Search Results

Search found 6992 results on 280 pages for 'exist'.

Page 247/280 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

• Retrofit Certification

  - by Bill Evjen

  Impact of Regulations on Cabin Systems Installation John Courtright, Structural Integrity Engineering There are “heightened” FAA attention to technical issues related to IFE and Wi-Fi Systems Installations The Aging Aircraft Safety Rule – EWIS & Damage Tolerance Analysis The Challenge: Maximize Flight Safety While Minimizing Costs Issue Papers & Testing, Testing, Testing The role of Airworthiness Directives (ADs) on the design of many IFE systems and all antenna systems. Goal is safety AND cost-effective maintenance intervals and inspection techniques The STC Process Briefly Stated Type Certifications (TC) Supplemental Type Certifications (STC) The STC Process Project Specific Certification Plan (PSCP) Managed by FAA Aircraft Certification Office (ACO) Type of Project (Electrical/Mechanical Systems or Structural) Specific Type of Aircraft Being Modified Schedule Design & Installation Location What does the STC Plan (PSCP) Cover? System Description – What does the system do? System qualification – Are the components qualified? Certification requirements – What FARs are applicable? Installation detail – what is being modified? Prototype installation – What is new? Functional hazard Assessment (FHA) – is it safe? EZAP-EWIS Requirements – Any aging aircraft issues? Certification Data – How is compliance achieved? Delegation and FAA involvement – Who is doing the work? Proposed certification schedule – When is the installation? Certification documentation – What the FAA Expects to see Cabin Systems Certification Concerns In addition to meeting the requirements for DO-160, Cabin System Certification needs to address issues related to: Power management: Generally, IFE and Wi-Fi Systems are classified as “Non-Essential Equipment” from a certification viewpoint. Connected to “non-essential” power buses Must be able to shed IFE & Wi-Fi Systems in a smoke/fire event or Other electrical emergency (FAA Policy 00-111-160) FAA is more relaxed with testing wi-fi. It used to be that you had to have 150 seats with laptops running wi-fi, but now it is down to around 50. Aging aircraft concerns – electrical and structural Issue papers addressing technical concerns involving: “Structural Certification Criteria for Large Antenna Installations” Antenna “Vibration/Buffeting Compliance Criteria” DO-160 : Environmental Test Procedures DO 160 – “Environmental Conditions and Test Procedures for Airborne Equipment”, Issued by RTCA Provides guidance to equipment manufacturers as to testing requirements Temperature: –40C to +55C Vibration and Shock Contaminant susceptibility – fluids and dust Electro-magnetic Interference Cabin systems are generally classified as “non-essential” Swissair 111 crashed (in part) due to non-standard wiring practices. EWIS Design Implications Installation design must take EWIS Requirements into account. This generally means: Aircraft surveys are needed to identify proper wire routing Ensure existing wiring diagrams are correct Identify primary/Secondary/Tertiary bus locations Verify proper separation of wire bundles exist Required separation from fuel quantity indicator system (FQIS) to prevent fuel tang ignition Enhanced Zonal Analysis Procedure (EZAP) Performed EZAP was developed by the Aging Transport Systems Rulemaking Advisory Committee (ATSRAC) EZAP is the method for analyzing airplane zones with an emphasis on evaluating wiring systems and the existence of combustibles  in the cabin. Certification Considerations for Wi-Fi Systems Electrical – All existing DO 160 testing required Issue papers required Onboard EMI testing – any interference with aircraft systems when multiple wi-fi users are logged on? Vibration/Buffeting compliance criteria – what is the effect of the antenna on aircraft flight characteristics? Structural certification criteria – what are the stress loads on the aircraft at the antenna location and what is the impact on maintenance inspection criteria for the airline? Damage tolerance analysis required Goal – minimize maintenance inspection intervals

  Read the article

• A more elegant way of embedding a SOAP security header in Silverlight 4

  - by Your DisplayName here!

  The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

  Read the article

• Deploying Oracle ADF Essentials Applications to Glassfish

  - by Shay Shmeltzer

  With the new Oracle ADF Essentials offering you can now deploy applications that leverage Oracle ADF on the open source Glassfish 3.1 server. Deployment is documented in the official JDeveloper and ADF documentation (here) but below is a summary of the steps and a video of the steps you'll need to take to get a basic Oracle ADF Essentials application to work on GlassFish. Note - to make starting/stopping GlassFish easier for my demo I used my GlassFish extension that you can get here. First we'll install some ADF Runtime libraries on GlassFish Download and install Glassfish (Note - if you also have an Oracle DB on the same machine, you'll want to switch GlassFish's HTTP port to something else instead of 8080). Download the Oracle ADF Essentials packaging - this will get you an adf_essentials.zip file. Copy the adf_essentials.zip to the lib directory of your Glassfish domain - on a default windows install this would be: C:\glassfish3\glassfish\domains\domain1\lib Go the the above lib directory and issue a unzip -j adf_essentials.zip This will extract the ADF libraries to the directory. Now you can start the Glassfish server. Now let's configure Glassfish to handle applications of the ADF type: Invoke the admin console of glassfish (http://localhost:4848) and log into your admin account. Go to Configurations->Server-config->JVM Settings and choose the JVM Options tab Add the following entries: -XX:MaxPermSize=512m (note this entry should already exist so just make sure it has a big enough value) -Doracle.mds.cache=simple While we are in the admin console, we can also define JDBC connections that will be used by our application. Go into Resources->JDBC->JDBC Connection Pools and click to create a New one Give it a name and choose the resource type to be javax.sql.XADataSource and choose Oracle as the Database Driver vendor. Click Next Scroll down to the Additional Properties section and start filling in the information for your database. The values for an Oracle XE will be (user=hr, databaseName = XE, Password=hr, ServerName=localhost, DriverType=thin, PortNumber=1521) Click Finish Click Ping to check your connection works. Now define a new JDBC Resource that will use the pool you just defined. In my example I called the resource jdbc/HRDS You will need this name to match the name in your Application Module connection configuraiton.Now you can re-start the Glassfish server for the changes to take effect. Get an ADF application going (you can use the regular Fusion Application template for this) Go into the project properties of your viewController project, under the deployment section click to edit the deployment profile that is defined there. Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. Go to Application -> Application Properties-> Deployment Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. This step will make sure that JDeveloper will autoamtically add the necessary ADF libraries to the EAR file that is being generated for deployment on Glassfish  Go to your Application->Deploy and deploy either to an EAR file or directly to a Glassfish server connection that you created. Things should just work, but if they don't then look up the server.log in the log directory and check out what error is in there. Here is a video demo of the various steps: Note - right now the deployment of an ADF application takes about 2 minutes on my machine we are hoping to be able to improve this timing in the future. People who are more familiar with Glassfish might want to explore using exploded directory deployment and see if they can get it to work.

  Read the article

• Managing common code on Windows 7 (.NET) and Windows 8 (WinRT)

  - by ryanabr

  Recent announcements regarding Windows Phone 8 and the fact that it will have the WinRT behind it might make some of this less painful but I  discovered the "XmlDocument" object is in a new location in WinRT and is almost the same as it's brother in .NET System.Xml.XmlDocument (.NET) Windows.Data.Xml.Dom.XmlDocument (WinRT) The problem I am trying to solve is how to work with both types in the code that performs the same task on both Windows Phone 7 and Windows 8 platforms. The first thing I did was define my own XmlNode and XmlNodeList classes that wrap the actual Microsoft objects so that by using the "#if" compiler directive either work with the WinRT version of the type, or the .NET version from the calling code easily. public class XmlNode     { #if WIN8         public Windows.Data.Xml.Dom.IXmlNode Node { get; set; }         public XmlNode(Windows.Data.Xml.Dom.IXmlNode xmlNode)         {             Node = xmlNode;         } #endif #if !WIN8 public System.Xml.XmlNode Node { get; set ; } public XmlNode(System.Xml.XmlNode xmlNode)         {             Node = xmlNode;         } #endif     } public class XmlNodeList     { #if WIN8         public Windows.Data.Xml.Dom.XmlNodeList List { get; set; }         public int Count {get {return (int)List.Count;}}         public XmlNodeList(Windows.Data.Xml.Dom.XmlNodeList list)         {             List = list;         } #endif #if !WIN8 public System.Xml.XmlNodeList List { get; set ; } public int Count { get { return List.Count;}} public XmlNodeList(System.Xml.XmlNodeList list)         {             List = list;        } #endif     } From there I can then use my XmlNode and XmlNodeList in the calling code with out having to clutter the code with all of the additional #if switches. The challenge after this was the code that worked directly with the XMLDocument object needed to be seperate on both platforms since the method for populating the XmlDocument object is completly different on both platforms. To solve this issue. I made partial classes, one partial class for .NET and one for WinRT. Both projects have Links to the Partial Class that contains the code that is the same for the majority of the class, and the partial class contains the code that is unique to the version of the XmlDocument. The files with the little arrow in the lower left corner denotes 'linked files' and are shared in multiple projects but only exist in one location in source control. You can see that the _Win7 partial class is included directly in the project since it include code that is only for the .NET platform, where as it's cousin the _Win8 (not pictured above) has all of the code specific to the _Win8 platform. In the _Win7 partial class is this code: public partial class WUndergroundViewModel     { public static WUndergroundData GetWeatherData( double lat, double lng)         { WUndergroundData data = new WUndergroundData();             System.Net. WebClient c = new System.Net. WebClient(); string req = "http://api.wunderground.com/api/xxx/yesterday/conditions/forecast/q/[LAT],[LNG].xml" ;             req = req.Replace( "[LAT]" , lat.ToString());             req = req.Replace( "[LNG]" , lng.ToString()); XmlDocument doc = new XmlDocument();             doc.Load(c.OpenRead(req)); foreach (XmlNode item in doc.SelectNodes("/response/features/feature" ))             { switch (item.Node.InnerText)                 { case "yesterday" :                         ParseForecast( new FishingControls.XmlNodeList (doc.SelectNodes( "/response/forecast/txt_forecast/forecastdays/forecastday" )), new FishingControls.XmlNodeList (doc.SelectNodes( "/response/forecast/simpleforecast/forecastdays/forecastday" )), data); break ; case "conditions" :                         ParseCurrent( new FishingControls.XmlNode (doc.SelectSingleNode("/response/current_observation" )), data); break ; case "forecast" :                         ParseYesterday( new FishingControls.XmlNodeList (doc.SelectNodes( "/response/history/observations/observation" )),data); break ;                 }             } return data;         }     } in _win8 partial class is this code: public partial class WUndergroundViewModel     { public async static Task< WUndergroundData > GetWeatherData(double lat, double lng)         { WUndergroundData data = new WUndergroundData (); HttpClient c = new HttpClient (); string req = "http://api.wunderground.com/api/xxxx/yesterday/conditions/forecast/q/[LAT],[LNG].xml" ;             req = req.Replace( "[LAT]" , lat.ToString());             req = req.Replace( "[LNG]" , lng.ToString()); HttpResponseMessage msg = await c.GetAsync(req); string stream = await msg.Content.ReadAsStringAsync(); XmlDocument doc = new XmlDocument ();             doc.LoadXml(stream, null); foreach ( IXmlNode item in doc.SelectNodes("/response/features/feature" ))             { switch (item.InnerText)                 { case "yesterday" :                         ParseForecast( new FishingControls.XmlNodeList (doc.SelectNodes( "/response/forecast/txt_forecast/forecastdays/forecastday" )), new FishingControls.XmlNodeList (doc.SelectNodes( "/response/forecast/simpleforecast/forecastdays/forecastday" )), data); break; case "conditions" :                         ParseCurrent( new FishingControls.XmlNode (doc.SelectSingleNode("/response/current_observation" )), data); break; case "forecast" :                         ParseYesterday( new FishingControls.XmlNodeList (doc.SelectNodes( "/response/history/observations/observation")), data); break;                 }             } return data;         }     } Summary: This method allows me to have common 'business' code for both platforms that is pretty clean, and I manage the technology differences separately. Thank you tostringtheory for your suggestion, I was considering that approach.

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• Find Knowledge Quickly

  - by Get Proactive Customer Adoption Team

  Untitled Document Get to relevant knowledge on the Oracle products you use in a few quick steps! Customers tell us that the volume of search results returned can make it difficult to find the information they need, especially when similar Oracle products exist. These simple tips show you how to filter, browse, search, and refine your results to get relevant answers faster. Filter first: PowerView is your best friend Powerview is an often ignored feature of My Oracle Support that enables you to control the information displayed on the Dashboard, the Knowledge tab and regions, and the Service Request tab based on one or more parameters. You can define a PowerView to limit information based on product, product line, support ID, platform, hostname, system name and others. Using PowerView allows you to restrict: Your search results to the filters you have set The product list when selecting your products in Search & Browse and when creating service requests   The PowerView menu is at the top of My Oracle Support, near the title You turn PowerView on by clicking PowerView is Off, which is a button. When PowerView is On, and filters are active, clicking the button again will toggle Powerview off. Click the arrow to the right to create new filters, edit filters, remove a filter, or choose from the list of previously created filters. You can create a PowerView in 3 simple steps! Turn PowerView on and select New from the PowerView menu. Select your filter from the Select Filter Type dropdown list and make selections from the other two menus. Hint: While there are many filter options, selecting your product line or your list of products will provide you with an effective filter. Click the plus sign (+) to add more filters. Click the minus sign (-) to remove a filter. Click Create to save and activated the filter(s) You’ll notice that PowerView is On displays along with the active filters. For more information about the PowerView capabilities, click the Learn more about PowerView… menu item or view a short video. Browse & Refine: Access the Best Match Fast For Your Product and Task In the Knowledge Browse region of the Knowledge or Dashboard tabs, pick your product, pick your task, select a version, if applicable. A best match document – a collection of knowledge articles and resources specific to your selections - may display, offering you a one-stop shop. The best match document, called an “information center,” is an aggregate of dynamically updated links to information pertinent to the product, task, and version (if applicable) you chose. These documents are refreshed every 24 hours to ensure that you have the most current information at your fingertips. Note: Not all products have “information centers.” If no information center appears as a best match, click Search to see a list of search results. From the information center, you can access topics from a product overview to security information, as shown in the left menu. Just want to search? That’s easy too! Again, pick your product, pick your task, select a version, if applicable, enter a keyword term, and click Search. Hint: In this example, you’ll notice that PowerView is on and set to PeopleSoft Enterprise. When PowerView is on and you select a product from the Knowledge Base product list, the listed products are limited to the active PowerView filter. (Products you’ve previously picked are also listed at the top of the dropdown list.) Your search results are displayed based on the parameters you entered. It’s that simple! Related Information: My Oracle Support - User Resource Center [ID 873313.1] My Oracle Support Community For more tips on using My Oracle Support, check out these short video training modules. My Oracle Support Speed Video Training [ID 603505.1]

  Read the article

• Missing Fields and Default Values

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Dealing with Missing Fields and Default Values New fields and new default values are not propagated throughout the list. They only apply to new and updated items and not to items already entered. They are only prospective. We need to be able to deal with this issue. Here is a scenario. The user has an old list with old items and adds a new field. The field is not created for any of the old items. Trying to get its value raises an Argument Exception. Here is another: a default value is added to a field. All the old items, where the field was not assigned a value, do not get the new default value. The two can also happen in tandem – a new field is added with a default. The older items have neither. Even better, if the user changes the default value, the old items still carry the old defaults. Let’s go a bit further. You have already written code for the list, be it an event receiver, a feature receiver, a console app or a command extension, in which you span all the fields and run on selected items – some new (no problem) and some old (problems aplenty). Had you written defensive code, you would be able to handle the situation, including similar changes in the future. So, without further ado, here’s how. Instead of just getting the value of a field in an item – item[field].ToString() – use the function below. I use ItemValue(item, fieldname, “mud in your eye”) and if “mud in your eye” is what I get, I know that the item did not have the field.   /// <summary> /// Return the column value or a default value /// </summary> private static string ItemValue(SPItem item, string column, string defaultValue) {     try     {         return item[column].ToString();     }     catch (NullReferenceException ex)     {         return defaultValue;     }     catch (ArgumentException ex)     {         return defaultValue;     } } I also use a similar function to return the default and a funny default-default to ascertain that the default does not exist. Here it is:  /// <summary> /// return a fields default or the "default" default. /// </summary> public static string GetFieldDefault(SPField fld, string defValue) {     try     {         // -- Check if default exists.         return fld.DefaultValue.ToString();     }     catch (NullReferenceException ex)     {         return defValue;     }     catch (ArgumentException ex)     {         return defValue;     } } How is this defensive? You have trapped an expected error and dealt with it. Therefore the program did not stop cold in its track and the required code ran to its end. Now, take a further step - write to a log (See Logging – a log blog). Read your own log every now and then, and act accordingly. That’s all Folks!

  Read the article

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

  - by Steve Pepper

  There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

  Read the article

• The Minimalist Approach to Content Governance - Request Phase

  - by Kellsey Ruppel

  Originally posted by John Brunswick. For each project, regardless of size, it is critical to understand the required ownership, business purpose, prerequisite education / resources needed to execute and success criteria around it. Without doing this, there is no way to get a handle on the content life-cyle, resulting in a mass of orphaned material. This lowers the quality of end user experiences.     The good news is that by using a simple process in this request phase - we will not have to revisit this phase unless something drastic changes in the project. For each of the elements mentioned above in this stage, the why, how (technically focused) and impact are outlined with the intent of providing the most value to a small team. 1. Ownership Why - Without ownership information it will not be possible to track and manage any of the content and take advantage of many features of enterprise content management technology. To hedge against this, we need to ensure that both a individual and their group or department within the organization are associated with the content. How - Apply metadata that indicates the owner and department or group that has responsibility for the content. Impact - It is possible to keep the content system optimized by running native reports against the meta-data and acting on them based on what has been outlined for success criteria. This will maximize end user experience, as content will be faster to locate and more relevant to the user by virtue of working through a smaller collection. 2. Business Purpose Why - This simple step will weed out requests that have tepid justification, as users will most likely not spend the effort to request resources if they do not have a real need. How - Use a simple online form to collect and workflow the request to management native to the content system. Impact - Minimizes the amount user generated content that is of low value to the organization. 3. Prerequisite Education Resources Needed Why - If a project cannot be properly staffed the probability of its success is going to be low. By outlining the resources needed - in both skill set and duration - it will cause the requesting party to think critically about the commitment needed to complete their project and what gap must be closed with regard to education of those resources. How - In the simple request form outlined above, resources and a commitment to fulfilling any needed education should be included with a brief acceptance clause that outlines the requesting party's commitment. Impact - This stage acts as a formal commitment to ensuring that resources are able to execute on the vision for the project. 4. Success Criteria Why - Similar to the business purpose, this is a key element in helping to determine if the project and its respective content should continue to exist if it does not meet its intended goal. How - Set a review point for the project content that will check the progress against the originally outlined success criteria and then determine the fate of the content. This can even include logic that will tell the content system to remove items that have not been opened by any users in X amount of time. Impact - This ensures that projects and their contents do not live past their useful lifespans. Just as with orphaned content, non-relevant information will slow user's access to relevant materials for the jobs. Request Phase Summary With a simple form that outlines the ownership of a project and its content, business purpose, education and resources, along with success criteria, we can ensure that an enterprise content management system will stay clean and relevant to end users - allowing it to deliver the most value possible. The key here is to make it straightforward to make the request and let the content management technology manage as much as possible through metadata, retention policies and workflow. Doing these basic steps will allow project content to get off to a great start in the enterprise! Stay tuned for the next installment - the "Create Phase" - covering security access and workflow involved in content creation, enabling a practical layer of governance over our enterprise content repository.

  Read the article

• Top 5 characteristics Recruiters are looking for

  - by Maria Sandu

  Of course many skills and characteristics recruiters are looking for are job specific. But whether you are a graduate fresh out of college or seasoned in the workplace, recruiters are also looking for generic skills and attitude to see whether you are a good fit to the company. So make sure you prepare and show through examples that you have these skills. 1. Drive/passion Liking the job you are applying for is paramount and something recruiters are always looking for. Show and prove your drive for the role and/or the field you are applying for. Always be prepared to pitch yourself, this shows your drive in the role you are applying for. 2. Communication skills People often make the mistake by thinking this skill is related to how good they are able to talk about their background and expertise. This is important, but as least as important is it that you listen well to questions that are asked. Make sure you answer to the point and ask questions if you want questions to be clarified. This shows your interest in the role and the ability to communicate clearly. This also helps you building trust with the recruiter every time you speak to him/her. 3. Confidence Recruiters are looking for the best candidate for the job. So if you don’t think you are the best candidate why should the recruiter? Show with confidence, without being arrogant (think about building trust), why you are the right person for the job. Confidence also shows in your answers to difficult questions. Be confident enough to explain why some experiences went wrong and how you learnt from them. If you don’t have a direct explanation on a question, it is better to ask for a second to think instead of a random answer. 4. Vision The main reason to hire graduates for many companies is that graduates are perceived to be flexible. The organisation will train and up skill you in the direction best suitable for the organisation. However the most intense learning path is realised when you also know where you want to go. Companies are often happy to accommodate you to support with training and development, but if you don’t have a clear vision on what you want to achieve for yourself and what value you bring to the company, recruiters can decide you are not the right candidate as they are afraid you aren’t going to stay in the company. 5. Business awareness For every job you apply you will get challenged on your knowledge and interest for the market and business they are in. All companies add value in different ways in their respective markets. So make sure you are aware of what a company is doing, what their goal is and why and how they exist and how you can add value for the company in the role you are applying for. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

  - by ultan o'broin

  Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

  Read the article

• Dual monitor not working completely in 12.10 after upgrade

  - by Mark Baldridge

  At 12.04, dual monitors worked perfectly. After upgrading to 12.10, the primary monitor works, the second monitor only partly works. I am sure there is some difference between the releases that I have missed setting properly. System settings - Displays show both correctly as Acer 22" monitors at 1680x1050 (16:10). An icon on monitor 2 is present, but elongated; almost an artifact, since other icons on the primary screen are absent, but this one icon is there on th second monitor. Selecting the icons on both screens exist. Painting is weird on monitor 2. Launcher exists and works on both screens, but even with sticky edges off, the cursor stops at the left edge of monitor 2. Clicking on text editor on screen 2 launcer will launch gedit there. If I drag it, it leaves a trail of after images like repaint is failing. If I drive the cursor on the launcher, the help tags like "LibreOffice Writer" appear, but stay on screen unless I drag the active gedit window over them. Then part of the help bubbles are overwritten, leaving behind after images of the gedit window on screen. What is really fascinating is that the System settings - Displays is now ignoring monitor selection, after allowing it earlier. Just before this, the help popup which said "Select a monitor to change its properties; drag to rearrange its placement" actually let me do that. Maybe a trick of where I grab the edge of the monitor in the Displays setting. I just found a working handle. When I drag monitor 1 to the right of monitor 2, "Apply" and confirm, both monitors work normally (although the right monitor lets the cursor slide off the right edge onto the left edge of monitor 1 - which sounds correct). Painting of windows does not leave an after image. However, success is only temporary. The setting survives the reboot, but painting on the left monitor, now monitor 2, now replicates the issues from before. The after image of the gedit window and the small window for "Are you sure you want to close all programs and restart the computer?" are still on monitor 2 (on the left now), even though they are not real windows, nor do they have processes behind them. Curiously, in Displays, the "green" monitor on the left in the display window is matched by the right monitor color in the monitor upper left corner. Probably makes sense as the one on the right is now monitor 1. If I repeat the "drag the left monitor to the right of the right monitor on the "Displays" window, things are oriented properly, with no display artifacts as I drag windows around either screen. Also the description bubbles that pop up are overwritten on both screens, so none of those artifacts either. This goodness does not survive a reboot, however. Have not tried logging out and back in. All of this after positing that the motherboard VGA and HDMI ports could have been the issue. So, I installed an e-GeForce 7600 GT Dual DVI (I know the web thinks it is not DVI, but VGA, but the connectors are DVI). No change to the weird behavior. The good parts continue to work, the weirdness also works, and swapping monitor positions seems to cure the issue. So, is there a setting I have missed? Given "swapping" monitor 1 and 2 on the System Settings... - Displays makes it work, just not across boot, I suspect so.

  Read the article

• A .NET Developers day with the iPad.

  - by mbcrump

  The Apple iPad is currently getting a lot of buzz because of the app store, the book store and of course iTunes. I had the chance to play with one and this is what I have learned about the device. Let’s get this out of the way first, the iPad is awesome. It is the device for media consumption and casual web browsing. But how does it measure up to those of us with .NET on our brains all days. Let’s find out… Main Screen – you can customize everything on this page. I guess I should replace that image with a C# or VS logo. Its pretty standard stuff if you have an iPhone.   Programming Books If you have a subscription to Safari Books Online, then you are in luck, its very easy to read the books on the iPad. Just fire up Safari web browser and goto the Safari Books Online. The biggest benefit that I can see with the iPad is the ability to read books wherever and not have to worry about purchasing books that I already have the .PDF for. Below is a sample from Code Complete 2nd Edition. Below is a PDF of the ECMA-334 C# Language Specification. As you can see its very readable and you should have no problem reading actual code.   Example of Code shown below: It is however easier to read the PDF and store them with a 3rd party PDF reader. I have seen several for .99 cents or less. You can however switch the screen to vertical to get more viewing space as shown below: I was disappointed with the iBooks application. I could not find a single .NET programming book anywhere. I was able to download the excellent sci-fi book “A memory of Wind” for free though. If I just overlooked them, then please email me with the names and titles. I couldn’t even find a technology category in the categories list. Web Surfing – Technical Sites Below is an example of my site in Safari. The code is very readable and the experience was identical to viewing it in Firefox. I tried multiple programming site and the pages looked great except those that used flash and of course it did not display on those pages.   News Apps - Technical Content The standard NY Times and USA Today looked great, but the Technical Content was lacking. It would probably be better to use Google Reader for online technical news.     YouTube Videos – Technical Content  Since its YouTube, we already know that a lot of technical content exist and it plays great on the iPad. I watched several programming videos and could clearly see the code being written. Taking Technical Notes The iPad comes with a great notepad for taking notes. I found that it was easy to take notes regarding projects that I am currently working on.   Calendar The calendar that ships with the iPad is great for organizing. You can setup exchange server or manually enter the information. Pretty standard stuff.    Random Applications that I like: TweetDeck.   and Adobe Ideas. Adobe Ideas is kinda like SketchFlow except you use your finger to mock up the sketches.  Don’t forget that the iPad is great for any type of podcasting. That pretty much sums it up, I would definitely recommend this device as it will only get better. I believe the iOS4 comes out on the 24th and the iPad will only get more and more apps. You could save a few bucks by waiting for the 2nd generation, but that’s a call that only you can make.

  Read the article

• Introducing the Metro User Interface on Windows 2012

  - by andywe

  Although I am a big fan of using PowerShell to do many of my server operations, that aspect is well covered by those far more knowledgeable than I, and there is vast information around the web already on that. The new Metro interface, and getting around both Windows 8 and Windows Server 2012 though is relatively new, even for those whop ran the previews. What is this? A blank Desktop!   Where did the start button go? Well, it is still there...sort of. It is hidden, and acts like an auto hidden component that appear only when the mouse is hovered over the lower left corner of the screen. Those familiar with Gnome or OSX can relate this to the "Hot Corners" functions. To get to the start button, hover your mouse in the very left corner of the task bar. Let it sit there a moment, and a small blue square with colored tiles in it called start will appear. Click it. I clicked it and now I have all the tiles..What is this?   Welcome to the Metro interface. This is a much more modern look, and although at first seems weird and cumbersome, I have actually found that it is a bit more extensible, allowing greater organization and customization than the older explorer desktop. If you look closely, you'll see each box represents either a program, or program group. First, a few basics about using the start view. First and foremost, a right mouse click will bring up a bar on the bottom, with an icon towards the right. Notice it is titled “All Apps”. An even easier way in many places is to hover your mouse in the exact opposite corner, in the upper right. A sidebar will open and expose what used to be a widget bar (remember Vista?), and there are options for Search, Start, and Settings.   Ok Great, but where is everything? It’s all there…Click the All Apps icon.   Look better? Notice the scroll bar at the bottom. Move it right..your desktop is sized to your content..so you can have a smaller, or larger amount of programs exposed. Each icon can be secondary clicked (right mouse click for most of us, and an options bar at the bottom, rather than the old small context menu, is opened with some very familiar options.   Notice the top of the Windows Explorer window has some new features. You still have your right mouse click functions, but since the shortcuts for these items already exist..just copy them. There are many ways, but here is a long way to show you more of the interface. 1. Right mouse click a program icon, and select the Open File Location option. 2. Trusty file manager opens…but if you look closely up at top edge of the window, you’ll see a nifty enhancement. An orange colored box that is titled Shortcut Tools and another lavender box Title Application tools. Each of these adds options at the top of the file manager window to make selection easy. Of course, you can still secondary click an item in the listing window too. 3. Click shortcut tools, right click your app shortcut and copy it. Then simply paste it into the desktop outside the File Explorer window Also note some of the newer features. The large icons up top below the menu that has many common operations. The options change as you select each menu item. Well, that’s it for this installment. I hope this helps you out.

  Read the article

• When should I use a Process Model versus a Use Case?

  - by Dave Burke

  This Blog entry is a follow on to https://blogs.oracle.com/oum/entry/oum_is_business_process_and and addresses a question I sometimes get asked…..i.e. “when I am gathering requirements on a Project, should I use a Process Modeling approach, or should I use a Use Case approach?” Not surprisingly, the short answer is “it depends”! Let’s take a scenario where you are working on a Sales Force Automation project. We’ll call the process that is being implemented “Lead-to-Order”. I would typically think of this type of project as being “Process Centric”. In other words, the focus will be on orchestrating a series of human and system related tasks that ultimately deliver value to the business in a cost effective way. Put in even simpler terms……implement an automated pre-sales system. For this type of (Process Centric) project, requirements would typically be gathered through a series of Workshops where the focal point will be on creating, or confirming, the Future-State (To-Be) business process. If pre-defined “best-practice” business process models exist, then of course they could and should be used during the Workshops, but even in their absence, the focus of the Workshops will be to define the optimum series of Tasks, their connections, sequence, and dependencies that will ultimately reflect a business process that meets the needs of the business. Now let’s take another scenario. Assume you are working on a Content Management project that involves automating the creation and management of content for User Manuals, Web Sites, Social Media publications etc. Would you call this type of project “Process Centric”?.......well you could, but it might also fall into the category of complex configuration, plus some custom extensions to a standard software application (COTS). For this type of project it would certainly be worth considering using a Use Case approach in order to 1) understand the requirements, and 2) to capture the functional requirements of the custom extensions. At this point you might be asking “why couldn’t I use a Process Modeling approach for my Content Management project?” Well, of course you could, but you just need to think about which approach is the most effective. Start by analyzing the types of Tasks that will eventually be automated by the system, for example: Best Suited To? Task Name Process Model Use Case Notes Manage outbound calls Ö A series of linked human and system tasks for calling and following up with prospects Manage content revision Ö Updating the content on a website Update User Preferences Ö Updating a users display preferences Assign Lead Ö Reviewing a lead, then assigning it to a sales person Convert Lead to Quote Ö Updating the status of a lead, and then converting it to a sales order As you can see, it’s not an exact science, and either approach is viable for the Tasks listed above. However, where you have a series of interconnected Tasks or Activities, than when combined, deliver value to the business, then that would be a good indicator to lead with a Process Modeling approach. On the other hand, when the Tasks or Activities in question are more isolated and/or do not cross traditional departmental boundaries, then a Use Case approach might be worth considering. Now let’s take one final scenario….. As you captured the To-Be Process flows for the Sales Force automation project, you discover a “Gap” in terms of what the client requires, and what the standard COTS application can provide. Let’s assume that the only way forward is to develop a Custom Extension. This would now be a perfect opportunity to document the functional requirements (behind the Gap) using a Use Case approach. After all, we will be developing some new software, and one of the most effective ways to begin the Software Development Lifecycle is to follow a Use Case approach. As always, your comments are most welcome.

  Read the article

• Criminals and Other Illegal Characters

  - by Most Valuable Yak (Rob Volk)

  SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

  Read the article

• Is there any kind of established architecture for browser based games?

  - by black_puppydog

  I am beginning the development of a broser based game in which players take certain actions at any point in time. Big parts of gameplay will be happening in real life and just have to be entered into the system. I believe a good kind of comparison might be a platform for managing fantasy football, although I have virtually no experience playing that, so please correct me if I am mistaken here. The point is that some events happen in the program (i.e. on the server, out of reach for the players) like pulling new results from some datasource, starting of a new round by a game master and such. Other events happen in real life (two players closing a deal on the transfer of some team member or whatnot - again: have never played fantasy football) and have to be entered into the system. The first part is pretty easy since the game masters will be "staff" and thus can be trusted to a certain degree to not mess with the system. But the second part bothers me quite a lot, especially since the actions may involve multiple steps and interactions with different players, like registering a deal with the system that then has to be approved by the other party or denied and passed on to a game master to decide. I would of course like to separate the game logic as far as possible from the presentation and basic form validation but am unsure how to do this in a clean fashion. Of course I could (and will) put some effort into making my own architectural decisions and prototype different ideas. But I am bound to make some stupid mistakes at some point, so I would like to avoid some of that by getting a little "book smart" beforehand. So the question is: Is there any kind of architectural works that I can read up on? Papers, blogs, maybe design documents or even source code? Writing this down this seems more like a business application with business rules, workflows and such... Any good entry points for that? EDIT: After reading the first answers I am under the impression of having made a mistake when including the "MMO" part into the title. The game will not be all fancy (i.e. 3D or such) on the client side and the logic will completely exist on the server. That is, apart from basic form validation for the user which will also be mirrored on the server side. So the target toolset will be HTML5, JavaScript, probably JQuery(UI). My question is more related to the software architecture/design of a system that enforces certain rules. Separation of ruleset and presentation One problem I am having is that I want to separate the game rules from the presentation. The first step would be to make an own module for the game "engine" that only exposes an interface that allows all actions to be taken in a clean way. If an action fails with regard to some pre/post condition, the engine throws an exception which is then presented to the user like "you cannot sell something you do not own" or "after that you would end up in a situation which is not a valid game state." The problem here is that I would like to be able to not even present invalid action in the first place or grey out the corresponding UI elements. Changing and tweaking the ruleset Another big thing is the ruleset. It will probably evolve over time and most definitely must be tweaked. What's more, it should be possible (to a certain extent) to build a ruleset that fits a specific game round, i.e. choosing different kinds of behaviours in different aspects of the game. This would do something like "we play it with extension A today but we throw out extension B." For me, this screams "Architectural/Design pattern" but I have no idea on who might have published on something like this, not even what to google for.

  Read the article

• ZFS Storage Appliance ? ldap ??????

  - by user13138569

  ZFS Storage Appliance ? Openldap ????????? ???ldap ?????????????? Solaris 11 ? Openldap ????????????? ??? slapd.conf ??ldif ?????????? user01 ??????? ?????? slapd.conf # # See slapd.conf(5) for details on configuration options. # This file should NOT be world readable. # include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/nis.schema # Define global ACLs to disable default read access. # Do not enable referrals until AFTER you have a working directory # service AND an understanding of referrals. #referral ldap://root.openldap.org pidfile /var/openldap/run/slapd.pid argsfile /var/openldap/run/slapd.args # Load dynamic backend modules: modulepath /usr/lib/openldap moduleload back_bdb.la # moduleload back_hdb.la # moduleload back_ldap.la # Sample security restrictions # Require integrity protection (prevent hijacking) # Require 112-bit (3DES or better) encryption for updates # Require 63-bit encryption for simple bind # security ssf=1 update_ssf=112 simple_bind=64 # Sample access control policy: # Root DSE: allow anyone to read it # Subschema (sub)entry DSE: allow anyone to read it # Other DSEs: # Allow self write access # Allow authenticated users read access # Allow anonymous users to authenticate # Directives needed to implement policy: # access to dn.base="" by * read # access to dn.base="cn=Subschema" by * read # access to * # by self write # by users read # by anonymous auth # # if no access controls are present, the default policy # allows anyone and everyone to read anything but restricts # updates to rootdn. (e.g., "access to * by * read") # # rootdn can always read and write EVERYTHING! ####################################################################### # BDB database definitions ####################################################################### database bdb suffix "dc=oracle,dc=com" rootdn "cn=Manager,dc=oracle,dc=com" # Cleartext passwords, especially for the rootdn, should # be avoid. See slappasswd(8) and slapd.conf(5) for details. # Use of strong authentication encouraged. rootpw secret # The database directory MUST exist prior to running slapd AND # should only be accessible by the slapd and slap tools. # Mode 700 recommended. directory /var/openldap/openldap-data # Indices to maintain index objectClass eq ?????????ldif???? dn: dc=oracle,dc=com objectClass: dcObject objectClass: organization dc: oracle o: oracle dn: cn=Manager,dc=oracle,dc=com objectClass: organizationalRole cn: Manager dn: ou=People,dc=oracle,dc=com objectClass: organizationalUnit ou: People dn: ou=Group,dc=oracle,dc=com objectClass: organizationalUnit ou: Group dn: uid=user01,ou=People,dc=oracle,dc=com uid: user01 objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount cn: user01 uidNumber: 10001 gidNumber: 10000 homeDirectory: /home/user01 userPassword: secret loginShell: /bin/bash shadowLastChange: 10000 shadowMin: 0 shadowMax: 99999 shadowWarning: 14 shadowInactive: 99999 shadowExpire: -1 ldap?????????????ZFS Storage Appliance??????? Configuration SERVICES LDAP ??Base search DN ?ldap??????????? ???? ldap ????????? user01 ???????????????? ???????????? user ????????? Unknown or invalid user ?????????????????? ????????????????Solaris 11 ???????????? ????????????? ldap ????????getent ??????????????? # svcadm enable svc:/network/nis/domain:default # svcadm enable ldap/client # ldapclient manual -a authenticationMethod=none -a defaultSearchBase=dc=oracle,dc=com -a defaultServerList=192.168.56.201 System successfully configured # getent passwd user01 user01:x:10001:10000::/home/user01:/bin/bash ????????? user01 ?????????????? # mount -F nfs -o vers=3 192.168.56.101:/export/user01 /mnt # su user01 bash-4.1$ cd /mnt bash-4.1$ touch aaa bash-4.1$ ls -l total 1 -rw-r--r-- 1 user01 10000 0 May 31 04:32 aaa ?????? ldap ??????????????????????????!

  Read the article

• Time Service will not start on Windows Server - System error 1290

  - by paradroid

  I have been trying to sort out some time sync issues involving two domain controllers and seem to have ended up with a bigger problem. It's horrible. They are both virtual machines (one being on Amazon EC2), which I think may complicate things regarding time servers. The primary DC with all the FSMO roles is on the LAN. I reset its time server configuration like this (from memory): net stop w32time w23tm /unregister shutdown /r /t 0 w32tm /register w32tm /config /manualpeerlist:”0.uk.pool.ntp.org,1.uk.pool.ntp.org,2.uk.pool.ntp.org,3.uk.pool.ntp.org” /syncfromflags:manual /reliable:yes /update W32tm /config /update net start w32time reg QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config /v AnnounceFlags I checked to see if it was set to 0x05, which it was. The output for... w32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 10/04/2012 15:03:27 Source: Local CMOS Clock Poll Interval: 6 (64s) While this was not what was intended, I thought I would sort it out after I made sure that the remote DC was syncing with it first. On the Amazon EC2 remote replica DC (Windows Server 2008 R2 Core)... net stop w32time w32tm /unregister shutdown /r /t 0 w32time /register net start w32time This is where it all goes wrong System error 1290 has occurred. The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service. I cannot get the w32time service to start. I've tried resetting the time settings and tried to reverse what I have done. The Ec2Config service cannot start either, as it depends on the w32time service. All the solutions I have seen involve going into the telephony service registry settings, but as it is Server Core, it does not have that role, and I cannot see the relationship between that and the time service. w32time runs in the LocalService group and this telephony service which does not exist on Core runs in the NetworkService group. Could this have something to do with the process (svchost.exe) not being able to be run as a domain account, as it now a domain controller, but originally it ran as a local user group, or something like that? There seem to be a lot of cases of people having this problem, but the only solution has to do with the (non-existant on Core) telephony service. Who even uses that?

  Read the article

• Installation of SAP Web Application Server 6.20 fails

  - by karthikeyan b

  I tried installing a trial version of SAP NetWeaver 7.1 on Windows Vista on my laptop but I couldn't succeed. Then I tried installing SAP Web Application Server 6.20. The installation goes all the way to 91%, at which point I get some errors and the installation stops. Does anyone have any experience with this? Here's the complete error log below: nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:\. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop\. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ...

  Read the article

• passenger-status - ERROR: Phusion Passenger doesn't seem to be running

  - by Casual Coder

  My server is: Server version: Apache/2.2.11 (Ubuntu) Server built: Aug 16 2010 17:44:11 My ruby version ruby 1.9.2p136 (2010-12-25 revision 30365) [x86_64-linux]. I've installed passenger 3.0.7 via RubyGems. I've run passenger-install-apache2-module and everything went fine. I've modified configuration (load module, edit virtualhost etc.) and restarted Apache. Module is loading fine (apache does not complain). But Passenger is obviously not working: sudo passenger-status ERROR: Phusion Passenger doesn't seem to be running. How can I get it working ? Edit 1: /etc/apache2/mods-enabled/passenger.load LoadModule passenger_module /usr/lib/ruby/gems/1.9.1/gems/passenger-3.0.7/ext/apache2/mod_passenger.so Root of passenger: passenger-config --root /usr/lib/ruby/gems/1.9.1/gems/passenger-3.0.7 Apache VirtualHost sub URI configuration in /etc/apache2/sites-enabled/railsapps: <VirtualHost <IP ADDRESS>:80> ServerAdmin webmaster@localhost ServerName my.server.name PassengerRoot /usr/lib/ruby/gems/1.9.1/gems/passenger-3.0.7 PassengerRuby /usr/bin/ruby RailsEnv development DocumentRoot /www/vhosts/railsapps <Directory /www/vhosts/railsapps> Options FollowSymlinks -MultiViews AllowOverride None Order allow,deny Allow from all </Directory> RailsBaseURI /siteA <Directory /www/vhosts/railsapps/siteA> Options -MultiViews AllowOverride All Order allow,deny Allow from all </Directory> RailsBaseURI /siteB <Directory /www/vhosts/railsapps/siteB> AllowOverride All Options -MultiViews Order allow,deny Allow from all </Directory> LogLevel info ErrorLog /var/log/apache2/railsapps_error.log CustomLog /var/log/apache2/railsapps_access.log combined </VirtualHost> Of course as in 'users guide apache.html' siteA and siteB are symlinks to siteA/public and siteB/public absolute paths respectively. Edit 2: In logs there is nothing related to passenger. Permissions are also fine (read and executable) on directories in paths. Even if it was some misconfiguration or permission problem isn't passenger suppose to be running? I mean sudo passenger-status should at least output --- general information ---. When I place some test html file in railsapps directory it is served fine. /var/log/apache2/railsapps_error.log [Sun Jun 19 12:19:08 2011] [error] [client <IP>] Directory index forbidden by Options directive: /www/vhosts/railsapps/siteA/ [Sun Jun 19 12:19:08 2011] [error] [client <IP>] File does not exist: /www/vhosts/railsapps/favicon.ico

  Read the article

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• windows firewall broken on server 2008

  - by Chloraphil

  This evening I tried to rdp into my server 2008 box and was unable to. After poking around some I discovered that something is awry with my Windows Firewall. I did install 5 windows updates remotely earlier today but rolled those back in an attempt to see if that fixed the problem but had no luck. Symptoms: cannot rdp to machine (including from itself) cannot ping machine cannot connect to file share on machine error message when attempting to open "windows firewall with advanced security" snap-in (there was an error opening the windows firewall with advanced security snap-in ... The Windows Firewall with Advanced Security snap-in failed to load. Restart the windows firewall service on the computer that you are managing. Error code: 0x6D9. When I opened the "user-friendly" Windows Firewall it failed to load most of the gui elements, meaning, the title bar with close, minimize, and maximize buttons is present, the rest of the window has a white background with a yellow rectangle with rounded corners and a yellow triangle w/ an exclamation point is in the upper right. hope that made sense "Windows Firewall" does not appear in the list of services I ran a virus scan that found nothing. How do I fix the firewall and hopefully restore the ability to rdp? EDIT: Added at fission's request: c:\sc query mpsdrv SERVICE_NAME: mpsdrv TYPE : 1 KERNEL_DRIVER STATE : 4 RUNNING (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 c:\sc query mpssvc SERVICE_NAME: mpssvc TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED WIN32_EXIT_CODE : 1068 (0x42c) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 Those two registry keys do exist: HKLM\SYSTEM\CurrentControlSet\Services\mpsdrv & HKLM\SYSTEM\CurrentControlSet\Services\MpsSvc ! The problem seems to be with the Base Filtering Engine, when I try to start it I get the following error: Windows could not start the Base Filtering Engine service on MYCOMPUTER. Error 15100: The resource loader failed to find MUI file. EDIT2: I ran sfc /scannow and i found about 100 occurrences of "[SR] Cannot repair member file"... including several related to the firewall (ex: [l:32{16}]"Firewall.cpl.mui" of Networking-MPSSVC.Resources...). One of them mentioned wordpad.exe, which I tried to open, and it failed. I found here mentions of mounting the install.wim on the install media to copy the affected files over. I am downloading the appropriate AIK and will continue tomorrow evening.

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >