Search Results

Search found 6581 results on 264 pages for 'label printer'.

Page 247/264 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • LUKS with LVM, mount is not persistent after reboot

    - by linxsaga
    I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

    Read the article

  • External hard drive FAT32 to NTFS conversion fails

    - by Pieter
    I'm trying to convert the FAT32 file system of an external hard drive to NTFS. Here's what happened: C:\Windows\system32>chkdsk G: The type of the file system is FAT32. Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. C:\Windows\system32>cd \ C:\>convert g: /fs:ntfs The type of the file system is FAT32. Enter current volume label for drive G: PIETEREXT Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. Determining disk space required for file system conversion... Total disk space: 488384001 KB Free space on volume: 177675584 KB Space required for conversion: 975155 KB Converting file system The conversion failed. G: was not converted to NTFS I looked at the TechNet page for my error, but after closing every app the conversion was still failing halfway through. Why does it keep failing? I kept an eye on Task Manager but it didn't look like my system resources were near depletion. I'm using Windows 8.

    Read the article

  • OSX: Howto start VirtualBox VM on startup?

    - by snies
    The Question How do i start this Wiki VM at the startup of the OSX Server? I am running OSX Server 10.6.8 and VirtualBox 4.1.8 r75467 and a Debian Linux VM (called "wiki"). . What I tried so far Following this article: http://mikkel.hoegh.org/blog/2010/12/23/run-virtualbox-boot-mac-os-x/, i have wrote this plist and placed it in /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist: <plist version="1.0"> <dict> <key>Label</key> <string>bar.foo.WikiVirtualBox</string> <key>ProgramArguments</key> <array> <string>/usr/bin/VBoxHeadless</string> <string>-s</string> <string>wiki</string> </array> <key>RunAtLoad</key> <true></true> <key>UserName</key> <string>root</string> <key>WorkingDirectory</key> <string>/var/root</string> <key>StandardErrorPath</key> <string>/var/log/bar.foo.WikiVirtualBox.stderr.log</string> <key>StandardOutPath</key> <string>/var/log/bar.foo.WikiVirtualBox.stdout.log</string> </dict> </plist> and told launchd to start it: sudo launchctl load -w /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist . The Logfile But the VM doesn't start. A Look at tail -f /var/log/system.log shows: sudo[1909]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/bin/launchctl load -w /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist VBoxSVC[1914]: 3891612: (connectAndCheck) Untrusted apps are not allowed to connect to or launch Window Server before login. VBoxSVC[1914]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. com.apple.launchd[1] (bar.foo.WikiVirtualBox[1910]): Exited with exit code: 1 When i log into the server via ssh (so no login window opened) i can run: /usr/bin/VBoxHeadless -s wiki and it works. So i don't understand the error above.

    Read the article

  • Use launchctl to fire an AppleScript script periodically

    - by Daktari
    I have written an AppleScript that lets me back up a particular file. The script runs fine inside AppleScript Editor: it does what it's supposed to do perfectly. So far so good. Now I'd like to run this script at timed intervals. So I use launchctl & .plist to make this happen. That's where the trouble starts. the script is loaded at set interval by launchctl the AppleScript Editor (when open) brings its window (with that script) to the foreground but no code is executed when AppleScript Editor is not running, nothing seems to be happening at all Any ideas as to why this is not working? -- After editing (as per Daniel Beck's suggestions) my plist now looks like: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>KeepAlive</key> <false/> <key>Label</key> <string>com.opera.autosave</string> <key>ProgramArguments</key> <array> <string>osascript</string> <string>/Users/user_name/Library/Scripts/opera_autosave_bak.scpt</string> </array> <key>StartInterval</key> <integer>30</integer> </dict> </plist> and the AppleScript I'm trying to run: on appIsRunning(appName) tell application "System Events" to (name of processes) contains appName end appIsRunning --only run this script when Opera is running if appIsRunning("Opera") then set base_path to "user_name:Library:Preferences:Opera Preferences:sessions:" set autosave_file to "test.txt" set autosave_file_old to "test_old.txt" set autosave_file_older to "test_older.txt" set autosave_file_oldest to "test_oldest.txt" set autosave_path to base_path & autosave_file set autosave_path_old to base_path & autosave_file_old set autosave_path_older to base_path & autosave_file_older set autosave_path_oldest to base_path & autosave_file_oldest set copied_file to "test copy.txt" set copied_path to base_path & copied_file tell application "Finder" duplicate file autosave_path delete file autosave_path_oldest set name of file autosave_path_older to autosave_file_oldest set name of file autosave_path_old to autosave_file_older set name of file copied_path to autosave_file_old end tell end if

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

    - by Hammer Bro.
    Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • Resizing Partitions on Live RHEL/cPanel Server

    - by Timothy R. Butler
    I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

    Read the article

  • Converting an EC2 AMI to vmdk image

    - by Reed G. Law
    I've come quite close to getting Amazon Linux to boot inside VirtualBox, thanks to this answer and these websites. A quick overview of the steps I've taken: Launch EC2 instance with Amazon Linux 2011.09 64-bit AMI dd the contents of the EBS volume over ssh to a local image file. Mount the image file as a loopback device and then to a local mount point. Create a new empty disk image file, partition with an offset for a bootloader, and create an ext4 filesystem. Mount the new image's partition and copy everything from the EC2 image. Install grub (using Ubuntu's grub-legacy-ec2 package, not grub2). Convert the image file to vmdk using qemu-img. Create a new VirtualBox VM with the vmdk. Now the VM boots, grub loads, and the kernel is found. But it fails when it tries to mount the root device: dracut Warning: No root device "block:/dev/xvda1" found dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. dracut Warning: Signal caught! dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35.14-107.1.39.amzn1.x86_64 #1 I have tried changing /boot/grub/menu.lst to find the root device by label and UUID, but nothing works. I'm guessing the xen kernel is not compatible with VirtualBox. The reasoning behind all this effort is to make a Vagrant box that is as close to possible as the production enviroment, so deploys can be tested locally. I know it's cheap to do test runs on EC2, but poor connectivity often ruins the experience. Plus it would be really nice to have a virtual machine with the production environment so that co-workers don't have to install everything under the sun just to get up and running with app development. If I were to try running a different kernel, what kernel could I get to be as close as possible to Amazon Linux 2011.09?

    Read the article

  • Apache strace to hunt down a memory leak

    - by Zipp
    We have a server with a memory issue: the server keeps allocating itself memory and doesn't release it. We're running Apache. I set MaxReqsPerClient to a really low value just so the threads don't hold a lot of memory, but has anyone seen calls like this? Am I wrong in thinking that it's probably Drupal pulling too much data back from the cache in DB? read(52, "h_index\";a:2:{s:6:\"weight\";i:1;s"..., 6171) = 1368 read(52, "\";a:2:{s:6:\"author\";a:3:{s:5:\"la"..., 4803) = 1368 read(52, ":\"description\";s:19:\"Term name t"..., 3435) = 1368 read(52, "abel\";s:4:\"Name\";s:11:\"descripti"..., 2067) = 1368 read(52, "ions\";a:2:{s:4:\"form\";a:3:{s:4:\""..., 16384) = 708 brk(0x2ab554396000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55f653000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55f753000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55f853000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55f953000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55fa53000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55fb53000 brk(0x2ab554356000) = 0x2ab5542f5000 mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab55fc53000 poll([{fd=52, events=POLLIN|POLLPRI}], 1, 0) = 0 (Timeout) write(52, "d\0\0\0\3SELECT cid, data, created, "..., 104) = 104 read(52, "\1\0\0\1\5E\0\0\2\3def\23drupal_database_nam"..., 16384) = 1368 read(52, ";s:11:\"granularity\";a:5:{s:4:\"ye"..., 34783) = 1368 read(52, ":4:\"date\";}s:9:\"datestamp\";a:9:{"..., 33415) = 1368 read(52, "\";i:0;s:15:\"display_default\";i:0"..., 32047) = 1368 read(52, "e as an integer value.\";s:8:\"set"..., 30679) = 1368 read(52, "label' pairs, i.e. 'Fraction': 0"..., 29311) = 1368 top (the procs just keep growing in memory..): 12845 apache 15 0 581m 246m 37m S 0.0 4.1 0:17.39 httpd 12846 apache 15 0 571m 235m 37m S 0.0 4.0 0:12.13 httpd 12833 apache 15 0 420m 117m 37m S 0.0 2.0 0:06.04 httpd 12851 apache 15 0 412m 113m 37m S 0.0 1.9 0:05.32 httpd 13871 apache 15 0 409m 109m 37m S 0.0 1.8 0:04.90 httpd 12844 apache 15 0 407m 108m 37m S 0.0 1.8 0:04.50 httpd 13870 apache 15 0 407m 108m 37m S 0.3 1.8 0:03.50 httpd 14903 apache 15 0 402m 103m 37m S 0.3 1.7 0:01.29 httpd 14850 apache 15 0 397m 100m 37m S 0.0 1.7 0:02.08 httpd 14907 apache 15 0 390m 93m 36m S 0.0 1.6 0:01.32 httpd 13872 apache 15 0 386m 91m 37m S 0.0 1.5 0:03.13 httpd 12843 apache 15 0 373m 81m 37m S 0.0 1.4 0:02.51 httpd 14901 apache 15 0 370m 75m 33m S 0.0 1.3 0:00.78 httpd 14904 apache 15 0 335m 29m 15m S 0.0 0.5 0:00.26 httpd

    Read the article

  • Proper Imaging Procedures to Restore and Deploy Image with Separate System Reserved Partition

    - by alharaka
    UPDATE: As per my experience here, no one responded. If I do not hear back from TechNet forum members about it, I will post a bounty here, if it makes a difference. I have banged my head against a wall for what seems like all week. I am going to explain my simple procedure, and how none of it, absolutely none, seems to work afterword despite few alternatives and everyone on the internet telling assuming this is how to do it. Diskpart Commands to Create FS Structure REM Select the disk targeted for deployment. REM REM NOTE: Usually disk 0, but drive failure can make it external USB REM media. This will erase the drive regardless! select disk 0 REM Remove previous formatting. clean REM Create System Reserved partition bootloader and files. create partition primary size=100 REM Format the volume format fs=ntfs label="System Reserved" quick override noerr REM Assign the System Reserved partition the D: mount for now assign letter=C REM The main system partition, size not specified to occupy whole drive. create partition primary REM Format the volume format fs=ntfs quick override noerr REM Assign the OS partition the D: mount for now assign letter=D REM Make this the active/bootable partition. sel disk 0 sel partition 1 active REM Close out the diskpart session. exit Now, I thought this was madness, but it turns out the System Reserved partition and standard "System Partition" (C:, commonly both the boot and system volumes where you find the Windows directory AND the bootmgr/ntldr hardware files, this is where Windows 7 diverges) as mounted in the Windows PE session where I run these commands do not matter. See reference here. Since this needs to be BitLocker-ready, enter this crappy System Reserved partition that is separate 100MB of awesome that goes before the regular boot volume. I do this, then I proceed to the next step. Deploy System Reserved and Normal System Images REM C is still the "System Reserved Partition", and the image is just like it sounds. imagex /apply G:\images\systemreserved.wim 1 C: REM D is now what will be the C: system partition on reboot, supposedly. imagex /apply G:\images\testimage.wim 1 D: Reboot the system Now, the images I just captured should look good. This is not even sysprepped, but reapplying the same fscking image I prepared on the same reference workstation hours before. Problem is I get 0xc000000e could not detect the accessible boot device \Windows\system32\winload.exe or different kinds of nonsense revolving around being able to find the boot volume with all the right files. I try different variations of things, now none of them work. I tried repairs with bcdboot, with a fresh System Reserved partition or not, bootrec, and maually editing the damn BCD store with bcdedit. I tried finalizing the above process with and without bootsect /nt60 C: /force. I need to wrap up and automate this procedure. What am I doing wrong that does not make the image happy, but really just miserable.

    Read the article

  • Kernel upgrade CentOS 5.3 mount: could not find filesystem '/dev/root'

    - by matt
    We have a CentOS 5.3 x64 server that by default runs kernel version 2.6.18-164.11.1 and we are attempting to upgrade the box to 2.6.31.12 The drive is LVM +ext3, and the problem I'm having is when I upgrade the kernel and attempt to boot from it, no matter what version of the kernel I use, I get /dev/root not found towards the end of the boot process, and the kernel panics, and than reboots. I'm installing the kernel exactly as it says in this doc. I've tried it "The centOS way " using make rpm and than installing that. I've updated my mkinitrd. The most interesting part of this problem is that it has been so frustrating that I decided to try and clean install centos on an identical machine without LVM, and the result is EXACTLY the same. After upgrading the kernel, I get /dev/root not found. Does anyone know how to fix this, or what information would be relevant to remedy it? I'm open to try anything at this point. One more interesting thing about this problem is that in the new version of the kernel, during boot it complains that dm-mapper is started twice, than panics right after that. I've tried this with other kernel versions, and the result is the same. What am I missing here? If you need any more files, please just ask. Linux cg 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.31.12-rt20) //NOT WORKING!!!! root (hd0,0) kernel /vmlinuz-2.6.31.12-rt20 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.31.12-rt20.img title CentOS (2.6.18-164.11.1.el5) //WORKING!! root (hd0,0) kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.18-164.11.1.el5.img

    Read the article

  • Starting php-cgi at boot on mac os x 10.6.8

    - by nikhil
    I'm new to mac os, I have installed and configured nginx with php-fastcgi. I need to run this command in a terminal and keep that terminal open to access php files from my browser. php-cgi -b 127.0.0.1:9000 -q Here's the plist that I wrote by looking up sources on the internet <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Debug</key> <false/> <key>EnvironmentVariables</key> <dict> <key>PHP_FCGI_CHILDREN</key> <string>2</string> <key>PHP_FCGI_MAX_REQUESTS</key> <string>1000</string> </dict> <key>RunAtLoad</key> <true/> <key>KeepAlive</key> <true/> <key>UserName</key> <string>nikhil</string> <key>Label</key> <string>php-fastcgi</string> <key>ProgramArguments</key> <array> <string>/usr/bin/php-cgi</string> <string>-b 127.0.0.1:9000</string> <string>-q</string> </array> </dict> </plist> I'm loading it using launchctl load -w ~/Library/LaunchAgents/php-fastcgi.plist without any success, can anyone tell me how this can be done.

    Read the article

  • Effecient organization of spare cables and hardware

    - by Jake Wharton
    As many of you also likely do, I have a growing collection of cables, hardware, and spare parts (screws, connectors, etc.). I'm looking to find a good system of organization so that everything isn't a tangled mess, mismatched, and potentially able to be damaged. Since the the three things listed above are all have varying sizes and degrees of delicacy this poises an interesting problem. Presently I have those cheap plastic storage bins you find at Wal-mart for everything. Cables that were once wrapped neatly have become tangled due to numerous "I know I have a cable for this" moments. Hardware is mixed in other bins with odds and ends with no protection from each other. NICs, CPUs, and HDDs are all interacting and likely causing damage. Finally there are stray parts sprinkled amongst these two both in plastic bags and loose. I'm looking to unify this storage into a controlled chaos. Here are my thoughts: Odds and ends are the easiest. Screws, connectors, and small electronic parts lend themselves perfectly to tackle boxes and jewelry boxes. Since these are usually dynamically compartmentalized I can adjust for the contents and label them on the outside or inside of the lid. Cables are easily wrangled with short velcro strips but that doesn't stop them from being all mixed in together. Hardware is the worst offender. Size, shape, and degree of delicacy changes with nearly every piece. I'm willing to sacrifice a bit of organization for a somewhat efficient manner. What are all your thoughts? What is the best type of tackle or jewelry box to use? Most of them are cheap and flimsy. Is there a better alternative? How can I organize cables to know exactly (within reason) where one is? What about associating cables with hardware (Wall adapter to router, etc.)? What kind of storage unit lends itself to all shapes of hardware? Do I need to separate by size or degree of delicacy for better organization?

    Read the article

  • mounting ext4 fs with block size of 65536

    - by seaquest
    I am doing some benchmarking on EXT4 performance on Compact Flash media. I have created an ext4 fs with block size of 65536. however I can not mount it on ubuntu-10.10-netbook-i386. (it is already mounting ext4 fs with 4096 bytes of block sizes) According to my readings on ext4 it should allow such big block sized fs. I want to hear your comments. root@ubuntu:~# mkfs.ext4 -b 65536 /dev/sda3 Warning: blocksize 65536 not usable on most systems. mke2fs 1.41.12 (17-May-2010) mkfs.ext4: 65536-byte blocks too big for system (max 4096) Proceed anyway? (y,n) y Warning: 65536-byte blocks too big for system (max 4096), forced to continue Filesystem label= OS type: Linux Block size=65536 (log=6) Fragment size=65536 (log=6) Stride=0 blocks, Stripe width=0 blocks 19968 inodes, 19830 blocks 991 blocks (5.00%) reserved for the super user First data block=0 1 block group 65528 blocks per group, 65528 fragments per group 19968 inodes per group Writing inode tables: done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@ubuntu:~# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 4cf3f507-e7b4-463c-be11-5b408097099b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 19968 Block count: 19830 Reserved block count: 991 Free blocks: 18720 Free inodes: 19957 First block: 0 Block size: 65536 Fragment size: 65536 Blocks per group: 65528 Fragments per group: 65528 Inodes per group: 19968 Inode blocks per group: 78 Flex block group size: 16 Filesystem created: Sat Feb 5 14:39:55 2011 Last mount time: n/a Last write time: Sat Feb 5 14:40:02 2011 Mount count: 0 Maximum mount count: 37 Last checked: Sat Feb 5 14:39:55 2011 Check interval: 15552000 (6 months) Next check after: Thu Aug 4 14:39:55 2011 Lifetime writes: 70 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: afb5b570-9d47-4786-bad2-4aacb3b73516 Journal backup: inode blocks root@ubuntu:~# mount -t ext4 /dev/sda3 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/sda3, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

    Read the article

  • Pinning based on origin of a reprepro repository.

    - by Shtééf
    I'm on Ubuntu 10.04, and trying to set up a repository using reprepro. I'd also like the pin everything in that repository to be preferred over anything else, even if packages are older versions. (It will only contain a select set of packages.) However, I cannot seem to get the pinning to work, and believe it has something to do with the repository side of things, rather than the apt configuration on the client. I've taken the following steps to set up my repository Installed a web server (my personal choice here is Cherokee), Created the directory /var/www/apt/, Created the file conf/distributions, like so: Origin: Shteef Label: Shteef Suite: lucid Version: 10.04 Codename: lucid Architectures: i386 amd64 source Components: main Description: My personal repository Ran reprepro export from the /var/www/apt/ directory. Now on any other machine, I can add this (empty) repository over HTTP to my /etc/apt/sources.list, and run apt-get update without any errors: Ign http://archive.lan lucid Release.gpg Ign http://archive.lan/apt/ lucid/main Translation-en_US Get:1 http://archive.lan lucid Release [2,244B] Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Hit http://archive.lan lucid/main Packages Hit http://archive.lan lucid/main Sources In my case, now I want to use an old version of Asterisk, namely Asterisk 1.4. I rebuilt the asterisk-1:1.4.21.2~dfsg-3ubuntu2.1 package from Ubuntu 9.04 (with some small changes to fix dependencies) and uploaded it to my repository. At this point I can see the new package in aptitude, but it naturally prefers the newer Asterisk 1.6 currently in the Ubuntu 10.04 repositories. To try and fix that, I have created /etc/apt/preferences.d/personal like so: Package: * Pin: release o=Shteef Pin-Priority: 1000 But when I try to install the asterisk package, it will still prefer the 1.6 version over my own 1.4 version. This is what apt-cache policy asterisk shows: asterisk: Installed: (none) Candidate: 1:1.6.2.5-0ubuntu1 Version table: 1:1.6.2.5-0ubuntu1 0 500 http://nl.archive.ubuntu.com/ubuntu/ lucid/universe Packages 1:1.4.21.2~dfsg-3ubuntu2.1shteef1 0 500 http://archive.lan/apt/ lucid/main Packages Clearly, it is not picking up my pin. In fact, when I run just apt-cache policy, I get the following: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.lan/apt/ lucid/main Packages origin archive.lan 500 http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Packages release v=10.04,o=Ubuntu,a=lucid-security,n=lucid,l=Ubuntu,c=multiverse origin security.ubuntu.com [...] Unlike Ubuntu's repository, apt doesn't seem to pick up a release-line at all for my own repository. I'm suspecting this is the cause why I can't pin on release o=Shteef in my preferences file. But I can't find any noticable difference between my repository's Release files and Ubuntu's that would cause this. Is there a step I've missed or mistake I've made in setting up my repository?

    Read the article

  • Why is mount -a not mounting fuse drive properly when executed remotely (via Fabric)?

    - by Jim D
    This is a weird bug and I'm not sure where it's coming from. Here's a quick run down of what I'm doing. I'm trying to mount a FUSE drive to an Amazon EC2 instance running Ubuntu 10.10 using s3fs (FUSE over Amazon). s3fs is compiled from source according to the instructions etc. I've also added an entry to /etc/fstab so that the drive mounts on boot. Here's what /etc/fstab looks like: # /etc/fstab: static file system information. # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 LABEL=uec-rootfs / ext4 defaults 0 0 /dev/sda2 /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 /dev/sda3 none swap sw,comment=cloudconfig 0 0 s3fs#mybucket /mnt/s3/mybucket fuse default_acl=public-read,use_cache=/tmp,allow_other 0 0 So the good news is that this works fine. On reboot the connection mounts correctly. I can also do: $ sudo umount /mnt/s3/mybucket $ sudo mount -a $ mountpoint /mnt/s3/mybucket /mnt/s3/mybucket is a mountpoint Great, right? Well here's the problem. I'm using Fabric to automate the process of building and managing this instance. I noticed I was getting this error message when using Fabric to build s3fs and set up the mount process: mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected I isolated it down the the problem and built a fabric task that reproduces the problem: def remount_s3fs(): sudo("mount -a") Which does: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: mount -a [And yes, I was sure to unmount it before running this task.] When I check the mount using mountpoint I get: $ mountpoint /mnt/s3/mybucket mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected Done. But if I run sudo mount -a at the command line, it works. Hrm. Here is that fab task output again, this time in full debug mode: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a" Again, I get that transport endpoint not connected error. I've also tried copying and pasting the exact command run into my ssh session (i.e. sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a") and it works fine. So...that's my problem. Any ideas?

    Read the article

  • Cannot install grub to RAID1 (md0)

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

    Read the article

  • When upgrading from Vista to Windows 7 on a DELL laptop, how do I know which drivers to reinstall an

    - by msorens
    According to Dell's upgrade page for Vista to Windows 7, after using the upgrade assistant the final step is to install drivers. They refer to this page for the order of driver installation, listing 9 items. From there I go to the Dell Drivers and Downloads page, enter my system tag, and get a list of the downloads available for my specific box. That page, by the way, has a link to driver install instructions that lists 10 rather than 9 items. Going to Drivers Help in the side panel and clicking on "In what order should drivers be installed?" shows yet a third list, this one containing 13 items. Not surprisingly, the order of these 3 lists of drivers are not quite the same for the common items! Furthermore, of the 26 files Dell's site recommends for my machine, there are several not shown on any of the 3 lists! I can make determinations for some of these: 6 of them are "applications" so I know which of those I want and that they could probably be safely installed after all drivers. BIOS: I would think this should be unaffected by an OS upgrade so could be skipped. Two tools in the diagnostics category: could probably be done after all drivers. That leaves just a CD/DVD driver and a webcam driver unaccounted for. So my two related questions are these: How critical is the driver installation order and which one do I follow? (Keep in mind this is for an upgrade, not a fresh install.) Where in the order do I insert the CD/DVD and the webcam drivers (if needed) ? Dell's driver download page provides (in theory) the list of all downloads relevant to my specific machine, via the service tag. But do I actually need to reinstall all of them? some? none? How does one determine this? They do label each with Recommended or Optional, so do I need to reinstall all the recommended ones? (Part of the reason for my perplexed frown is that I wonder why I would need to reinstall a CD/DVD driver since I would already be using the drive to install the OS!)

    Read the article

  • How can I fix Problems with interlaced video jerking/flicking when playedback on DVD players? (Mixin

    - by Simon P Stevens
    I'm trying to make a DVD and the final DVD jerks when played on standalone DVD players. It seems to play fine on PCs. I think the problem may be to do with interlacing settings when rendering the final output, but I'll outline the whole editing process I have followed in case I've made a mistake somewhere else. Most of the footage comes from a sony handy cam (one of those mini DVD ones) so isn't great quality. It was set to "high quality" (haha) and 16:9 aspect ratio when it was recorded. I copy the files directly from the mini DVDs onto the hard drive and import them into Cinelerra. In Cinelerra I set the format to 25fps, 720x576, RGBA-8bit, 16:9, interlaced bottom fields first. When I've finished the editing, I add a Fields to frames effect (set to bottom first) to each video track. I render to audio and video separately: Audio: AC3, 128kbps Video: YUV4MPEG steam, video pipe settings: ffmpeg -f yuv4mpegpipe -i - -y -target dvd -flags +ilme+ildct mpeg2video % Cinelerra often crashes during the rendering, so I set it to generate a new video file at each label, and combine them using cat when I've got a sucesful render of each one. Once I've combined them, I use mencoder to re-index them: mencoder -forceidx -oac copy -ovc copy merged.m2v -o mergedReIndexed.m2v I combine the audio and video files using ffmpeg: ffmpeg -i AudioFile.ac3 -i VideoFile.m2v -target dvd -flags +ilme+ildct FinalMovie.mpg Then I build the menus with spumux and I create the DVD file system with dvdauthor, and finally I write it do a dvd-r like this: nice -n -20 growisofs -dvd-compat -speed=2 -Z /dev/dvd -dvd-video -V VIDEO ./ && eject /dev/dvd Originally, when I did it the DVD flickered badly, so as suggested in a guide I added the fields to frames effect in cinelerra. Now it doesn't "flicker", but has become "jerky" when there is lots of motion, particularly when the camera is moving, so the whole background moves. This is what I've tried so far: Removed "mpeg2video" from cinelerra video render pipe. Removed +ilme from render pipe. Removed +ildct from render pipe. Removed +ilme from render audio/video rejoin command. Removed +ildct from render audio/video rejoin command. Added -alt to render pipe. Added -alt to render audio/video rejoin command. Tried with and without the frames to fields effect in Cinelerra. and various combinations of the above. I've also tried this: change the Cinelerra fps to 50, use fields to frames (instead of frames to fields), render to an intermediate QTforlinux jpeg video stream, re-importing that back into Cinelerra, adding a frames to fields effect and then rendering that output as normal (@25fps), and I still have the same problem. Has anyone experienced this "jerking" playback before? Can anyone give any suggestions on how to fix it? (Like I say, it plays back fine on a PC, but not on any of the standalone players I've tried)

    Read the article

  • ZFS Recover from Faulted Pool State

    - by nickv2002
    I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

    Read the article

  • Is there a Math.atan2 substitute for j2ME? Blackberry development

    - by Kai
    I have a wide variety of locations stored in my persistent object that contain latitudes and longitudes in double(43.7389, 7.42577) format. I need to be able to grab the user's latitude and longitude and select all items within, say 1 mile. Walking distance. I have done this in PHP so I snagged my PHP code and transferred it to Java, where everything plugged in fine until I figured out J2ME doesn't support atan2(double, double). So, after some searching, I find a small snippet of code that is supposed to be a substitute for atan2. Here is the code: public double atan2(double y, double x) { double coeff_1 = Math.PI / 4d; double coeff_2 = 3d * coeff_1; double abs_y = Math.abs(y)+ 1e-10f; double r, angle; if (x >= 0d) { r = (x - abs_y) / (x + abs_y); angle = coeff_1; } else { r = (x + abs_y) / (abs_y - x); angle = coeff_2; } angle += (0.1963f * r * r - 0.9817f) * r; return y < 0.0f ? -angle : angle; } I am getting odd results from this. My min and max latitude and longitudes are coming back as incredibly low numbers that can't possibly be right. Like 0.003785746 when I am expecting something closer to the original lat and long values (43.7389, 7.42577). Since I am no master of advanced math, I don't really know what to look for here. Perhaps someone else may have an answer. Here is my complete code: package store_finder; import java.util.Vector; import javax.microedition.location.Criteria; import javax.microedition.location.Location; import javax.microedition.location.LocationException; import javax.microedition.location.LocationListener; import javax.microedition.location.LocationProvider; import javax.microedition.location.QualifiedCoordinates; import net.rim.blackberry.api.invoke.Invoke; import net.rim.blackberry.api.invoke.MapsArguments; import net.rim.device.api.system.Bitmap; import net.rim.device.api.system.Display; import net.rim.device.api.ui.Color; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.Graphics; import net.rim.device.api.ui.Manager; import net.rim.device.api.ui.component.BitmapField; import net.rim.device.api.ui.component.RichTextField; import net.rim.device.api.ui.component.SeparatorField; import net.rim.device.api.ui.container.HorizontalFieldManager; import net.rim.device.api.ui.container.MainScreen; import net.rim.device.api.ui.container.VerticalFieldManager; public class nearBy extends MainScreen { private HorizontalFieldManager _top; private VerticalFieldManager _middle; private int horizontalOffset; private final static long animationTime = 300; private long animationStart = 0; private double latitude = 43.7389; private double longitude = 7.42577; private int _interval = -1; private double max_lat; private double min_lat; private double max_lon; private double min_lon; private double latitude_in_degrees; private double longitude_in_degrees; public nearBy() { super(); horizontalOffset = Display.getWidth(); _top = new HorizontalFieldManager(Manager.USE_ALL_WIDTH | Field.FIELD_HCENTER) { public void paint(Graphics gr) { Bitmap bg = Bitmap.getBitmapResource("bg.png"); gr.drawBitmap(0, 0, Display.getWidth(), Display.getHeight(), bg, 0, 0); subpaint(gr); } }; _middle = new VerticalFieldManager() { public void paint(Graphics graphics) { graphics.setBackgroundColor(0xFFFFFF); graphics.setColor(Color.BLACK); graphics.clear(); super.paint(graphics); } protected void sublayout(int maxWidth, int maxHeight) { int displayWidth = Display.getWidth(); int displayHeight = Display.getHeight(); super.sublayout( displayWidth, displayHeight); setExtent( displayWidth, displayHeight); } }; add(_top); add(_middle); Bitmap lol = Bitmap.getBitmapResource("logo.png"); BitmapField lolfield = new BitmapField(lol); _top.add(lolfield); Criteria cr= new Criteria(); cr.setCostAllowed(true); cr.setPreferredResponseTime(60); cr.setHorizontalAccuracy(5000); cr.setVerticalAccuracy(5000); cr.setAltitudeRequired(true); cr.isSpeedAndCourseRequired(); cr.isAddressInfoRequired(); try{ LocationProvider lp = LocationProvider.getInstance(cr); if( lp!=null ){ lp.setLocationListener(new LocationListenerImpl(), _interval, 1, 1); } } catch(LocationException le) { add(new RichTextField("Location exception "+le)); } //_middle.add(new RichTextField("this is a map " + Double.toString(latitude) + " " + Double.toString(longitude))); int lat = (int) (latitude * 100000); int lon = (int) (longitude * 100000); String document = "<location-document>" + "<location lon='" + lon + "' lat='" + lat + "' label='You are here' description='You' zoom='0' />" + "<location lon='742733' lat='4373930' label='Hotel de Paris' description='Hotel de Paris' address='Palace du Casino' postalCode='98000' phone='37798063000' zoom='0' />" + "</location-document>"; // Invoke.invokeApplication(Invoke.APP_TYPE_MAPS, new MapsArguments( MapsArguments.ARG_LOCATION_DOCUMENT, document)); _middle.add(new SeparatorField()); surroundingVenues(); _middle.add(new RichTextField("max lat: " + max_lat)); _middle.add(new RichTextField("min lat: " + min_lat)); _middle.add(new RichTextField("max lon: " + max_lon)); _middle.add(new RichTextField("min lon: " + min_lon)); } private void surroundingVenues() { double point_1_latitude_in_degrees = latitude; double point_1_longitude_in_degrees= longitude; // diagonal distance + error margin double distance_in_miles = (5 * 1.90359441) + 10; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, 45); double lat_limit_1 = latitude_in_degrees; double lon_limit_1 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, 135); double lat_limit_2 = latitude_in_degrees; double lon_limit_2 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, -135); double lat_limit_3 = latitude_in_degrees; double lon_limit_3 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, -45); double lat_limit_4 = latitude_in_degrees; double lon_limit_4 = longitude_in_degrees; double mx1 = Math.max(lat_limit_1, lat_limit_2); double mx2 = Math.max(lat_limit_3, lat_limit_4); max_lat = Math.max(mx1, mx2); double mm1 = Math.min(lat_limit_1, lat_limit_2); double mm2 = Math.min(lat_limit_3, lat_limit_4); min_lat = Math.max(mm1, mm2); double mlon1 = Math.max(lon_limit_1, lon_limit_2); double mlon2 = Math.max(lon_limit_3, lon_limit_4); max_lon = Math.max(mlon1, mlon2); double minl1 = Math.min(lon_limit_1, lon_limit_2); double minl2 = Math.min(lon_limit_3, lon_limit_4); min_lon = Math.max(minl1, minl2); //$qry = "SELECT DISTINCT zip.zipcode, zip.latitude, zip.longitude, sg_stores.* FROM zip JOIN store_finder AS sg_stores ON sg_stores.zip=zip.zipcode WHERE zip.latitude<=$lat_limit_max AND zip.latitude>=$lat_limit_min AND zip.longitude<=$lon_limit_max AND zip.longitude>=$lon_limit_min"; } private void getCords(double point_1_latitude, double point_1_longitude, double distance, int degs) { double m_EquatorialRadiusInMeters = 6366564.86; double m_Flattening=0; double distance_in_meters = distance * 1609.344 ; double direction_in_radians = Math.toRadians( degs ); double eps = 0.000000000000005; double r = 1.0 - m_Flattening; double point_1_latitude_in_radians = Math.toRadians( point_1_latitude ); double point_1_longitude_in_radians = Math.toRadians( point_1_longitude ); double tangent_u = (r * Math.sin( point_1_latitude_in_radians ) ) / Math.cos( point_1_latitude_in_radians ); double sine_of_direction = Math.sin( direction_in_radians ); double cosine_of_direction = Math.cos( direction_in_radians ); double heading_from_point_2_to_point_1_in_radians = 0.0; if ( cosine_of_direction != 0.0 ) { heading_from_point_2_to_point_1_in_radians = atan2( tangent_u, cosine_of_direction ) * 2.0; } double cu = 1.0 / Math.sqrt( ( tangent_u * tangent_u ) + 1.0 ); double su = tangent_u * cu; double sa = cu * sine_of_direction; double c2a = ( (-sa) * sa ) + 1.0; double x= Math.sqrt( ( ( ( 1.0 /r /r ) - 1.0 ) * c2a ) + 1.0 ) + 1.0; x= (x- 2.0 ) / x; double c= 1.0 - x; c= ( ( (x * x) / 4.0 ) + 1.0 ) / c; double d= ( ( 0.375 * (x * x) ) -1.0 ) * x; tangent_u = distance_in_meters /r / m_EquatorialRadiusInMeters /c; double y= tangent_u; boolean exit_loop = false; double cosine_of_y = 0.0; double cz = 0.0; double e = 0.0; double term_1 = 0.0; double term_2 = 0.0; double term_3 = 0.0; double sine_of_y = 0.0; while( exit_loop != true ) { sine_of_y = Math.sin(y); cosine_of_y = Math.cos(y); cz = Math.cos( heading_from_point_2_to_point_1_in_radians + y); e = (cz * cz * 2.0 ) - 1.0; c = y; x = e * cosine_of_y; y = (e + e) - 1.0; term_1 = ( sine_of_y * sine_of_y * 4.0 ) - 3.0; term_2 = ( ( term_1 * y * cz * d) / 6.0 ) + x; term_3 = ( ( term_2 * d) / 4.0 ) -cz; y= ( term_3 * sine_of_y * d) + tangent_u; if ( Math.abs(y - c) > eps ) { exit_loop = false; } else { exit_loop = true; } } heading_from_point_2_to_point_1_in_radians = ( cu * cosine_of_y * cosine_of_direction ) - ( su * sine_of_y ); c = r * Math.sqrt( ( sa * sa ) + ( heading_from_point_2_to_point_1_in_radians * heading_from_point_2_to_point_1_in_radians ) ); d = ( su * cosine_of_y ) + ( cu * sine_of_y * cosine_of_direction ); double point_2_latitude_in_radians = atan2(d, c); c = ( cu * cosine_of_y ) - ( su * sine_of_y * cosine_of_direction ); x = atan2( sine_of_y * sine_of_direction, c); c = ( ( ( ( ( -3.0 * c2a ) + 4.0 ) * m_Flattening ) + 4.0 ) * c2a * m_Flattening ) / 16.0; d = ( ( ( (e * cosine_of_y * c) + cz ) * sine_of_y * c) + y) * sa; double point_2_longitude_in_radians = ( point_1_longitude_in_radians + x) - ( ( 1.0 - c) * d * m_Flattening ); heading_from_point_2_to_point_1_in_radians = atan2( sa, heading_from_point_2_to_point_1_in_radians ) + Math.PI; latitude_in_degrees = Math.toRadians( point_2_latitude_in_radians ); longitude_in_degrees = Math.toRadians( point_2_longitude_in_radians ); } public double atan2(double y, double x) { double coeff_1 = Math.PI / 4d; double coeff_2 = 3d * coeff_1; double abs_y = Math.abs(y)+ 1e-10f; double r, angle; if (x >= 0d) { r = (x - abs_y) / (x + abs_y); angle = coeff_1; } else { r = (x + abs_y) / (abs_y - x); angle = coeff_2; } angle += (0.1963f * r * r - 0.9817f) * r; return y < 0.0f ? -angle : angle; } private Vector fetchVenues(double max_lat, double min_lat, double max_lon, double min_lon) { return new Vector(); } private class LocationListenerImpl implements LocationListener { public void locationUpdated(LocationProvider provider, Location location) { if(location.isValid()) { nearBy.this.longitude = location.getQualifiedCoordinates().getLongitude(); nearBy.this.latitude = location.getQualifiedCoordinates().getLatitude(); //double altitude = location.getQualifiedCoordinates().getAltitude(); //float speed = location.getSpeed(); } } public void providerStateChanged(LocationProvider provider, int newState) { // MUST implement this. Should probably do something useful with it as well. } } } please excuse the mess. I have the user lat long hard coded since I do not have GPS functional yet. You can see the SQL query commented out to know how I plan on using the min and max lat and long values. Any help is appreciated. Thanks

    Read the article

  • Secure wipe of a hard drive using WinPE.

    - by Derek Meier
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial.  There are tons of applications out there that will do it for you.  Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable.  Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)?  Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence.  But, we’re dealing with tinfoil hat wearing types here people.  DOD standards dictate at least 3 passes, and typically 7 is the preferred amount.  I’m not going to argue about data recovery.  I have been told to use 7 passes, and so I will.  So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data.  I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD.  Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc.  However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date.  I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx  It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you.  I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!!  My wife loves talking about WinPE almost as much as talking about Doctor Who.  Wait, did I say loves?  Hmmmm, I may have meant loathes. The topic at hand?  Right. Wiping a drive! I must have drunk too much coffee this morning.  I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat:   @echo off echo. echo     I will completely wipe the local hard drives using echo     7 individual wipes. The data will NOT echo     be recoverable.  I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment.  The clean command will overwrite the master boot record and any hidden sector information – so be careful!   sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001   With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible!  I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

    Read the article

  • Android Actionbar Tabs + Fragments + Service

    - by Vladimir
    So, I have 3 problems with my code: 1) I want that each tab saves its state. So that a TextView shows changed text if it was changed. 2) if I go to Tab2 then to Tab1 I can't see the content of the fragments. Only if I touch on the already selected tab, it shows me the content 3) I can't correctly connect/bind and unbind service to Fragment Text must be changed from Service. Please help, I don't know how I realize my intent. MyActivity.java package com.example.tabs; import android.app.ActionBar; import android.app.ActionBar.Tab; import android.app.Activity; import android.app.ActivityManager; import android.app.ActivityManager.RunningServiceInfo; import android.app.Fragment; import android.app.FragmentTransaction; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.content.SharedPreferences; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; public class MyActivity extends Activity { private static String ACTION_BAR_INDEX = "ACTION_BAR_INDEX"; private Tab tTab1; private Tab tTab2; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private TabListener<Tab1> tab1Listener; private TabListener<Tab2> tab2Listener; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { } } } }; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); myServiceIntent = new Intent(this, MyService.class); bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); if (!isServiceRunning()) { startService(myServiceIntent); } final ActionBar actionBar = getActionBar(); actionBar.setNavigationMode(ActionBar.NAVIGATION_MODE_TABS); actionBar.setDisplayShowTitleEnabled(false); tTab1 = actionBar.newTab(); tab1Listener = new TabListener<Tab1>(this, R.id.fl_main, Tab1.class); tTab1.setTag("Tab_1"); tTab1.setText("Tab_1"); tTab1.setTabListener(tab1Listener); tTab2 = actionBar.newTab(); tab2Listener = new TabListener<Tab2>(this, R.id.fl_main, Tab2.class); tTab2.setTag("Tab_2"); tTab2.setText("Tab_2"); tTab2.setTabListener(tab2Listener); actionBar.addTab(tTab1, 0); actionBar.addTab(tTab2, 1); } @Override public void onResume() { super.onResume(); SharedPreferences sp = getPreferences(Activity.MODE_PRIVATE); int actionBarIndex = sp.getInt(ACTION_BAR_INDEX, 0); getActionBar().setSelectedNavigationItem(actionBarIndex); } protected void onSaveInstanceState(Bundle outState) { // Save the current Action Bar tab selection int actionBarIndex = getActionBar().getSelectedTab().getPosition(); SharedPreferences.Editor editor = getPreferences(Activity.MODE_PRIVATE).edit(); editor.putInt(ACTION_BAR_INDEX, actionBarIndex); editor.apply(); // Detach each of the Fragments FragmentTransaction ft = getFragmentManager().beginTransaction(); if (tab2Listener.fragment != null) { ft.detach(tab2Listener.fragment); } if (tab1Listener.fragment != null) { ft.detach(tab1Listener.fragment); } ft.commit(); super.onSaveInstanceState(outState); } protected void onRestoreInstanceState(Bundle savedInstanceState) { // Find the recreated Fragments and assign them to their associated Tab // Listeners. tab1Listener.fragment = getFragmentManager().findFragmentByTag(Tab1.class.getName()); tab2Listener.fragment = getFragmentManager().findFragmentByTag(Tab2.class.getName()); // Restore the previous Action Bar tab selection. SharedPreferences sp = getPreferences(Activity.MODE_PRIVATE); int actionBarIndex = sp.getInt(ACTION_BAR_INDEX, 0); getActionBar().setSelectedNavigationItem(actionBarIndex); super.onRestoreInstanceState(savedInstanceState); } public boolean isServiceRunning() { ActivityManager manager = (ActivityManager) getSystemService(Context.ACTIVITY_SERVICE); for (RunningServiceInfo service : manager.getRunningServices(Integer.MAX_VALUE)) { if (MyService.class.getName().equals(service.service.getClassName())) { return true; } } return false; } @Override protected void onDestroy() { super.onDestroy(); unbindService(myConnection); stopService(myServiceIntent); } public static class TabListener<T extends Fragment> implements ActionBar.TabListener { private Fragment fragment; private Activity activity; private Class<T> fragmentClass; private int fragmentContainer; public TabListener(Activity activity, int fragmentContainer, Class<T> fragmentClass) { this.activity = activity; this.fragmentContainer = fragmentContainer; this.fragmentClass = fragmentClass; } public void onTabReselected(Tab tab, FragmentTransaction ft) { if (fragment != null) { ft.attach(fragment); } } public void onTabSelected(Tab tab, FragmentTransaction ft) { if (fragment == null) { String fragmentName = fragmentClass.getName(); fragment = Fragment.instantiate(activity, fragmentName); ft.add(fragmentContainer, fragment, fragmentName); } else { ft.detach(fragment); } } public void onTabUnselected(Tab tab, FragmentTransaction ft) { if (fragment != null) { ft.detach(fragment); } } } } MyService.java package com.example.tabs; import android.app.Service; import android.content.Intent; import android.os.Binder; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; public class MyService extends Service { private final IBinder myBinder = new MyBinder(); private static Handler myServiceHandler; public IBinder onBind(Intent intent) { return myBinder; } public int onStartCommand(Intent intent, int flags, int startId) { super.onStartCommand(intent, flags, startId); return START_STICKY; } public void sendMessage(String sText, int id) { Bundle bundle = new Bundle(); bundle.putString("Text" + id, sText); Message bundleMessage = new Message(); bundleMessage.setData(bundle); myServiceHandler.sendMessage(bundleMessage); } public class MyBinder extends Binder { public MyService getService() { return MyService.this; } public void setCallbackHandler(Handler myActivityHandler) { myServiceHandler = myActivityHandler; } public void removeCallbackHandler() { myServiceHandler = null; } } } Tab1.java package com.example.tabs; import android.app.Activity; import android.app.Fragment; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnClickListener; import android.view.ViewGroup; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class Tab1 extends Fragment { public static String TAG = Tab1.class.getClass().getSimpleName(); private static TextView tvText; private EditText editText; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { tvText.setText(text); } } } }; public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { View view = inflater.inflate(R.layout.tab1, container, false); tvText = (TextView) view.findViewById(R.id.tv_tab1); editText = (EditText) view.findViewById(R.id.editText1); Button btn1 = (Button) view.findViewById(R.id.btn_change_text_1); btn1.setOnClickListener(new OnClickListener() { public void onClick(View v) { myService.sendMessage(String.valueOf(editText.getText()), 1); } }); return view; } @Override public void onAttach(Activity activity) { super.onAttach(activity); myServiceIntent = new Intent(activity, MyService.class); activity.bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); } @Override public void onDetach() { super.onDetach(); getActivity().unbindService(myConnection); } } Tab2.java package com.example.tabs; import android.app.Activity; import android.app.Fragment; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; import android.util.Log; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnClickListener; import android.view.ViewGroup; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class Tab2 extends Fragment { public static String TAG = Tab2.class.getClass().getSimpleName(); private static TextView tvText; private EditText editText; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { tvText.setText(text); } } } }; public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { View view = inflater.inflate(R.layout.tab2, container, false); tvText = (TextView) view.findViewById(R.id.tv_tab2); editText = (EditText) view.findViewById(R.id.editText2); Button btn2 = (Button) view.findViewById(R.id.btn_change_text_2); btn2.setOnClickListener(new OnClickListener() { public void onClick(View v) { myService.sendMessage(String.valueOf(editText.getText()), 2); } }); return view; } @Override public void onAttach(Activity activity) { super.onAttach(activity); myServiceIntent = new Intent(activity, MyService.class); activity.bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); } @Override public void onDetach() { super.onDetach(); getActivity().unbindService(myConnection); } } main.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:id="@+id/main" android:layout_width="match_parent" android:layout_height="match_parent" android:background="@android:color/black" android:orientation="vertical" > </LinearLayout> tab1.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:layout_gravity="center" android:gravity="center" android:orientation="vertical" > <EditText android:id="@+id/editText1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:ems="10" android:inputType="text" > <requestFocus /> </EditText> <Button android:id="@+id/btn_change_text_1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="Change text" /> <TextView android:id="@+id/tv_tab1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="TAB1\nTAB1\nTAB1" /> </LinearLayout> tab2.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:layout_gravity="center" android:gravity="center" android:orientation="vertical" > <EditText android:id="@+id/editText2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:ems="10" android:inputType="text" > <requestFocus /> </EditText> <Button android:id="@+id/btn_change_text_2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="Change text" /> <TextView android:id="@+id/tv_tab2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="TAB2\nTAB2\nTAB2" /> </LinearLayout> AndroidManifest.xml <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.tabs" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="15" android:targetSdkVersion="17" /> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="TabsPlusService" android:theme="@android:style/Theme.Holo" > <activity android:name="com.example.tabs.MyActivity" android:configChanges="orientation|keyboardHidden|screenSize" android:label="TabsPlusService" android:theme="@android:style/Theme.Holo" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <service android:name=".MyService" android:enabled="true" > </service> </application> </manifest>

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

  • Ada and 'The Book'

    - by Phil Factor
    The long friendship between Charles Babbage and Ada Lovelace created one of the most exciting and mysterious of collaborations ever to have resulted in a technological breakthrough. The fireworks that created by the collision of two prodigious mathematical and creative talents resulted in an invention, the Analytical Engine, which went on to change society fundamentally. However, beyond that, we just don't know what the bulk of their collaborative work was about:;  it was done in strictest secrecy. Even the known outcome of their friendship, the first programmable computer, was shrouded in mystery. At the time, nobody, except close friends and family, had any idea of Ada Byron's contribution to the invention of the ‘Engine’, and how to program it. Her great insight was published in August 1843, under the initials AAL, standing for Ada Augusta Lovelace, her title then being the Countess of Lovelace. It was contained in a lengthy ‘note’ to her translation of a publication that remains the best description of Babbage's amazing Analytical Engine. The secret identity of the person behind those enigmatic initials was finally revealed by Prince de Polignac who, seventy years later, wrote to Ada's daughter to seek confirmation that her mother had, indeed, been the author of the brilliant sentences that described so accurately how Babbage's mechanical computer could be programmed with punch-cards. L.F. Menabrea's paper on the Analytical Engine first appeared in the 'Bibliotheque Universelle de Geneve' in October 1842, and Ada translated it anonymously for Taylor's 'Scientific Memoirs'. Charles Babbage was surprised that she had not written an original paper as she already knew a surprising amount about the way the machine worked. He persuaded her to at least write some explanatory notes. These notes ended up extending to four times the length of the original article and represented the first published account of how a machine could be programmed to perform any calculation. Her example of programming the Bernoulli sequence would have worked on the Analytical engine had the device’s construction been completed, and gave Ada an unassailable claim to have invented the art of programming. What was the reason for Ada's secrecy? She was the only legitimate child of Lord Byron, who was probably the best known celebrity of the age, so she was already famous. She was a senior aristocrat, with titles, a fortune in money and vast estates in the Midlands. She had political influence, and was the cousin of Lord Melbourne, who was the Prime Minister at that time. She was friendly with the young Queen Victoria. Her mathematical activities were a pastime, and not one that would be considered by others to be in keeping with her roles and responsibilities. You wouldn't dare to dream up a fictional heroine like Ada. She was dazzlingly beautiful and talented. She could speak several languages fluently, and play some musical instruments with professional skill. Contemporary accounts refer to her being 'accomplished in science, art and literature'. On top of that, she was a brilliant mathematician, a talent inherited from her mother, Annabella Milbanke. In her mother's circle of literary and scientific friends was Charles Babbage, and Ada's friendship with him dates from her teenage zest for Mathematics. She was one of the first people he'd ever met who understood what he had attempted to achieve with the 'Difference Engine', and with whom he could converse as intellectual equals. He arranged for her to have an education from the most talented academics in the country. Ada melted the heart of the cantankerous genius to the point that he became a faithful and loyal father-figure to her. She was one of the very few who could grasp the principles of the later, and very different, ‘Analytical Engine’ which was designed from the start to tackle a variety of tasks. Sadly, Ada Byron's life ended less than a decade after completing the work that assured her long-term fame, in November 1852. She was dying of cancer, her gambling habits had caused her to run up huge debts, she'd had more than one affairs, and she was being blackmailed. Her brilliant but unempathic mother was nursing her in her final illness, destroying her personal letters and records, and repaying her debts. Her husband was distraught but helpless. Charles Babbage, however, maintained his steadfast paternalistic friendship to the end. She appointed her loyal friend to be her executor. For years, she and Babbage had been working together on a secret project, known only as 'The Book'. We have a clue to what it was in a letter written by her nine years earlier, on 11th August 1843. It was a joint project by herself and Lord Lovelace, her husband, and was intended to involve Babbage's 'undivided energies'. It involved 'consulting your Engine' (it required Babbage’s computer). The letter gives no hint about the project except for the high-minded nature of its purpose, and its highly mathematical nature.  From then on, the surviving correspondence between the two gives only veiled references to 'The Book'. There isn't much, since Babbage later destroyed any letters that could have damaged her reputation within the Establishment. 'I cannot spare the book today, which I am very sorry for. At the moment I want it for constant reference, but I think you can have it tomorrow' (Oct 1844)  And 'I will send you the book directly, and you can say, when you receive it, how long you will want to keep it'. (Nov 1844)  The two of them were obviously intent on the work: She writes, four years later, 'I have an engagement for Wednesday which will prevent me from attending to your wishes about the book' (Dec 1848). This was something that they both needed to work on, but could not do in parallel: 'I will send the book on Tuesday, and it can be left with you till Friday' (11 Feb 1849). After six years work, it had been so well-handled that it was beginning to fall apart: 'Don't forget the new cover you promised for the book. The poor book is very shabby and wants one' (20 Sept 1849). So what was going on? The word 'book' was not a code-word: it was a real book, probably a 'printer's blank', plain paper, but properly bound so printers and publishers could show off how the published work might look. The hints from the correspondence are of advanced mathematics. It is obvious that the book was travelling between them, back and forth, each one working on it for less than a week before passing it back. Ada and her husband were certainly involved in gambling large sums of money on the horses, and so most biographers have concluded that the three of them were trying to calculate the mathematical odds on the horses. This theory has three large problems. Firstly, Ada's original letter proposing the project refers to its high-minded nature. Babbage was temperamentally opposed to gambling and would scarcely have given so much time to the project, even though he was devoted to Ada. Secondly, Babbage would have very soon have realized the hopelessness of trying to beat the bookies. This sort of betting never attracts his type of intellectual background. The third problem is that any work on calculating the odds on horses would not need a well-thumbed book to pass back and forth between them; they would have not had to work in series. The original project was instigated by Ada, along with her husband, William King-Noel, 1st Earl of Lovelace. Charles Babbage was invited to join the project after the couple had come up with the idea. What could William have contributed? One might assume that William was a Bertie Wooster character, addicted only to the joys of the turf, but this was far from the truth. He was a scientist, a Cambridge graduate who was later elected to be a Fellow of the Royal Society. After Eton, he went to Trinity College, Cambridge. On graduation, he entered the diplomatic service and acted as secretary under Lord Nugent, who was Lord Commissioner of the Ionian Islands. William was very friendly with Babbage too, able to discuss scientific matters on equal terms. He was a capable engineer who invented a process for bending large timbers by the application of steam heat. He delivered a paper to the Institution of Civil Engineers in 1849, and received praise from the great engineer, Isambard Kingdom Brunel. As well as being Lord Lieutenant of the County of Surrey for most of Victoria's reign, he had time for a string of scientific and engineering achievements. Whatever the project was, it is unlikely that William was a junior partner. After Ada's death, the project disappeared. Then, two years later, Babbage, through one of his occasional outbursts of temper, demonstrated that he was able to decrypt one of the most powerful of secret codes, Vigenère's autokey cipher.  All contemporary diplomatic and military messages used a variant of this cipher. Babbage had made three important discoveries, namely, the mathematical law of this cipher, the principle of the key periodicity, and the technique of the symmetry of position. The technique is now known as the Kasiski examination, also called the Kasiski test, but Babbage got there first. At one time, he listed amongst his future projects, the writing of a book 'The Philosophy of Decyphering', but it never came to anything. This discovery was going to change the course of history, since it was used to decipher the Russians’ military dispatches in the Crimean war. Babbage himself played a role during the Crimean War as a cryptographical adviser to his friend, Rear-Admiral Sir Francis Beaufort of the Admiralty. This is as much as we can be certain about in trying to make sense of the bulk of the time that Charles Babbage and Ada Lovelace worked together. Nine years of intensive work, involving the 'Engine' and a great deal of mathematics and research seems to have been lost: or has it? I've argued in the past http://www.simple-talk.com/community/blogs/philfactor/archive/2008/06/13/59614.aspx that the cracking of the Vigenère autokey cipher, was a fundamental motive behind the British Government's support and funding of the 'Difference Engine'. The Duke of Wellington, whose understanding of the military significance of being able to read enemy dispatches, was the most steadfast advocate of the project. If the three friends were actually doing the work of cracking codes by mathematical techniques that used the techniques of key periodicity, and symmetry of position (the use of a book being passed quickly to and fro is very suggestive), intending to then use the 'Engine' to do the routine cracking of each dispatch, then this is a rather different story. The project was Ada and William's idea. (William had served in the diplomatic service and would be familiar with the use of codes). This makes Ada Lovelace the initiator of a project which, by giving both Britain, and probably the USA, a diplomatic and military advantage in the second part of the Nineteenth century, changed world history. Ada would never have wanted any credit for cracking the cipher, and developing the method that rendered all contemporary military and diplomatic ciphering techniques nugatory; quite the reverse. And it is clear from the gaps in the record of the letters between the collaborators that the evidence was destroyed, probably on her request by her irascible but intensely honorable executor, Charles Babbage. Charles Babbage toyed with the idea of going public, but the Crimean war put an end to that. The British Government had a valuable secret, and intended to keep it that way. Ada and Charles had quite often discussed possible moneymaking projects that would fund the development of the Analytic Engine, the first programmable computer, but their secret work was never in the running as a potential cash cow. I suspect that the British Government was, even then, working on the concealment of a discovery whose value to the nation depended on it remaining so. The success of code-breaking in the Crimean war, and the American Civil war, led to the British and Americans  subsequently giving much more weight and funding to the science of decryption. Paradoxically, this makes Ada's contribution even closer to the creation of Colossus, the first digital computer, at Bletchley Park, specifically to crack the Nazi’s secret codes.

    Read the article

  • Java JPanel not showing up....

    - by user69514
    I'm not sure what I am doing wrong, but the text for my JPanels is not showing up. I just get the question number text, but the question is not showing up. Any ideas what I am doing wrong? import java.awt.*; import java.awt.event.*; import javax.swing.*; import javax.swing.event.*; class NewFrame extends JFrame { JPanel centerpanel; // For the questions. CardLayout card; // For the centerpanel. JTextField tf; // Used in question 1. boolean // Store selections for Q2. q2Option1, q2Option2, q2Option3, q2Option4; JList q4List; // For question 4. double // Score on each question. q1Score = 0, q2Score = 0, q3Score = 0, q4Score = 0; // Constructor. public NewFrame (int width, int height) { this.setTitle ("Snoot Club Membership Test"); this.setResizable (true); this.setSize (width, height); Container cPane = this.getContentPane(); // cPane.setLayout (new BorderLayout()); // First, a welcome message, as a Label. JLabel L = new JLabel ("<html><b>Are you elitist enough for our exclusive club?" + " <br>Fill out the form and find out</b></html>"); L.setForeground (Color.blue); cPane.add (L, BorderLayout.NORTH); // Now the center panel with the questions. card = new CardLayout (); centerpanel = new JPanel (); centerpanel.setLayout (card); centerpanel.setOpaque (false); // Each question will be created in a separate method. // The cardlayout requires a label as second parameter. centerpanel.add (firstQuestion (), "1"); centerpanel.add (secondQuestion(), "2"); centerpanel.add (thirdQuestion(), "3"); centerpanel.add (fourthQuestion(), "4"); cPane.add (centerpanel, BorderLayout.CENTER); // Next, a panel of four buttons at the bottom. // The four buttons: quit, submit, next-question, previous-question. JPanel bottomPanel = getBottomPanel (); cPane.add (bottomPanel, BorderLayout.SOUTH); // Finally, show the frame. this.setVisible (true); } // No-parameter constructor. public NewFrame () { this (500, 300); } // The first question uses labels for the question and // gets input via a textfield. A panel containing all // these things is returned. The question asks for // a vacation destination: the more exotic the location, // the higher the score. JPanel firstQuestion () { // We will package everything into a panel and return the panel. JPanel subpanel = new JPanel (); // We will place things in a single column, so // a GridLayout with one column is appropriate. subpanel.setLayout (new GridLayout (8,1)); JLabel L1 = new JLabel ("Question 1:"); L1.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L1); JLabel L2 = new JLabel (" Select a vacation destination"); L2.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L2); JLabel L3 = new JLabel (" 1. Baltimore"); L3.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L3); JLabel L4 = new JLabel (" 2. Disneyland"); L4.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L4); JLabel L5 = new JLabel (" 3. Grand Canyon"); L5.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L5); JLabel L6 = new JLabel (" 4. French Riviera"); L6.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L6); JLabel L7 = new JLabel ("Enter 1,2,3 or 4 below:"); L7.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L7); // Here's the textfield to get user-input. tf = new JTextField (); tf.addActionListener ( new ActionListener () { // This interface has only one method. public void actionPerformed (ActionEvent a) { String q1String = a.getActionCommand(); if (q1String.equals ("2")) q1Score = 2; else if (q1String.equals ("3")) q1Score = 3; else if (q1String.equals ("4")) q1Score = 4; else q1Score = 1; } } ); subpanel.add (tf); return subpanel; } // For the second question, a collection of checkboxes // will be used. More than one selection can be made. // A listener is required for each checkbox. The state // of each checkbox is recorded. JPanel secondQuestion () { JPanel subpanel = new JPanel (); subpanel.setLayout (new GridLayout (7,1)); JLabel L1 = new JLabel ("Question 2:"); L1.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L1); JLabel L2 = new JLabel (" Select ONE OR MORE things that "); L2.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L2); JLabel L3 = new JLabel (" you put into your lunch sandwich"); L3.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L3); // Initialize the selections to false. q2Option1 = q2Option2 = q2Option3 = q2Option4 = false; // First checkbox. JCheckBox c1 = new JCheckBox ("Ham, beef or turkey"); c1.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JCheckBox c = (JCheckBox) i.getSource(); q2Option1 = c.isSelected(); } } ); subpanel.add (c1); // Second checkbox. JCheckBox c2 = new JCheckBox ("Cheese"); c2.addItemListener ( new ItemListener () { // This is where we will react to a change in checkbox. public void itemStateChanged (ItemEvent i) { JCheckBox c = (JCheckBox) i.getSource(); q2Option2 = c.isSelected(); } } ); subpanel.add (c2); // Third checkbox. JCheckBox c3 = new JCheckBox ("Sun-dried Arugula leaves"); c3.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JCheckBox c = (JCheckBox) i.getSource(); q2Option3 = c.isSelected(); } } ); subpanel.add (c3); // Fourth checkbox. JCheckBox c4 = new JCheckBox ("Lemon-enhanced smoked Siberian caviar"); c4.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JCheckBox c = (JCheckBox) i.getSource(); q2Option4 = c.isSelected(); } } ); subpanel.add (c4); return subpanel; } // The third question allows only one among four choices // to be selected. We will use radio buttons. JPanel thirdQuestion () { JPanel subpanel = new JPanel (); subpanel.setLayout (new GridLayout (6,1)); JLabel L1 = new JLabel ("Question 3:"); L1.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L1); JLabel L2 = new JLabel (" And which mustard do you use?"); L2.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L2); // First, create the ButtonGroup instance. // We will add radio buttons to this group. ButtonGroup bGroup = new ButtonGroup(); // First checkbox. JRadioButton r1 = new JRadioButton ("Who cares?"); r1.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JRadioButton r = (JRadioButton) i.getSource(); if (r.isSelected()) q3Score = 1; } } ); bGroup.add (r1); subpanel.add (r1); // Second checkbox. JRadioButton r2 = new JRadioButton ("Safeway Brand"); r2.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JRadioButton r = (JRadioButton) i.getSource(); if (r.isSelected()) q3Score = 2; } } ); bGroup.add (r2); subpanel.add (r2); // Third checkbox. JRadioButton r3 = new JRadioButton ("Fleishman's"); r3.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JRadioButton r = (JRadioButton) i.getSource(); if (r.isSelected()) q3Score = 3; } } ); bGroup.add (r3); subpanel.add (r3); // Fourth checkbox. JRadioButton r4 = new JRadioButton ("Grey Poupon"); r4.addItemListener ( new ItemListener () { public void itemStateChanged (ItemEvent i) { JRadioButton r = (JRadioButton) i.getSource(); if (r.isSelected()) q3Score = 4; } } ); bGroup.add (r4); subpanel.add (r4); return subpanel; } // For the fourth question we will use a drop-down Choice. JPanel fourthQuestion () { JPanel subpanel = new JPanel (); subpanel.setLayout (new GridLayout (3,1)); JLabel L1 = new JLabel ("Question 4:"); L1.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L1); JLabel L2 = new JLabel (" Your movie preference, among these:"); L2.setFont (new Font ("SansSerif", Font.ITALIC, 15)); subpanel.add (L2); // Create a JList with options. String[] movies = { "Lethal Weapon IV", "Titanic", "Saving Private Ryan", "Le Art Movie avec subtitles"}; q4List = new JList (movies); q4Score = 1; q4List.addListSelectionListener ( new ListSelectionListener () { public void valueChanged (ListSelectionEvent e) { q4Score = 1 + q4List.getSelectedIndex(); } } ); subpanel.add (q4List); return subpanel; } void computeResult () { // Clear the center panel. centerpanel.removeAll(); // Create a new panel to display in the center. JPanel subpanel = new JPanel (new GridLayout (5,1)); // Score on question 1. JLabel L1 = new JLabel ("Score on question 1: " + q1Score); L1.setFont (new Font ("Serif", Font.ITALIC, 15)); subpanel.add (L1); // Score on question 2. if (q2Option1) q2Score += 1; if (q2Option2) q2Score += 2; if (q2Option3) q2Score += 3; if (q2Option4) q2Score += 4; q2Score = 0.6 * q2Score; JLabel L2 = new JLabel ("Score on question 2: " + q2Score); L2.setFont (new Font ("Serif", Font.ITALIC, 15)); subpanel.add (L2); // Score on question 3. JLabel L3 = new JLabel ("Score on question 3: " + q3Score); L3.setFont (new Font ("Serif", Font.ITALIC, 15)); subpanel.add (L3); // Score on question 4. JLabel L4 = new JLabel ("Score on question 4: " + q4Score); L4.setFont (new Font ("Serif", Font.ITALIC, 15)); subpanel.add (L4); // Weighted score. double avg = (q1Score + q2Score + q3Score + q4Score) / (double) 4; JLabel L5; if (avg <= 3.5) L5 = new JLabel ("Your average score: " + avg + " - REJECTED!"); else L5 = new JLabel ("Your average score: " + avg + " - WELCOME!"); L5.setFont (new Font ("Serif", Font.BOLD, 20)); //L5.setAlignment (JLabel.CENTER); subpanel.add (L5); // Now add the new subpanel. centerpanel.add (subpanel, "5"); // Need to mark the centerpanel as "altered" centerpanel.invalidate(); // Everything "invalid" (e.g., the centerpanel above) // is now re-computed. this.validate(); } JPanel getBottomPanel () { // Create a panel into which we will place buttons. JPanel bottomPanel = new JPanel (); // A "previous-question" button. JButton backward = new JButton ("Previous question"); backward.setFont (new Font ("Serif", Font.PLAIN | Font.BOLD, 15)); backward.addActionListener ( new ActionListener () { public void actionPerformed (ActionEvent a) { // Go back in the card layout. card.previous (centerpanel); } } ); bottomPanel.add (backward); // A forward button. JButton forward = new JButton ("Next question"); forward.setFont (new Font ("Serif", Font.PLAIN | Font.BOLD, 15)); forward.addActionListener ( new ActionListener () { public void actionPerformed (ActionEvent a) { // Go forward in the card layout. card.next (centerpanel); } } ); bottomPanel.add (forward); // A submit button. JButton submit = new JButton ("Submit"); submit.setFont (new Font ("Serif", Font.PLAIN | Font.BOLD, 15)); submit.addActionListener ( new ActionListener () { public void actionPerformed (ActionEvent a) { // Perform submit task. computeResult(); } } ); bottomPanel.add (submit); JButton quitb = new JButton ("Quit"); quitb.setFont (new Font ("Serif", Font.PLAIN | Font.BOLD, 15)); quitb.addActionListener ( new ActionListener () { public void actionPerformed (ActionEvent a) { System.exit (0); } } ); bottomPanel.add (quitb); return bottomPanel; } } public class Survey { public static void main (String[] argv) { NewFrame nf = new NewFrame (600, 300); } }

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >