Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 250/365 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Static noise coming from my laptop

  - by joanna

  Replaced motherboard; speakers; put in an additional fan; but this did not stop the static noise. This was done by inhouse tech. support from Sony. If i turn my speakers mute; the sound is still there! Can't hear it through headphones. I was told it is feedback noise! Now I'm suppose to send my $2,000.00 computer through the mail to get fixed? I'm terrified it'll come back in terrible condition during the travel time? Help?

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• touchscreen in dual monitors but not as primary

  - by bazzjedi

  Hi, I have been looking for information about using a second monitor but thought of using a touchscreen will a touchscreen monitor work in dual set up, but not set up as main monitor which is the question. Can't find any information on this only when others set it has main. only this piece If you mean do the touch screen features still work on the other machine, the answer is yes. Past that, you can even see some of the touch screen features on a non touch screen monitor (just not the multi touch features!) For example, on the taskbar, click (without releasing) on any icon and then drag the mouse up, and you will see that it does the same as using your finger and dragging up. link|flag answered Feb 5 '10 at 15:14 Wil 47.4k125 have hp 2510 main thinking of hp2310ti touchscreen as secondary, grafic card geforce gtx 295- windows 7 professional regards bazzjedi

  Read the article

• Running a program causes everything afterwards to minimize

  - by Xitcod13

  I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. Is there any way to fix this? What can cause such a strange behavior?? I recently installed the internet driver. Hopefully that is not the problem because this is the third internet card for this computer. I have noticed that my internet is messing up as well.

  Read the article

• Analytics on Mobile Phones

  - by Samuh

  Tracking events and setting up Analytics for Websites seems easy. You create an account with one of the Analytics service providers like Google. They give you javascript code that you embed in your pages (whichever event you wish to track) and voila..you're done. I have written a native application for Android phones, which is actually an adaptation of the actual web site. Now, I am required to setup Analytics and tracking for this native application. Question: How to do this on Mobile phones from within a native application? We have Java Script code that works for the original web site. Is there a way to incorporate that in the native application? I know Android supports Java Script via WebViews(Webkit);my application does not have webviews and it is native. Also, I have not worked on JavaScript since school so excuse me if I sound naive. Thanks.

  Read the article

• Stereo Mix does not work

  - by rfw

  Stereo Mix no longer seems to work on my computer -- it did once, but now I am unable to receive any sort of audio from it. When trying to record it with programs such as Audacity, it reports that there is an error opening the sound device. Additionally, I can make no changes whatsoever to Stereo Mix, such as with regards to default format, where it simply reports Format not supported by device. I am sure that Stereo Mix had definitely worked in the past, so does anyone have any idea as to why Stereo Mix would suddenly break? (I have no applications taking exclusive control of Stereo Mix)

  Read the article

• Intermittent graphics issue

  - by Rob

  An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

  Read the article

• Virtualbox crashes quite often in Windows 8

  - by user1776158

  I just installed Windows 8 on my computer. I got the ISO and the product key from my university so the software itself is sound. I use alot of virtual box. And ever since I moved to Windows 8, I have noticed that virtual box crashes more often. In particular, it is very very bad at opening multiple guests. My CPU usage will be at like 20% and I only have 3 guests open and my entire computer just freezes. Cursor and all. In Windows 7, I was able to open like 6 (not that I ever needed to) and really push my CPU. I havent experience any other issues with Windows 8 yet. Has anyone encountered this? Thanks!

  Read the article

• I keep getting blue screen - Windows 7 x64 (maybe ram?)

  - by Lostman

  I have +- 5yrs old pc runnig windows 7 and I've been getting blue screen recently. I had win 8 and I got a lof of erros with ram memory, so I reinstalled back to Win 7. (I have 2x 2 GB RAM) To make a better image of my errors - I get them while writing email, installing nvidia driver, sound driver, running RAM test. I got a log of my last error, could anyone tell me what is it? Should I get new RAM memories? The last log I got: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1029 Additional information about the problem: BCCode: 1a BCP1: 0000000000000403 BCP2: FFFFF680004FAEA0 BCP3: 380000007594A867 BCP4: FFFF6680004FAEA0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\062513-16156-01.dmp C:\Users\Boss\AppData\Local\Temp\WER-32156-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt MemTest86+ Error:

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• Sony Vaio laptop constant "bi" noise when on battery

  - by Dominick1978

  I have sony vaio vgn fs215s laptop. When I use it with battery alone it makes a constant "bi" noise that gets louder on more power consuming tasks. Sometimes on startup the screen goes black before xp logo. Then i hear the windows startup sound but sill black screen. I bypassed the xp logo (via msconfig) and it gets me all the way ok but the noise is still there. There is no problem when the laptop is plugged to a socket. What do you think is the problem and how do i fix it (how much money)? Thanks a lot.

  Read the article

• What apps are available for smartphone platforms to allow free calling to the UK and other countries? [closed]

  - by Andrew Ferrier

  On the iPhone, I use MagicJack to get completely free calls over WiFi to US numbers. I'm looking for a similar app to enable me to call UK numbers for free on the iPhone. Does anyone know of one? To make this question of broader applicability to everyone, what apps also allow free calling to other countries? Any smartphone platform (iPhone, Android, Blackberry, Windows Phone) could be useful. Note: I'm talking only about apps that allow completely free calling - the Apple app stores at least are full of apps that allow "cheap" calling. Suspicious apps that require credit card numbers upfront, etc., aren't as interesting.

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• FreeBSD 9 (amd64) reboot/shutdown process is very slow

  - by nbari

  I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

  Read the article

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• Toshiba laptop only shows black screen with mouse pointer after starting up

  - by BubblySue

  I only see black screen after the startup. It just shows the logo and the status bar upon start, then it goes black screen with moveable cursor. I tried alt+ctrl+del, but it doesn't work. I pressed shift 5 times and it makes a sound. I already removed battery and restarted it, but still the same. I can go to safe mode and scanned thru there. Still, desktop won't show up. Don't know what else to check?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• MacBook Air with Bootcamp - How to partition?

  - by Andrew

  I want to buy a MacBook Air for my wife with a 128GB SSD. She has to use Windows 7 but I would like to keep OS X for myself to use somtimes. Using Bootcamp, is it feasible to install the following? Mac partition: 36GB with Mac OS X and Microsoft Office 2011 Word, Excel & Powerpoint and Skype. (minimal use) Windows partition: 92GB with Windows 7 professional and Microsoft Office 2010 Word, Excel & Powerpoint, and Skype (daily use) Media to be kept on SD card or external USB3 drive. (Note: Using Parrallels may save space, but my wife won't go for the user experience)

  Read the article

• Computer powers off then tries to start up but resets repeatedly.

  - by Sam Holder

  My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >