Search Results

Search found 8949 results on 358 pages for 'eee pc'.

Page 250/358 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• What motherboard for a Core i7 920 Processor?

  - by jasondavis

  I am wanting to build a really nice PC, price is not to important as I will buy pieces every week or whatever it takes until I get everything I need. I am not a gamer but I would like to watch video and have 3-4 monitors. I do a lot of programming and use a lot of big programs so I would like to go all out and get a lot of Memory, probably at least 12gb but possibly more even as I see many boards support up to 24gb now. Will be using Windows 7. I have decided to go with the Core i7 920 Processor BX80601920. Based on what I posted above, can you please recommend some good motherboards I should look at ? Also some good places to purchase them online. Thanks for any help, tips, etc.

  Read the article

• wifi connection turns off oll the time

  - by er-v

  Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

  Read the article

• How can I restore my "Unknown" partition type, back to NTFS?

  - by Alan

  Lately I've been having trouble restoring my PC after uninstalling GRUB, and an Ubuntu install from it. Usually I don't encounter any problems when doing this, but this time is different. My Windows XP (NTFS) partition is listed as "Other" in Partition Magic, and "Unknown" in GParted rather than "NTFS". How can I gain access to Windows partition once again? I am more than willing to provide any information, and run any tests necessary to produce said information in order to find out what's going on here. My apologies if this is the wrong place to ask such a question. I have heard nothing but good about Superuser, and decided to give it a shot. Thanks!

  Read the article

• I want to deploy my php based web application with apache-ant. How can I do that?

  - by codeperl

  I googled it. But unfortunately did not get the specific answer. I am a fan of command line and typing. So now, I want to deploy my php based web application with apache-ant. How can I do that? Also I want to practice these deployment in my local pc. Is it possible? Phing is there and what i heard phing works on the top of apache-ant for php application deployment. But I want to face the hassel and want to write in my own hand.

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• How to route local traffic over switch?

  - by Franz Kafka

  I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

  Read the article

• After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

  - by sin

  I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Both screens always stay on after adding second monitor

  - by J.Merrill

  I had a single 1920x1080 monitor on a Windows 7 desktop PC and, per "power management" (not screen saver), the screen would go blank after 10 minutes. I added another monitor (2560x1600 if that matters) and since then, neither screen has ever blanked. I've tried turning on the "blank" screen saver, but that didn't help either -- I can go away for hours and when I come back, both screens are on. I've seen others with similar issues apparently caused by e.g. wireless mice that seem to move infinitesimally, but I've got the same wired mouse I had before. I can't understand why neither the screen saver nor power management is doing what it should to blank the screens, when "power management" used to do it when there was only one monitor. Maybe it doesn't matter so much with current LCD display technology (no "burn in") but doesn't a monitor use more power when "power management" hasn't turned off the display? Thanks for any suggestions.

  Read the article

• I set a frequency too high for my monitor. How can I get it back to normal?

  - by ChristianM

  I have a Geforce 8500GT on my PC, and I made the stupid mistake of setting it to a higher frequency than my monitor can manage. It boots up and it shows me this… and that's all. I can't do anything. The thing is that I think this video board is a little broken anyway, because when it boots up i can't see anything until Windows starts loading. But it worked fine after, no problems. I'm on my on-board video board now, and I don't know how to set the frequency back, because when I boot up with the on-board one, it says something like "changing freq" and it goes ok. How can I get the frequency back for the 8500Gt?

  Read the article

• Hardware for Capturing Packets

  - by Kevin

  One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

  Read the article

• Automatically reboot Windows8 if no internet activity

  - by GrapeCamel

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

• Windows 7 Remote Desktop with dual monitors wont wake up.

  - by dev5

  I run Windows 7 64bit with dual monitors at work. If i connect from home using remote desktop, the next morning i cannot wake up the monitors. The computer seems to be fine (i can connect again from another pc using remote desktop) but monitor will stay blank. I've tried unplugging the monitors and reconnecting them but still frustrating. The only solution is to restart the machine. Some specs if it helps. HP 3000 Pro Windows 7 Pro 64 bit ATI Radeon HD 4550 Samsung SyncMaster 2243 x2

  Read the article

• I need a script to lockdown the system time to users via gpedit.msc

  - by Chester

  I need to lockdown the system time on a number of PCs via gpedit.msc and then removing administrators from the group and then adding 'administrator' and 'polling'. Can I do this via a script? Essentially I have to; Run gpedit.msc Computer Configuration Windows Settings Security Settings Local Policies User Rights Assignment Double Click Change the system time Select Administrators Click Remove Click Add User or Group Type Administrator Click Check Names Type polling Click Check Names OK Apply OK Logoff I have to do this for a huge number of computers so is there a batch file I could run on each PC to do this? Your help would be very much appreciated. Best Regards

  Read the article

• iTunes want to remove my existing apps on iPad

  - by Michael

  Here is the situation. I connected my iPad to some new PC, Synced, then ticking Sync Apps from Devices-Apps will give me warning that all existing apps on my iPad will be replaced with those from Library-Apps. But in Library I have just couple old apps, which long time ago I used. So how I can sync the library in iTunes with my existing apps from iPad? EDIT: I have tried to click on Transfer Purchases, but not all of the items went to the library, just few of them.

  Read the article

• rsync server, uploaded files permissions incorrect

  - by fred basset

  I'm trying to setup an rsync server on my Ubuntu machine. Transfer from a local PC to the server via rsync does work, but the resultant uploaded files have no r,w or x bits set, e.g. ---------- 1 fredb fredb 0 Aug 30 20:50 sk_upgrade_20120830_033450.txt ---------- 1 fredb fredb 0 Aug 30 20:50 sk_user_20120827_184534.txt ---------- 1 fredb fredb 0 Aug 30 20:50 sk_user_20120830_033450.txt My rsyncd.conf file is: motd file = /etc/rsyncd.motd [workspace] path = /tmp comment = rsync server uid = nobody gid = nobody read only = false auth users = fredb secrets file = /etc/rsyncd.scrt How can I get the target files permissions correct? Also once I've solved this problem how can I transfer without a password? TY, Fred

  Read the article

• 64 bit Windows 7 + 32 bit windows XP dual boot?

  - by Mick

  I have purchased an i7 based PC pre-installed with 64 bit windows 7 (home premium). Unfortunately some third party 32 bit software that I need to use is not working properly (see stackoverflow.com for details). I am now torn between the plan of installing windows XP 32 bit or making it dual boot. Which option do you think will give me the least problems? And if the answer is dual boot, then can you point me to a good guide for how to do it, preferably a guide specifically for my two OS's created in this order (i.e. 7x64 first). EDIT: the performance of my 32bit programs is critical so am concerned about any kind of 32bit XP "emulation".

  Read the article

• USB port causing device problems after new motherboard upgrade

  - by enbuyukfener

  I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

  Read the article

• Windows XP - non-user input data filter message after installing wireless keyboard & mouse

  - by James

  After I installed MS wireless keyboard and mouse and associated software, I started getting this annoying message titled "Hardware installation" telling me the software I am trying to install did not pass the XP logo tests. The software is for "HID non-user input data filter" and I have two options Continue anyway or stop installation. Now, if I try to continue the installation fails, if stop installing another message pops up with a little mouse logo and the whole process repeats itself. after I am done with that message a third dialog appears. This is happening every time I boot up my PC (a desktop), I tried following an advice I found in some forum and download windows update for ID non-user input data filter, but that installation failed as well. The thing is, that both keyboard and mouse are working fine Is there anyway to get past these dialogs ?

  Read the article

• how to access a mounted device, How can I access the partitions with the console

  - by user1796624

  Hi I'm new to ubuntu and linux so this might be a very begginers question. I have several partitions on my pc and I want to be able to access them with the console. When I type: sudo fdisk -l I get: /dev/sda1 * 2048 97656831 48827392 7 HPFS/NTFS/exFAT /dev/sda2 97656832 234375167 68359168 7 HPFS/NTFS/exFAT /dev/sda3 * 234375168 312500223 39062528 83 Linux /dev/sda4 312502270 625141759 156319745 5 Extended /dev/sda5 312502272 318359551 2928640 82 Linux swap / Solaris /dev/sda6 318361600 625141759 153390080 83 Linux But it seams that the address is existing. for example I cant do cd /dev/sda4. How can I access the partitions with the console?

  Read the article

• Remove Windows 7's limitation on number of concurrent tcp connections (http web requests)

  - by Ghita

  I have an application that tries to open as many http requests as possible (in order to stress test a proxy implementation) It seems to me that Win7 (SP1) may have a limitation on number of concurrent opened connection (it may be the so called half-open state if I'm not wrong). Is there something I can do for client ? and also I test using a vista PC that acts as a proxy server. It would be great if I could configure it to sustain at least 50 new connections initiated / second on client side and many more on server. I made the modification according to this technet article by setting TcpNumConnections = 150 but it doesn't make a difference. I still only see about 20 tcp sockets associated with my http client by using tcpview.

  Read the article

• using one disk as cache for others

  - by HugoRune

  Hi Given a PC with several hard drives: Is it possible to use one fast disk as a giant file cache? I.e. automatically copying frequently accessed data to that one disk, and transparently redirecting reads and writes to that disk, so that other drives would only have be accessed occassionally. (writes would have to be forwarded to the other disks after a while of course) Advantages: the other drives could be powered down most of the time; reducing power, heat, noise speed of the other drives would not matter much. cache disk could be solid state. How can I set such a system up? What OS supports these options? Is this possible at all using Windows or Linux?

  Read the article

• Virtualization Solution for Family Use

  - by Dave Potts

  I'm trying to put together a solution for my family (wife + three kids). At the moment I have one newish desktop and a couple of aging laptops. There are always arguments over who should have the fast desktop. I'm thinking I would like to invest in a new powerful server and then run virtual desktops for each user off the server so that each user would have the same experience regardless of which actual PC they were using. I would like to use just a Linux based desktop, but unfortunately I need to support some Windows games for the kids. I've not tried wine for the games but would be willing to give it a try. Any advice on what the setup should be would be most appreciated.

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >