Search Results

Search found 10748 results on 430 pages for 'disk encryption'.

Page 244/430 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • HP Smart Array p400i with Intel X25-M 160 SSD

    - by user67304
    I have a pair of x25-M 160 Intel SSD's in an HP DL360 G5 with a p400i Smart Array running 512 BBWC. The disk performance I am getting on this box and another identical one does not come close to matching the same two drives running through a cheap 3ware RAID card. Any idea? I have played with the cache settings, but nothing allows me to get the same results. It seems like the Smart Array controller is the bottleneck.

    Read the article

  • EBS with RAID0 (striping) and restoring snapshots

    - by grourk
    We have a MySQL database on EC2 and are looking at the disk IO performance there. Currently we have a single EBS volume with XFS and take snapshots for backup. It seems that a lot of people have seen significant performance gains by striping across multiple EBS volumes with software RAID. If this is done, how does one take snapshots and ensure the consistency of the file system? It seems to me that restoring the file system from multiple snapshots could be tricky.

    Read the article

  • Identify OpenVZ virtual machine from inside

    - by Alfred Godoy
    Is there any way for me to identify which OpenVZ container I am in, from inside the container? I am working on a setup where OpenVZ machines shall boot the same (read-only) disk image, so I can not configure them individually in the file system. I need a unique identification for each of the virtual servers, to be used by scripts running inside the OpenVZ containers. (I'm running Debian Lenny, BTW.)

    Read the article

  • Is there a compression method for compressing a group of very similar files, without archiving them?

    - by awiebe
    I want to compress a large nuber of files that have near identical headers, and also some data, however I do not wish to archive them, nor do I wish to zip them individually(because the copression ratio would be much higher if substitutions of similar blocks could be done using a single table). Does a compression method exist to do this already, or should I implement it myself. Note: Don't say "Disk space is cheap", because I may want to use this on an embedded system.

    Read the article

  • Downloading video from SWF

    - by Niger
    If I am seeing a SWF video in my web browser (sample: http://www.somename.com/swf/x92154) how can I download the video to disk? If I use Save As it is saving .swf, not the video.

    Read the article

  • File Locked on Flash Drive

    - by AtomFury
    I'm completely frustrated. I'm an owner of a OCZ 8GB Rally2 which I've used flawlessly for about 4 months now, and all of a sudden this week I begin getting errors telling me that I can't delete a file due to "make sure the disk is not write-protected, full or and the file is not in-use" dialog. Here's what I've tried: Deleting the file using FileASSASSIN (it's worked on everything else but files on this darn flash drive) Formatting the flash drive and then restoring the backed up information (I format to NTFS, FYI) Any suggestions on what to do?

    Read the article

  • Why doesn't video run smoothly on my laptop anymore?

    - by andygrunt
    This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

    Read the article

  • Free-space driven log rotation on linux?

    - by kdt
    Someone just asked me 'how long should we keep logs for our application', and my answer was 'until the disk is full' as there's no reason to throw them away other than running out of space. However, standard logrotate wants us to specify a specific period + number of rotations. Is there something similar that would let us say "rotate daily, and keep as much history as you like until there is only 5% space free"? The platform is Redhat Linux.

    Read the article

  • Windows 7duplicate in boot menu

    - by Mick
    I deploy my Windows 7 with imagex.exe. I do this by means some batch script : Win7_install.bat: cls Diskpart /s Win7_install.txt Imagex /apply Win7_October.wim 1 C: Bcdboot C:\Windows Exit Win7_install.txt: SELECT DISK 0 CLEAN CREATE PARTITION PRIMARY SIZE=102400 SELECT PARTITION 1 FORMAT fs=ntfs LABEL=”SYSTEM” quick ASSIGN LETTER=C CREATE PARTITION PRIMARY SELECT PARTITION 2 FORMAT fs=ntfs LABEL=”DATA” quick SELECT PARTITION 1 ACTIVE EXIT Then after restart I have duplicate entries in boot menu. Anybody have some idea how fix it? Regards

    Read the article

  • NTFS External Drive takes too long to takes data in Mac ?

    - by mgpyone
    I've an Seagate 500 GB external HD (NTFS). To read/write it on Mac (OSX 10.6.2) , I've tried MacFUSE and NTFS-3G to write my HD on Mac. Though I could be able to see the hard drive, it takes too long to see the contents like this is this normal ? also the data transfer takes too long time and the hard disk becomes too hot . Any suggestions are most welcome.

    Read the article

  • Best way to partition 1TB (Linux&Windows7)

    - by Simon
    Any intelligent way to partition 1TB and be prepared for resizing/adding/deleting partitions? I was thinking about LVM, but as far as i remember, Windows7 can't be installed on logical volume right? For now my plan is: - ~150GB for Windows7 and other stuff (VisualStudio..., maybe I'll split it 100/50 or something like that) - simple NTFS - 850GB = LVM - disk for linux (Ubuntu) and other stuff virtual machines etc. I'm mostly interested in how and what tools should I use to get easy in maintain partitions for both systems.

    Read the article

  • How do I transfer a Windows 7 installation to a new HDD?

    - by Nidonocu
    I've just got all the parts I need to build a new PC but the SATAII hard drive I ordered did not come and I've received an IDE drive instead. While I wait to get the correct drive type and send the new IDE drive back, is it possible to install Windows 7 on to an existing IDE drive that I have and then transfer the contents of that drive over to the new SATA disk when it arrives without Windows having any issues?

    Read the article

  • How to set up a file server in a restricted corporate environment

    - by Emilio M Bumachar
    I work in a big corporation, and the disk space my team gets in the corporate file server is so low, I am considering turning my work PC into a file server. I ask this community for links to tutorials, software suggestions, and advice in general about how to set it up. My machine is an Intel Core2Duo E7500 @ 3GHz, 3 GB of RAM, Running Windows XP Service Pack 3. Upgrading, formatting or installing another OS is out of the question. But I do have Administrator priviledges on the PC, and I can install programs (at least for now). A lot of security software I don't even know about is and must remain installed. But I only need communication whithin the corporate network, which is not restricted. People have usernames (logins) on the corporate network, and I need to use them to restrict access. Simply put, I have a list of logins of team members, and only people in the list should access the files. I have about 150 GB of free disk space. I'm thinking of allocating 100 GB to the team's shared files. I plan monthly backups on machines of co-workers, same configuration. But automation of backups is a nice, unnecessary feature: it's totally acceptable for me to manually copy the contents to a different machine once a month. Uptime is important, as everyone would use these files in their daily work. I have experience as a python and C programmer, but no experience whatsoever as a sysadmin, and almost nothing of my programming experience is network programming. I'm a complete beginner in this. Thanks in advance for any help. EDIT I honestly appreciate all the warnings, I really do, but what I plan to make available is mostly stuff that now is solely on DVDs just for space reasons. It's 'daily work' to read them, but 'daily work write' files will remain on the corporate server. As for the importance of uptime, I think I overstated it: a few outages are OK, it's already an improvement over getting the DVDs. As for policy, my manager is kind of on my side, I will confirm that before making my move. As for getting more space through the proper channels, well, that was Plan A, and it's still on the table... But I don't have much hope. I'm not as "core businees" as I'd like.

    Read the article

  • How do I restore my audio after uninstalling Ventrilo?

    - by Marcx
    Hi, I've a Dell studio 1555 bought on september with Windows 7 64bit Professional on it. The audio device works proprerly, while listening to audio contents (from disk or internet) When I use Ventrilo, the audio from other people sounds good and I hear their voices clearly When I use any other VOIP programs like Teamspeak 3, MSN or Skype, I hear a disturbed voice, and it's impossible to comprehend something... Anyway everything worked fine until I installed Ventrilo, but removing it didn´t solve my problem. So how do I restore my audio?

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • Ram cache on Windows Server 2008

    - by Jonas Lincoln
    Scenario: We have a file cluster on a UNC share. A couple of IIS web servers serve files from this UNC share. This is done through a IIS-module, and this module does not use the built-in IIS-caching feature. We'd like to cache the files from the UNC share in a ram disk. So far, we've found this product: http://www.superspeed.com/servers/supercache.php Are there other products that can help us cache the files from the UNC-share in ram?

    Read the article

  • Deleting Temporary Internet Files through Group Policy

    - by Kami
    I have a domain controller running on Windows 2008 Server R2 and users login to application servers on which Windows 2003 Server SP2 is installed. I have applied a Group Policy to clean temporary internet files on exit i.e to delete all temporary internet files when users close the browser. But the group policy doesn't seem to work as user profile size keeps on increasing and the major space is occupied by temporary internet files therefore increasing the disk usage. How can i enforce automatic deletion of temporary internet files?

    Read the article

  • Macbook Pro 2010 13,3'' 2,4 vs. 2,66Ghz

    - by Milde
    Hi, is the 13,3'' MBP 2,66ghz worth the extra 300€, comparing it to the 2,4ghz version? What CPUs are installed? P8600/P8800 ? 300€ for 70GB more space and 0,26ghz or would it be better to use the 300€ for a solid state disk? What's your opinion? Thanks in advance, Milde

    Read the article

  • Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

    - by zimmy6996
    I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

    Read the article

  • Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

    - by CapBBeard
    Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

    Read the article

  • IE9 freezes with Protected Mode enabled

    - by Peter Wone
    After a disk failure and a new build of Win7, IE9 locks up on most web pages including Bing. Running it as Admin works, and turning off Protected Mode also works. Neither of these was necessary prior to the rebuild and examination of colleagues' workstation config show that it's only my workstation with this quirk. Can anyone suggest a remedy? I have tried bcdedit /set {current} nx AlwaysOff and a reboot, with no effect.

    Read the article

  • RHEL6 kick start fails with kernel panic - not syncing error

    - by mrchampe
    On a brand new (just unboxed) Dell Precision 7500 computer, I began a kickstart using a red hat boot disk and a kickstart file hosted at an http address. There is a picture of the full error below with trace information I believe this is different than the other questions relating to kernel panic errors. What I would like to know is What causes the kernel panic How does one fix this such that the kickstart finishes Additional information can be provided as necessary.

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >