Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 243/346 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• I found two usb sticks on the ground. Now what ?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• How do I disable Windows Search Indexing Service while on battery on Windows 7?

  - by Slaggg

  Since upgrading from Windows XP to Windows 7, I've found laptop battery life is reduced. One issue is that the Windows Search Indexing Service is constantly running, even when on battery power. Using Resource Monitor shows it is often the top consumer of CPU time and top producer of disk activity. I imagine this is one of the primary reasons the battery is getting drained faster. I cannot find any options to tell Windows Search Indexing Service to not index while on battery power. The only solution seems to be to stop the service, and also disable the service (if you just stop it, it will restart itself after a while). Doing this gives me considerably more battery life, but it's a pain because I have to re-enable the service when plugged in again. Is there a better solution?

  Read the article

• Recommendations for SSD for server and database use?

  - by Tony_Henrich

  SSDs are a new technology and they are constantly improving. A lot of the posts here were posted in 2009 when SSDs where less mature and not as fast. What was recommend back then is probably out of date today because of better options. The SSD is used to hold SQL Server databases. Size is probably 128G. The database is used with a CMS and web server so web pages need to get their data and render as fast as possible. Which modern SSD is recommended for such a use? Is there an SSD better than Intel X-25 E/M in terms of performance/cost? (I am also evaluating cost between : RAM + UPS (semi persistent) vs SSD for same amount of gigabytes. No RAID is involved)

  Read the article

• Apache stops serving requests when connections increase

  - by Gunjan

  The values for MaxClients, ServerLimit etc parameters are quite high (4000). Available RAM on the server is high too (~8G). Load average remains below 1 on a 24 core CPU. But when the number of visitors on the website increase apache just stops serving requests. The apache error log is blank and access log shows no more requests coming in. Restarting apache makes it work again until the number of requests increases again. Any ideas where to start looking? UPDATE Getting the below errors in apache error log on running it with LogLevel Debug [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 479 idle, and 1027 total children

  Read the article

• good books about server architecture?

  - by ajsie

  when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

  Read the article

• Ultrabook graphics card for gaming

  - by Francisc

  I want to get a Windows 8 "ultrabook" that I can also use for gaming. Most seem to have Intel HD Graphics 4000 (integrated) or NVIDIA GeForce GT 620M (dedicated). From experience, are they any good? Things I enjoy playing are Call of Duty, Fifa and Skyrim for example. I'm looking for a device that will work on the next generation of those games as well, so it shouldn't just barely work on the current versions that exist now. So, would those two cards suffice? Any advice is much appreciated. Thank you.

  Read the article

• What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

  - by Ogapo

  I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• How can I improve the rendering performance of this old DOS application?

  - by MicTech

  I have very old DOS Application (CadSoft Eagle - PCB Designer) and I want to work with it on my workstation with Windows 7. Then I install Windows 98 and that software into VmWare Player. But that software has serious problem with redrawing screen. It's very slow in comparison with my Intel Celeron 333MHz with Windows 98. I have same problem if I try to use DOSBox on Windows XP (same Celeron 333MHz). I also trying run this application directly on Windows XP (same Celeron 333MHz) with compatibility mod set to "Windows 98", but I get "(0Dh): General Protection Fault". Can someone give me good advice how I solve that?

  Read the article

• How do I know if my disks are being hit with too much IO reads or writes or both?

  - by Mark F

  Hi All, So I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. But how do I really know what the max IO numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an IO bound problem. Is there a better way to predict when IO is reaching its limits? This article was interesting but not giving the answer I desire. "http://serverfault.com/questions/61510/linux-how-can-i-see-whats-waiting-for-disk-io". So is my best bet surrounding just looking at 'CPU IO WAIT'? There must be a more reactive method for this? Best, M

  Read the article

• How to get rid of disturbance on LCD monitor?

  - by Uday Kanth

  I have an Acer G195HQL LCD monitor and recently I've been noticing a lot of disturbance on the screen. They appear to be like flickering horizontal white lines. These lines are more apparent on dark backgrounds like grey/black. The curious thing is that, the intensity of these lines increases and decreases with no specific pattern. The disturbance temporarily goes away when I detach and re-attach the VGA cable at the CPU end. My speakers are magnetically shielded, but the problem persists even when I turn them off. I don't know what to do and this is really annoying me. Is it possible that my monitor is failing? Or is there anything I should check?

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• Hardware changes to require XP Activation ? (for a Virtual Machine)

  - by NVRAM

  I have WXP-64 running on a VM and, for testing and performance reasons, I would like to occasionally change the allocations for it. Changes might include: Number of CPU cores, Amount of RAM Add/remove network adapters. But I'm concerned that XP will demand re-activation and that I might eventually have licensing issues if I do this. So, can anyone tell me: What kind of changes trigger re-activation in XP? Is there limits or caveat with regard to re-activation? I've perused this question and the article it references, but wanted more recent and verified info. (FWIW, I'm not trying to cheat: the OS copy was purchased explicitly for the VM.)

  Read the article

• Dual 9500GT video cards, one works

  - by bossDub

  I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

  Read the article

• Sharing RAM resources between 2 or more computers

  - by davee44

  I know there was a somewhat similar question before: How to share CPU or RAM? But, let me just specify it a little more... When Microsoft Windows requires more RAM capacity than available it uses a swap-file to temporarily store the data there, this is actually something like a hard-drive-based RAM. This technology is used for many years. Theoretically, it shouldn't be too hard to implement a similar technology that uses the RAM of different computer(s) in the network for temporary data storage. This just requires a software that runs on computers in the network that accepts and returns data from/to the main computer and keep that data in the RAM; plus the operation system of the main computer must have the ability to use computers in the network instead of (or in addition to) the swap-file. I wonder, are there any implementations of this idea? This would allow users to build RAM clusters using all of their home or office computers, that will boost the performance of a single computer for some development/gaming/video tasks, etc.

  Read the article

• Missing kernel on debian-testing-amd64-DVD-1

  - by Kyrol

  I want to install the Debian testing linux version. But at a certain point of the installation, an error occurs: Impossible to install kernel. a compatible kernel version is missing... … or something like that. I see that the image ISO of the DVD is less than 4GB, but is impossible that there is no compatible kernel version for the system. I have an Asus X53Sc with Intel core I7-2630QM, Geforce GT 520MX.

  Read the article

• Performance Drop Lingers after Load [closed]

  - by Charles

  Possible Duplicate: How do you do Load Testing and Capacity Planning for Databases I'm noticing a drop in performance after subsequent load tests. Although our cpu and ram numbers look fine, performance seems to degrade over time as sustained load is applied to the system. If we allow more time between the load tests, the performance gets back to about 1,000 ms, but if you apply load every 3 minutes or so, it starts to degrade to a point where it takes 12,000 ms. None of the application servers are showing lingering apache processes and the number of database connections cools down to about 3 (from a sustained 20). Is there anything else I should be looking out for here?

  Read the article

• When computer turns on: keyboard/mouse/monitor don't work?

  - by dave

  the computer is barely good,at least i think..features Intel core 2 4 GB ram Nvidia Radeon 9600 512 mb Gigabite motherboad (the others i can't remember).. Used this computer for 3 years with no problem...The problem started one day after while it froze everything, then I shut down with removing the electricity power. A few hours later, I tried to log in to the computer but nothing moved. Nor keyboard nor mouse nor monitor worked, I was thinking that should be a delay so I left it some time. After a minute it turned off without my help around 30 seconds then it turned on automatically, but was the same problem like before and it goes again and again...any suggestions? If more info/specs required, let me know.

  Read the article

• Occasional HDD Related Hangs

  - by diolemo

  I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

  Read the article

• How many nginx/fastcgi processes do you use?

  - by qliq

  I have a drupal-based website on a VPS with 1GB RAM and 1Ghz processor share. The webserver is nginx along with php-fastcgi. Currently I am using 10 nginx and 13 php-fastcgi processes. The server load is high most of the times while half of the RAM is unused. The CPU usage rarely reaches 80%. I have tried some other combinations of nginx/php-fastcgi but am not sure what is the optimal combination because I am quite ignorant about what's going on below the surface. So I appreciate if you could share your experience or give me some clues.

  Read the article

• Why does Ubuntu 10.04 not see my hard drives?

  - by CT

  I am trying to install Ubuntu Desktop 10.04 64bit to a new machine. mobo = gigabyte x58a-ud3r cpu = i7 930 ssd = Kingston 64GB V+ hhd = wd 1tb black When the installation gets to the prepare partions step, no partitions are listed. Drives are recognized by BIOS and WinXP setup sees them. I have also tried Ubuntu 9.10. It does not see the drives also. Just searching around I found a suggestion to select "no dmraid" in additional options screen. This did not seem to help. Any ideas?

  Read the article

• ESXi onboard SATA passthrough [on hold]

  - by lodge93

  I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >