Search Results

Search found 7914 results on 317 pages for 'invalid argument'.

Page 244/317 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• Silverlight, WCF service, integrated security AND ssl/https not possible?

  - by Flores

  I have this setup that works perfectly when using http. A silverlight 3 client .net 4 WCF service hosted in IIS with basicHttpBinding and using integrated security on the site When setting https to required on the website the setup stops working. Using the wcftestclient on the uri I get the message: The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. The remote server returned an error: (401) Unauthorized. Maybe this makes sense because the wcftestclient does not pass credentials? in the web.config the security mode for the service binding is set is set to 'Transport'. The silverlight client is created like this: BasicHttpBinding basicHttpBinding = new BasicHttpBinding(); basicHttpBinding.Security.Mode = BasicHttpSecurityMode.Transport; var serviceClient = new ImportServiceClient(basicHttpBinding, serviceAddress); The service address is ofcourse starting with https:// And the silverlight client reports this error: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via Remember, swithing it back to http (and setting security mode to 'TransportCredentialOnly' makes everything working again. Is the setup I want even supported? If so, how should it be configured?

  Read the article

• I just don't get AudioFileReadPackets

  - by Eric Christensen

  I've tried to write the smallest chunk of code to narrow down a problem. It's now just a few lines and it doesn't work, which makes it pretty clear that I have a fundamental misunderstanding of how to use AudioFileReadPackets. I've read the docs and other examples online, and apparently I'm just not getting. Could you explain it to me? Here's what this block should do: I've previously opened a file. I want to read just one packet - the first one of the file - and then print it. But it crashes on the AudioFileReadPackets line: AudioFileID mAudioFile2; AudioFileOpenURL (audioFileURL, 0x01, 0, &mAudioFile2); UInt32 *audioData2 = (UInt32 *)malloc(sizeof(UInt32) * 1); AudioFileReadPackets(mAudioFile2, false, NULL, NULL, 0, (UInt32*)1, audioData2); NSLog(@"first packet:%i",audioData2[0]); (For clarity, I've stripped out all error handling.) It's the AFRP line that crashes out. (I understand that the third and fourth argument are useful, and in my "real" code, I use them, but they're not required, right? So NULL in this case should work, right?) So then what's going on? Any guidance would be much appreciated. Thanks.

  Read the article

• Perl OO frameworks and program design - Moose and Conway's inside-out objects (Class::Std)

  - by Emmel

  This is more of a use-case type of question... but also generic enough to be more broadly applicable: In short, I'm working on a module that's more or less a command-line wrapper; OO naturally. Without going into too many details (unless someone wants them), there isn't a crazy amount of complexity to the system, but it did feel natural to have three or four objects in this framework. Finally, it's an open source thing I'll put out there, rather than a module with a few developers in the same firm working on it. First I implemented the OO using Class::Std, because Perl Best Practices (Conway, 2005) made a good argument for why to use inside-out objects. Full control over what attributes get accessed and so on, proper encapsulation, etc. Also his design is surprisingly simple and clever. I liked it, but then noticed that no one really uses this; in fact it seems Conway himself doesn't really recommend this anymore? So I moved to everyone's favorite, Moose. It's easy to use, although way way overkill feature-wise for what I want to do. The big, major downside is: it's got a slew of module dependencies that force users of my module to download them all. A minor downside is it's got way more functionality than I really need. What are recommendations? Inconvenience fellow developers by forcing them to use a possibly-obsolete module, or force every user of the module to download Moose and all its dependencies? Is there a third option for a proper Perl OO framework that's popular but neither of these two?

  Read the article

• Python: Class factory using user input as class names

  - by Sano98

  Hi everyone, I want to add class atttributes to a superclass dynamically. Furthermore, I want to create classes that inherit from this superclass dynamically, and the name of those subclasses should depend on user input. There is a superclass "Unit", to which I can add attributes at runtime. This already works. def add_attr (cls, name, value): setattr(cls, name, value) class Unit(object): pass class Archer(Unit): pass myArcher = Archer() add_attr(Unit, 'strength', 5) print "Strenght ofmyarcher: " + str(myArcher.strength) Archer.strength = 2 print "Strenght ofmyarcher: " + str(myArcher.strength) This leads to the desired output: Strenght ofmyarcher: 5 Strenght ofmyarcher: 2 But now I don't want to predefine the subclass Archer, but I'd rather let the user decide how to call this subclass. I've tried something like this: class Meta(type, subclassname): def __new__(cls, subclassname, bases, dct): return type.__new__(cls, subclassname, Unit, dct) factory = Meta() factory.__new__("Soldier") but no luck. I guess I haven't really understood what new does here. What I want as a result here is class Soldier(Unit): pass being created by the factory. And if I call the factory with the argument "Knight", I'd like a class Knight, subclass of Unit, to be created. Any ideas? Many thanks in advance! Bye -Sano

  Read the article

• What is the correct way to configure a spring TextEncryptor for use on Heroku

  - by Ollie Edwards

  I have a spring TextEncryptor defined like this <bean id="textEncryptor" class="org.springframework.security.crypto.encrypt.Encryptors" factory-method="text"> <constructor-arg value="${security.encryptPassword}" /> <constructor-arg value="${security.encryptSalt}" /> </bean> Which is fed these properties security.encryptPassword=47582920264f212c566d5e5a6d security.encryptSalt=39783e315e6a207e733d6f4141 Which works fine on my local environment. When I deploy to Heroku I get java.lang.IllegalArgumentException: Unable to initialize due to invalid secret key at org.springframework.security.crypto.encrypt.CipherUtils.initCipher(CipherUtils.java:110) at org.springframework.security.crypto.encrypt.AesBytesEncryptor.encrypt(AesBytesEncryptor.java:65) at org.springframework.security.crypto.encrypt.HexEncodingTextEncryptor.encrypt(HexEncodingTextEncryptor.java:36) ... Caused by: java.security.InvalidKeyException: Illegal key size at javax.crypto.Cipher.checkCryptoPerm(Cipher.java:972) at javax.crypto.Cipher.implInit(Cipher.java:738) at javax.crypto.Cipher.chooseProvider(Cipher.java:797) at javax.crypto.Cipher.init(Cipher.java:1276) at javax.crypto.Cipher.init(Cipher.java:1215) at org.springframework.security.crypto.encrypt.CipherUtils.initCipher(CipherUtils.java:105) ... 53 more So I tried some smaller keys but I always get the same problem. What is the correct key size to use on Heroku?

  Read the article

• How to set focus to a brand new TextBox which was created as a result of a databinding in WPF?

  - by Mike

  Hi everyone, I have a WPF ItemsControl that is bound to an ObservableCollection. The XAML: <ItemsControl Name="mItemsControl"> <ItemsControl.ItemTemplate> <DataTemplate> <TextBox Text="{Binding Mode=OneWay}"></TextBox> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> The codebehind: private ObservableCollection<string> mCollection = new ObservableCollection<string>(); public MainWindow() { InitializeComponent(); this.mCollection.Add("Test1"); this.mCollection.Add("Test2"); this.mItemsControl.ItemsSource = this.mCollection; } private void Button_Click(object sender, RoutedEventArgs e) { this.mCollection.Add("new item!"); } When I click a button, it adds a new string to the databound ObservableCollection which triggers a new TextBox to appear. I want to give this new textbox focus. I've tried this technique from a related StackOverflow question but it always sets focus to the textbox before the newly created one. private void Button_Click(object sender, RoutedEventArgs e) { this.mCollection.Add("new item!"); // MoveFocus takes a TraversalRequest as its argument. TraversalRequest request = new TraversalRequest(FocusNavigationDirection.Previous); // Gets the element with keyboard focus. UIElement elementWithFocus = Keyboard.FocusedElement as UIElement; // Change keyboard focus. if (elementWithFocus != null) { elementWithFocus.MoveFocus(request); } } My need seems simple enough, but it's almost like the new textbox doesn't really exist until a slight delay after something is added to the ObservableCollection. Any ideas of what would work? Thanks! -Mike

  Read the article

• how to use anonymous generic delegate in C# 2.0

  - by matti

  Hi. I have a class called NTree: class NTree<T> { public NTree(T data) { this.data = data; children = new List<NTree<T>>(); _stopTraverse = false; } ... public void Traverse(NTree<T> node, TreeVisitor<T> visitor) { try { _stopTraverse = false; Traverse(node, visitor); } finally { _stopTraverse = false; } } private void TraverseInternal(NTree<T> node, TreeVisitor<T> visitor) { if (_stopTraverse) return; if (!visitor(node.data)) { _stopTraverse = true; } foreach (NTree<T> kid in node.children) Traverse(kid, visitor); } When I try to use Traverse with anonymous delegate I get: Argument '2': cannot convert from 'anonymous method' to 'NisConverter.TreeVisitor' The code: tTable srcTable = new tTable(); DataRow[] rows; rootTree.Traverse(rootTree, delegate(TableRows tr) { if (tr.TableName == srcTable.mappingname) { rows = tr.Rows; return false; } }); This however produces no errors: static bool TableFinder<TableRows>(TableRows tr) { return true; } ... rootTree.Traverse(rootTree, TableFinder); I have tried to put "arrowhead-parenthisis" and everything to anonymous delegate but it just does not work. Please help me! Thanks & BR -Matti

  Read the article

• How do I pass a callback function to sqlite3_exec on iOS 5.1?

  - by John Doh

  I am new to both xcode/iOS/Objective-C and sqlite. I am trying to teach myself the basics - and I would like to use the sqlite3 wrapper "sqlite3_exec" for a select query. For some reason, I can't find a simple example anywhere of someone doing this. Basically, the method has a parameter (the third one) for a callback function: int sqlite3_exec( sqlite3*, /* An open database */ const char *sql, /* SQL to be evaluated */ int (*callback)(void*,int,char**,char**), /* Callback function */ void *, /* 1st argument to callback */ char **errmsg /* Error msg written here */ ); That's fine. I'm no stranger to callbacks. However, I just can't seem to get the syntax down right. I took over one of the view controllers in my iPad (iOS 5.1) xcode (4.3) project, and made the changes shown below: #import "SecondViewController.h" #import "sqlite3.h" #import "AppState.h" @interface SecondViewController () @end @implementation SecondViewController - (int)myCallback:(void *)a_parm argc:(int)argc argv:(char **)argv column:(char **)column { return 0; } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. //grab questionnaire names char *sql = "select * from QST2Main order by [Name]"; char *err = nil; sqlite3 *db = [[AppState sharedManager] getgCn]; sqlite3_exec(db, sql, myCallback, nil, &err); } Essentially, I want to run a query when this view first loads, to store some data for later use. But, XCode doesn't like the "myCallback" usage at the bottom there. It says: Undeclared Use of Identifier 'myCallback.' That method is declared in the header file, and I've even tried making it static. Nothing seems to make this error go away. I know I must be doing something fundamentally wrong here, but for the life of me I can't figure out what - I can't even find other code samples in this area that could help me figure out what I'm missing. Many thanks!

  Read the article

• In-document schema declarations and lxml

  - by shylent

  As per the official documentation of lxml, if one wants to validate a xml document against a xml schema document, one has to construct the XMLSchema object (basically, parse the schema document) construct the XMLParser, passing the XMLSchema object as its schema argument parse the actual xml document (instance document) using the constructed parser There can be variations, but the essense is pretty much the same no matter how you do it, - the schema is specified 'externally' (as opposed to specifying it inside the actual xml document). If you follow this procedure, the validation occurs, sure enough, but if I understand it correctly, that completely ignores the whole idea of the schemaLocation and noNamespaceSchemaLocation attributes from xsi. This introduces a whole bunch of limitations, starting with the fact, that you have to deal with instance<-schema relation all by yourself (either store it externally or write some hack to retrieve the schema location from the root element of the instance document), you can not validate the document using multiple schemata (say, when each schema governs its own namespace) and so on. So the question is: maybe I am missing something completely trivial or doing it wrong? Or are my statements about lxml's limitations regarding schema validation true? To recap, I'd like to be able to: have the parser use the schema location declarations in the instance document at parse/validation time use multiple schemata to validate a xml document declare schema locations on non-root elements (not of extreme importance) Maybe I should look for a different library? Although, that'd be a real shame, - lxml is a de-facto xml processing library for python and is regarded by everyone as the best one in terms of performace/features/convenience (and rightfully so, to a certain extent)

  Read the article

• Exclude string from wildcard in bash

  - by Peter O'Doherty

  Hi, I'm trying to adapt a bash script from "Sams' Teach Yourself Linux in 24 Hours" which is a safe delete command called rmv. The files are removed by calling rmv -d file1 file2 etc. In the original script a max of 4 files can by removed using the variables $1 $2 $3 $4. I want to extend this to an unlimited number of files by using a wildcard. So I do: for i in $* do mv $i $HOME/.trash done The files are deleted okay but the option -d of the command rmv -d is also treated as an argument and bash objects that it cannot be found. Is there a better way to do this? Thanks, Peter #!/bin/bash # rmv - a safe delete program # uses a trash directory under your home directory mkdir $HOME/.trash 2>/dev/null # four internal script variables are defined cmdlnopts=false delete=false empty=false list=false # uses getopts command to look at command line for any options while getopts "dehl" cmdlnopts; do case "$cmdlnopts" in d ) /bin/echo "deleting: \c" $2 $3 $4 $5 ; delete=true ;; e ) /bin/echo "emptying the trash..." ; empty=true ;; h ) /bin/echo "safe file delete v1.0" /bin/echo "rmv -d[elete] -e[mpty] -h[elp] -l[ist] file1-4" ;; l ) /bin/echo "your .trash directory contains:" ; list=true ;; esac done if [ $delete = true ] then for i in $* do mv $i $HOME/.trash done /bin/echo "rmv finished." fi if [ $empty = true ] then /bin/echo "empty the trash? \c" read answer case "$answer" in y) rm -i $HOME/.trash/* ;; n) /bin/echo "trashcan delete aborted." ;; esac fi if [ $list = true ] then ls -l $HOME/.trash fi

  Read the article

• sed/awk or other: one-liner to increment a number by 1 keeping spacing characters

  - by WizardOfOdds

  EDIT: I don't know in advance at which "column" my digits are going to be and I'd like to have a one-liner. Apparently sed doesn't do arithmetic, so maybe a one-liner solution based on awk? I've got a string: (notice the spacing) eh oh 37 and I want it to become: eh oh 36 (so I want to keep the spacing) Using awk I don't find how to do it, so far I have: echo "eh oh 37" | awk '$3>=0&&$3<=99 {$3--} {print}' But this gives: eh oh 36 (the spacing characters where lost, because the field separator is ' ') Is there a way to ask awk something like "print the output using the exact same field separators as the input had"? Then I tried yet something else, using awk's sub(..,..) method: ' sub(/[0-9][0-9]/, ...) {print}' but no cigar yet: I don't know how to reference the regexp and do arithmetic on it in the second argument (which I left with '...' for now). Then I tried with sed, but got stuck after this: echo "eh oh 37" | sed -e 's/\([0-9][0-9]\)/.../' Can I do arithmetic from sed using a reference to the matching digits and have the output not modify the number of spacing characters? Note that it's related to my question concerning Emacs and how to apply this to some (big) Emacs region (using a replace region with Emacs's shell-command-on-region) but it's not an identical question: this one is specifically about how to "keep spaces" when working with awk/sed/etc.

  Read the article

• vimscript: calling dictionary functions with call()

  - by intuited

  I'm hoping to call a "static" dictionary function using call(). By "static" I mean that the keyword 'dict' is not used in the function's definition. I use this nomenclature in the hopes that the effect of this keyword is to declare a static member function as is possible in java/C++/etc, ie to put the function name in the class namespace but allow it to be called without referencing an object. However this doesn't seem to work. For example: " Setup: let testdict = { } funct! testdict.funct() echo "called" endfunct " Tests: " Following each line is an indented comment " containing its output in message land, ie what was echoed. call testdict.funct() " called echo testdict.funct " 667 echo string(testdict.funct) " function('667') echo function('667') " E475: Invalid argument: 667 echo function('testdict.funct') " testdict.funct call call(testdict.funct, [ ]) " E725: Calling dict function without Dictionary: 667 " Same deal if there's an intermediate variable involved. let TestdictDotFunct = testdict.funct echo TestdictDotFunct " 667 echo string(TestdictDotFunct) " function('667') call TestdictDotFunct() " E725: Calling dict function without Dictionary: 667 From the help topic E725: It is also possible to add a function without the "dict" attribute as a Funcref to a Dictionary, but the "self" variable is not available then. So logic would seem to indicate that if "self" is not available, then it should be possible to call the function referenced by the Funcref without a Dictionary. However this doesn't seem to be the case. Am I missing something? Vim version info: $ aptitude show vim-gnome Package: vim-gnome State: installed Automatically installed: no Version: 2:7.2.245-2ubuntu2

  Read the article

• Some general C questions.

  - by b-gen-jack-o-neill

  Hello. I am trying to fully understand the process pro writing code in some language to execution by OS. In my case, the language would be C and the OS would be Windows. So far, I read many different articles, but I am not sure, whether I understand the process right, and I would like to ask you if you know some good articles on some subjects I couldn´t find. So, what I think I know about C (and basically other languages): C compiler itself handles only data types, basic math operations, pointers operations, and work with functions. By work with functions I mean how to pass argument to it, and how to get output from function. During compilation, function call is replaced by passing arguments to stack, and than if function is not inline, its call is replaced by some symbol for linker. Linker than find the function definition, and replace the symbol to jump adress to that function (and of course than jump back to program). If the above is generally true and I get it right, where to final .exe file actually linker saves the functions? After the main() function? And what creates the .exe header? Compiler or Linker? Now, additional capabilities of C, today known as C standart library is set of functions and the declarations of them, that other programmers wrote to extend and simplify use of C language. But these functions like printf() were (or could be?) written in different language, or assembler. And there comes my next question, can be, for example printf() function be written in pure C without use of assembler? I know this is quite big question, but I just mostly want to know, wheather I am right or not. And trust me, I read a lots of articles on the web, and I would not ask you, If I could find these infromation together on one place, in one article. Insted I must piece by piece gather informations, so I am not sure if I am right. Thanks.

  Read the article

• Reliable strtotime() result for different languages

  - by Maksee

  There was always a strange bug in Joomla when adding new article with back-end displayed with a language other than English (for me it's Russian). The field "Finish Publishing" started to be current date instead of "Never" equivalent in Russian. For a site in php4 finally found that strtotime function returns different results for arbitrary words. For "Never" it always -1 and joomla relies on this result in the JDate implementation. But in other case it sometimes returns a valid date. For russian translation of Never (???????) it is the case, but also for single "N" it is the case, so if one decided to change the string to some other he or she would face the same issue. So the code below <?php echo "Res:".strtotime("N")."<br>"; echo "Res:".strtotime("Nev")."<br>"; echo "Res:".strtotime("Neve")."<br>"; echo "Res:".strtotime("Never")."<br>"; ?> Outputs: Res:1271120400 Res:-1 Res:-1 Res:-1 So what are the solutions would be in this case? I would like not to write language-specific date.php handler, but to modify date method of JDate class, but what are language-neutral changes would be in order to detect invalid string. Thank you

  Read the article

• Asp.net Login Status Question: It Aint Working

  - by contactmatt

  I'm starting to use Role Management in my website, and I'm current following along on the tutorial from http://www.asp.net/Learn/Security/tutorial-02-vb.aspx . I'm having a problem with the asp:LoginStatus control. It is not telling me that I am currently logged in after a successful login. This can't be true because after successfully logging in, my LoggedInTemplate is shown. The username and passwords are simply stored in a array. Heres the Login.aspx page code. Protected Sub btnLogin_Click(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles btnLogin.Click ' Three valid username/password pairs: Scott/password, Jisun/password, and Sam/password. Dim users() As String = {"Scott", "Jisun", "Sam"} Dim passwords() As String = {"password", "password", "password"} For i As Integer = 0 To users.Length - 1 Dim validUsername As Boolean = (String.Compare(txtUserName.Text, users(i), True) = 0) Dim validPassword As Boolean = (String.Compare(txtPassword.Text, passwords(i), False) = 0) If validUsername AndAlso validPassword Then FormsAuthentication.RedirectFromLoginPage(txtUserName.Text, chkRemember.Checked) End If Next ' If we reach here, the user's credentials were invalid lblInvalid.Visible = True End Sub Here is the content place holder on the master page specifically designed to hold Login Information. On successfull login, the page is redirected to '/Default.aspx', and the LoggedIn Template below is shown...but the status says Log In. <asp:ContentPlaceHolder Id="LoginContent" runat="server"> <asp:LoginView ID="LoginView1" runat="server"> <LoggedInTemplate> Welcome back, <asp:LoginName ID="LoginName1" runat="server" />. </LoggedInTemplate> <AnonymousTemplate> Hello, stranger. </AnonymousTemplate> </asp:LoginView> <br /> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Logout.aspx" /> </asp:ContentPlaceHolder> Forms authentication is enabled. I'm not sure what to do about this :o.

  Read the article

• ActiveMQ broker configuration error when specifying persistenceAdapter: "One of '{WC[##other:"http:/

  - by Joe

  I am setting up a simple ActiveMQ embedded broker. It works fine, until I try to configure a persistence adapter. I am basically just copying the configuration from http://activemq.apache.org/persistence.html#Persistence-ConfiguringKahaPersistence. When I add this configuration to my Spring configuration, like so: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:amq="http://activemq.apache.org/schema/core" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core-5.3.0.xsd"> <amq:broker useJmx="true" persistent="true" brokerName="localhost"> <amq:transportConnectors> <amq:transportConnector name="vm" uri="vm://localhost"/> </amq:transportConnectors> <amq:persistenceAdapter> <amq:kahaPersistenceAdapter directory="activemq-data" maxDataFileLength="33554432"/> </amq:persistenceAdapter> </amq:broker> </beans> I get the error: cvc-complex-type.2.4.a: Invalid content was found starting with element 'amq:persistenceAdapter'. One of '{WC[##other:"http://activemq.apache.org/schema/core"]}' is expected. When I take out the amq:persistenceAdapter element, it works fine. The same error happens no matter which persistence adapter I include in the body, e.g. jdbc, journal, etc. Any help would be greatly appreciated. Thanks.

  Read the article

• Memory mapped files and "soft" page faults. Unavoidable?

  - by Robert Oschler

  I have two applications (processes) running under Windows XP that share data via a memory mapped file. Despite all my efforts to eliminate per iteration memory allocations, I still get about 10 soft page faults per data transfer. I've tried every flag there is in CreateFileMapping() and CreateFileView() and it still happens. I'm beginning to wonder if it's just the way memory mapped files work. If anyone there knows the O/S implementation details behind memory mapped files I would appreciate comments on the following theory: If two processes share a memory mapped file and one process writes to it while another reads it, then the O/S marks the pages written to as invalid. When the other process goes to read the memory areas that now belong to invalidated pages, this causes a soft page fault (by design) and the O/S knows to reload the invalidated page. Also, the number of soft page faults is therefore directly proportional to the size of the data write. My experiments seem to bear out the above theory. When I share data I write one contiguous block of data. In other words, the entire shared memory area is overwritten each time. If I make the block bigger the number of soft page faults goes up correspondingly. So, if my theory is true, there is nothing I can do to eliminate the soft page faults short of not using memory mapped files because that is how they work (using soft page faults to maintain page consistency). What is ironic is that I chose to use a memory mapped file instead of a TCP socket connection because I thought it would be more efficient. Note, if the soft page faults are harmless please note that. I've heard that at some point if the number is excessive, the system's performance can be marred. If soft page faults intrinsically are not significantly harmful then if anyone has any guidelines as to what number per second is "excessive" I'd like to hear that. Thanks.

  Read the article

• Makefile for DOS/Windows and Cygwin

  - by Thomas Matthews

  I need to have a makefile work under DOS (Windows) and Cygwin. I having problems with the makefile detecting the OS correctly and setting appropriate variables. The objective is to set variables for the following commands, then invoke the commands in rules using the variables: Delete file: rm in Cygwin, del in DOS. Remove directory: rmdir (different parameters in Cygwin and DOS) Copy file: cp in Cygwin, copy in DOS. Testing for file existance: test in Cygwin, IF EXIST in DOS. Listing contents of a file: cat in Cygwin, type in DOS. Here is my attempt, which always uses the else clause: OS_KIND = $(OSTYPE) #OSTYPE is an environment variable set by Cygwin. ifeq ($(OS_KIND), cygwin) ENV_OS = Cygwin RM = rm -f RMDIR = rmdir -r CP = cp REN = mv IF_EXIST = test -a IF_NOT_EXIST = ! test -a LIST_FILE = cat else ENV_OS = Win_Cmd RM = del -f -Q RMDIR = rmdir /S /Q IF_EXIST = if exist IF_NOT_EXIST = if not exist LIST_FILE = type endif I'm using the forward slash character, '/', as a directory separator. This is a problem with the DOS command, as it is interpreting it as program argument rather than a separator. Anybody know how to resolve this issue? Edit: I am using make with Mingw in both Windows Console (DOS) and Cygwin.

  Read the article

• Zend: How to authenticate using OpenId on local server.

  - by NAVEED

  I am using zend framework. Now I want to authenticate users with other already registered accounts using RPX. I am following the 3 steps as described at RPX site: 1- Get the Widget 2- Receive Tokens 3- Choose Providers I created a controller(person) and action(signin) to show widget and my own signin form. When following action (http://test.dev/#person/personsignin) is called then my own login form and widget is shown successfully. # is used in above URL for AJAX indication. public function personsigninAction() { $this->view->jsonEncoded = true; // Person Signin Form $PersonSigninForm = new Form_PersonSignin(); $this->view->PersonSigninForm = $PersonSigninForm; $this->view->PersonSigninForm->setAction( $this->view->url() ); $request = $this->getRequest(); if ( $request->isPost() ) { } } There are two problems while login using openid widget: When I am authenticated from outside(for example: Yahoo) then I am redirected to http://test.dev, therefor indexAction in called in indexController and home page is shown. I want to redirect to http://test.dev/#person/personsignin after authentication and want to set session in isPost() condition of personsigninAction() (described above). For now I consider indexAction to be called when outside authentication is done. Now I posted the code from http://gist.github.com/291396 in indexAction to follow step 3 mentioned above. But it is giving me following error: An error occured: Invalid parameter: apiKey Am I using the right way to use this. This is my very first attempt to this stuff. Can someone tell me the exact steps using my above actions? Thanks.

  Read the article

• TableView Cells unresponsive

  - by John Donovan

  I have a TableView and I wish to be able to press several cells one after the other and have messages appear. At the moment the cells are often unresponsive. I found some coed for a similar problem someone was kind enough to post, however, although he claimed it worked 100% it doesn't work for me. The app won't even build. Here's the code: -(UIView*) hitTest:(CGPoint)point withEvent:(UIEvent*)event { // check to see if the hit is in this table view if ([self pointInside:point withEvent:event]) { UITableViewCell* newCell = nil; // hit is in this table view, find out // which cell it is in (if any) for (UITableViewCell* aCell in self.visibleCells) { if ([aCell pointInside:[self convertPoint:point toView:aCell] withEvent:nil]) { newCell = aCell; break; } } // if it touched a different cell, tell the previous cell to resign // this gives it a chance to hide the keyboard or date picker or whatever if (newCell != activeCell) { [activeCell resignFirstResponder]; self.activeCell = newCell; // may be nil } } // return the super's hitTest result return [super hitTest:point withEvent:event]; } With this code I get this warning: that my viewController may not respond to pointsInside:withEvent (it's a TableViewController). I also get some faults: request for member 'visibleCells' in something not a structure or a union. incompatible type for argument 1 of pointInsideWithEvent, expression does not have a valid object type and similar. I must admit I'm not so good at reading other people's code but I was wondering whether the problems here are obvious and if so if anyone could give me a pointer it would be greatly appreciated.

  Read the article

• Problem with copying local data onto HDFS on a Hadoop cluster using Amazon EC2/ S3.

  - by Deepak Konidena

  Hi, I have setup a Hadoop cluster containing 5 nodes on Amazon EC2. Now, when i login into the Master node and submit the following command bin/hadoop jar <program>.jar <arg1> <arg2> <path/to/input/file/on/S3> It throws the following errors (not at the same time.) The first error is thrown when i don't replace the slashes with '%2F' and the second is thrown when i replace them with '%2F': 1) Java.lang.IllegalArgumentException: Invalid hostname in URI S3://<ID>:<SECRETKEY>@<BUCKET>/<path-to-inputfile> 2) org.apache.hadoop.fs.S3.S3Exception: org.jets3t.service.S3ServiceException: S3 PUT failed for '/' XML Error Message: The request signature we calculated does not match the signature you provided. check your key and signing method. Note: 1)when i submitted jps to see what tasks were running on the Master, it just showed 1116 NameNode 1699 Jps 1180 JobTracker leaving DataNode and TaskTracker. 2)My Secret key contains two '/' (forward slashes). And i replace them with '%2F' in the S3 URI. PS: The program runs fine on EC2 when run on a single node. Its only when i launch a cluster, i run into issues related to copying data to/from S3 from/to HDFS. And, what does distcp do? Do i need to distribute the data even after i copy the data from S3 to HDFS?(I thought, HDFS took care of that internally) IF you could direct me to a link that explains running Map/reduce programs on a hadoop cluster using Amazon EC2/S3. That would be great. Regards, Deepak.

  Read the article

• boost::binding that which is already bound

  - by PaulH

  I have a Visual Studio 2008 C++ application that does something like this: template< typename Fcn > inline void Bar( Fcn fcn ) // line 84 { fcn(); }; template< typename Fcn > inline void Foo( Fcn fcn ) { // this works fine Bar( fcn ); // this fails to compile boost::bind( Bar, fcn )(); }; void main() { SYSTEM_POWER_STATUS_EX status = { 0 }; Foo( boost::bind( ::GetSystemPowerStatusEx, &status, true ) ); // line 160 } *The call to GetSystemPowerStatusEx() is just for demonstration. Insert your favorite call there and the behavior is the same. When I go to compile this, I get 84 errors. I won't post them all unless asked, but they start with this: 1>.\MyApp.cpp(99) : error C2896: 'boost::_bi::bind_t<_bi::dm_result<MT::* ,A1>::type,boost::_mfi::dm<M,T>,_bi::list_av_1<A1>::type> boost::bind(M T::* ,A1)' : cannot use function template 'void Bar(Fcn)' as a function argument 1> .\MyApp.cpp(84) : see declaration of 'Bar' 1> .\MyApp.cpp(160) : see reference to function template instantiation 'void Foo<boost::_bi::bind_t<R,F,L>>(Fcn)' being compiled 1> with 1> [ 1> R=BOOL, 1> F=BOOL (__cdecl *)(PSYSTEM_POWER_STATUS_EX,BOOL), 1> L=boost::_bi::list2<boost::_bi::value<_SYSTEM_POWER_STATUS_EX *>,boost::_bi::value<bool>>, 1> Fcn=boost::_bi::bind_t<BOOL,BOOL (__cdecl *)(PSYSTEM_POWER_STATUS_EX,BOOL),boost::_bi::list2<boost::_bi::value<_SYSTEM_POWER_STATUS_EX *>,boost::_bi::value<bool>>> 1> ] If anybody can point out what I may be doing wrong, I would appreciate it. Thanks, PaulH

  Read the article

• Why does Java's invokevirtual need to resolve the called method's compile-time class?

  - by Chris

  Consider this simple Java class: class MyClass { public void bar(MyClass c) { c.foo(); } } I want to discuss what happens on the line c.foo(). At the bytecode level, the meat of c.foo() will be the invokevirtual opcode, and, according to the documentation for invokevirtual, more or less the following will happen: Look up the foo method defined in compile-time class MyClass. (This involves first resolving MyClass.) Do some checks, including: Verify that c is not an initialization method, and verify that calling MyClass.foo wouldn't violate any protected modifiers. Figure out which method to actually call. In particular, look up c's runtime type. If that type has foo(), call that method and return. If not, look up c's runtime type's superclass; if that type has foo, call that method and return. If not, look up c's runtime type's superclass's superclass; if that type has foo, call that method and return. Etc.. If no suitable method can be found, then error. Step #3 alone seems adequate for figuring out which method to call and verifying that said method has the correct argument/return types. So my question is why step #1 gets performed in the first place. Possible answers seem to be: You don't have enough information to perform step #3 until step #1 is complete. (This seems implausible at first glance, so please explain.) The linking or access modifier checks done in #1 and #2 are essential to prevent certain bad things from happening, and those checks must be performed based on the compile-time type, rather than the run-time type hierarchy. (Please explain.)

  Read the article

• Vimeo Desktop App OAuth

  - by Barry

  Hi Guys, I'm currently having massive trouble with Vimeo's Oauth implementation and my desktop app. My program does the following correctly. 1- Requests a Unauthorized Request Token with my key and secret and returns - a Token and a Token secret. 2- Generates a URL for the user to go to using the token which then shows our application's name and allows the user to Authorize us to use his/her account. It then shows a verifier which the user returns and puts into our app. The problem is the third step and actually exchanging the tokens for the access tokens. Basically every time we try and get them we get a "Invalid / expired token - The oauth_token passed was either not valid or has expired" I looked at the documentation and there's supposed to be a callback to a server when deployed like that which gives the user an "authorized token" but as im developing a desktop app we can't do this. So I assume the token retrieved in 1 is valid for this step. (actually it seems it is: http://vimeo.com/forums/topic:22605) So I'm wondering now am I missing something here on my actual vimeo application account now? is it treating it as a web hosted app with callbacks? all the elements are there for this to work and I've used this same component to create a twitter Oauth login in exactly the same way and it was fine. Thanks in advance, Barry

  Read the article

• PHP cURL JSON Decode (X-AUTH Header)

  - by TheCyX

  <?php // Show Profile $curl = curl_init(); curl_setopt ($curl, CURLOPT_URL, "https://example/api"); curl_setopt ($curl, CURLOPT_RETURNTRANSFER, true); curl_setopt ($curl, CURLOPT_HTTPAUTH, CURLAUTH_BASIC ) ; curl_setopt ($curl, CURLOPT_HTTPHEADER, array('X-AUTH: 123456789')); $projects = curl_exec($curl); // This is empty? echo $projects; //Decode $phpArray = json_decode($projects); print_r($phpArray); foreach ($phpArray as $key => $value) { // Line 17, sure its empty, but why? echo "<p>$key | $value</p>"; } ?> Warning: Invalid argument supplied for foreach() in /html/api.php on line 17 The API needs this authentification: $ curl -i -H "X-AUTH: 123456789" https://example/api JSON File: {"id":"123456","hostId":null,"Nickname":"thecyx","DisplayName":"thecyx","AppDisplayName":"thecyx","Score":"300","Account":"Full"} The $project variable is empty. If I'm posting the API Url in the Broswer its working. And, if possible, what's the correct way to get the JSON Data e.g. [Nickname],[Score]?

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >