Search Results

Search found 10124 results on 405 pages for 'xampp mac'.

Page 249/405 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

  • How to write rules for persistent net names?

    - by ndemou
    I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

    Read the article

  • How to Monitor Network in Medium-Sized Company?

    - by Kyle Lowry
    I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

    Read the article

  • Can anyone help me make my reverse proxy actually cache?

    - by Lenary
    Hi folks, I'm trying to configure a Reverse Caching Proxy but so far have had no luck. I would preferrably like to use apache (that will be all it will be used for), but am open to solutions using other software that can also run on Mac OS X 10.6 (I have also tried using Varnish and Squid, but with no more luck). We're running a system with about 80 mac mini clients that will be requesting lots of video from a server. To reduce load, we thought we could use Apache (which comes on the macs by default) to cache this video forever (or at least as long as possible) onto the macs' disks. I have managed to get a reverse proxy set up with apache using ProxyPass etc, but when i tried to add CacheEnable disk / to the configuration, nothing happened (i do have mod_disk_cache included). Can anyone help with my issue? The apache config file is here Thanks in advance Edit: So far I have been testing it with smaller text files, and it hasn't been caching properly. This suggests it is nothing to do with us actually downloading video, but actually to do with the cache configuration.

    Read the article

  • Made a .dmg for a project; user can't open it - "no mountable file systems"

    - by dragonridingsorceress
    Hello, We don't know a great deal about Macs. We had to make an installer, and were told to try a .dmg So we put together version 1, and it seemed to work. We had one application file, which had our icon, and one folder. The user was instructed to drag these into the Applications folder, of which there was the Mac version of a shortcut in the dmg. Then we were told we needed to update files, and assured that we could do so via drag-and-drop. So we did; we dragged them into the folder in the dmg. We tested it (on the computer we were using to edit the dmg) and it seemed to work. So we burnt it onto a disk (along with a windows installer that actually works!). I've just gotten an email from the recipient. She's got a Mac laptop. She inserted the disk, doubleclicked on it, doubleclicked on the .dmg, and got a Warning: no mountable file systems. Screenshot: http://www.flickr.com/photos/97292258@N00/5101670174/ I have the dmg (not on a disk) and am able to open it with no difficulty. How can we get it to work for our recipient?

    Read the article

  • Windows mounted network drives slow after upgrading switch

    - by Kver
    On our small business network our old 10/100 consumer grade switch gave up the ghost, and we replaced it with a proper business-grade gigabyte switch. After wiring it in our Linux and Mac users immediately got back to working off of network drives; But 2 of our 3 Windows 7 PCs have suddenly experienced a tremendous slowdown with mapped network drives; Windows will become stuck "discovering" a folder causing applications to freeze when trying to open files. It will instantly display and browse files, but the moment you try to open one the bug hits. To remedy this we have our users copying files to the desktop, but it can take a few minutes while windows is stuck "calculating" the time it will take to copy. These aren't big files, mostly excel sheets less than 500KB - these operations are instant on Linux and Mac. (The third Windows machine is having no issues) I've tried remapping the drives, mapping to different drive letters, rebooting, etc. I'm at a loss, because switches are mostly transparent, and it's only after the switch was replaced that the Windows PCs started acting up. What black-magic voodoo am I missing to make Windows work? Thank you.

    Read the article

  • Un-do Windows disk convert HFS+

    - by BLAKE
    Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

    Read the article

  • Linux on MacBook Air

    - by enduser
    I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

    Read the article

  • Website always having DNS problems

    - by Root
    I moved my website from shared hosting to VPS. When it was in shared hosting all I did is updated my name servers whereas now I got my own VPS server and I used one of my domain sjdpublishing.com as the primary domain for my VPS. I created nameservers as ns1.sjdpublishing.com and ns2.sjdpublishing.com and then my actual website is creativeproperty.com.au which are pointing to ns1.sjdpublishing.com and ns2.sjdpublishing.com I am having repeated problems with my domain creativeproperty.com.au a few weeks back I had a problem which was resolved by flushing DNS and later I got similar problem which was not resolved by flushing DNS, I posted a question here and someone answered me to go to Network Settings in my MAC OSX and remove the IP as in my MAC terminal nslookup creativeproperty.com.au points to my router IP and I fixed this problem Now many of my clients were complaining that they are having same troubles accessing my website. I don't know whether its to flush DNS or change network settings or other issues. Can anyone please check my domain creativeproperty.com.au and sjdpublishing.com are having correct records or not and also can anyone tell me the best solution for this issue?

    Read the article

  • How do I fully share a Hard Drive on my Local Network?

    - by GingerLee
    I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

    Read the article

  • Sizing Switches for Storage and Production

    - by Untalented
    Couple questions. Should you always completely separate the storage network switches from production switches or are VLANs fine to segment this traffic? Is there a golden rule here? How do you properly size a switch for your environment based on the specifications the manufacturer provide (Throughput, Forwarding Throughput, Stacking Throughput, Max Mac)? If you have two switch options and one has a maximum Mac address of 8,000 vs. another with 16,0000. What does this really mean to me? How do make sure one vs. another is sized properly for me? Besides VLAN and Jumbo Frame support, is there any other "Must" haves for a virtual environments production or storage networks? There is a wealth of knowledge on sizing SANs and such, but this seems equally important and it's quite challenging to find as much information. -- Just to add some tidbits of information for the environment. This setup above is referring to the data centers which supports two different locations which have about 100 users between the two in total. The storage traffic will be iSCSI and will be 3 ESXi Hosts and one SAN housing about 2.7TB of data. Since there is currently no storage network in place (no SAN), I'm having a hard time regarding #2 to really determine what backplane throughput and switch specifications will be sufficient.

    Read the article

  • Is a modem required to be programmed when using with an internet provider?

    - by Tim
    I wonder if a modem is required to be programmed when using with an internet provider? If yes, what is the purpose of programming a modem? Do both a DSL and a cable ISP both require a modem to be used in an individual home? For example, I have a Motorola modem SURFboard Model:SB5101, Customer S/N: xxx S/N? xxx HFC MAC ID: xxx USB CPE MAC ID: xxx a coil of cable and a splitter from Comcast High-Speed internet Self-Installation Kit, which were bought 5 years ago, when I purchased Comcast internet service from its retailer www.comcastoffers.com. With them, I was hoping to reduce the amount of fee by avoiding to ask Comcast people to come over to install. But I remember at that time Comcast sent its technician here, dismissed my idea of self-installation, saying they needed to use their own modem and charging me a hefty fee, and so my equipments have never been used. I haven't been using Comcast for a long time. I wonder if my modem, cable and splitter (brand new, never used) are still good to use with an internet provider such as Comcast? If needed, we can ignore their policy and just consider the technology side? Or they are not good to use and I must throw them away like trash? Thanks and regards!

    Read the article

  • How to format my external HDD back to as "removable storage"?

    - by user990106
    Recently I formated my Seagate FreeAgent GoFlex external HDD in Mac OS X using GUID partition table since I wanted to install another Mac OS X onto that external HDD. However I changed my mind after my external HDD being formatted. Now I want to format my external HDD back to NTFS so that I can use it with my Windows 7. However, after I connected my external HDD via USB it didn't show up in my "computer" so I used "Disk Management" to check what's wrong with it. In the "Disk Management" I saw that there was one partition of my external HDD called "EFI partition" and I found that I could not delete this partition in the "Disk Management". So I tried to use "diskpart" in cmd and select the external HDD and commanded "clean". Then the EFI partition was gone and I created new volumn on that external HDD. However, after the volumn being created my external HDD did show up in my "computer" but it is in the "Hard Disk Drive" not in the "Devices with Removable Storage" as it used to be. I'm wondering if I can do anything to it to make it recognized as a "Devices with Removable Storage"?

    Read the article

  • Wireshark does not see interfaces (winXP)

    - by bua
    Short story: Wireshark is working....on my winXP-32b ... usage .... Long long time later Wireshark does not work It can't find any usefull interface (just VPN) ipconfig /all Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1490 Dual Band WLAN Mini-Card Physical Address. . . . . . . . . : SOME VALID MAC Ethernet adapter eth0: Connection-specific DNS Suffix . : xxxx Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : SOME VALID MAC Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.12.68 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168..... ..... Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Fortinet virtual adapter Physical Address. . . . . . . . . : SOME VALID MAC Following steps didn't help: Several Wireshark re-installation Several LIBPCAP re installation SP3 for winXP Any ideas welcome.

    Read the article

  • Implement OAuth in Java

    - by phineas
    I made an an attempt to implement OAuth for my programming idea in Java, but I failed miserably. I don't know why, but my code doesn't work. Every time I run my program, an IOException is thrown with the reason "java.io.IOException: Server returned HTTP response code: 401" (401 means Unauthorized). I had a close look at the docs, but I really don't understand why it doesn't work. My OAuth provider I wanted to use is twitter, where I've registered my app, too. Thanks in advance phineas OAuth docs Twitter API wiki Class Base64Coder import java.io.InputStreamReader; import java.io.BufferedReader; import java.io.OutputStream; import java.io.IOException; import java.io.UnsupportedEncodingException; import java.net.URL; import java.net.URLEncoder; import java.net.URLConnection; import java.net.MalformedURLException; import javax.crypto.Mac; import javax.crypto.spec.SecretKeySpec; import java.security.NoSuchAlgorithmException; import java.security.InvalidKeyException; public class Request { public static String read(String url) { StringBuffer buffer = new StringBuffer(); try { /** * get the time - note: value below zero * the millisecond value is used for oauth_nonce later on */ int millis = (int) System.currentTimeMillis() * -1; int time = (int) millis / 1000; /** * Listing of all parameters necessary to retrieve a token * (sorted lexicographically as demanded) */ String[][] data = { {"oauth_callback", "SOME_URL"}, {"oauth_consumer_key", "MY_CONSUMER_KEY"}, {"oauth_nonce", String.valueOf(millis)}, {"oauth_signature", ""}, {"oauth_signature_method", "HMAC-SHA1"}, {"oauth_timestamp", String.valueOf(time)}, {"oauth_version", "1.0"} }; /** * Generation of the signature base string */ String signature_base_string = "POST&"+URLEncoder.encode(url, "UTF-8")+"&"; for(int i = 0; i < data.length; i++) { // ignore the empty oauth_signature field if(i != 3) { signature_base_string += URLEncoder.encode(data[i][0], "UTF-8") + "%3D" + URLEncoder.encode(data[i][1], "UTF-8") + "%26"; } } // cut the last appended %26 signature_base_string = signature_base_string.substring(0, signature_base_string.length()-3); /** * Sign the request */ Mac m = Mac.getInstance("HmacSHA1"); m.init(new SecretKeySpec("CONSUMER_SECRET".getBytes(), "HmacSHA1")); m.update(signature_base_string.getBytes()); byte[] res = m.doFinal(); String sig = String.valueOf(Base64Coder.encode(res)); data[3][1] = sig; /** * Create the header for the request */ String header = "OAuth "; for(String[] item : data) { header += item[0]+"=\""+item[1]+"\", "; } // cut off last appended comma header = header.substring(0, header.length()-2); System.out.println("Signature Base String: "+signature_base_string); System.out.println("Authorization Header: "+header); System.out.println("Signature: "+sig); String charset = "UTF-8"; URLConnection connection = new URL(url).openConnection(); connection.setDoInput(true); connection.setDoOutput(true); connection.setRequestProperty("Accept-Charset", charset); connection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded;charset=" + charset); connection.setRequestProperty("Authorization", header); connection.setRequestProperty("User-Agent", "XXXX"); OutputStream output = connection.getOutputStream(); output.write(header.getBytes(charset)); BufferedReader reader = new BufferedReader(new InputStreamReader(connection.getInputStream())); String read; while((read = reader.readLine()) != null) { buffer.append(read); } } catch(Exception e) { e.printStackTrace(); } return buffer.toString(); } public static void main(String[] args) { System.out.println(Request.read("http://api.twitter.com/oauth/request_token")); } }

    Read the article

  • Arduino Ethernet Shield Not Connecting to WebServer

    - by new user
    I have a problem making my Arduino Ethernet shield to communicate with the server, the result on the serial monitor is always: my arduino code is #include <Ethernet.h> //library for ethernet functions #include <SPI.h> #include <Dns.h> #include <Client.h> //library for client functions #include <DallasTemperature.h> //library for temperature sensors // Ethernet settings byte mac[] = {0x09,0xA2,0xDA,0x00,0x01,0x26}; //Replace with your Ethernet shield MAC byte ip[] = { 192,168,0,54}; //The Arduino device IP address byte subnet[] = { 255,255,255,0}; byte gateway[] = { 192,168,0,1}; IPAddress server(192,168,0,53); // IP-adress of server arduino sends data to EthernetClient client; bool connected = false; void setup(void) { Serial.begin(9600); Serial.println("Initializing Ethernet."); delay(1000); Ethernet.begin(mac, ip , gateway , subnet); } void loop(void) { if(!connected) { Serial.println("Not connected"); if (client.connect(server, 80)) { connected = true; int temp =analogRead(A1); Serial.print("Temp is "); Serial.println(temp); Serial.println(); Serial.println("Sending to Server: "); client.print("GET /formSubmit.php?t0="); Serial.print("GET /formSubmit.php?t0="); client.print(temp); Serial.print(temp); client.println(" HTTP/1.1"); Serial.println(" HTTP/1.1"); client.println("Host: http://localhost/PhpProject1/"); Serial.println("Host: http://localhost/PhpProject1/"); client.println("User-Agent: Arduino"); Serial.println("User-Agent: Arduino"); client.println("Accept: text/html"); Serial.println("Accept: text/html"); //client.println("Connection: close"); //Serial.println("Connection: close"); client.println(); Serial.println(); delay(10000); } else{ Serial.println("Cannot connect to Server"); } } else { delay(1000); while (client.connected() && client.available()) { char c = client.read(); Serial.print(c); } Serial.println(); client.stop(); connected = false; } } the server is an Apache server running on a pc, the server ip address in the code is the pc ip address. For testing purposes I work at my homes network, there's no proxy or firewall, and I also turned of the antivirus and firewall on my pc. the result in the serial monitor is always: Not connected Cannot connect to Server Any thoughts??

    Read the article

  • PHP SOAP Error: maximum string content length quota (8192) has been exceeded while reading XML data

    - by Sadi
    I am trying to use bing with PHP SOAP. It works fine for short strings. But for larger string I get following error: Fatal error: Uncaught SoapFault exception: [a:DeserializationFailed] The formatter threw an exception while trying to deserialize the message: Error in deserializing body of request message for operation 'Translate'. The maximum string content length quota (8192) has been exceeded while reading XML data. This quota may be increased by changing the MaxStringContentLength property on the XmlDictionaryReaderQuotas object used when creating the XML reader. Line 9, position 227. in ........ I am using XAMPP in windows 7. All the solution I found are for .net not the PHP. PHP has no web.config file as far as I concern. Any idea how can I solve it. Thank you Sadi

    Read the article

  • Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

    Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

    Read the article

  • ERRNO: 8192 when trying to send mail

    - by chupinette
    I have the following code which works when i put it in any blank php page,but when i tyr to put the code in another php page where i already has some codes in it, i get the error: ERRNO: 8192 TEXT: Assigning the return value of new by reference is deprecated LOCATION: C:\xampp\php\PEAR\Mail.php, line 154, include('Mail.php'); $mail = Mail::factory("mail"); $headers = array("From"=>"[email protected]", "Subject"=>"Your order has been placed "); $body = "lol"; $mail->send("[email protected]", $headers, $body);

    Read the article

  • How to implement Comet server side with Python?

    - by Morgan Cheng
    I once tried to implement Comet in PHP. Soon, I found that PHP is not suitable for Comet, since each HTTP request will occupy one process/thread. As a result, it doesn't scale well. I just installed mod_python in my XAMPP. I thought it would be easy to implement Comet with Python asynchronous programming. But still cannot get a clue how to implement it. Is there any idea how to implement Comet in mod_python?

    Read the article

  • Begin the Clone Wars Have!

    - by Antony Reynolds
    Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

    Read the article

  • Opening a local file in Eclipse from the web

    - by Victor Nicollet
    Right now, when I notice a problem on a page on my PHP web site, I have to look at the URL, mentally deduce what file is responsible for displaying that page, then navigate the Eclipse PDT file tree to open that file. This is annoying and uses brain power that could have been applied to solving the issue instead. I would like my PHP web site to display on every page a link that I could click to automatically open the correct file in Eclipse. I can easily compute the complete absolute path for the file I need to open (for example, open C:/xampp/htdocs/controllers/Foo/Bar.php when visiting /foo/bar), and I can make sure that Eclipse is currently open with the correct project loaded, but I'm stuck on how I can have Firefox/Chrome/IE tell Eclipse to open that specific file.

    Read the article

  • Integrating NetBeans for Raspberry Pi Java Development

    - by speakjava
    Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

    Read the article

  • mysql compatability error - rake aborted error on rake db:create

    - by user1904563
    I'm a starter in ROR I' m using ruby 1.9.3 and rails 3.2.1 This is what appears on using rake db:create command **>rake db:create rake aborted! Please install the mysql adapter: 'gem install activerecord-mysql-adapter' <can't activate mysql <~> 2.8.1>, already activated mysql-2.9.0-x86-mingw32. Make sur all dependancies are added to Gemfile.>** Have installed mysql gem and copied libmysql.dll file to Ruby193/bin (Phpmyadmin and xampp also works good). Please help me to solve this issue.

    Read the article

  • How do you backup your localhost ?

    - by justjoe
    i have method to backup my work on localhost based on week basis. i use multipe dos command and save in on a bat file. i use command such as copy and xcopy and save my localhost to another place. After my server grow larger, i think it take too much space. So tehre is a way to solve this problem ? maybe a software that can track changes on our php code. EDIT : I use windows xp sp2, on XAMPP Apache PHP 5.2.1 the localhost refer to my laptop. i install the localhost server here

    Read the article

  • CodePlex Daily Summary for Saturday, August 16, 2014

    CodePlex Daily Summary for Saturday, August 16, 2014Popular ReleasesTEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastBinaryJSON: v1.4.2: v1.4.2 - bug fix circular referencesfastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????(???-5929)。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????(LZOM-5932)。 -BodyPadding???????,??“5”“5 10”,???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????,??????????????(Jango_Jing-5450)。 -???????????DataKeyNames???????????(yygy-6002)。 -????????????????????????(Gnid-6018)。 -??PageManager???AutoSizePanelID????,??????????????????(yygy-6008)。 -?FState???????????????,????????????????(????-5925)。 -??????OnClientClick???return?????????(FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.HP OneView PowerShell Library: HP OneView PowerShell Library 1.10.1193: [NOTE]: The installer has been updated, only to allow the user to display What's New at the completion of the install. The contents are the same as the original installer. Branch to HP OneView 1.10 Release. NOTE: This library version does not support older appliance versions. Fixed New-HPOVProfile to check for Firmware and BIOS management for supported platforms. Would erroneously error when neither -firmware or -bios were passed. Fixed Remove-HPOV* cmdlets which did not handle -forc...MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...Python Tools for Visual Studio: 2.1 RC: Release notes for PTVS 2.1 RC We’re pleased to announce the release candidate for Python Tools for Visual Studio 2.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, editing, IntelliSense, interactive debugging, profiling, Microsoft Azure, IPython, and cross-platform debugging support. PTVS 2.1 RC is available for: Visual Studio Expre...Sense/Net ECM - Enterprise CMS: SenseNet 6.3.1 Community Edition: Sense/Net 6.3.1 Community EditionSense/Net 6.3.1 is an important step toward a more modular infrastructure, robustness and maintainability. With this release we finally introduce a packaging and a task management framework, and the Image Editor that will surely make the job of content editors more fun. Please review the changes and new features since Sense/Net 6.3 and give a feedback on our forum! Main new featuresSnAdmin (packaging framework) Task Management Image Editor OData REST A...Touchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesModern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...New Projects2113110030: name: pham van long code: 2113110030 subject: oop2113110033: Name: Nguyen Hoang Minh Class: CCQ1311LA Object: OOP2113110284: name: Vuong Thành Ðô id:2113110284 class: CCQ1311LA2113110286_OOP_kiemtra: Mon:OOP Tên: Lê Th? Ng?c Huy?nCRM Queue Monitor: A small tool to monitor queues in Microsoft dynamics CRM 2011 and following versions. It displays the number of items in the queues and the latest item.Dice Bag: A D20 Role Playing Game Dice Bag - A selection of dice for use in the D20 RPG System that can be rolled to any quantity with an applied modifier.DM.Dual-coloredBall: DM.Dual-coloredBallFB Account Data Miner by Bipul Raman: A software which can be use to extract basic metadata of a Facebook profile without logging in to Facebook.huynhtanphat-2113170373: Mon: OPP Name: Huynh Tan Phatkieuquanghuy_OOP: Suject: OOP Name: kieuquanghuy Class: CCQ1311LAMySale: A simple home point-of-sale application, designed for garage sales, and lemonade stalls alike.nguyennhubaongan_OOP: MON: OOP NAME: NGUY?N-NHU-B?O-NGÂNOPP-2113110288: Mon: OOP Ten: Bui Dinh Hoai Nam Pequeño RAE: Una aplicación Windows para utilizar los Web services del Diccionario de la Real Academia Española en línea.phungthiphuonglien_OOP: MONHOC: OOP NAME: PHUNG THI PHUONG LIEN MSSV: 2113110287sharpFlipWall: This is a simple executive toy for Unity that leverages Kinect v2 and Shaders to generate a wall of blocks that move based on player informaitonTranThanhDanh-2113110282: Mon: OPP Name: Tran Thanh DanhWsSequence: Run a number of WS in a sequence?????: ??????????: ???????????: gdsg?????: ???????????: fds??????: gdr??????: gfdg?????: ???????????: ???????????: ???????????: ggerger?????: htryhrt??????: trjty?????: ???????????: sdf?????: ?????QQ:2281595668,?????,????,????。??????????????????????。???????????,????????,????????????????????????????。???????,??????????????。????????????,????????,?????????????: ????????????: ertyer?????: ???????????: gsdrfgds??????: fds?????: ??????????: vcdfxgdsf??????: fdgher??????: fdsf?????: ??????????: ??????????: ???????????: hiuhui?????: ??????????: ??????????: ???????????: fdsfs?????: ??????????: ??????????: ??????????: ??????????: ??????????: ??????????: ??????????: ???????????: ???????????: ??????????: ??????????: fgsdf??????: vdsfd?????: ?????QQ:2281595668,?????,????,????。??????????1998?????????。????????????,???????????????,?????????????,???????????,?2003?????????????,????????????????????????????????: ???????????: ???????????: hfdg?????: ???????????: gfdgfd??????: fdsfd?????: fdsf??????: fghdt?????: ??????????: ??????????: ??????????: gfdgfd????????: gfjhtf??????: ????????????: vdcf??????: fvgdfg??????: ???????????: ??????????: ???????????: jvbhvhv?????: ??????????: ???????????: ???????????: ??????????: ???????????: ????????????: ????????????: ???????????: ???????????: ????????????: fdsfds?????: ???????????: ???????????: ??????????: ?????QQ:2281595668,?????,????,????。???????????????????,??????????????,????,?????????????????????,??????。   ??,??????????????????????。????????,????????????,??????????: ??????????: ??????????: ??????????: ?????QQ:2281595668,?????,????,????。??????????????,??????、????、?????????????????????????,???????????? ??。???????????,??????????,???????????,????2000?,??????????,?????: ???????????: ????????????: ???????????: ???????????: ytryrt??????: ???????????: ???????????: ???????????: ??????????: ???????????: gdfgfd?????: ???????????: gfd??????: ???????????: ???????????: fdsf??????: ????????????: ????????????: gfdtgdr?????: ???????????: fdsfd?????: ??????????: ???????????: ????????????: ????????????: ???????????: ???????????: terwtq?????: ??????????: gdfg??????: ????????????: gfdg?????: ??????????: ??????????: ?????QQ:2281595668,?????,????,????。?????????????,????????????????、??????、???????、???????、?????、???、??????。 ??????????????,???????????,??????,???????,?????????????????: gdfsg?????: fdsf??????: hdfhdf?????: ???????????: ????????????: fgherh?????: ??????????: ?????QQ:2281595668,?????,????,????。?????????,????????????????????,???????????????????????????????????????????????????????????、?????????、??????、????????、?????????????: ???????????: ???????????: ???????????: ????????????: fgdstf??????: ???????????: gfdgfd??????: fdsfd??????: ????????????: ???????????: ???????????: fdsfd?????: ???????????: gfdgfdg?????: ??????????: ?????QQ:2281595668,?????,????,????。????????????????,???????,???QQ;??2008?8??????????????????,????????,?????????,?????????????,?????????????????. ?????????,??????????: ??????????: ???????????: ????????????: fgnhgf??????: gredg?????: ??????????: ??????????: ?????QQ:2281595668,?????,????,????。?????????????,???????????????????、?????????????。?????????????????,?????????????,????????????,?????,????????????????,?????,?????????: ????????????: ???????????: ???????????: ????????????: ???????????: gdfgedf??????: fdsf??????: ?????????????: ?????????????: fdsf??????: ???????????: ?????QQ:2281595668,?????,????,????。??????????????,?????????????????????,???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: fdsf?????: ???????????: fdsf??????: fdsf?????: ???????????: vuv?????: ???????????: grfgfd?????: ??????????: ??????????: ??????????: ??????????: fdsf??????: ghrd?????: ????????????: ?????????????: sgdfg?????: ???????????: grfgdf?????: ???????????: hftghj?????: ???????????: ??????????????: gdfgfd?????: ???????????: fdsf?????: ???????????: fdsf??????: htgrfh?????: ??????????: ??????????: fds??????: sdfds??????: hgfh?????: ??????????: ?????QQ:2281595668,?????,????,????。??????????????,??????、????、?????????????????????????,???????????? ??。???????????,??????????,???????????,????2000?,??????????,??????: ????????????: ???????????: fdsfds????????????: fdsf?????: ??????????: ???????????: gfdgfd?????: ??????????: ??????????: ??????????: ?????QQ:2281595668,?????,????,????。??????????????,?????????????????????,???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668,?????,????,????。????????2002?,????????,???????????????,??,?????????。????98?????????????,?????????????,?????????????????,???????,????,?????????????: ??????????: ???????????: ????????????: fd??????: fds?????: ?????QQ:2281595668,?????,????,????。??????????、??、?????????,???????????,?????????????!???????、??、?????、???.????、???、???、???、???、???、?????、?????、???????、????。?????????: ??????????: fdsfds???????: fdsfdsf?????: ???????????: ???????????: ??????????: ???????????: ????????????: fdsf?????: ???????????: ????????????: gdfsgds?????: gttrey??????: cxzc???????: ?????????????: ???????????: ???????????: gdfgfd?????: ??????????: ???????????: ????????????: ????????????: ????????????: gfdgdf?????: ???????????: ytu?????: ???????????: yytry???????: ghmkuygk??????: ????????????: ????????????: ????????????: ???????????: ???????????: ????????????: vuhgvu??????: ??????QQ:2281595668,?????,????,????。?????????,????????????????????,????????????????????????????????????????????????????????????、?????????、??????、????????、???????????: ???????????: hfgh??????: hgfh?????: ?????QQ:2281595668,?????,????,????。??????????????,???????????。??????????????。??、??、????????????。????:????,??????!??????????????,?????,???,???,??,???,???,???,?????????: ????????????: ttgers??????: iui

    Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >