Search Results

Search found 10586 results on 424 pages for 'zend rest route'.

Page 246/424 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• ext4: error loading journal

  - by cloudyOutside

  I have an external hard drive with two partitions: A small FAT32 which is mostly empty and works fine and a large ext4 with tons of data, most of which isn't backed up. The ext4 is visible, but can't be mounted. I get an "error loading journal" error. The drive is a Western Digital Caviar Blue 500GB. Roughly 30GB of that is FAT32 and the rest is the ext4. The light on the enclosure turns red when reading from the bad partition. It was made by Cavalry. There wasn't any warning, but coincidentally, I've been thinking lately that I should get two large capacity drives for real backups. Is there anything that can be done? I'm not even sure I have enough storage to backup everything even if it is redeemable.

  Read the article

• Overriding Apache auth directive

  - by Machine

  Hi! I'm trying to allow public access to a method that generates a WSDL-file for our API. The rest of the site is behind basic auth protection. Can you guys take a look at the following virtual-host configuration and see why the override does not take place? <VirtualHost *:80> ServerName xyz.mydomain.com DocumentRoot /var/www/dev/public <Directory /var/www/dev/public> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all SetEnv APPLICATION_ENV testing </Directory> <Location /> AuthName "XYZ Development Server" AuthType Basic AuthUserFile /etc/apache2/xyz.passwd Require valid-user </Location> <Location /api/soap/wsdl> Satisfy Any allow from all </Location> </VirtualHost>

  Read the article

• Making a hidden truecrypt volume with existing data

  - by Bill Grey

  I have a 1TB hdd, which I would like to encrypt. I would like to make a hidden volume, with almost nothing within but some decoy data, and the rest in a hidden volume. However, my driver is over 95% full. Is it still possible to do this, or would it have to be done on an empty drive, and then copy the data over? I could not find the answer to this question in the documentation. Also, how easy would it be to undo, or unencrypt the drive? Would it again need another empty drive to begin with?

  Read the article

• Is C# WebAPI worth it? Can I use standart MVC4 to create my API?

  - by Steve

  I need to build a massive API and I'm trying out WebAPI instead of default MVC4 projects and it seems that it just makes things more difficult. Can have only 4 methods in controller Get, Post, Put, Delete, if I want more I need to modify route for that particular method FluentValidation won't work with WebAPI so I need to use DataAnnotations which I really don't want to. Can't use dynamic return data-types My question is: Would it really be that bad if I would use MVC4 project and use default ActionResults that return Json? What are real advantages of using WebAPI, why did they even made them in the first place if you can easily convert your project to API?

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  I am a programmer and sit at a computer ten hours a day - and even though the rest of me is nice and warm, my fingers are as cold as ice. Are there any gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad so that it vents hot air on the mouse - and that works. However it is not very practical, plus it only works for one hand (and not very well).

  Read the article

• How can I access form elements when using an ASP.NET MVC Ajax form?

  - by Patrick

  I've got an ajax form in an MVC 2 application. I cannot find the proper way to access the form elements within the Ajax form decleration. I can access the name of the elements with Request.Form.Keys but I can't access the actual values. I've read numerous examples of posting forms with jQuery but my form has elements created dynamically based on route values (sometimes it could be 2 text boxes sometimes 10, given unique names like so: <%= Html.TextBox("Evaluation"+Model.EvaluationId.ToString())) so I couldn't find a way to make that work with jQuery. Is there another way that I for elements can be accessed?

  Read the article

• Using Durable Services for saving wcf instances

  - by miker169

  I am currently creating a service which connects to a DAL and that can run a few stored procedures, one of the issues I am facing is that for certain times of the month, we can't update the database, (at the moment this is done manually. This is done via the user adding a note to their calendar) But I would like to automate this process, one of the possible solutions I can think of using is a durable service. When the date is lets say the 1st of the month, the Update/Insert/Delete instances can get saved to a database, and then ran after that date in a batch. Is this the intended use of durable services ? Is there a better route I could possibly take ?

  Read the article

• How do I pick a motherboard?

  - by EpsilonVector

  When building your own computer one part was always a mystery to me: the motherboard. Picking a CPU/GPU/memory is easy- you just figure out where the various chips are in the low end to high end scale, do a little market research on what current games demand, and pick the parts from their respective continuums of low-to-high-end models. A mother board is more complicated though. Its features are not as obvious as "this motherboard is faster than that motherboard". Now you need to deal with part compatibilities, bus speeds, maybe power management stuff, etc. I'm interested in a short guide for selecting a motherboard, especially- what pitfalls to avoid (for example, can bus speed become a bottleneck?). To clarify: I'm not looking for motherboard recommendations. I'm looking for guidance regarding how to evaluate the fitness of a motherboard given the rest of the computer parts.

  Read the article

• Windows folder encryption

  - by Razor

  My situation I know that bitlocker is meant to encrypt whole drives, but I have an hard drive that is already fully partitioned and containing data. I'd like to encrypt part of one partition, leaving the rest of the partition accessible. I would very much like to avoid programs like Norton partition magic (which resize/split partitions), because every time I used them I had problems with the data stored. Question Is there any way/builtin alternative/3rd party app that integrates with windows login to encrypt one subset of a partition? EDIT I heard horror stories about EFS, which is why I don't want to use it, unless there have been improvements on reliability with windows 8. Some highlights from that article: In fact I’ve only used EFS twice in the last ten years on my own computers and on both occasions I’ve lost files and documents. I therefore cannot recommend you ever encrypt your files with this Windows feature. Unfortunately, because of incompatibilities with some differing versions of EFS files can end up scrambled and unrecoverable.

  Read the article

• How to get IPv6 public address on Windows XP machine?

  - by SR Dusad

  C:\>netsh netsh>interface ipv6 netsh interface ipv6>show addres Querying active state... Interface 6: Local Area Connection 3 Addr Type DAD State Valid Life Pref. Life Address --------- ---------- ------------ ------------ ----------------------------- Temporary Preferred 6d23h38m55s 23h36m8s 2001:db8:1dde:1:6d16:9d1:b1ec:2245 Public Preferred 29d23h59m30s 6d23h59m30s 2001:db8:1dde:1:201:2ff:fe29:23b6 Link Preferred infinite infinite fe80::201:2ff:fe29:23b6 The books says, after IPv6 is enabled on Windows XP, auto configure will give it 3 addresses, a Link, a Public, and a Temporary one. But on my computer, I could only see Link, what was the problem? I used the Windows XP machine. But when I try it on Windows 2007 it works fine and show me a public address. How to get public IPv6 address from Windows XP machine? on my Windows XP machine IPv6 is enabled but when I use the command tracert6 www.kame.net it shows "No route to destination". Why?

  Read the article

• How to implement User routing like that in StackOverflow ?

  - by rockinthesixstring

  I've looked at the routing on StackOverflow and I've got a very noobie question, but something I'd like clarification none the less. I'm looking specifically at the Users controller http://stackoverflow.com/Users http://stackoverflow.com/Users/Login http://stackoverflow.com/Users/124069/rockinthesixstring What I'm noticing is that there is a "Users" controller probably with a default "Index" action, and a "Login" action. The problem I am facing is that the login action can be ignored and a "UrlParameter.Optional [ID]" can also be used. How exactly does this look in the RegisterRoutes collection? Or am I missing something totally obvious? EDIT: Here's the route I have currently.. but it's definitely far from right. routes.MapRoute( _ "Default", _ "{controller}/{id}/{slug}", _ New With {.controller = "Events", .action = "Index", .id = UrlParameter.Optional, .slug = UrlParameter.Optional} _ )

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  This might seem silly, and if there is no good and practical solution... I will live. I am a programmer and sit at a computer 10 hours a day - and even though the rest of me is nice and warm (at least warm), my fingers are cold as ice. Are there some gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad, so that it vents hot air on the mouse - and that works... But it is not very practical, plus it only works for one hand (and not very well). Tips?

  Read the article

• Configuring IIS site to use HTTPS

  - by James

  I am working on a REST API which I have currently deployed on a Win XP Professional SP2 development machine running IIS 5.1. The site is currently being hosted on port 81 and being accessed via HTTP. I would now like to configure the site to stop using HTTP and use HTTPS only. I have developed a self-signed certificate using the SelfSSL.exe tool from the 6.0 Resource Kit Tools and set the Common Name to be the IP of my server (as it's a local development machine it has no domain name). I have also already configured the site to use SSL using the How To Set Up an HTTPS Service in IIS tutorial as my guide. However, whenever I try to access a resource in the API via HTTPS I get a 404. Any ideas?

  Read the article

• asterisk incoming/miss call notification (to skype)

  - by tike

  My environment: Centos 5.6, Asterisk with freepbx , skype i.e.sends message with parameter skype.sh skype_user message. Now i wanted to send skype notification so that my asterisk server notification are sent to skype rather than email (or to both skype and email). I know, there is voicemail.conf, voicemail_general and vm_email.inc, which has these body created. vm_email.inc emailbody=${VM_NAME},\n\nThere is a new voicemail in mailbox ${VM_MAILBOX} But i dont see where is something like "mail" command. What my thought to do is: instead of saying "mailcmd" pass system ( /path/to/script) and it would simply send message as rest is already configured. Any suggestion where i could run script rather than sending email Or Executing script on every incoming call, so that i could send as notification on every call over the Skype. (however, ultimate goal is to achieve miss call notification or voice mail notification over Skype.)

  Read the article

• Word: MAC 2011, TOC on too many pages

  - by Mark

  I have a Word: MAC 2011 document where the bottom of the first 40 pages or so say "TOC: Page x". This notation appears to be in the Footer, as it is gray until I click on it (then the rest of the text goes gray instead). There is no TOC that I can see in the document, so I'm presuming someone tried to create one and messed things up. After the first 40 pages or so, all the other bottom of the page notations appear to be correct. (i.e. Chapter One, Chapter Two, etc.) How can I get those first 40 pages to be part of Chapter One rather than TOC?

  Read the article

• Scale div in an upwards direction, instead of down?

  - by Derrick

  I have a custom info window over a google map, sometimes these info windows contain an image. When they do, the info window scales down over the marker it is positioned over as soon as the image has finished loading. So the images take longer to load and the div's position has already been calculated by the time the image is finished loading. I do believe there is a way of checking if an image has finished loaded, but that seems a long route - is there not a simple way with JS or CSS to get the div to scale upwards instead of down. Anyone have any clues?

  Read the article

• Keyboard doesn't work after Windows resume from sleep (S3) -- how to fix?

  - by Marco Z

  I have a weird issue with my keyboard after resuming from S3 sleep: I can type perfectly for maybe 5 seconds, but afterwards the keyboard ceases to work until I hibernate or restart (or sleep again -- see below.) The rest of my system runs just fine -- just the keyboard apparently "freezes" up. Some closer observations: The keyboard will work for 5 seconds (and freeze again) every time I resume from sleep, even if it was frozen from a previous sleep The caps lock light will work fine within the 5 seconds. But after the keyboard "freezes", the light will remain on, but I'll be unable to turn it off. Perhaps this means power wasn't cut off from the keyboard, but it's just some software freezing up the port??? Given this info, would this indicate a problem with Windows itself? Drivers, maybe? Can I rule out the BIOS as the culprit? Finally, any ideas on how to fix? Thanks! Specs: Windows 7 x64 HP tx1000 laptop

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• Raid recovery in gigabyte GA-8I945 Pro

  - by epeleg

  This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

  Read the article

• Is there a software that can remap the keys for a speficic keyboard?

  - by Vilx-

  There are several keyboards attached to my computer. I'd like to remap the keys on ONE of them, but keep the rest as they were. Is there a software that does this? As for the "why" - I have this idea that I'd like to have a "multimedia keypad" which is separate from my main keyboard, but I could not find any online. So I think that I could take a typical USB numpad (they cost like 5$), and remap the keys on one of them. Add appropriate stickers, and I'm all seat, cheaply. I know that it's theoretically possible, but before I get my hands dirty and write my own software, I'd like to see if there's maybe an existing one out there. Oh, yes, I'm running Windows 7.

  Read the article

• My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

  - by Anders

  Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

  Read the article

• Apache Web Server character encoding

  - by OBY

  I've recently transferred my webapp from my localhost (LH) to a VPS, and have had hebrew chars-encoding probs since. Whenever I send a request with a heb-char it results in "?????" saved to the DB. My LH config was tomcat6, MySQL, and centOS 6.2, opened to the web. In the VPS env I'm behind an Apache Web Server, and the rest is quite the same (though I haven't done anything to its installation). Please note I already have had this problem before, on my LH when the request was sent from IE/chrome (not FF!). The solution was to apply a filter on the the context and change the char-type to UTF-8. My webapp content char-encode is utf-8, MySql server set to utf8 using charset utf8;, and my centOS set to iw_IL.UTF8 using export LANG=iw_IL.UTF8. When I use locale the bash output seems to be set correctly. Any suggestions?

  Read the article

• Export Sharepoint 2007 Custom List as RSS File

  - by matt

  Here's our scenario: We've created a sharepoint 2007 calendar on our intranet site We want to run a daily job to export a subset of the events to an rss file Another job will move the rss file to our public web site We have some funny restrictions where we can't simply publish the rss feed to the public. We have to go this export route. I'm not clear on how to accomplish step 2. Ideally, we wouldn't have to write a lot of custom code to accomplish this. Thanks.

  Read the article

• Linux NetSec/IDS Bridge

  - by Blackninja543

  What I am looking to make is a linux system that acts as a bridge. It simple forwards any data sent on one device over to the next device. It does not attempt to block incoming attacks or redirect any traffic. What it does to is perform an IDS role on the network. Any suspicious activity is logged and reported. Snort would be one such piece of software however I was wondering what other solutions and ideas the rest of the community has.

  Read the article

• Using $.getJSON to perform cross domain request problem.

  - by Ahmed

  I'm using the following code to make cross domain request using $.getJSON, request completed but with errors, I cannot exactly detect what is the thrown error. Based on callback param of request value I route it to a certain method which retrieves required JSON data. $.getJSON("http://wthsrvr:45452/Handler.ashx/?Callback=DocumentReadStatus", { userID: vuserID, documentID: vdocumentID, format: "json" }, function(result) { if (result.readStatus == '1') { alert("ACCEPTED"); } else if (result.readStatus == '0') { alert("NOT ACCEPTED"); } else { alert(result.readStatus); } }); FYI: while development of this locally, everything worked fine, but after solution deployment to server and trying to do the same, I got that problem. Also, I tried the same functionality with web service, I got the same problem while calling web service from server. I'm using ajaxSetup to detect thrown errors. $.ajaxSetup({ "error": function(XMLHttpRequest, textStatus, errorThrown) { alert("textStatus: " + textStatus); alert("errorThrown: " + errorThrown); alert("responseText: " + XMLHttpRequest.responseText); } });

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >