Search Results

Search found 10651 results on 427 pages for 'modem manager'.

Page 247/427 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • How can I get DVDs playing after a Vista to XP change?

    - by Liath
    I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

    Read the article

  • How to override a related sets "add" method?

    - by MB_
    I am working on a django project and i want to send a signal when something get's added to some models related set, e.g. we have an owner wo has a set of collectables and each time the method owner.collectable_set.add(something) is getting called i want signal like "collectable_added" or something. signals are clear to me, but in which manager(?) the "add" method sits that i want to override is unclear to me.

    Read the article

  • extra managed+unmanaged switches @ home/office -- best (mis)usage scenario? what would you do?

    - by locuse
    up front -- definitely NOT a mission-critical kind of question. after a 'spring cleaning' of my local office, i've ended up with two 'spare' GigE switches at my home/office -- one managed, capable of VLANs, QoS, etc, and the other unmanaged. i've got more ports than i need. in fact EACH switch has more total ports than i need. but, since i can't have these just sitting around not doing SOMETHING ... ;-) i'm interested in ideas for best combined use of these switches. my local topology is simple: [ net ] -- [ adsl2 modem ] -- [linux firewall/router/DNS ] _______________| | [ some arrangement of the 2 GigE switches ] | ( ... stuff on the lan ... ) [WAP1] [voip ATA] [printer] [desktop1] [mail server] [Xen server [desktop2] ( mostly dev, [desktop3] + file server [desktop4] + media server)] the MailServer is a production mail server the XenServer serves some low vol to the 'net; the MediaServer guest serves ONLY to the LAN is there, e.g., any performance value in segmenting off any of the LAN using the managed switch (VLAN? QoS tagging? something?), feeding the rest into the connected unmanaged switch? or should i simply use one of the switches & be done with it, and use the other for a coffee-cup stand?

    Read the article

  • Hard Reset USB in Ubuntu 10.04

    - by Cory
    I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

    Read the article

  • Resizing gif images

    - by Danny
    I have a gif image 720 * 40 pixels used as a footer on a website. I need to extend the height of the gif by 10 pixels. I was unable to resize to this, using Office Picture Manager. What is the best way to achieve this?

    Read the article

  • @Transactional in Spring+Hibernate

    - by Arun Kumar
    I an using Spring 3.1 + Hibernate 4.x in my web application. In my DAO, i am saving User type object as following sessionFactory.getCurrentSession().save(user); But getting following exception: org.hibernate.HibernateException: save is not valid without active transaction I googled and found similar question on SO, with following solution: Session session=getSessionFactory().getCurrentSession(); Transaction trans=session.beginTransaction(); session.save(entity); trans.commit(); That solves the problem. But in that solution, there is lot of mess of beginning and committing the transactions manually. Can't i use sessionFactory.getCurrentSession().save(user); directly without begin/commit of transactions manually? I try to use @Transactional on my service/dao methods too, but the problem persists. EDIT : Here is my Hibernate Config File: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:aop="http://www.springframework.org/schema/aop" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.1.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-3.1.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-3.1.xsd"> <!-- enable the configuration of transactional behavior based on annotations --> <tx:annotation-driven transaction-manager="txManager"/> <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource" p:driverClassName="${db.driverClassName}" p:url="${db.url}" p:username="${db.username}" p:password="${db.password}" /> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.annotation.AnnotationSessionFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="packagesToScan" value="com.myapp.entities" /> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.MySQLDialect</prop> <prop key="hibernate.show_sql">true</prop> </props> </property> </bean> <!--Transaction Manager Added --> <bean id="txManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory"> <ref bean="sessionFactory" /> </property> </bean> </beans> Please help.

    Read the article

  • Hard Reset USB in Ubuntu 10.04

    - by Cory
    I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

    Read the article

  • Router as primary DNS server, Server as alternate? (or vice versa)

    - by Jakobud
    We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

    Read the article

  • FTP zip upload and unpack

    - by DR.GEWA
    Hi Alsways uploading made web-sites , projects, I want to make such thing make zip file, upload one file and then extract with default CHMOD for folders lets say 755 and for files 664 With Cpanel hostings its OK, I can do it via file manager... But for hostings without I can't. Baybe someone can give a hint how...????

    Read the article

  • Can't Ping - Wireless network of home

    - by Naunidh
    Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

    Read the article

  • Tomcat memory issue

    - by user305210
    Hello, I have noticed that my application that is running on Tomcat 5 starts with 1gig of memory and as soon as it starts receiving requests from client, the memory starts dropping until it is down to 100MBs and troubles start from there. I am looking at /manager/status page of tomcat under JVM section where "Free Memory", "Total Memory", "Max Memory" is listed. Is this an indicator of memory leak? Memory does not seem to be freed-up automatically even if there are no requests coming from client machines.

    Read the article

  • Why still use JPG compression? [closed]

    - by Torben Gundtofte-Bruun
    Back when the JPG image format was introduced, it made a lot of sense to reduce the file size, even accepting a loss in image quality, because files were being downloaded over a slow and expensive modem connection. In today's world, file size is no longer a concern, at least not regarding JPG where it seems silly to save 45kB on a photo. But my image editing apps still prompt me for the desired compression level when I save a file. Does it still make sense to go with the default 85? Why should I not crank it up to 100 for all files? Update based on comments: For web work, I might use PNG instead. But every smartphone and camera produces JPG files. The question arises when I save these edits. Audience is my own harddisk. We're talking photos, 2-5MB apiece. Chroma, subsampling, DCT - sorry, never heard of it. I'm a home user, not Photoshop guru. For the record, I use Paint Shop Pro on Win, and Gimp on Linux.

    Read the article

  • Good basic tutorial for installing and using SqlServer

    - by ripper234
    I know mysql, and I'd like to learn sqlserver. I'm currently stuck on the basics of basics: How to install and configure sql server How to connect to it I installed Sql Server through Web Platform Installer, and have Visual Studio 2008 installed. Still, I can't understand how to connect to my server: I see that the SQL service itself (SQLEXPRESS) is running in both in services.msc and Sql Server Configuration Manager I try to connect to it via the Management Studio, but I don't understand what to do. Where do I begin?

    Read the article

  • Drupal: tags order in back-end edit-content pages

    - by Patrick
    hi, can I order alphabetically the tags in my edit content pages ? See screenshot here: http://dl.dropbox.com/u/72686/tagsOrder.png Currently the order is given by the Taxonomy Manager module (I installed in my Drupal). I would like to know if I should use jQuery to order the tags in my back-end pages. thanks

    Read the article

  • How to convince management to unblock stackoverflow.com?

    - by Abe Miessler
    The place I'm working at restricts a lot of sites (including SO). They have a company experts-exchange account that most of the people I work with are happy using. I told my manager that I prefer SO and asked him to unblock it but he just told me to use experts-exchange. Any suggestions on how to convince my corporate overlords that my time is better spent here?

    Read the article

  • Show or hide fields depending on the Acl9 role - Ruby on Rails

    - by Michaël
    Hi, I am using Acl9 to manage the roles and I want to hide the checkbox usertype if the user has the role :customer and show it if the role is :manager. I want that just the :manager can edit all the fields and some for the :customer. Thank you for your help! <h1>Editing user</h1> <% form_for(@user) do |f| %> <%= f.error_messages %> <p> <%= f.label :usertype %><br /> <%= f.check_box :usertype %> </p> <p> <%= f.label :surname %><br /> <%= f.text_field :surname %> </p> <p> <%= f.label :firstname %><br /> <%= f.text_field :firstname %> </p> <p> <%= f.label :phone %><br /> <%= f.text_field :phone %> </p> <p> <%= f.label :email %><br /> <%= f.text_field :email %> </p> <p> <%= f.label :registrationdate %><br /> <%= f.datetime_select :registrationdate %> </p> <p> <%= f.label :login %><br /> <%= f.text_field :login %> </p> <p> <%= f.label :password %><br /> <%= f.text_field :password %> </p> <p> <%= f.submit 'Update' %> </p> <% end %> <%= link_to 'Show', @user %> | <%= link_to 'Back', users_path %>

    Read the article

  • How to disallow a windows service stop

    - by Saar
    I have some security related service running on my machine (start type = automatic) In the service control manager, the stop/restart commands are grayed out. I was wondering how can I develop such service for which the stop operation is disallowed. Note that I am logged in as an administrator

    Read the article

  • Is it a good or bad practice to call instance methods from a java constructor?

    - by Steve
    There are several different ways I can initialize complex objects (with injected dependencies and required set-up of injected members), are all seem reasonable, but have various advantages and disadvantages. I'll give a concrete example: final class MyClass { private final Dependency dependency; @Inject public MyClass(Dependency dependency) { this.dependency = dependency; dependency.addHandler(new Handler() { @Override void handle(int foo) { MyClass.this.doSomething(foo); } }); doSomething(0); } private void doSomething(int foo) { dependency.doSomethingElse(foo+1); } } As you can see, the constructor does 3 things, including calling an instance method. I've been told that calling instance methods from a constructor is unsafe because it circumvents the compiler's checks for uninitialized members. I.e. I could have called doSomething(0) before setting this.dependency, which would have compiled but not worked. What is the best way to refactor this? Make doSomething static and pass in the dependency explicitly? In my actual case I have three instance methods and three member fields that all depend on one another, so this seems like a lot of extra boilerplate to make all three of these static. Move the addHandler and doSomething into an @Inject public void init() method. While use with Guice will be transparent, it requires any manual construction to be sure to call init() or else the object won't be fully-functional if someone forgets. Also, this exposes more of the API, both of which seem like bad ideas. Wrap a nested class to keep the dependency to make sure it behaves properly without exposing additional API:class DependencyManager { private final Dependency dependency; public DependecyManager(Dependency dependency) { ... } public doSomething(int foo) { ... } } @Inject public MyClass(Dependency dependency) { DependencyManager manager = new DependencyManager(dependency); manager.doSomething(0); } This pulls instance methods out of all constructors, but generates an extra layer of classes, and when I already had inner and anonymous classes (e.g. that handler) it can become confusing - when I tried this I was told to move the DependencyManager to a separate file, which is also distasteful because it's now multiple files to do a single thing. So what is the preferred way to deal with this sort of situation?

    Read the article

  • Directory service unavailiable, new hardware same settings

    - by Alex
    I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

    Read the article

  • How can i use a variable created in a objective c Void function?

    - by James
    Im trying to get the lat and long values generated in a void function and use them within another function. Any help grateful. (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation { float latDeg = newLocation.coordinate.latitude; NSLog(@"Lat: %g", latDeg); float longDeg = newLocation.coordinate.longitude; NSLog(@"Lat: %g", longDeg); } I want to use the latDeg and longDeg variables.

    Read the article

  • Security Resources Defining, Static/Dynamic

    - by mmontalvo
    I am implementing a simple(hopefully) security manager within an application. Is it better to have predefined(static) roles, custom roles(dynamic)? I am leaning more towards dynamic groups or roles only because then it would not require a redeploy to update the system. Also, what would be the best approach to define resources in general? The application has a database that can hold either the static or dynamic values.

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >