Search Results

Search found 7086 results on 284 pages for 'explain'.

Page 246/284 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

  • Implementing Database Settings Using Policy Based Management

    - by Ashish Kumar Mehta
    Introduction Database Administrators have always had a tough time to ensuring that all the SQL Servers administered by them are configured according to the policies and standards of organization. Using SQL Server’s  Policy Based Management feature DBAs can now manage one or more instances of SQL Server 2008 and check for policy compliance issues. In this article we will utilize Policy Based Management (aka Declarative Management Framework or DMF) feature of SQL Server to implement and verify database settings on all production databases. It is best practice to enforce the below settings on each Production database. However, it can be tedious to go through each database and then check whether the below database settings are implemented across databases. In this article I will explain it to you how to utilize the Policy Based Management Feature of SQL Server 2008 to create a policy to verify these settings on all databases and in cases of non-complaince how to bring them back into complaince. Database setting to enforce on each user database : Auto Close and Auto Shrink Properties of database set to False Auto Create Statistics and Auto Update Statistics set to True Compatibility Level of all the user database set as 100 Page Verify set as CHECKSUM Recovery Model of all user database set to Full Restrict Access set as MULTI_USER Configure a Policy to Verify Database Settings 1. Connect to SQL Server 2008 Instance using SQL Server Management Studio 2. In the Object Explorer, Click on Management > Policy Management and you will be able to see Policies, Conditions & Facets as child nodes 3. Right click Policies and then select New Policy…. from the drop down list as shown in the snippet below to open the  Create New Policy Popup window. 4. In the Create New Policy popup window you need to provide the name of the policy as “Implementing and Verify Database Settings for Production Databases” and then click the drop down list under Check Condition. As highlighted in the snippet below click on the New Condition… option to open up the Create New Condition window. 5. In the Create New Condition popup window you need to provide the name of the condition as “Verify and Change Database Settings”. In the Facet drop down list you need to choose the Facet as Database Options as shown in the snippet below. Under Expression you need to select Field value as @AutoClose and then choose Operator value as ‘ = ‘ and finally choose Value as False. Now that you have successfully added the first field you can now go ahead and add rest of the fields as shown in the snippet below. Once you have successfully added all the above shown fields of Database Options Facet, click OK to save the changes and to return to the parent Create New Policy – Implementing and Verify Database Settings for Production Database windows where you will see that the newly created condition “Verify and Change Database Settings” is selected by default. Continues…

    Read the article

  • Silverlight Cream for January 13, 2011 -- #1026

    - by Dave Campbell
    In this Issue: András Velvárt, Tony Champion, Joost van Schaik, Jesse Liberty, Shawn Wildermuth, John Papa, Michael Crump, Sacha Barber, Alex Knight, Peter Kuhn, Senthil Kumar, Mike Hole, and WindowsPhoneGeek. Above the Fold: Silverlight: "Create Custom Speech Bubbles in Silverlight." Michael Crump WP7: "Architecting WP7 - Part 9 of 10: Threading" Shawn Wildermuth Expression Blend: "PathListBox: Text on the path" Alex Knight From SilverlightCream.com: Behaviors for accessing the Windows Phone 7 MarketPlace and getting feedback András Velvárt shares almost insider information about how to get some user interaction with your WP7 app in the form of feedback ... he has 4 behaviors taken straight from his very cool SufCube app that he's sharing. Reloading a Collection in the PivotViewer Tony Champion keeps working with the PivotViewer ... this time discussing the fact that you can't Reload or Refresh the current collection from the server ... at least not initially, but he did find one :) Tombstoning MVVMLight ViewModels with SilverlightSerializer on Windows Phone 7 Joost van Schaik takes a shot at helping us all with Tombstoning a WP7 app... he's using Mike Talbot's SilverlightSerializer and created extension methods for it for tombstoning that he's willing to share with us. Windows Phone From Scratch #17: MVVM Light Toolkit Soup To Nuts Part 2 Jesse Liberty is up to Part 17 in his WP7 series, and this is the 2nd post on MVVMLight and WP7, and is digging into behaviors. Architecting WP7 - Part 9 of 10: Threading Shawn Wildermuth is up to part 9 of 10 in his series on Architecting WP7 apps. This episode finds Shawn discussing Threading ... know how to use and choose between BackgroundWorker and ThreadPool? ... Shawn will explain. Silverlight TV 57: Performance Tuning Your Apps In the latest Silverlight TV, John Papa chats with Mike Cook about tuning your Silverlight app to get the performance up there where your users will be happy. Create Custom Speech Bubbles in Silverlight. Michael Crump's already gotten a lot of airplay out of this, but it's so cool.. comic-style callout shapes without using the dlls that you normally would... in other words, paths, and very cool hand-drawn looks on some too... very cool, Michael! Showcasing Cinch MVVM framework / PRISM 4 interoperability Sacha Barber has a post up on CodeProject that demonstratest using Cinch and Prism4 together... handily using MEF since Cinch relies on MEFedMVVM... this is a heck of a post... lots of code, lots of explanations. PathListBox: Text on the path Alex Knight keeps making this PathListBox series better ... this time he is putting text on the path... moving text... too cool, Alex! Windows Phone 7: Pinch Gesture Sample Peter Kuhn digs into the WP7 toolkit and examines GestureListener, pinch events, and clipping... examples and code supplied. How to change the StartPage of the Windows Phone 7 Application in Visual Studio 2010 ? Senthil Kumar discusses how to change the StartPage of your WP7 app, or get the program running if you happen to move or rename MainPage.xaml WP7 Text Boxes – OnEnter (my 1st Behaviour) Mike Hole has a post up about the issue with the keyboard appearing in front of the textbox, and maybe using the enter key to drop it... and he's developed a behavior for that process. WP7 ContextMenu in depth | Part1: key concepts and API WindowsPhoneGeek has some good articles that I haven't posted, but I'll catch up. This one is a nice tutorial on the WP7 Context menu... good explanation, diagrams, and code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • How to develop RPG Damage Formulas?

    - by user127817
    I'm developing a classical 2d RPG (in a similar vein to final fantasy) and I was wondering if anyone had some advice on how to do damage formulas/links to resources/examples? I'll explain my current setup. Hopefully I'm not overdoing it with this question, and I apologize if my questions is too large/broad My Characters stats are composed of the following: enum Stat { HP = 0, MP = 1, SP = 2, Strength = 3, Vitality = 4, Magic = 5, Spirit = 6, Skill = 7, Speed = 8, //Speed/Agility are the same thing Agility = 8, Evasion = 9, MgEvasion = 10, Accuracy = 11, Luck = 12, }; Vitality is basically defense to physical attacks and spirit is defense to magic attacks. All stats have fixed maximums (9999 for HP, 999 for MP/SP and 255 for the rest). With abilities, the maximums can be increased (99999 for HP, 9999 for HP/SP, 999 for the rest) with typical values (at level 100) before/after abilities+equipment+etc will be 8000/20,000 for HP, 800/2000 for SP/MP, 180/350 for other stats Late game Enemy HP will typically be in the lower millions (with a super boss having the maximum of ~12 million). I was wondering how do people actually develop proper damage formulas that scale correctly? For instance, based on this data, using the damage formulas for Final Fantasy X as a base looked very promising. A full reference here http://www.gamefaqs.com/ps2/197344-final-fantasy-x/faqs/31381 but as a quick example: Str = 127, 'Attack' command used, enemy Def = 34. 1. Physical Damage Calculation: Step 1 ------------------------------------- [{(Stat^3 ÷ 32) + 32} x DmCon ÷16] Step 2 ---------------------------------------- [{(127^3 ÷ 32) + 32} x 16 ÷ 16] Step 3 -------------------------------------- [{(2048383 ÷ 32) + 32} x 16 ÷ 16] Step 4 --------------------------------------------------- [{(64011) + 32} x 1] Step 5 -------------------------------------------------------- [{(64043 x 1)}] Step 6 ---------------------------------------------------- Base Damage = 64043 Step 7 ----------------------------------------- [{(Def - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------ [{(34 - 280.4)^2} ÷ 110] + 16 Step 9 ------------------------------------------------- [(-246)^2) ÷ 110] + 16 Step 10 ---------------------------------------------------- [60516 ÷ 110] + 16 Step 11 ------------------------------------------------------------ [550] + 16 Step 12 ---------------------------------------------------------- DefNum = 566 Step 13 ---------------------------------------------- [BaseDmg * DefNum ÷ 730] Step 14 --------------------------------------------------- [64043 * 566 ÷ 730] Step 15 ------------------------------------------------------ [36248338 ÷ 730] Step 16 ------------------------------------------------- Base Damage 2 = 49655 Step 17 ------------ Base Damage 2 * {730 - (Def * 51 - Def^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ---------------------- 49655 * {730 - (34 * 51 - 34^2 ÷ 11) ÷ 10} ÷ 730 Step 19 ------------------------- 49655 * {730 - (1734 - 1156 ÷ 11) ÷ 10} ÷ 730 Step 20 ------------------------------- 49655 * {730 - (1734 - 105) ÷ 10} ÷ 730 Step 21 ------------------------------------- 49655 * {730 - (1629) ÷ 10} ÷ 730 Step 22 --------------------------------------------- 49655 * {730 - 162} ÷ 730 Step 23 ----------------------------------------------------- 49655 * 568 ÷ 730 Step 24 -------------------------------------------------- Final Damage = 38635 I simply modified the dividers to include the attack rating of weapons and the armor rating of armor. Magic Damage is calculated as follows: Mag = 255, Ultima is used, enemy MDef = 1 Step 1 ----------------------------------- [DmCon * ([Stat^2 ÷ 6] + DmCon) ÷ 4] Step 2 ------------------------------------------ [70 * ([255^2 ÷ 6] + 70) ÷ 4] Step 3 ------------------------------------------ [70 * ([65025 ÷ 6] + 70) ÷ 4] Step 4 ------------------------------------------------ [70 * (10837 + 70) ÷ 4] Step 5 ----------------------------------------------------- [70 * (10907) ÷ 4] Step 6 ------------------------------------ Base Damage = 190872 [cut to 99999] Step 7 ---------------------------------------- [{(MDef - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------- [{(1 - 280.4)^2} ÷ 110] + 16 Step 9 ---------------------------------------------- [{(-279.4)^2} ÷ 110] + 16 Step 10 -------------------------------------------------- [(78064) ÷ 110] + 16 Step 11 ------------------------------------------------------------ [709] + 16 Step 12 --------------------------------------------------------- MDefNum = 725 Step 13 --------------------------------------------- [BaseDmg * MDefNum ÷ 730] Step 14 --------------------------------------------------- [99999 * 725 ÷ 730] Step 15 ------------------------------------------------- Base Damage 2 = 99314 Step 16 ---------- Base Damage 2 * {730 - (MDef * 51 - MDef^2 ÷ 11) ÷ 10} ÷ 730 Step 17 ------------------------ 99314 * {730 - (1 * 51 - 1^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ------------------------------ 99314 * {730 - (51 - 1 ÷ 11) ÷ 10} ÷ 730 Step 19 --------------------------------------- 99314 * {730 - (49) ÷ 10} ÷ 730 Step 20 ----------------------------------------------------- 99314 * 725 ÷ 730 Step 21 -------------------------------------------------- Final Damage = 98633 The problem is that the formulas completely fall apart once stats start going above 255. In particular Defense values over 300 or so start generating really strange behavior. High Strength + Defense stats lead to massive negative values for instance. While I might be able to modify the formulas to work correctly for my use case, it'd probably be easier just to use a completely new formula. How do people actually develop damage formulas? I was considering opening excel and trying to build the formula that way (mapping Attack Stats vs. Defense Stats for instance) but I was wondering if there's an easier way? While I can't convey the full game mechanics of my game here, might someone be able to suggest a good starting place for building a damage formula? Thanks

    Read the article

  • It was worth the wait… Welcome Oracle GoldenGate 11g Release 2

    - by Irem Radzik
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} It certainly was worth the wait to meet Oracle GoldenGate 11gR2, because it is full of new features on multiple fronts. In fact, this release has the longest and strongest list of new features in Oracle GoldenGate’s history. The new release brings GoldenGate closer to the Oracle Database while expanding the support for global implementations and heterogeneous systems. It is more secure, more flexible, and faster. We announced the availability of Oracle GoldenGate 11gR2 via a press release. If you haven’t seen it yet, please check it out. As covered in this announcement, there are a variety of improvements in the product: Integrated Capture for Oracle Database: brings Oracle GoldenGate’s Capture process closer to the Oracle Database engine and enables support for Advanced Compression among other benefits. Enhanced Conflict Detection & Resolution, speeds and simplifies the conflict detection and resolution process for Active-Active deployments. Globalization, meaning Oracle GoldenGate can be deployed for databases that use multi-byte/Unicode character sets. Security and Performance Improvements, includes support Federal Information Protection Standard (FIPS). Increased Extensibility by kicking off actions based on an event record in the transaction log or in the Trail file. Integration with Oracle Enterprise Manager 12c , in addition to the Oracle GoldenGate Monitor product. Expanded Heterogeneity, including capture from IBM DB2 for i on iSeries (AS/400) and delivery to Postgres We will explain these new features in more detail at our upcoming launch webcast: Harness the Power of the New Release of Oracle GoldenGate 11g- (Sept 12 8am/10am PT) In addition to learning more about these new features, the webcast will allow you to ask your questions to product management via live Q&A section. So, I hope you will not miss this opportunity to explore the new release of Oracle GoldenGate 11g and see how it can deliver enterprise-class real-time data integration solutions.. I look forward to a great webcast to unveil GoldenGate’s new capabilities.

    Read the article

  • How to convert from amateur web app developer to professional web apper?

    - by Nilesh
    This is more of a practical question on web app development and deployment process. Here is some background information. I use PHP for server side scripting, javascript for client side. I use Netbeans and notepad++. I user Firefox and firebug for debugging and testing. The process I use is very amateurish, I code something in netbeans, something in notepad++ and since there is nothing to compile, I just refresh the firefox browser and test it. This is convenient and faster compared to the Java development enviornment where you would have to atleast compile and deploy the jar files before you could run them. I have been thinking of putting a formal process in my development and find it hard putting it together. There are so many things to do before you can deploy your final web app. I keep hearing jslint, compression, unit testing (selenium), Ant, YUI compressor etc but I am now looking for some steps that I can take to make me more organized. For e.g I use netbeans but don't use any projects within it. I directly update the files. I don't use any source control but use my Iomega backup that saves each save into a different version and at the end of the day I backup the dev directory to my Amazon s3 account. For me development environment is just a DEV directory, TEST is my intermediate stage and PROD is the final directory that gets pushed out to the server. But all these directories are in the same apache home. I have few php scripts that just copies the needed files into the production directory. Thats about it for my development approach. I know I am missing the following - Regression testing (manual or automated ??) - automated testing (selenium ??) - automated deployment (ANT ??) - source control (svn ??) - quality control (jslint ??) Can someone explain what are the missing steps and how to go about filling those steps in order to have more professional approach. I am looking for tools with example tutorials in streamlining the whole development to deployment stage. For me just getting a hang of database, server side and client side development all in synchronization was itself a huge accomplishment. And now I feel there is lot missing before you can produce quality web application. For e.g I see lot of mention about using automated testing but how to put in use with respect to javascript and php. How to use ANT for the deployment etc. Is this all too much for a single or two person development team? Is there a way to automate all the above so that I just keep coding in netbeans and then run a batch file that is configured once and run it everytime to produce the code in the production directory? Lot of these information is scattered on the web and here, if someone can guide I would be happy to consolidate here. Thank you for your patience :)

    Read the article

  • How to make the constructor for the following exercise in c++?

    - by user40630
    This is the exercise I?m trying to solve. It's from C++, How to program book from Deitel and it's my homework. (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. The problem I'm facing is that I don't know exactly how to make the constructor for the second class. See description commented in the code bellow. #include <iostream> #include <vector> using namespace std; /* * */ //Class card. No problems here. class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /*The problem begins here. This class should create(when and object for it is created) a copy of the vector deck, right? But how exactly are these vector cards be initialized? I'll explain better in the constructor definition bellow.*/ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //This is where I'm stuck. I can't figure out how to set each of the 52 cards of the vector deck to have a specific suit and face every one of them, by using only the constructor of the Card class. //What you see bellow was one of my attempts to solve this problem but I blocked pretty soon in the middle of it. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

    Read the article

  • Having fun with Reflection

    - by Nick Harrison
    I was once asked in a technical interview what I could tell them about Reflection.   My response, while a little tongue in cheek was that "I can tell you it is one of my favorite topics to talk about" I did get a laugh out of that and it was a great ice breaker.    Reflection may not be the answer for everything, but it often can be, or maybe even should be.     I have posted in the past about my favorite CopyTo method.   It can come in several forms and is often very useful.   I explain it further and expand on the basic idea here  The basic idea is to allow reflection to loop through the properties of two objects and synchronize the ones that are in common.   I love this approach for data binding and passing data across the layers in an application. Recently I have been working on a project leveraging Data Transfer Objects to pass data through WCF calls.   We won't go into how the architecture got this way, but in essence there is a partial duplicate inheritance hierarchy where there is a related Domain Object for each Data Transfer Object.     The matching objects do not share a common ancestor or common interface but they will have the same properties in common.    By passing the problems with this approach, let's talk about how Reflection and our friendly CopyTo could make the most of this bad situation without having to change too much. One of the problems is keeping the two sets of objects in synch.   For this particular project, the DO has all of the functionality and the DTO is used to simply transfer data back and forth.    Both sets of object have parallel hierarchies with the same properties being defined at the corresponding levels.   So we end with BaseDO,  BaseDTO, GenericDO, GenericDTO, ProcessAreaDO,  ProcessAreaDTO, SpecializedProcessAreaDO, SpecializedProcessAreaDTO, TableDo, TableDto. and so on. Without using Reflection and a CopyTo function, tremendous care and effort must be made to keep the corresponding objects in synch.    New properties can be added at any level in the inheritance and must be kept in synch at all subsequent layers.    For this project we have come up with a clever approach of calling a base GetDo or UpdateDto making sure that the same method at each level of inheritance is called.    Each level is responsible for updating the properties at that level. This is a lot of work and not keeping it in synch can create all manner of problems some of which are very difficult to track down.    The other problem is the type of code that this methods tend to wind up with. You end up with code like this: Transferable dto = new Transferable(); base.GetDto(dto); dto.OfficeCode = GetDtoNullSafe(officeCode); dto.AccessIndicator = GetDtoNullSafe(accessIndicator); dto.CaseStatus = GetDtoNullSafe(caseStatus); dto.CaseStatusReason = GetDtoNullSafe(caseStatusReason); dto.LevelOfService = GetDtoNullSafe(levelOfService); dto.ReferralComments = referralComments; dto.Designation = GetDtoNullSafe(designation); dto.IsGoodCauseClaimed = GetDtoNullSafe(isGoodCauseClaimed); dto.GoodCauseClaimDate = goodCauseClaimDate;       One obvious problem is that this is tedious code.   It is error prone code.    Adding helper functions like GetDtoNullSafe help out immensely, but there is still an easier way. We can bypass the tedious code, by pass the complex inheritance tricks, and reduce all of this to a single method in the base class. TransferObject dto = new TransferObject(); CopyTo (this, dto); return dto; In the case of this one project, such a change eliminated the need for 20% of the total code base and a whole class of unit test cases that made sure that all of the properties were in synch. The impact of such a change also needs to include the on going time savings and the improvements in quality that can arise from them.    Developers who are not worried about keeping the properties in synch across mirrored object hierarchies are freed to worry about more important things like implementing business requirements.

    Read the article

  • SQLUG Events - London/Edinburgh/Cardiff/Reading - Masterclass, NoSQL, TSQL Gotcha's, Replication, BI

    - by tonyrogerson
    We have acquired two additional tickets to attend the SQL Server Master Class with Paul Randal and Kimberly Tripp next Thurs (17th June), for a chance to win these coveted tickets email us ([email protected]) before 9pm this Sunday with the subject "MasterClass" - people previously entered need not worry - your still in with a chance. The winners will be announced Monday morning.As ever plenty going on physically, we've got dates for a stack of events in Manchester and Leeds, I'm looking at Birmingham if anybody has ideas? We are growing our online community with the Cuppa Corner section, to participate online remember to use the #sqlfaq twitter tag; for those wanting to get more involved in presenting and fancy trying it out we are always after people to do 1 - 5 minute SQL nuggets or Cuppa Corners (short presentations) at any of these User Group events - just email us [email protected] removing from this email list? Then just reply with remove please on the subject line.Kimberly Tripp and Paul Randal Master Class - Thurs, 17th June - LondonREGISTER NOW AND GET A SECOND REGISTRATION FREE*The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance.The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:>> Debunk many of the ingrained misconceptions around SQL Server's behaviour >> Show you disaster recovery techniques critical to preserving your company's life-blood - the data >> Explain how a common application design pattern can wreak havoc in the database >> Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Where: Radisson Edwardian Heathrow Hotel, LondonWhen: Thursday 17th June 2010*REGISTER TODAY AT www.regonline.co.uk/kimtrippsql on the registration form simply quote discount code: BOGOF for both yourself and your colleague and you will save 50% off each registration – that’s a 249 GBP saving! This offer is limited, book early to avoid disappointment.Wed, 23 JunREADINGEvening Meeting, More info and registerIntroduction to NoSQL (Not Only SQL) - Gavin Payne; T-SQL Gotcha's and how to avoid them - Ashwani Roy; Introduction to Recency Frequency - Tony Rogerson; Reporting Services - Tim LeungThu, 24 JunCARDIFFEvening Meeting, More info and registerAlex Whittles of Purple Frog Systems talks about Data warehouse design case studies, Other BI related session TBC Mon, 28 JunEDINBURGHEvening Meeting, More info and registerReplication (Components, Adminstration, Performance and Troubleshooting) - Neil Hambly Server Upgrades (Notes and Best practice from the field) - Satya Jayanty Wed, 14 JulLONDONEvening Meeting, More info and registerMeeting is being sponsored by DBSophic (http://www.dbsophic.com/download), database optimisation software. Physical Join Operators in SQL Server - Ami LevinWorkload Tuning - Ami LevinSQL Server and Disk IO (File Groups/Files, SSD's, Fusion-IO, In-RAM DB's, Fragmentation) - Tony RogersonComplex Event Processing - Allan MitchellMany thanks,Tony Rogerson, SQL Server MVPUK SQL Server User Grouphttp://sqlserverfaq.com"

    Read the article

  • how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

    - by Ayesha Ahmad
    i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

    Read the article

  • Design suggestions needed to create a MathBuilder framework

    - by Darf Zon
    Let explain what I'm trying to create. I'm creating a framework, the idea is to provide base classes to generate a math problem. Why do I need this framework? Because at first time, I realized when I create a new math problem I always do the same steps. Configuration settings such range numbers. For example if I'm developing multiplications, in beginner level only generate the first number between 2-5 or in advanced level, the first number will be between 6- 9, for example. Generate problem method. All the time I need to invoke a method like this to generate the problem. This one receives the configuration settings and generate the number according to them. And generate the object with the respective data. Validate the problem. Sometimes the problem generated is not valid. For example, supposed I'm creating fractions in most simplified, if I receive 2/4, the program should detect that this is not valid and must generate another like this one, 1/4. Load the view. All of them, have a custom view (please watch below the images). All of the problems must know how to CHECK if the user result is correct. All of this problems has answers. Some of them just require one answer, anothers may require more than one, so I guess a way to maintain flexibility to the developer has all the answers he wanna used. At the beginning I started using PRISM. Generate modules for each math problem was the idea and load it in the main system. I guess are the most important things of this idea. Let me showing some problems which I create in a WPF standalone program. Here I have a math problem about areas. When I generate the problem a set to the view the object and it draw it. In beginner level, I set in the configuration settings that just load square types. But in advance level, can load triangles and squares randomly. In this another, generate a binary problem like addition, subtraction, multiplication or division. Above just generate a single problem. The idea of this is to show a test o quiz, I mean get a worksheet (this I call as a collection of problems) where the user can answer it. I hope gets the idea with my ugly drawing. How to load this math problems? As I said above, I started using PRISM, and each module contains a math problem kind. This is a snapshot of my first demo. Below show the modules loaded, and center the respective configurations or levels. Until momment, I have no idea to start creating this software. I just know that I need a question | problem class, response class, user class. But I get lost about what properties should have to contain in it. Please give a little hand of this framework. I put much effort on this question, so if any isn't clear, let me know to clarify it.

    Read the article

  • Starting to create a MathBuilder framework, help to start creating the design

    - by Darf Zon
    Let explain what I'm trying to create. I'm creating a framework, the idea is to provide base classes to generate a math problem. Why do I need this framework? Because at first time, I realized when I create a new math problem I always do the same steps. Configuration settings such range numbers. For example if I'm developing multiplications, in beginner level only generate the first number between 2-5 or in advanced level, the first number will be between 6- 9, for example. Generate problem method. All the time I need to invoke a method like this to generate the problem. This one receives the configuration settings and generate the number according to them. And generate the object with the respective data. Validate the problem. Sometimes the problem generated is not valid. For example, supposed I'm creating fractions in most simplified, if I receive 2/4, the program should detect that this is not valid and must generate another like this one, 1/4. Load the view. All of them, have a custom view (please watch below the images). All of the problems must know how to CHECK if the user result is correct. All of this problems has answers. Some of them just require one answer, anothers may require more than one, so I guess a way to maintain flexibility to the developer has all the answers he wanna used. At the beginning I started using PRISM. Generate modules for each math problem was the idea and load it in the main system. I guess are the most important things of this idea. Let me showing some problems which I create in a WPF standalone program. Here I have a math problem about areas. When I generate the problem a set to the view the object and it draw it. In beginner level, I set in the configuration settings that just load square types. But in advance level, can load triangles and squares randomly. In this another, generate a binary problem like addition, subtraction, multiplication or division. Above just generate a single problem. The idea of this is to show a test o quiz, I mean get a worksheet (this I call as a collection of problems) where the user can answer it. I hope gets the idea with my ugly drawing. How to load this math problems? As I said above, I started using PRISM, and each module contains a math problem kind. This is a snapshot of my first demo. Below show the modules loaded, and center the respective configurations or levels. Until momment, I have no idea to start creating this software. I just know that I need a question | problem class, response class, user class. But I get lost about what properties should have to contain in it. Please give a little hand of this framework. I put much effort on this question, so if any isn't clear, let me know to clarify it.

    Read the article

  • St. Louis ALT.NET

    - by Brian Schroer
    I’m a huge fan of the St. Louis .NET User Group and a regular attendee of their meetings, but always wished there was a local group that discussed more advanced .NET topics. (That’s not a criticism of the group - I appreciate that they want to server developers with a broad range of skill levels). That’s why I was thrilled when Nicholas Cloud started a St. Louis ALT.NET group in 2010. Here’s the “about us” statement from the group’s web site: The ALT.NET community is a loosely coupled, highly cohesive group of like-minded individuals who believe that the best developers do not align themselves with platforms and languages, but with principles and ideas. In 2007, David Laribee created the term "ALT.NET" to explain this "alternative" view of the Microsoft development universe--a view that challenged the "Microsoft-only" approach to software development. He distilled his thoughts into four key developer characteristics which form the basis of the ALT.NET philosophy: You're the type of developer who uses what works while keeping an eye out for a better way. You reach outside the mainstream to adopt the best of any community: Open Source, Agile, Java, Ruby, etc. You're not content with the status quo. Things can always be better expressed, more elegant and simple, more mutable, higher quality, etc. You know tools are great, but they only take you so far. It's the principles and knowledge that really matter. The best tools are those that embed the knowledge and encourage the principles (e.g. Resharper.) The St. Louis ALT.NET meetup group is a place where .NET developers can learn, share, and critique approaches to software development on the .NET stack. We cater to the highest common denominator, not the lowest, and want to help all St. Louis .NET developers achieve a superior level of software craftsmanship. I don’t see a lot of ALT.NET talk in blogs these days. The movement was harmed early on by the negative attitudes of some of its early leaders, including jerk moves like the Entity Framework “vote of no confidence”, but I do see occasional mentions of local groups like the St. Louis one. I think ALT.NET has been successful at bringing some of its ideas into the .NET world, including heavily influencing ASP.NET MVC and raising the general level of software craftsmanship for developers working on the Microsoft stack. The ideas and ideals live on, they’re just not branded as “this is ALT.NET!” In the past 18 months, St. Louis ALT.NET meetups have discussed topics like: NHibernate F# and other functional languages AOP CoffeeScript “How Ruby Is Making Me a Stronger C# Developer” Using rake for builds CQRS .NET dynamic programming micro web frameworks – Nancy & Jessica Git ALT.NET doesn’t mean (to me, anyway) “alternatives to .NET”, but “alternatives for .NET”. We look at how things are done in Ruby and other languages/platforms, but always with the idea “What can I learn from this to take back to my “day job” with .NET?”. Meetings are held at 7PM on the fourth Wednesday of each month at the offices of Professional Employment Group. PEG is located at 999 Executive Parkway (Suite 100 – lower level) in Creve Coeur (South of Olive off of Mason Road - Here's a map). Food is not supplied (sorry if you’re a big fan of the Papa John’s Crust-Lovers’ Pizza that’s a staple of user group meetings), but attendees are encouraged to come early and bring/share beer, so that’s cool. Thanks to Nick for organizing, and to Professional Employment Group for lending their offices. Please visit the meetup site for more information.

    Read the article

  • Fastest pathfinding for static node matrix

    - by Sean Martin
    I'm programming a route finding routine in VB.NET for an online game I play, and I'm searching for the fastest route finding algorithm for my map type. The game takes place in space, with thousands of solar systems connected by jump gates. The game devs have provided a DB dump containing a list of every system and the systems it can jump to. The map isn't quite a node tree, since some branches can jump to other branches - more of a matrix. What I need is a fast pathfinding algorithm. I have already implemented an A* routine and a Dijkstra's, both find the best path but are too slow for my purposes - a search that considers about 5000 nodes takes over 20 seconds to compute. A similar program on a website can do the same search in less than a second. This website claims to use D*, which I have looked into. That algorithm seems more appropriate for dynamic maps rather than one that does not change - unless I misunderstand it's premise. So is there something faster I can use for a map that is not your typical tile/polygon base? GBFS? Perhaps a DFS? Or have I likely got some problem with my A* - maybe poorly chosen heuristics or movement cost? Currently my movement cost is the length of the jump (the DB dump has solar system coordinates as well), and the heuristic is a quick euclidean calculation from the node to the goal. In case anyone has some optimizations for my A*, here is the routine that consumes about 60% of my processing time, according to my profiler. The coordinateData table contains a list of every system's coordinates, and neighborNode.distance is the distance of the jump. Private Function findDistance(ByVal startSystem As Integer, ByVal endSystem As Integer) As Integer 'hCount += 1 'If hCount Mod 0 = 0 Then 'Return hCache 'End If 'Initialize variables to be filled Dim x1, x2, y1, y2, z1, z2 As Integer 'LINQ queries for solar system data Dim systemFromData = From result In jumpDataDB.coordinateDatas Where result.systemId = startSystem Select result.x, result.y, result.z Dim systemToData = From result In jumpDataDB.coordinateDatas Where result.systemId = endSystem Select result.x, result.y, result.z 'LINQ execute 'Fill variables with solar system data for from and to system For Each solarSystem In systemFromData x1 = (solarSystem.x) y1 = (solarSystem.y) z1 = (solarSystem.z) Next For Each solarSystem In systemToData x2 = (solarSystem.x) y2 = (solarSystem.y) z2 = (solarSystem.z) Next Dim x3 = Math.Abs(x1 - x2) Dim y3 = Math.Abs(y1 - y2) Dim z3 = Math.Abs(z1 - z2) 'Calculate distance and round 'Dim distance = Math.Round(Math.Sqrt(Math.Abs((x1 - x2) ^ 2) + Math.Abs((y1 - y2) ^ 2) + Math.Abs((z1 - z2) ^ 2))) Dim distance = firstConstant * Math.Min(secondConstant * (x3 + y3 + z3), Math.Max(x3, Math.Max(y3, z3))) 'Dim distance = Math.Abs(x1 - x2) + Math.Abs(z1 - z2) + Math.Abs(y1 - y2) 'hCache = distance Return distance End Function And the main loop, the other 30% 'Begin search While openList.Count() != 0 'Set current system and move node to closed currentNode = lowestF() move(currentNode.id) For Each neighborNode In neighborNodes If Not onList(neighborNode.toSystem, 0) Then If Not onList(neighborNode.toSystem, 1) Then Dim newNode As New nodeData() newNode.id = neighborNode.toSystem newNode.parent = currentNode.id newNode.g = currentNode.g + neighborNode.distance newNode.h = findDistance(newNode.id, endSystem) newNode.f = newNode.g + newNode.h newNode.security = neighborNode.security openList.Add(newNode) shortOpenList(OLindex) = newNode.id OLindex += 1 Else Dim proposedG As Integer = currentNode.g + neighborNode.distance If proposedG < gValue(neighborNode.toSystem) Then changeParent(neighborNode.toSystem, currentNode.id, proposedG) End If End If End If Next 'Check to see if done If currentNode.id = endSystem Then Exit While End If End While If clarification is needed on my spaghetti code, I'll try to explain.

    Read the article

  • Stuck due to "knowing too much"

    - by Ran Biron
    Note more discussion at http://news.ycombinator.com/item?id=4037794 Welcome Hacker News Visitors! While HN is a fine forum for discussion and debate, Programmers - Stack Exchange is not. From the FAQ: If your motivation for asking the question is “I would like to participate in a discussion about ____”, then you should not be asking here. However, if your motivation is “I would like others to explain ____ to me”, then you are probably OK. (Discussions are of course welcome in our real time web chat.) Currently, this question is viewed by the membership of Programmers.SE as more likely to provoke unproductive discussion than constructive answers; while debates on its form and future are conducted, it will be locked to prevent arguments and vandalism. -- Shog9 I have a relatively simple development task, but every time I try to attack it, I end up spiraling in deep thoughts - how could it extending the future, what are the 2nd generation clients going to need, how does it affect "non functional" aspects (e.g. Performance, authorization...), how would it best be architectured to allow change... I remember myself a while ago, younger and, perhaps, more eager. The "me" I was then wouldn't have given a thought about all that - he would've gone ahead and wrote something, then rewrote it, then rewrote it again (and again...). The "me" today is more hesitant, more careful. I find it much easier today to sit and plan and instruct other people on how to do things than to actually go ahead and do them myself - not because I don't like to code - the opposite, I love to! - but because every time I sit at the keyboard, I end up in that same annoying place. Is this wrong? Is this a natural evolution, or did I drive myself into a rut? Fair disclosure - in the past I was a developer, today my job title is a "system architect". Good luck figuring what it means - but that's the title. Wow. I honestly didn't expect this question to generate that many responses. I'll try to sum it up. Reasons: Analysis paralysis / Over engineering / gold plating / (any other "too much thinking up-front can hurt you"). Too much experience for the given task. Not focusing on what's important. Not enough experience (and realizing that). Solutions (not matched to reasons): Testing first. Start coding (+ for fun) One to throw away (+ one API to throw away). Set time constraints. Strip away the fluff, stay with the stuff. Make flexible code (kinda opposite to "one to throw away", no?). Thanks to everyone - I think the major benefit here was to realize that I'm not alone in this experience. I have, actually, already started coding and some of the too-big things have fallen off, naturally. Since this question is closed, I'll accept the answer with most votes as of today. When/if it changes - I'll try to follow.

    Read the article

  • Big Data – Basics of Big Data Architecture – Day 4 of 21

    - by Pinal Dave
    In yesterday’s blog post we understood how Big Data evolution happened. Today we will understand basics of the Big Data Architecture. Big Data Cycle Just like every other database related applications, bit data project have its development cycle. Though three Vs (link) for sure plays an important role in deciding the architecture of the Big Data projects. Just like every other project Big Data project also goes to similar phases of the data capturing, transforming, integrating, analyzing and building actionable reporting on the top of  the data. While the process looks almost same but due to the nature of the data the architecture is often totally different. Here are few of the question which everyone should ask before going ahead with Big Data architecture. Questions to Ask How big is your total database? What is your requirement of the reporting in terms of time – real time, semi real time or at frequent interval? How important is the data availability and what is the plan for disaster recovery? What are the plans for network and physical security of the data? What platform will be the driving force behind data and what are different service level agreements for the infrastructure? This are just basic questions but based on your application and business need you should come up with the custom list of the question to ask. As I mentioned earlier this question may look quite simple but the answer will not be simple. When we are talking about Big Data implementation there are many other important aspects which we have to consider when we decide to go for the architecture. Building Blocks of Big Data Architecture It is absolutely impossible to discuss and nail down the most optimal architecture for any Big Data Solution in a single blog post, however, we can discuss the basic building blocks of big data architecture. Here is the image which I have built to explain how the building blocks of the Big Data architecture works. Above image gives good overview of how in Big Data Architecture various components are associated with each other. In Big Data various different data sources are part of the architecture hence extract, transform and integration are one of the most essential layers of the architecture. Most of the data is stored in relational as well as non relational data marts and data warehousing solutions. As per the business need various data are processed as well converted to proper reports and visualizations for end users. Just like software the hardware is almost the most important part of the Big Data Architecture. In the big data architecture hardware infrastructure is extremely important and failure over instances as well as redundant physical infrastructure is usually implemented. NoSQL in Data Management NoSQL is a very famous buzz word and it really means Not Relational SQL or Not Only SQL. This is because in Big Data Architecture the data is in any format. It can be unstructured, relational or in any other format or from any other data source. To bring all the data together relational technology is not enough, hence new tools, architecture and other algorithms are invented which takes care of all the kind of data. This is collectively called NoSQL. Tomorrow Next four days we will answer the Buzz Words – Hadoop. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Implementing a modern web application with Web API on top of old services

    - by Gaui
    My company has many WCF services which may or may not be replaced in the near future. The old web application is written in WebForms and communicates straight with these services via SOAP and returns DataTables. Now I am designing a new modern web application in a modern style, an AngularJS client which communicates with an ASP.NET Web API via JSON. The Web API then communicates with the WCF services via SOAP. In the future I want to let the Web API handle all requests and go straight to the database, but because the business logic implemented in the WCF services is complicated it's going to take some time to rewrite and replace it. Now to the problem: I'm trying to make it easy in the near future to replace the WCF services with some other data storage, e.g. another endpoint, database or whatever. I also want to make it easy to unit test the business logic. That's why I have structured the Web API with a repository layer and a service layer. The repository layer has a straight communication with the data storage (WCF service, database, or whatever) and the service layer then uses the repository (Dependency Injection) to get the data. It doesn't care where it gets the data from. Later on I can be in control and structure the data returned from the data storage (DataTable to POCO) and be able to test the logic in the service layer with some mock repository (using Dependency Injection). Below is some code to explain where I'm going with this. But my question is, does this all make sense? Am I making this overly complicated and could this be simplified in any way possible? Does this simplicity make this too complicated to maintain? My main goal is to make it as easy as possible to switch to another data storage later on, e.g. an ORM and be able to test the logic in the service layer. And because the majority of the business logic is implemented in these WCF services (and they return DataTables), I want to be in control of the data and the structure returned to the client. Any advice is greatly appreciated. Update 20/08/14 I created a repository factory, so services would all share repositories. Now it's easy to mock a repository, add it to the factory and create a provider using that factory. Any advice is much appreciated. I want to know if I'm making things more complicated than they should be. So it looks like this: 1. Repository Factory public class RepositoryFactory { private Dictionary<Type, IServiceRepository> repositories; public RepositoryFactory() { this.repositories = new Dictionary<Type, IServiceRepository>(); } public void AddRepository<T>(IServiceRepository repo) where T : class { if (this.repositories.ContainsKey(typeof(T))) { this.repositories.Remove(typeof(T)); } this.repositories.Add(typeof(T), repo); } public dynamic GetRepository<T>() { if (this.repositories.ContainsKey(typeof(T))) { return this.repositories[typeof(T)]; } throw new RepositoryNotFoundException("No repository found for " + typeof(T).Name); } } I'm not very fond of dynamic but I don't know how to retrieve that repository otherwise. 2. Repository and service // Service repository interface // All repository interfaces extend this public interface IServiceRepository { } // Invoice repository interface // Makes it easy to mock the repository later on public interface IInvoiceServiceRepository : IServiceRepository { List<Invoice> GetInvoices(); } // Invoice repository // Connects to some data storage to retrieve invoices public class InvoiceServiceRepository : IInvoiceServiceRepository { public List<Invoice> GetInvoices() { // Get the invoices from somewhere // This could be a WCF, a database, or whatever using(InvoiceServiceClient proxy = new InvoiceServiceClient()) { return proxy.GetInvoices(); } } } // Invoice service // Service that handles talking to a real or a mock repository public class InvoiceService { // Repository factory RepositoryFactory repoFactory; // Default constructor // Default connects to the real repository public InvoiceService(RepositoryFactory repo) { repoFactory = repo; } // Service function that gets all invoices from some repository (mock or real) public List<Invoice> GetInvoices() { // Query the repository return repoFactory.GetRepository<IInvoiceServiceRepository>().GetInvoices(); } }

    Read the article

  • SQL SERVER – Shard No More – An Innovative Look at Distributed Peer-to-peer SQL Database

    - by pinaldave
    There is no doubt that SQL databases play an important role in modern applications. In an ideal world, a single database can handle hundreds of incoming connections from multiple clients and scale to accommodate the related transactions. However the world is not ideal and databases are often a cause of major headaches when applications need to scale to accommodate more connections, transactions, or both. In order to overcome scaling issues, application developers often resort to administrative acrobatics, also known as database sharding. Sharding helps to improve application performance and throughput by splitting the database into two or more shards. Unfortunately, this practice also requires application developers to code transactional consistency into their applications. Getting transactional consistency across multiple SQL database shards can prove to be very difficult. Sharding requires developers to think about things like rollbacks, constraints, and referential integrity across tables within their applications when these types of concerns are best handled by the database. It also makes other common operations such as joins, searches, and memory management very difficult. In short, the very solution implemented to overcome throughput issues becomes a bottleneck in and of itself. What if database sharding was no longer required to scale your application? Let me explain. For the past several months I have been following and writing about NuoDB, a hot new SQL database technology out of Cambridge, MA. NuoDB is officially out of beta and they have recently released their first release candidate so I decided to dig into the database in a little more detail. Their architecture is very interesting and exciting because it completely eliminates the need to shard a database to achieve higher throughput. Each NuoDB database consists of at least three or more processes that enable a single database to run across multiple hosts. These processes include a Broker, a Transaction Engine and a Storage Manager.  Brokers are responsible for connecting client applications to Transaction Engines and maintain a global view of the network to keep track of the multiple Transaction Engines available at any time. Transaction Engines are in-memory processes that client applications connect to for processing SQL transactions. Storage Managers are responsible for persisting data to disk and serving up records to the Transaction Managers if they don’t exist in memory. The secret to NuoDB’s approach to solving the sharding problem is that it is a truly distributed, peer-to-peer, SQL database. Each of its processes can be deployed across multiple hosts. When client applications need to connect to a Transaction Engine, the Broker will automatically route the request to the most available process. Since multiple Transaction Engines and Storage Managers running across multiple host machines represent a single logical database, you never have to resort to sharding to get the throughput your application requires. NuoDB is a new pioneer in the SQL database world. They are making database scalability simple by eliminating the need for acrobatics such as sharding, and they are also making general administration of the database simpler as well.  Their distributed database appears to you as a user like a single SQL Server database.  With their RC1 release they have also provided a web based administrative console that they call NuoConsole. This tool makes it extremely easy to deploy and manage NuoDB processes across one or multiple hosts with the click of a mouse button. See for yourself by downloading NuoDB here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: NuoDB

    Read the article

  • SQL SERVER – Puzzle to Win Print Book – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY

    - by pinaldave
    Some time an interesting feature and smart audience makes total difference at places. From last two days, I have been writing on SQL Server 2012 feature FIRST_VALUE and LAST_VALUE. Please read following post before I continue today as this question is based on the same. Introduction to FIRST_VALUE and LAST_VALUE Introduction to FIRST_VALUE and LAST_VALUE with OVER clause As a comment of the second post I received excellent question from Nilesh Molankar. He asks what will happen if we change few things in the T-SQL. I really like this question as this kind of questions will make us sharp and help us perform in critical situation in need. We recently publish SQL Server Interview Questions book. I promise that in future version of this book, we will for sure include this question. Instead of repeating his question, I am going to ask something very similar to his question. Let us first run following query (read yesterday’s blog post for more detail): USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query. Now let us change the ORDER BY clause of OVER clause in above query and see what is the new result. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now let us see the result and ready for interesting question: Puzzle You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Hint Let me give you a simple hint. Just for simplicity I have changed the order of columns selected in the SELECT and ORDER BY (at the end). This will not change resultset but just order of the columns as well order of the rows. However, the data remains the same. USE AdventureWorks GO SELECT s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY OrderQty ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.OrderQty,s.SalesOrderID,s.SalesOrderDetailID GO Above query returns following result: Now I am very sure all of you have figured out the solution. Here is the second hint – pay attention to row 2, 3, 4, and 10. Hint2 T-SQL Enhancements: FIRST_VALUE() and LAST_VALUE() MSDN: FIRST_VALUE and LAST_VALUE Rules Leave a comment with your detailed answer by Nov 15′s blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • maintaining a growing, diverse codebase with continuous integration

    - by Nate
    I am in need of some help with philosophy and design of a continuous integration setup. Our current CI setup uses buildbot. When I started out designing it, I inherited (well, not strictly, as I was involved in its design a year earlier) a bespoke CI builder that was tailored to run the entire build at once, overnight. After a while, we decided that this was insufficient, and started exploring different CI frameworks, eventually choosing buildbot. One of my goals in transitioning to buildbot (besides getting to enjoy all the whiz-bang extras) was to overcome some of the inadequacies of our bespoke nightly builder. Humor me for a moment, and let me explain what I have inherited. The codebase for my company is almost 150 unique c++ Windows applications, each of which has dependencies on one or more of a dozen internal libraries (and many on 3rd party libraries as well). Some of these libraries are interdependent, and have depending applications that (while they have nothing to do with each other) have to be built with the same build of that library. Half of these applications and libraries are considered "legacy" and unportable, and must be built with several distinct configurations of the IBM compiler (for which I have written unique subclasses of Compile), and the other half are built with visual studio. The code for each compiler is stored in two separate Visual SourceSafe repositories (which I am simply handling using a bunch of ShellCommands, as there is no support for VSS). Our original nightly builder simply took down the source for everything, and built stuff in a certain order. There was no way to build only a single application, or pick a revision, or to group things. It would launched virtual machines to build a number of the applications. It wasn't very robust, it wasn't distributable. It wasn't terribly extensible. I wanted to be able to overcame all of these limitations in buildbot. The way I did this originally was to create entries for each of the applications we wanted to build (all 150ish of them), then create triggered schedulers that could build various applications as groups, and then subsume those groups under an overall nightly build scheduler. These could run on dedicated slaves (no more virtual machine chicanery), and if I wanted I could simply add new slaves. Now, if we want to do a full build out of schedule, it's one click, but we can also build just one application should we so desire. There are four weaknesses of this approach, however. One is our source tree's complex web of dependencies. In order to simplify config maintenace, all builders are generated from a large dictionary. The dependencies are retrieved and built in a not-terribly robust fashion (namely, keying off of certain things in my build-target dictionary). The second is that each build has between 15 and 21 build steps, which is hard to browse and look at in the web interface, and since there are around 150 columns, takes forever to load (think from 30 seconds to multiple minutes). Thirdly, we no longer have autodiscovery of build targets (although, as much as one of my coworkers harps on me about this, I don't see what it got us in the first place). Finally, aformentioned coworker likes to constantly bring up the fact that we can no longer perform a full build on our local machine (though I never saw what that got us, either, considering that it took three times as long as the distributed build; I think he is just paranoically phobic of ever breaking the build). Now, moving to new development, we are starting to use g++ and subversion (not porting the old repository, mind you - just for the new stuff). Also, we are starting to do more unit testing ("more" might give the wrong picture... it's more like any), and integration testing (using python). I'm having a hard time figuring out how to fit these into my existing configuration. So, where have I gone wrong philosophically here? How can I best proceed forward (with buildbot - it's the only piece of the puzzle I have license to work on) so that my configuration is actually maintainable? How do I address some of my design's weaknesses? What really works in terms of CI strategies for large, (possibly over-)complex codebases?

    Read the article

  • LINQ to Twitter Queries with LINQPad

    - by Joe Mayo
    LINQPad is a popular utility for .NET developers who use LINQ a lot.  In addition to standard SQL queries, LINQPad also supports other types of LINQ providers, including LINQ to Twitter.  The following sections explain how to set up LINQPad for making queries with LINQ to Twitter. LINQPad comes in a couple versions and this example uses LINQPad4, which runs on the .NET Framework 4.0. 1. The first thing you'll need to do is set up a reference to the LinqToTwitter.dll. From the Query menu, select query properties. Click the Browse button and find the LinqToTwitter.dll binary. You should see something similar to the Query Properties window below. 2. While you have the query properties window open, add the namespace for the LINQ to Twitter types.  Click the Additional Namespace Imports tab and type in LinqToTwitter. The results are shown below: 3. The default query type, when you first start LINQPad, is C# Expression, but you'll need to change this to support multiple statements.  Change the Language dropdown, on the Main window, to C# Statements. 4. To query LINQ to Twitter, instantiate a TwitterContext, by typing the following into the LINQPad Query window: var ctx = new TwitterContext(); Note: If you're getting syntax errors, go back and make sure you did steps #2 and #3 properly. 5. Next, add a query, but don't materialize it, like this: var tweets = from tweet in ctx.Status where tweet.Type == StatusType.Public select new { tweet.Text, tweet.Geo, tweet.User }; 6. Next, you want the output to be displayed in the LINQPad grid, so do a Dump, like this: tweets.Dump(); The following image shows the final results:   That was an unauthenticated query, but you can also perform authenticated queries with LINQ to Twitter's support of OAuth.  Here's an example that uses the PinAuthorizer (type this into the LINQPad Query window): var auth = new PinAuthorizer { Credentials = new InMemoryCredentials { ConsumerKey = "", ConsumerSecret = "" }, UseCompression = true, GoToTwitterAuthorization = pageLink => Process.Start(pageLink), GetPin = () => { // this executes after user authorizes, which begins with the call to auth.Authorize() below. Console.WriteLine("\nAfter you authorize this application, Twitter will give you a 7-digit PIN Number.\n"); Console.Write("Enter the PIN number here: "); return Console.ReadLine(); } }; // start the authorization process (launches Twitter authorization page). auth.Authorize(); var ctx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/"); var tweets = from tweet in ctx.Status where tweet.Type == StatusType.Public select new { tweet.Text, tweet.Geo, tweet.User }; tweets.Dump(); This code is very similar to what you'll find in the LINQ to Twitter downloadable source code solution, in the LinqToTwitterDemo project.  For obvious reasons, I changed the value assigned to ConsumerKey and ConsumerSecret, which you'll have to obtain by visiting http://dev.twitter.com and registering your application. One tip, you'll probably want to make this easier on yourself by creating your own DLL that encapsulates all of the OAuth logic and then call a method or property on you custom class that returns a fully functioning TwitterContext.  This will help avoid adding all this code every time you want to make a query. Now, you know how to set up LINQPad for LINQ to Twitter, perform unauthenticated queries, and perform queries with OAuth. Joe

    Read the article

  • Love and Hate Outlook autocomplete, Outlook 2010/Exchange 2010

    - by Kay Sellenrode
    I think that almost every Exchange admin can concur with me that the Outlook autocomplete cache is one of those things you love but at the same time also hate. Users mostly love this function, except when it fails.Luckily since Outlook 2010 things got a little better and we got rid of the dreaded nk2 files.Outlook 2010 now includes a folder named "Suggested Contacts", all users you send an email to and that don't already have an contact object are saved in this suggested contacts folder.A lot of people thought this folder is also the source for the autocomplete cache, which would make it somewhat easy to manage, I wish the solution was that easy.Badly enough separate from the suggested contacts, outlook still maintains a cache for the autocomplete function. Let us say you run in to the following situation: John works for company A and is a popular contact for almost everyone in your organization.Now John quit his job at Company A and moved to Company B.Luckily John maintains your company as customer, but his email address is now changed from companyA.com to companyB.comSince you don't want to do any business with Company A anymore, you want to make sure none of your users accidentally mail to his old address.Now this is where the real fun starts, cause almost all of your 1000 users have mailed at least once with John.Resulting in the fact that every user has John most probably listed in their autocomplete cache.  I have run into sort like situations multiple times with several customers, which is always a pain.And of course this blog post is the result of one of those issues once again.I knew that with the Suggested contacts we could do more than previously, but still never spent time on it before.But today I thought lets nail this now and forever!!  Ok let's start of that things are different for every combination of outlook and exchange.I explain the procedure for Exchange 2010 SP1+ in combination with Outlook 2010.At first we want to get rid of all contact objects that contain [email protected] do this we need to be assigned to the RBAC role "Mailbox Import Export", which can be done through the Exchange Control panel.In my test environment I assigned this role to the Organization admins, but in real life you might want to add it to a custom role. Open the Exchange control panel by logging in to the ecp url, in my case https://ITFEX.itf.local/ECP, and make sure you selected your organization as management scope.Browse to Roles & Auditing, and open the properties for the organization management role group.click on the Add button to add a new role to the Organization Management role group, select the Mailbox Import Export role and click on add and OK to add it to the role.  Once you have assigned that role to your account you can open the Exchange Management Shell and execute the following command: Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –logonly –searchquery "kind:contact AND [email protected]" This command will create a list with all mailboxes and any contacts that were found with an email address that contains [email protected], this list is then posted in the mailbox you specified at your.account in the folder searchanddelete.Now examine the report that was created and posted in the mailbox to see if it matches what you think it should match.My results looked like this:  When you're confident that the search includes all references and no false positives you can execute almost the same command, but this time with an delete action instead of the logonly. Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –DeleteContent –searchquery "kind:contact AND [email protected]" Now most people would think this would remove the contact object from the suggested contacts, resulting in a removal from the autocomplete list.Sad but not true, to clean up the autocomplete list start Outlook with the command: "outlook /cleanautocompletecache" This will result in an empty cache, but luckily this is rebuild based on the suggested contacts, which now doesn't include the [email protected] contact anymore.

    Read the article

  • SQL SERVER – What are Actions in SSAS and How to Make a Reporting Action

    - by Pinal Dave
    Actions are used for customized browsing and drilling of data for the end-user. It’s an event that a user can raise while accessing the cube data. They are used in cube browsers like excel and are triggered when a user in a client tool clicks on a particular member, level, dimension, cells or may be the cube itself.  For example a user might be able to see a reporting services report, open a web page or drill through to detailed information related to the cube data. Analysis server supports 3 types of actions :- Report Drill-through Standard Actions In this blog post, I will explain the Reporting  action. The objective of this action is to return a report with details of the product where the sales amount is greater than 1000 in cube browser analysis. You need to create a basic cube first with the facts and dimensions you want in the analysis. Following are the steps to create reporting action. Go to SQL server data tools and open the analysis services project. Navigate to actions and click on new reporting action. 2.) Specify the name of the action and choose target type as attribute members since we have to create the action on members for a attribute. 3.) Specify the Target object of your report action. Target object would be the dimension or attribute on which you want the report to appear. In our case it is product name. 4.) Next you have to define the condition on which you want the report link to appear. However, this is an optional feature. In this example we are specifying a condition, which will check if the sales amount is greater than 10,000. So, that the link appears only for those products where the defined condition is met. 5.) Next you have to specify the server name on which the report is present, report path  and the report format in which you want the report to appear. 6.) Additionally you can specify the parameters. As with conditional expression, the parameters should be a valid MDX expression. The parameter name should be same as the one defined in the report. 7.) Deploy your solution after you are done with specifying parameters and go to the cube browser. 8.) Click on the analyze in excel button, this will open your cube in excel 9.) Make an analysis which shows product names and their sales amount. 10.) Right click on a product where sales amount is greater than 10000 you will see the reporting action link. Click on that and you will be taken to your reporting services report. 11.) Clicking on the link will take you to the URL of the report. I created this report using report project wizard in SQL server data tools. So, this is how we can launch reports from a cube browser. Similarly you can open web pages, run applications and a number of  other tasks. Koenig Solutions offers SSAS training which contains all Analysis Services including Reporting in great detail. In my next blog post I will talk about drill-through actions. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

    Read the article

  • How to develop RPG Damage Formulas?

    - by user127817
    I'm developing a classical 2d RPG (in a similar vein to final fantasy) and I was wondering if anyone had some advice on how to do damage formulas/links to resources/examples? I'll explain my current setup. Hopefully I'm not overdoing it with this question, and I apologize if my questions is too large/broad My Characters stats are composed of the following: enum Stat { HP = 0, MP = 1, SP = 2, Strength = 3, Vitality = 4, Magic = 5, Spirit = 6, Skill = 7, Speed = 8, //Speed/Agility are the same thing Agility = 8, Evasion = 9, MgEvasion = 10, Accuracy = 11, Luck = 12, }; Vitality is basically defense to physical attacks and spirit is defense to magic attacks. All stats have fixed maximums (9999 for HP, 999 for MP/SP and 255 for the rest). With abilities, the maximums can be increased (99999 for HP, 9999 for HP/SP, 999 for the rest) with typical values (at level 100) before/after abilities+equipment+etc will be 8000/20,000 for HP, 800/2000 for SP/MP, 180/350 for other stats Late game Enemy HP will typically be in the lower millions (with a super boss having the maximum of ~12 million). I was wondering how do people actually develop proper damage formulas that scale correctly? For instance, based on this data, using the damage formulas for Final Fantasy X as a base looked very promising. A full reference here http://www.gamefaqs.com/ps2/197344-final-fantasy-x/faqs/31381 but as a quick example: Str = 127, 'Attack' command used, enemy Def = 34. 1. Physical Damage Calculation: Step 1 ------------------------------------- [{(Stat^3 ÷ 32) + 32} x DmCon ÷16] Step 2 ---------------------------------------- [{(127^3 ÷ 32) + 32} x 16 ÷ 16] Step 3 -------------------------------------- [{(2048383 ÷ 32) + 32} x 16 ÷ 16] Step 4 --------------------------------------------------- [{(64011) + 32} x 1] Step 5 -------------------------------------------------------- [{(64043 x 1)}] Step 6 ---------------------------------------------------- Base Damage = 64043 Step 7 ----------------------------------------- [{(Def - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------ [{(34 - 280.4)^2} ÷ 110] + 16 Step 9 ------------------------------------------------- [(-246)^2) ÷ 110] + 16 Step 10 ---------------------------------------------------- [60516 ÷ 110] + 16 Step 11 ------------------------------------------------------------ [550] + 16 Step 12 ---------------------------------------------------------- DefNum = 566 Step 13 ---------------------------------------------- [BaseDmg * DefNum ÷ 730] Step 14 --------------------------------------------------- [64043 * 566 ÷ 730] Step 15 ------------------------------------------------------ [36248338 ÷ 730] Step 16 ------------------------------------------------- Base Damage 2 = 49655 Step 17 ------------ Base Damage 2 * {730 - (Def * 51 - Def^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ---------------------- 49655 * {730 - (34 * 51 - 34^2 ÷ 11) ÷ 10} ÷ 730 Step 19 ------------------------- 49655 * {730 - (1734 - 1156 ÷ 11) ÷ 10} ÷ 730 Step 20 ------------------------------- 49655 * {730 - (1734 - 105) ÷ 10} ÷ 730 Step 21 ------------------------------------- 49655 * {730 - (1629) ÷ 10} ÷ 730 Step 22 --------------------------------------------- 49655 * {730 - 162} ÷ 730 Step 23 ----------------------------------------------------- 49655 * 568 ÷ 730 Step 24 -------------------------------------------------- Final Damage = 38635 I simply modified the dividers to include the attack rating of weapons and the armor rating of armor. Magic Damage is calculated as follows: Mag = 255, Ultima is used, enemy MDef = 1 Step 1 ----------------------------------- [DmCon * ([Stat^2 ÷ 6] + DmCon) ÷ 4] Step 2 ------------------------------------------ [70 * ([255^2 ÷ 6] + 70) ÷ 4] Step 3 ------------------------------------------ [70 * ([65025 ÷ 6] + 70) ÷ 4] Step 4 ------------------------------------------------ [70 * (10837 + 70) ÷ 4] Step 5 ----------------------------------------------------- [70 * (10907) ÷ 4] Step 6 ------------------------------------ Base Damage = 190872 [cut to 99999] Step 7 ---------------------------------------- [{(MDef - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------- [{(1 - 280.4)^2} ÷ 110] + 16 Step 9 ---------------------------------------------- [{(-279.4)^2} ÷ 110] + 16 Step 10 -------------------------------------------------- [(78064) ÷ 110] + 16 Step 11 ------------------------------------------------------------ [709] + 16 Step 12 --------------------------------------------------------- MDefNum = 725 Step 13 --------------------------------------------- [BaseDmg * MDefNum ÷ 730] Step 14 --------------------------------------------------- [99999 * 725 ÷ 730] Step 15 ------------------------------------------------- Base Damage 2 = 99314 Step 16 ---------- Base Damage 2 * {730 - (MDef * 51 - MDef^2 ÷ 11) ÷ 10} ÷ 730 Step 17 ------------------------ 99314 * {730 - (1 * 51 - 1^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ------------------------------ 99314 * {730 - (51 - 1 ÷ 11) ÷ 10} ÷ 730 Step 19 --------------------------------------- 99314 * {730 - (49) ÷ 10} ÷ 730 Step 20 ----------------------------------------------------- 99314 * 725 ÷ 730 Step 21 -------------------------------------------------- Final Damage = 98633 The problem is that the formulas completely fall apart once stats start going above 255. In particular Defense values over 300 or so start generating really strange behavior. High Strength + Defense stats lead to massive negative values for instance. While I might be able to modify the formulas to work correctly for my use case, it'd probably be easier just to use a completely new formula. How do people actually develop damage formulas? I was considering opening excel and trying to build the formula that way (mapping Attack Stats vs. Defense Stats for instance) but I was wondering if there's an easier way? While I can't convey the full game mechanics of my game here, might someone be able to suggest a good starting place for building a damage formula? Thanks

    Read the article

  • ArchBeat Link-o-Rama Top 10 for November 4-10, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the week of November 4-10, 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (the very prolific A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. Exploring Lambda Expressions for the Java Language and the JVM | Java Magazine In the latest //Java/Architect column in Java Magazine, Ben Evans, Martijn Verburg, and Trisha Gee explain how, "although Lambda expressions might seem unfamiliar to begin with, they're quite easy to pick up, and mastering them will be vital for writing applications that can take full advantage of modern multicore CPUs." SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger ADF Mobile Custom Javasciprt – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article...) Converting SSL certificate generated by a 3rd party to an Oracle Wallet | Paulo Albuquerque Oracle Fusion Middleware A-Team member Paulo Albuquerque shares "a workaround to get your private key, certificate and CA trusted certificates chain into Oracle Wallet." How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Updated Business Activity Monitoring (BAM) Class | Gary Barg Oracle SOA Team blogger Gary Barg has news for those interested in a skills upgrade. This updated Oracle University course "explains how to use Oracle BAM to monitor enterprise business activities across an enterprise in real time. You can measure your key performance indicators (KPIs), determine whether you are meeting service-level agreements (SLAs), and take corrective action in real time." Thought for the Day "For every complex problem, there is a solution that is simple, neat, and wrong." — H. L. Mencken (September 12, 1880 – January 29, 1956) Source: SoftwareQuotes.com

    Read the article

  • Silverlight Cream for May 27, 2010 -- #871

    - by Dave Campbell
    In this Issue: Phil Middlemiss, Max Paulousky, Jeff Wilcox, David Anson, René Schulte, Xianzhong Zhu, Jeff Handley, John Papa, Jeremy Likness, and Marlon Grech. Shoutouts: SilverLaw has a great demo at the Expression Gallery, and we're all going to look forward to the blog post explaining it: Flexible Surface Effect SilverLaw> has another use for the above in this text morphing Effect: Morphing Text Effect Matthias Shapiro contributed a chapter for a book on Visualization and it's available as a free download: Free Chapter From Beautiful Visualization Andy Beaulieu has a demo up as almost a spoiler for a future Coding4Fun app... and how cool is this: Shuffleboard: A Windows Phone 7 Sample Game From SilverlightCream.com: Separating Content and Presentation with the ContentControl Phil Middlemiss' latest is out on SilverlightShow and is all about the ContentControl and separating layout and content ... demo project source included Search Engine Optimization (SEO) for Silverlight Applications. Part 1 Max Paulousky has part one of a long series he's starting on a demo project to explain a bunch of MEF, MVVM, and WCF RIA concepts. This first one contains the overview and also discusses SEO. There is a link to the app and material in the post if you read Russian :) Updated Silverlight Unit Test Framework bits for Windows Phone and Silverlight 3 Jeff Wilcox has available updated Unit Test bits for Silverlight 3 -- read that as WP7... read the rest of the information on his post. Easily animate orientation changes for any Windows Phone application with this handy source code David Anson has some code up that you're going to want if you're programming WP7 ... just watch the video ... you'll be downloading the code just like I did :) SilverShader – Introduction to Silverlight and WPF Pixel Shaders René Schulte has a post up at Coding4Fun about PixelShaders... how to write them and an application that uses them... this is a great long tutorial... a must read. Developing Freecell Game Using Silverlight 3 Part 2 Xianzhong Zhu has part 2 of his FreeCell game development posted ... lots of detailed descriptions and code, plus all the code of course! Async Validation with RIA Services Jeff Handley has a post up that is sort of a follow-on to a year-old post on async validation with RIA services and DataForm and how it's all much easier now in SL4. Learning Blend with .toolbox (Silverlight TV #29) John Papa and Arturo Toledo discuss .toolbox in Silverlight TV #29 -- have you made yourself an avatar yet? ... well go get on-board with this great learning tool! Silverlight Out of Browser Dynamic Modules in Offline Mode OOB isn't difficult, dynamic modules can become a bit more, but what if you're OOB... ok what if you're OOB and offline? ... Jeremy Likness has a possible solution for this with an OfflineCatalog. MEFedMVVM v1.0 Explained Marlon Grech has a great into to MEFedMVVM in this post. If you're trying to get your head around MEF and MVVM in either WPF or Silverlight, here's a good starting point. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >