD. I learned recently that I can't expand a RAIDZ udev once it's part of the pool. That's a problem since I'm a home user and will probably add one disk a year tops. But what if I set copies=3 against my entire pool and just throw individual drives into the pool separated? I've read somewheres that the copies will try and distribute across drives if possible. Is there a guarantee there? I really just want protection from bit rot and drive failure on the cheap. Speed's not an issue since it'll go over a 1Gb network and at MOST stream 720p podcasts. Would my data be guaranteed safe from a single drive failure? Are there things I'm not considering? Any and all input is appreciated.

  Read the article

• Copying windows 8 Users folder having long long paths

  - by bilal.haider

  I was trying to move my "Users" folder in Windows 8 as described here and here. But when I try to copy the folder using "xcopy" in Windows Installation Disk Repair Mode, after some files are copied, I get "insufficient memory". The files on which the error is given are like C:\Users\Bilal\Application Data\Application Data\Application Data.........Application Data\Application Data..... What is the point in such directories within directories? I also tried copying them using Mini Windows XP, but the problem was there too.. Also tried copying using Parted Magic Live CD... but still.. So now, how can I move them? Another Question. Is moving such/ system files using Linux a good idea? Does it do anything to permissions?

  Read the article

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• VMWare guest OS is not using full hard drive space

  - by syuusuke

  Hey everyone, I'm wondering if you can give me some insight on how to figure this out. I've recently virtualized a w2k3 server that had 10GB C:\ drive size. Once I finished virtualizing it, I expanded the disk to 20GB for C:\ and within guest OS (W2K3) computer management settings, you can see it recognizes as 20GB partition C:. But for some reason, if I opened windows explorer and see the properties of C:\, it will only show total size of 10GB. Does anyone know how to solve this or even had this problem before?

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >