Search Results

Search found 38282 results on 1532 pages for 'ubuntu 12 04'.

Page 247/1532 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• apt-get update stuck on "Waiting for Headers"

  - by crasic

  I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

  Read the article

• Serious problem with mobile modems in UBUNTU to look [on hold]

  - by kitten 94

  I use mobile broadband using data card(modem) with simcard on ubuntu 14.04. My friends,relatives,boss used to make phone call to my sim on modem, & they get the ringsound on their phone but I cannot find any alert on ubuntu about the phone call. They think that I will call back to them & gets disappointed. Some even gets angry "that I am not attending the mobile call intensionally". They even do not not believe me,saying that computer can also pick a mobile call keeping mobile partner in their mind . Is there any way just to find out call & who it is call ? so that I can call to them later. or Is their any software like mobile partner to ubuntu to recive & make phone calls? Modem Manager GUI is helpful only just to send SMS, even USSD not works in it, inorder to receive SMS I have to close & open the windows repeatedly. please,please help me. Any help or ideas is thankful. Waiting for your's reply.

  Read the article

• certain files not syncing

  - by Josh

  I have UbuntuOne set up to sync a one folder with a number of subfolders. For some reason some of the subfolders have stopped syncing. Within one subfolder with 6 subfolders in it, some are showing up empty (they shouldn't be) and some are showing up with only some of the files they should contain. I have synced recently, and newer files are showing up in other subfolders. There's just some problem with these particular folders. They are not especially big nor do they have especially big files in them. Thoughts?

  Read the article

• How to change key binding for Tmux

  - by Severin

  I want to change the key binding in Tmux so I can use Ctrl + Alt instead of Ctrl + b This is my (unfortunately) not working try to do so. unbind C-b set -g prefix M-C What's wrong with this? Thought I followed the documentation for the keys.

  Read the article

• Can't open Evolution CouchDB address book

  - by Amanda

  Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. I tried the solution (and suggestions) in Evolution has no access to couchdb but that isn't working for me. I tried stopping desktopcouch-service and deleting my access keys and now the error I get says Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. Detailed error message: Address Book does not exist Do I need to create my addressbook anew?

  Read the article

• Why when I log in my two screens shows the same image automatically?

  - by forellana

  When I log in on my computer, first my two monitors shows their own part of a larger desktop, then automatically changes to the same image on both screens, but I don't want to happen this, Is there any configuration to avoid this? About my hardware: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

  Read the article

• Samsung driver for notebooks in Natty?

  - by burli

  Hi, I have a Samsung N150 Netbook and I installed Unity 11.04 to make some tests. But some functions do not work like backlight and vertical scroll on the touchpad. There are drivers for samsung notbooks and I know that there is a PPA. But not for Natty. Will the drivers be avalible some day in the kernel by default? Will Canonical add these drivers in the kernel, if the Kernel developers wont? I think this would be very usefull because Unity is great for Netbooks and Samsung Netbooks are really nice.

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• Can I hide running applications from the unity launcher?

  - by Chris Whelan

  When running UNE 10.10 I often have several applications running which on a traditional GNOME desktop environment would be running purely in the background and would only be visible from the system tray. Good examples would be tomboy when hidden or redshift. Unfortunately Unity shows a running application in the launcher (dock) for these applications even though they already have appindicators visible in the sys tray. Is there any way to configure/force Unity not to show icons in the dock for certain applications?

  Read the article

• WiFi AdHoc Network: Unable to access peer by ip

  - by Pranav

  I've set up a WiFi AdHoc network in Maverick and selected the IPv4 settings as "Shared to other computers". On the client computer, I joined the network with the same SSID and set IPv4 method to Manual and I gave it an IP 10.42.43.2 (As on the first computer, the auto generated IP was 10.42.43.1). From either of the computers, I'm not able to access the other using the IP (in browser). Any idea why? (If I browse to 10.42.43.1 from the first computer, it works) Thanks!

  Read the article

• Ubuntu boots in read-only filesystem after upgrade!

  - by akatzbreaker

  I got a serious problem here: I recently upgraded to the Latest Version of Ubuntu. Now, I boot to my Ubuntu Partition, and I get a Low-Graphics error! I boot to a Recovery-Mode to see what the Problem is. Then, I try to Fix any Damaged Packages, to run fsck but nothing solved the Problem. Then, from the Recovery Menu, I open a Root Shell. I try to create a File and I understand that the Filesystem is Read-Only. Then, I run: mount -o remount,rw / and it Worked for that Terminal Session! When I go back to recovery, I select to resume Boot Normally but I get the Same Error! a I also tried to Boot to my Root Shell again, remount as Read-Write and Start Gnome from there. It Worked! (But the user is ROOT, and is quite Dangerous!) However, I can't do all this proccess at every boot! Any Solution? (Note that when I try to create a new File in my Ubuntu Partition from another OS, I don't get any Errors!)

  Read the article

• How to customize live Ubuntu CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Thanks in advance! Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Note I do not prefer Remastersys, manual way will be appreciated. updates I want the panel to be placed at the bottom. I want to paste my samba configuration file instead of default samba configuration. And i have few firefox shortcuts and Folders, i have to show that in Desktop. Also it will be nice if you say me how to change the icon sets. Recent Updates I have customized ubuntu 10.10 with firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• Restoring two finger middle click again

  - by Thomas A.

  it used to be that tapping two fingers on the touchpad send a middle mouse click. Now it does a right click and three fingers now are the middle click. I really can't understand the change and think it is a bug or badly copied from Apple or something. The reasoning escapes me totally. I use middle click to open links in a new tab in the browser all day and I rarely use right click (and I have a right mouse button below the touchpad, doh) Tapping three fingers on my tiny EeePC touchpad is next to impossible so I want the old behavior. I found: synclient TapButtons2=2 synclient TapButtons3=3 but that did not work on 10.10 Does anyone know how to restore sane behavior?

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• Ubuntu 12.04 resolution stuck on 640x480

  - by user212483

  I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I started playing around with the dual booted windows 7 on my computer. Now, I've never used that windows since I installed it so I was stripped down to bare minimum so I tried to adjust the resolution(as it was on lowest resolution) and tried to connect the HDMI, which didn't work. After that I came back to my Ubuntu installation only to find out that it is now stuck on 640x480 resolution. I tried to remove the driver that I installed again using the "additional drivers" program but that didn't help at all. The error that showed up was - Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Any help would be appreciated as this is very annoying. Thanks

  Read the article

• My laptop shuts down when I remove the charger

  - by Hakim0

  Laptop shuts down when charger is removed. As well I get a message when booting up saying disk drive for /media/3936-3939 is not ready or not present. About a week ago I was trying to install a matlab iso file using mount commands etc... I tried mount, fuseiso, and UNETbootin. I have a feeling this may have something to do with message I'm getting from booting up. If anyone can point me in the right direction or help me out. Many thanks.

  Read the article

• what other bash variables are available during execution such as $USER that can assist on my script?

  - by semi-newbie

  This is related to question 19245, in that one of the responders answered the question in an awesome way, and very VERY clear to any newbie. Now here is a question that i can't seem to figure. i wrote a script for starting the vmware firefox plugin (don't worry. i gave that up and now run vBox VERY happily. i left vmware for my servers :) ) I needed to start the plugin as sudo, but i also needed to pass an argument (password) to it, that happen to be the same. So, if my password was Hello123, the command would be: sudo ./myscript.sh hi other Hello123 running from command line, the script would ask for my sudo password and then run. i wanted to capture THAT password and pass it as well. i also wanted to run graphically, so i tried gksudo, and there is an option -p that returns the password for variable assignment. well, that was a nightmare, because i would still get prompted for the original sudo: see below Find UserName vUser=$USER Find password (and hopefully enable sudo) vP=gksudo -p -D somedescriptiontext echo Execute command gksudo ./myscript.sh hi $vUser $vP and i still get prompted twice. so my question is tri-fold: is there a variable i can use for the password, just like there is one for user, $USER? is there a different way i should be assigning the value resulting of the command i have in $vP? i am wondering if executing the way i have it, does it in an uninitiated session and not the current one, since i am getting some addtl warning type errors on some variables blah blah i tried using Zenity to just capture the text, but then of course, i couldn't pass that value to sudo, so i could only use as a parameter, which puts me back in 2 prompts. Thanksssssssssss!

  Read the article

• Multiple Issues - USB booting Ubuntu 12.04

  - by Pixelishus

  I've been using a Ubuntu 12.04 off a bootable USB stick so I can have a portable OS. Also, OS variety. I've been using it for a while and I'm still have a few issues. First and most annoying, it often lags/freezes. I'm not sure what word you would use for it, windows will often stop working and go dark/not responding from anywhere between 10 seconds to a full minute and on some occasions, even longer. However, the window eventually starts working again. Similarly, sometimes the whole system will freeze, not just the window. The mouse will still move, but nothing will work. No clicking, no menus, not keyboard shortcuts. Again, it will usually start working. I'm liking Ubuntu a lot, but those issues can make it annoying to use sometimes. For example, it will ALWAYS freeze at some point if I try to watching a Youtube video and I'll have to wait for a minute or so until it starts responding, again. Aside from the lag/freezing, anytime I download packages, it will always say "package operation failed" when it's done, though it does seem to download/install. Another issue I'm having is with shutting down. If I open the logout/shutdown menu and click shutdown, it just logs me out and takes me to the login screen. If I try shutting down through the login screen, it won't do anything. As if I didn't even go to it. I've been using the terminal to reboot or shutdown when I need to. I've looked around for answers for all of these problems and still have yet to find a solution that works. Are these just normal issues with USB booting? I haven't installed Ubuntu to any computers, I've always done USB booting.

  Read the article

• Re-installing Ubuntu without losing files, how to?

  - by moraleida

  Sometime back i bought a second PC to serve as my backup machine, but i've never managed to have it as i would like. Now i want to start over, but i've messed so much with it's disks that i'm kinda afraid to lose something on the way, thus this question. Right now, I have a 1Tb disk partitioned like this (as per GParted): /dev/sda1 (ext4) 346.12Gb - Is almost full, has an old install of Ubuntu 11.10. It no longer boots, ever since i installed Windows7 on /sda3. Everything that matters to me is tucked into /var/www/ all the rest can just go. /dev/sda2 (ext4) 196.45Gb - has an old install of 12.04 and nothing important, it's pretty much empty and also doesn't boot. /dev/sda3 (ntfs) 377.97Gb - is my boot partition with Windows 7, some important files and I'd like to keep it untouched. /dev/sda4 (extended) 10.97Gb - was created when i first installed Ubuntu, i think. In my ideal world, I'd like to safely reinstall Ubuntu from the 12.04 liveUSB and merge sda1 and sda2 without losing any files. Is that possible? How?

  Read the article

• How to customize the Ubuntu Live CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Note: I do not prefer Remastersys, manual way will be appreciated. Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Configuration file changes I want the panel to be placed at the bottom I want to paste my Samba configuration file instead of default Samba configuration I have few Firefox shortcuts and folders I would like to show that in Desktop Also it will be nice if you say me how to change the icon sets Recent Updates I have customized Ubuntu 10.10 with Firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• I have Ubuntu only and need to install Windows

  - by Terzuz

  I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

  Read the article

• Windows partition UNKNOWN after Ubuntu installation attempt at dual boot - How to fix?

  - by user285645

  The idea was to install Win 7 and Ubuntu with dual boot. However, after installation, Gparted shows a /dev/sda1 as an 'unknown' filesystem and its size is 278 GB. All my windows files, data are in this partition. THen, there's /dev/sda2 with 'EXT4' filesystem (size-9.54 GB) - created during Ubuntu install. Then, there's /dev/sda3 with 'extended' filesystem (size- 10.5 GB) - created during Ubuntu install. Then, there's /dev/sda5 with 'linux swap' filesystem (size- 2 GB) - created during Ubuntu install. Then, there's /dev/sda6 with 'ext4' filesystem (size- 8.5 GB) - created during Ubuntu install. MY questions are: What exactly does this Gparted output above mean? How to recover my previous Windows 7 installation that's in /dev/sda1 (NTFS). I have some important files I need. Also, I had a PGP encryption on the disk before installing Ubuntu. Now, it just boots straight into Ubuntu... why? How to uninstall Ubuntu (the Try ubuntu and uninstall did not work. the boot-repair did not work) I have read other topics but noone has provided a proper step by step answer to how to recover my 278GB WIndows partition. The testdisk step by step procedure did not work. It says the NTFS disk is unrecognized.

  Read the article

• Can't install Ubuntu 12.04 64-bit on a dual-drive MacBook Pro 8,2

  - by kizdp

  Good afternoon, this is the first time I participate here as I'm new to Linux. I've been trying to solve the following problem for over a week without any sign of success so I hope there's a much more knowledgeable person here that can give me a solution. I have an early 2011 MacBook Pro (8,2) with Mac OS X running in a SSD. Then, instead of the Optical bay, I have a HDD in where I would like to install Ubuntu to run it natively. I've tried to do the normal installation process, with or without rEFIt, but it seems the problem resides on the communication between the device containing the Ubuntu .iso file and the laptop. It doesn't allow communication with the boot CD or USB drive. It usually says: “Loading bootlogo...” after I click on the “boot from CD, Linux Icon”. After trying several things, I would like to know if I could install Ubuntu on the HDD as an external HDD (using a friend's Window's system) and then simply put it back into my laptop so as to become an Internal HDD again. I guess, I would have to reinstall many drivers and so on, but would this approach work? Thanks in advance and sorry for this huge block of text

  Read the article

• Install/Downgrade kernel to v3.5.5 on Ubuntu 13.04

  - by Villi Magg

  I've been looking around the internet for a solution to downgrade the kernel from 3.8 to 3.5.5 since I've got the AMD/Ati Radeon Mobility HD 5600 graphic card on my machine. This video card in unfortunately not supported by the 3.8 kernel. And then when I've downgraded the kernel I need to install a version 12.* of the AMD Catalyst driver. There is too much in stake to wipe out the current installation of the OS and install an older OS. So I would like to avoid doing that to the ends of the world. Hope someone can help me with this one? Kind regards! Villi Magg.

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >