Search Results

Search found 9276 results on 372 pages for 'chris driver'.

Page 248/372 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

  • Kill overscan for ATI drivers?

    - by joeforker
    I have a dual-boot Windows 7 64 bit/Linux 64 bit machine that uses ATI's Catalyst drivers. Sometimes I attach it to a 1080p LCD TV over HDMI. ATI is daft enough to provide a border to account for overscan. I'm using an LCD TV. No overscan, or it looks like crap because the pixel mapping is not 1:1. How do I disable this driver "feature" in Windows? in Linux?

    Read the article

  • IEEE 1394 Firewire Card is not visible in Device Manager in WIndows 7

    - by Shyam
    I have a IEEE 1394 card that I have placed in one of the PCI slots of my Windows 7 PC. I have moved to Windows just last week and Windows is not detecting this card. It is not listed in the Devide Manager. Earlier when I used Fedora 12, I was able to use this interface for capturing videos from my DV Camera. The manufacturer is Tech-Com, which has not provided a driver CD for this. What can I possibly try?

    Read the article

  • Win7 + SysPrep + CloneZilla = lost settings

    - by oshirowanen
    I've just cloned a PC (Win7 + SysPrep + CloneZilla) and after starting up the new clone, Win7 wants to be reactivated again and the video driver seems to be missing (as in the aero effect has disappeared from the new clone) and the internet connection settings seem to be missing too. All those were set in the master before running SysPrep. Why have these settings been lost? The master PC was had windows 7 activated using a volume license key, and the clone pc is the same make and model as the master computer.

    Read the article

  • System Event ID 11 Disk

    - by Guy Thomas
    Upon starting Windows Server 2008 R2 I get this error message: Event ID 11 Disk The driver detected a controller error on \Device\Harddisk3\DR3. There are also also 3 more similar messages for Harddisk 2, 4, and 5, but not zero or 1. Checking the event viewer reveals it's been going on for 3 months. I ran chkdsk - no bad sectors. Any advice on the cause, better still, a solution?

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

    - by MIDoubleKO
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • Can i run this monitor ?

    - by akshay
    I am upto buying new Monitor for mine desktop here are some specs.and you please help me choose a better one (an which one will work)? Graphics property of system : Intel(R) 82845G Graphics Controller Memory 64 MB Memory type 2 Driver version 6.13.01.3317 Monitors i think will be good is. Monitor : http://www.google.com/products/catalog?q=viewsonic+22&cid=10503070423897692907&ei=MKj_S5OGCpOgjgSghsX2CA&sa=title&ved=0CAcQ8wIwADgA&os=tech-specs

    Read the article

  • IDE Controller Error causing BSOD?

    - by Wesley
    Hi all, So I was thinking before that a series of "SideBySide" errors were causing BSODs on my netbook (Samsung N120 + 2GB RAM). But I think it is an "atapi" error which says: "The driver detected a controller error on \Device\Ide\IdePort0." Has anyone else had this error and is there a fix for it? Also, I had other "atapi" errors before it saying: "The device, \Device\Ide\IdePort0, did not respond within the timeout period."

    Read the article

  • Has anyone gotten Plan9 working in VirtualBox?

    - by Electrons_Ahoy
    More than anything, I'm just curious to know if this is even possible, since Plan 9 isn't in the list of GuestOSes on the VirtualBox website. However, if someone out there has got it working, my specific question: Whenever I try to boot Plan9, either as a live cd or to install inside of VirtualBox, once the GUI loads all I get is a screen of garbage. I think I've tried just about every graphics driver combination at startup - specifically, even 640x480x8 in VESA mode didn't work. Any suggestions as to how I can load it?

    Read the article

  • Dell Vostro 1000 audio and wireless NIC drivers

    - by Ssvarc
    I have a Dell Vostro 1000 laptop with a fresh XP Pro install. I'm trying to track down the correct audio and wireless NIC drivers. I've used this Dell support driver page, but the drivers it gives for the service tag and XP OS don't work. Anyone have links to the correct, working drivers?

    Read the article

  • Win 7 client print spooler service keeps stopping

    - by Saif Khan
    I have a Windows 7 (32 bit) client where it's print spooler keeps stoppong a few seconds after I restart it. The event log doesn't provide any clear error, "The print spooler service stopped unexpectedly...it did this x times". I can seem to find any information on this. T tried un-installing whatever print driver was there...same thing. Any other ideas?

    Read the article

  • "vagrant up" fails with "NS_ERROR_CALL_FAILED" error [on hold]

    - by TahitiPetey
    I am following the basic "Getting Started" guide: http://docs.vagrantup.com/v2/getting-started/index.html I ran vagrant init <etc> followed by vagrant up, but it fails with "NS_ERROR_CALL_FAILED" error. Then by enabling debug logging with VAGRANT_LOG=debug vagrant up, I get the following error output: ERROR vagrant: /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/plugins/providers/virtualbox/driver/base.rb:316:in `execute' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/plugins/providers/virtualbox/driver/version_4_2.rb:165:in `import' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/plugins/providers/virtualbox/action/import.rb:15:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/builtin/handle_box_url.rb:72:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/plugins/providers/virtualbox/action/check_accessible.rb:18:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/runner.rb:61:in `block in run' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/util/busy.rb:19:in `busy' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/runner.rb:61:in `run' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/builtin/call.rb:51:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/builtin/config_validate.rb:25:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/plugins/providers/virtualbox/action/check_virtualbox.rb:17:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/warden.rb:34:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/builder.rb:116:in `call' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/runner.rb:61:in `block in run' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/util/busy.rb:19:in `busy' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/action/runner.rb:61:in `run' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/machine.rb:147:in `action' /Applications/Vagrant/embedded/gems/gems/vagrant-1.2.2/lib/vagrant/batch_action.rb:63:in `block (2 levels) in run' INFO interface: error: There was an error while executing `VBoxManage`, a CLI used by Vagrant for controlling VirtualBox. The command and stderr is shown below. Command: ["import", "/Users/me/.vagrant.d/boxes/precise32/virtualbox/box.ovf"] Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% Interpreting /Users/me/.vagrant.d/boxes/precise32/virtualbox/box.ovf... OK. 0%... Progress object failure: NS_ERROR_CALL_FAILED My system setup info: Vagrant 1.2.2 VirtualBox 4.2.14 (Also tried 4.2.10, same error) Mac OSX 10.8.3

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

    - by user37968
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • SQL Server 2000 Client won't connect

    - by alimack
    One day instead of connecting to the database my SQL Server Management gave me the following error: "Data Source name not found & no default driver found" Note it had been working for several years before this, all that had changed was an upgrade to Office (97 -2000) and the monthly Windows patches. I tried rebooting, re-installing both the SQL Server 2000 and 2005 clients on the machine but no joy. I can access the database(s) from other machines.

    Read the article

  • Remote Wonder II or similar under Windows 7 64-bit

    - by Albert
    Under XP I could use a Remote Wonder II from ATI to control my music (play, pause, next, previous, etc). This product does not work under Windows 7 64-bit because of driver issues and it seems to be an orphan product. My question is: Does a similar product exist that works under Windows 7 64-bit???

    Read the article

  • Why apcupsd won't see the UPS connected to the USB posrt on FreeBSD 8.0 amd64

    - by Max Kosyakov
    Hello, Recently I installed an apcusbd on a FreeBSD 8.0 amd64 box via ports system. It installed perfectly but it won't run. Here what is says in the log: FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device It appeared that HID driver picked the /dev/ugen4.2 which could cause the apcusb being unable to find the device. After I had discovered this, I rebuilt the kernel and removed the hid driver. Now it just shows "ugen4.2: <Tripp Lite> at usbus4" and no uhid0 device appears. Nevertheless the problem persisted. I tried to leave the DEVICE config setting blank --- won't help. Then I specified the particular device in the config, but it did not help either. Below you is the output of several commands that can provide some useful information on my case. server# /usr/local/etc/rc.d/apcupsd start Starting apcupsd. server# tail /var/log/messages | grep apcupsd Jun 17 22:30:00 server apcupsd[1520]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see . Jun 17 22:30:00 server apcupsd[1520]: apcupsd error shutdown completed server# cat /usr/local/etc/apcupsd/apcupsd.conf ## apcupsd.conf v1.1 ## UPSCABLE usb UPSTYPE usb DEVICE /dev/ugen4.2 LOCKFILE /var/lock UPSCLASS standalone UPSMODE disable server# dmesg | grep '^u' uhci0: port 0xa800-0xa81f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f00 usbus0: on uhci0 uhci1: port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: on uhci1 uhci2: port 0xac00-0xac1f irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus2: on uhci2 usbus3: EHCI version 1.0 usbus3: on ehci0 uhci3: port 0xa080-0xa09f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0f00 usbus4: on uhci3 uhci4: port 0xa400-0xa41f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: on uhci4 uhci5: port 0xa480-0xa49f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x0f00 usbus6: on uhci5 usbus7: EHCI version 1.0 usbus7: on ehci1 uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ugen4.2: at usbus4 server#

    Read the article

  • Few questions on dvd ram/rom

    - by Nrew
    Why other dvd rom/ram can read data from scratched disk and others cannot. For me its a comparison between LG and Lite On. Lite on, gets errors while reading disk with scratches. LG can read disk with scratches with no problems. Why is that? Is it possible to modify the software or the driver of the dvd rom so that it won't get errors when copying data from disk with scratches?

    Read the article

  • Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

    - by BraeburnDev
    I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

    Read the article

  • How to make the PC speaker beep from the Windows 7 command prompt?

    - by oKtosiTe
    I'm running some lengthy video encodes using the Handbrake command line interface. After all my encodes are done, I would like to have the PC speaker beep, as I usually turn my large external speakers off. On Linux I would install the "beep" package, but so far I haven't found such a program for Windows 7. Possibly related links: System "Beep" sound does not function in Windows Vista x64 with HD Audio devices (I am indeed using an HD Audio device: the SoundMAX ADI1986A) What’s up with the Beep driver in Windows 7?

    Read the article

  • JNDI Datasource Problem on Tomcat 6, Hibernate

    - by Asuman AKYILDIZ
    Hello; I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

    Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >