Search Results

Search found 11797 results on 472 pages for 'fedora 12'.

Page 247/472 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• How to control linux workstations- with poloices.

  - by redknight

  I am going to be administering a small network of linux based workstations for a charity institution (not all have the same distro- some are ubuntu and some are fedora). Is there something in Linux that is similar to group policy in windows?. For example I would like to standardize the wallpapers - have only firefox as a browser - default VLC as the media player etc etc. Thank you, any suggestions are very appreciated.

  Read the article

• Who should own exim4 under debian?

  - by raindog308

  Installed debian from DVD. And now I see exim4 is running owned by UID 107. There is no user 107 in my /etc/passwd. Same problem on another system (owned by UID 101), so I suspect this is a debian problem...? Running squeeze on both. So under debian, who should own the mail system? This is what I have installed: # dpkg -l | grep exim ii exim4 4.72-6+squeeze2 metapackage to ease Exim MTA (v4) installation ii exim4-base 4.72-6+squeeze2 support files for all Exim MTA (v4) packages ii exim4-config 4.72-6+squeeze2 configuration for the Exim MTA (v4) ii exim4-daemon-light 4.72-6+squeeze2 lightweight Exim MTA (v4) daemon The binary itself is owned by root: -rwsr-xr-x 1 root root 758852 May 12 2011 /usr/sbin/exim4

  Read the article

• Win 2008 Server configuration

  - by user123790

  Let me preface my question by saying I'm a novice in regards to server configuration. It's been 12+ years since I've attempted this. What we (our small office) are trying to achieve is to setup a Win 2008 server (located in a home) in a home network configuration (basic wireless router w/DHCP) that we (the office) can VPN to from our office. I have installed the software, installed DHCP, removed DHCP from the router, set the scope for 100 IPs and am now looking for information as to where I go from here? I believe I need to configure DNS and possibly set up static routes on the router for the home devices that need internet? The wireless clients are not receiving IPs is the current issue that I'd like to tackle. Also, would it be feasible to use the router's DHCP to assign IPs rather than having the server do it? If so, what would be the most direct way to accomplish this? I appreciate any help in this matter. Thanks

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• Mail Server on Google Apps, Hotmail Blocks

  - by detay

  My company provides private research tools (sites) for companies. Each site has its own domain name and users. These sites need to be able to send outbound mail for notifications such as password reminders. We started using Google Apps for this purpose, but lately we are having tremendous problems with mailing, especially to hotmail. I added the SPF record as required. Mxtoolbox says my domains are not in any blacklists. I was told to contact https://postmaster.live.com/snds/addnetwork.aspx and add my network. Given that I am using google's mail servers for sending mail, should I add their IP address for registering my domain? Or should I add my server's IP even though I am not hosting the mail server on it? Here's an example of a returned message; > Delivered-To: [email protected] Received: by 10.112.1.195 with SMTP > id 3csp62757lbo; > Mon, 10 Dec 2012 10:42:55 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; > d=gmail.com; s=20120113; > h=mime-version:from:to:x-failed-recipients:subject:message-id:date > :content-type; > bh=x41JiCH75hsonh+5c/kzwIs7R8u4Hum2u396lkV3g2w=; > b=v+bBPvufqfVkNz2UrnhyyoGj1Cuwf6x/yMj0IXJgH27uJU7TqBOvbwnNHf33sQ7B9T > uGzxwryC2fmxBh72cGz1spwWK348nUp6KK73MXKnF8mpc3nPQ8Ke+EQpSPeJdq/7oZvd > scZTGpy//IiGEUDU5bJ7YPqYXQRycY5N6AF5iI4mWWwbS4opybp3IKpDDktu11p/YEEO > Fj9wnSCx3nLMXB/XZgSjjmnaluGhYNdh3JFtz83Vmr50qXTG/TuIXlkirP73GfGvIt2S > 7sy8/YdEbZR92mYe9wucditYr7MOuyjyYrZYCg+weXeTZiJX1PfBVieD+kD9MnCairnP > rQeQ== Received: by 10.14.215.197 with SMTP id e45mr52766237eep.0.1355164974784; > Mon, 10 Dec 2012 10:42:54 -0800 (PST) MIME-Version: 1.0 Return-Path: <> Received: by 10.14.215.197 with SMTP id > e45mr65950764eep.0; Mon, 10 Dec 2012 10:42:54 -0800 (PST) From: Mail > Delivery Subsystem <[email protected]> To: > [email protected] X-Failed-Recipients: ********@hotmail.fr > Subject: Delivery Status Notification (Failure) Message-ID: > <[email protected]> Date: Mon, 10 Dec 2012 > 18:42:54 +0000 Content-Type: text/plain; charset=ISO-8859-1 > > Delivery to the following recipient failed permanently: > > *********@hotmail.fr > > Technical details of permanent failure: Message rejected. See > http://support.google.com/mail/bin/answer.py?answer=69585 for more > information. > > ----- Original message ----- > > Received: by 10.14.215.197 with SMTP id > e45mr52766228eep.0.1355164974700; > Mon, 10 Dec 2012 10:42:54 -0800 (PST) Return-Path: <[email protected]> Received: from WIN-1BBHFMJGUGS ([91.93.102.12]) > by mx.google.com with ESMTPS id l3sm26787704eem.14.2012.12.10.10.42.53 > (version=TLSv1/SSLv3 cipher=OTHER); > Mon, 10 Dec 2012 10:42:54 -0800 (PST) Message-ID: <[email protected]> MIME-Version: 1.0 > From: [email protected] To: *********@hotmail.fr Date: Mon, 10 Dec > 2012 10:42:54 -0800 (PST) Subject: Rejoignez-nous sur achbanlek.com > Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: > base64 > > ----- End of message -----

  Read the article

• How is the PHP extensions/modules file structure logic based?

  - by dotpointer

  I'm trying to configure/build PHP 5.3.10 on Linux/Slackware 12 but the extensions appear in the wrong directory when I run make install. In the php.ini file is the extension dir defined: /usr/lib/php/extensions Problem is that when I run "make install" the newly built extensions are copied to a subfolder in extensions directory: /usr/lib/php/extensions/no-debug-non-zts-20090626 What am I supposed to do with this... copy the files down from the no-debug-non-zts-20090626 directory into the extensions directory, create symlinks from extensions to the modules in the no-debug-non-zts-20090626 directory (which will take a lot of time) or what? (I know I can do any of them, but I want to know the correct way...)

  Read the article

• Why won't Windows use the other CPU cores?

  - by revloc02

  In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

  Read the article

• crontab still sending emails even with > /dev/null

  - by user2344668

  I have a crontab (root) that runs a script and output is set to /dev/null but I always get the emails whenever it runs. I only want to receive error emails. # Rackspace driveclient update (12pm MST) 0 12 * * * /root/scripts/driveclient-update > /dev/null The only way I can get it to turn off is to use /dev/null 2&1 but then I won't get error emails. This is happening on three different CentOS servers, two are 6.3 and one is 6.4. NOTE: I have read over and over that /dev/null is supposed to send stdout there and prevent the email if there is nothing but stdout from the script, so at works for at least some people; I cannot figure out why it is not working on these servers. Here's an example of where /dev/null is supposed to work: http://www.alphadevx.com/a/384-Suppressing-Cron-Job-Email-Notifications

  Read the article

• Creating ip alias on bonded interface ie. bond0:1

  - by bobothechimp

  System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works (pinging on the local box) but it is not accessable from outside (iptables is turned off). In addition with this setup the normal network response started to decline, hanging for around a minute before I could get a prompt on login. Here are my config files: [root network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BONDING_OPTS="mode=1 miimon=100" BOOTPROTO=none ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.11 USERCTL=no [root network-scripts]# cat ifcfg-bond0:1 DEVICE=bond0:1 BOOTPROTO=static ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.12 USERCTL=no any thoughts?

  Read the article

• How to backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• If a cell contains a Symbol, then paste a Description into another cell

  - by Lola

  I'm working on rolling-up a series of charts. I'd like an easy way to summarize by category. The original looks like the sample below but by week for the entire year. I want to know all of the AD 1's, etc. I will need in CA (for each state) by Publication. so the end result would be CA AD 1 PUBLICATION 1 CA AD 2 PUBLICATION 1 CA AD 3 PUBLICATION 1 PUBLICATION 2 PUBLICATION 3 A B C D E 1 PUBLICATION1 CA TX NM AZ 2 AD 1 · 3 AD 2 · · · · 4 AD 3 · · · 5 PUBLICATION2 CA TX NM AZ 6 AD 1 7 AD 2 · · · 8 AD 3 · · · 9 PUBLICATION3 CA TX NM AZ 10 AD 1 11 AD 2 · · · 12 AD 3 · · · Thanks so much!

  Read the article

• Configure Virtualbox guest with static IP, SSH and internet access from host

  - by koskoz

  I have an Ubuntu Server 12 virtualbox guest running on a Windows 7 host which has a dynamic IP (and I don't wanna change this considering it's a laptop and I'm changing network frenquently). I want to have a static IP for my VM and a SSH access from my host but I still want to have the internet access on my VM. I tried added a second host only adapter and configured /etc/network/interface to set eth1 to a static ip, but I can't connect via SSH to it. Setting only adapter1 to host only works for SSH and static IP but I lose the internet access.

  Read the article

• Simple command line calculator

  - by ldigas

  Had one years ago (on Win 3.1 or '95, I'm not sure). Anyways, it was a really simple program. Stood somewhere in PATH and enabled you to do something of a kind calc 5 + 28.3*sqrt(12) and it spit out the result. Anyone know of any such these days? Doesn't need to do anything fancy ... maybe it would just be nice if it had support for exponentials, but that's it. Anyone? p.s. Not interested in full blown solutions like Python or MATLAB.

  Read the article

• How (much) is virtualization used today?

  - by BLAKE

  I know that where I have worked, I have pushed alot for virtualizing our servers. I think that it is much easier to implement and maintain than physical servers. I have been using Microsoft's Virtual Server 2005 R2 since it was released. Right now at my workplace we have 12 VMHosts that hold about 55 VMs. We have 6 other servers that we have been unable to convert to VMs. I want to know how other people in our field view virtualization. I know that I have had developers dislike the notion of VMs claiming major performance hits. What do other Sys Admins think about virtualized servers?

  Read the article

• mac os x, find all symbolic links that point to files on a different volume

  - by Eddified

  In my ~ dir, I have some symlinks that point to "/Volumes/Macintosh HD 2/..." and I want to find them all recursively. A look at the man page for 'find' says the '-lname' argument will search the symbolic link contents. It appears to work, but not recursively: $ pwd /Users/myusername $ sudo find . -lname '/Volumes*' $ cd Documents/ $ sudo find . -lname '/Volumes*' ./Documents on Win7 ./work.rtf What's going on? How can I make this work recursively? -- The 'find' program is supposed to always work recursively. I checked perms, they look ok, but as you can see I used "sudo" just to be sure... no dice. $ ls -ld Documents/ drwx------+ 14 myusername staff 476 Jan 12 16:32 Documents/

  Read the article

• Restore Point area getting deleted

  - by PaoloFCantoni

  Hi, I'm running a multi-boot scenario (which I have been successfully on a number of machines for a number of years). I have Windows 7 (32 bit) on one partition and Windows 7 (64 bit) on another and a common data partition (which happens to store the user hives for each OS instance). For some reason, on one particular machine (a HP Pavilion notebook) the restore points get trashed after a reboot. I can create them (both manually and automatically), but after some (but not all) reboots the restore points get trashed. I have all three partitions set (on both OSs) to hold restore information. This setup has worked successfully on other machines for at least 12 months. I'm out of ideas... I DO need the restore points as I do "bleeding edge" stuff and they've saved my bacon on other machines in the past... TIA, Paolo

  Read the article

• Printing Booklet Page Size in Adobe Reader 4-in-1

  - by Justin Nathanael Waters

  So I have a 70 page pdf document that I'm trying to condense to a small booklet. I tried creating a formula to manually to perform it but it got ugly fast. 35,36,34,37,17,54,16,55,33,38,32,39,15,56,14,57,31,40,30,41,13,58,12,59 29,42,28,43,11,60,10,61,27,44,26,45,9,62,8,63,25,46,24,47,7,64,6,65 23,48,22,49,5,66,4,67,21,50,20,51,3,68,2,69,19,52,18,53,1,70 Once I print the booklet I should be able to cut the sheets in half and set the bottom half behind the top and staple it for a simple book. Which means Page 1 should have pages 35,36,17,54,34,37,16,55 Page 2 should have pages 33,38,15,56,32,39,14,57 And several pages later Page 9 should have pages 19,52,1,70,18,53 But manually doing this is a headache and it seems like the booklet function should contain functionality that can perform this. I'm using a commercial Konica Minolta C452

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• Apache Ubuntu SSL Configuration

  - by JSP

  Where besides the vhost configuration can SSL be configured? I see an SSL configuration in sites-available but it's not an enabled vhost (and the certificate it points to is expired). Using apache2 -V shows me the configuration directory is /etc/apache2 but I can not for the life of me find the SSL configuration and it's driving me crazy. Any suggestions on where to look or what I'm missing? Ubuntu 12 Linux ip-10-39-119-18 3.2.0-23-virtual #36-Ubuntu SMP Tue Apr 10 22:29:03 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

  - by MK.

  I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

  Read the article

• re-direct SSL pages using header statement based on port

  - by bob's your brother

  I found this in the header.php file of a e-commerce site. Is this better done in a .htaccess file. Also what would happen to any post parameters that get caught in the header statement. // flip between secure and non-secure pages $uri = $_SERVER['REQUEST_URI']; // move to secure SSL pages if required if (substr($uri,1,12) == "registration") { if($_SERVER['SERVER_PORT'] != 443) { header("HTTP/1.1 301 Moved Permanently"); header("Location: https://".$_SERVER['HTTP_HOST'].$_SERVER['REQUEST_URI']); exit(); } } // otherwise us regular non-SSL pages else { if($_SERVER['SERVER_PORT'] == 443) { header("HTTP/1.1 301 Moved Permanently"); header("Location: http://".$_SERVER['HTTP_HOST'].$_SERVER['REQUEST_URI']); exit(); } }

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• Where can I find a good, tab-less privacy filter for my monitor?

  - by KeyStroke

  Hi, I have an ASUS laptop with a 14" monitor (12" by 7" to be more specific), and I've been looking for a decent privacy filter that I can use with for, yet I couldn't find any. The problem with the filters I've found is that they all use those ugly "tabs" that you have to stick on the sides of your monitor in order to slip the filter in. I'm looking for ones that are like HP privacy filter, where parts of it goes under the frame of the monitor to hold it in place. Too bad HP doesn't sell filters that fit my screen. So, any idea where I can get a good privacy filter? Your help is so much appreciated

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >