Search Results

Search found 7081 results on 284 pages for 'idle processing'.

Page 251/284 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• SQL -- How is DISTINCT so fast without an index?

  - by Jonathan

  Hi, I have a database with a table called 'links' with 600 million rows in it in SQLite. There are 2 columns in the database - a "src" column and a "dest" column. At present there are no indices. There are a fair number of common values between src and dest, but also a fair number of duplicated rows. The first thing I'm trying to do is remove all the duplicate rows, and then perform some additional processing on the results, however I've been encountering some weird issues. Firstly, SELECT * FROM links WHERE src=434923 AND dest=5010182. Now this returns one result fairly quickly and then takes quite a long time to run as I assume it's performing a tablescan on the rest of the 600m rows. However, if I do SELECT DISTINCT * FROM links, then it immediately starts returning rows really quickly. The question is: how is this possible?? Surely for each row, the row must be compared against all of the other rows in the table, but this would require a tablescan of the remaining rows in the table which SHOULD takes ages! Any ideas why SELECT DISTINCT is so much quicker than a standard SELECT?

  Read the article

• Avoiding repetition with libraries that use a setup + execute model

  - by lijie

  Some libraries offer the ability to separate setup and execution, esp if the setup portion has undesirable characteristics such as unbounded latency. If the program needs to have this reflected in its structure, then it is natural to have: void setupXXX(...); // which calls the setup stuff void doXXX(...); // which calls the execute stuff The problem with this is that the structure of setupXXX and doXXX is going to be quite similar (at least textually -- control flow will prob be more complex in doXXX). Wondering if there are any ways to avoid this. Example: Let's say we're doing signal processing: filtering with a known kernel in the frequency domain. so, setupXXX and doXXX would probably be something like... void doFilter(FilterStuff *c) { for (int i = 0; i < c->N; ++i) { doFFT(c->x[i], c->fft_forward_setup, c->tmp); doMultiplyVector(c->tmp, c->filter); doFFT(c->tmp, c->fft_inverse_setup, c->x[i]); } } void setupFilter(FilterStuff *c) { setupFFT(..., &(c->fft_forward_setup)); // assign the kernel to c->filter ... setupFFT(..., &(c->fft_inverse_setup)); }

  Read the article

• Can anyone help with this (Javascript arrays)?

  - by Rich

  Hi I am new to Netui and Javascript so go easy on me please. I have a form that is populated with container.item data retuned from a database. I am adding a checkbox beside each repeater item returned and I want to add the container item data to an array when one of the checkboxes is checked for future processing. The old code used Anchor tag to capture the data but that does not work for me. <!--netui:parameter name="lineupNo" value="{container.item.lineupIdent.lineupNo}" /> here is my checkbox that is a repeater. <netui:checkBox dataSource="{pageFlow.checkIsSelected}" onClick="checkBoxClicked()" tagId="pceChecked"/> this is my Javascript function so far but I want to a way to store the container.item.lineupIdent.lineupNo in the array. function checkBoxClicked() { var checkedPce = []; var elem = document.getElementById("PceList").elements; for (var i = 0; i < elem.length; i ++) { if (elem[i].name == netui_names.pceChecked) { if (elem[i].checked == true) { //do some code. } } } } I hope this is enough info for someone to help me. I have searched the web but could not find any examples. Thanks.

  Read the article

• Slowing process creation under Java?

  - by oconnor0

  I have a single, large heap (up to 240GB, though in the 20-40GB range for most of this phase of execution) JVM [1] running under Linux [2] on a server with 24 cores. We have tens of thousands of objects that have to be processed by an external executable & then load the data created by those executables back into the JVM. Each executable produces about half a megabyte of data (on disk) that when read right in, after the process finishes, is, of course, larger. Our first implementation was to have each executable handle only a single object. This involved the spawning of twice as many executables as we had objects (since we called a shell script that called the executable). Our CPU utilization would start off high, but not necessarily 100%, and slowly worsen. As we began measuring to see what was happening we noticed that the process creation time [3] continually slows. While starting at sub-second times it would eventually grow to take a minute or more. The actual processing done by the executable usually takes less than 10 seconds. Next we changed the executable to take a list of objects to process in an attempt to reduce the number of processes created. With batch sizes of a few hundred (~1% of our current sample size), the process creation times start out around 2 seconds & grow to around 5-6 seconds. Basically, why is it taking so long to create these processes as execution continues? [1] Oracle JDK 1.6.0_22 [2] Red Hat Enterprise Linux Advanced Platform 5.3, Linux kernel 2.6.18-194.26.1.el5 #1 SMP [3] Creation of the ProcessBuilder object, redirecting the error stream, and starting it.

  Read the article

• How to handle exceptions from an image-generating Servlet?

  - by ssahmed555

  I have a simple (Servlet, JSP, and JSTL) web app whose main functionality is displaying images retrieved from a back-end server. The controller servlet forwards the user to a JSP that in turn uses another Servlet to display the resulting image on that same JSP. Further down, the JSP has a line similar to: <a href="<c:out value='${imageURL}'/>"><img src="<c:out value='${imageURL}'/>" alt="image view" border="1"></a> which invokes a GET request on the image-generating servlet causing it to generate the image. My question is: how do I handle Exceptions thrown by this image-generating servlet? I already have an error page defined (in web.xml) to handle ServletException within my web app but this doesn't work for this image-generating Servlet, and results in the following errors showing up in my Tomcat server logs: SEVERE: Exception Processing ErrorPage[exceptionType=javax.servlet.ServletException, location=/WEB-INF/ExceptionPage.jsp] java.lang.IllegalStateException: Cannot reset buffer after response has been committed What's my recourse in this situation? I'd like to be able to handle Exceptions thrown from this image-generating Servlet, and display some error on the main UI or forward the user to another error page.

  Read the article

• question about partition

  - by davit-datuashvili

  i have question about hoare partition method here is code and also pseudo code please if something is wrong correct pseudo code HOARE-PARTITION ( A, p, r) 1 x ? A[ p] 2 i ? p-1 3 j ? r +1 4 while TRUE 5 do repeat j ? j - 1 6 until A[ j ] = x 7 do repeat i ? i + 1 8 until A[i] = x 9 if i < j 10 then exchange A[i] ? A[ j ] 11 else return j and my code public class Hoare { public static int partition(int a[],int p,int r) { int x=a[p]; int i=p-1; int j=r+1; while (true) { do { j=j-1; } while(a[j]>=x); do { i=i+1; } while(a[i]<=x); if (i<j) { int t=a[i]; a[i]=a[j]; a[j]=t; } else { return j; } } } public static void main(String[]args){ int a[]=new int[]{13,19,9,5,12,8,7,4,11,2,6,21}; partition(a,0,a.length-1); } } and mistake is this error: Class names, 'Hoare', are only accepted if annotation processing is explicitly requested 1 error any ideas

  Read the article

• Is this a bad indexing strategy for a table?

  - by llamaoo7

  The table in question is part of a database that a vendor's software uses on our network. The table contains metadata about files. The schema of the table is as follows Metadata ResultID (PK, int, not null) MappedFieldname (char(50), not null) Fieldname (PK, char(50), not null) Fieldvalue (text, null) There is a clustered index on ResultID and Fieldname. This table typically contains millions of rows (in one case, it contains 500 million). The table is populated by 24 workers running 4 threads each when data is being "processed". This results in many non-sequential inserts. Later after processing, more data is inserted into this table by some of our in-house software. The fragmentation for a given table is at least 50%. In the case of the largest table, it is at 90%. We do not have a DBA. I am aware we desperately need a DB maintenance strategy. As far as my background, I'm a college student working part time at this company. My question is this, is a clustered index the best way to go about this? Should another index be considered? Are there any good references for this type and similar ad-hoc DBA tasks?

  Read the article

• How to store and synchronize a big list of strings

  - by Joel

  I have a large database table in SQLExpress on Windows, with a particular field of interest 'code'. I have an Apache web server with MySQL on Linux. The web application on the Linux box needs access to the list of all codes. The only thing it will use the list for is checking for the existence of a given code. Having the Linux server call out to the Windows server is impractical as the Windows server is behind a NAT'ed office internet connection, and it may not always be accessible. I have set it so the Windows server will push the list of codes to the web server by means of a simple HTTP POST request. However, at this point I have not implemented the storage of the codes on the Linux box. Should I store them in a MySQL table with a single field 'code'? Then I get fast indexed lookups O(1), however I think synchronization will be an issue - given an updated list of codes, pushed from the Windows box, how would I optimally synchronize the list with the database? TRUNCATE, followed by INSERT? Should I instead store them in a flat file? Then I have O(n) look up time rather than O(1). Additionally an extra constant-time overhead too, as I will be processing the file in Ruby. However, synchronization is easy - simply replace the file.

  Read the article

• Is there a better way to detab (expand tabs) using Perl?

  - by Uri

  I wanted to detab my source files. (Please, no flame about WHY I wanted to detab my sources. That's not the point :-) I couldn't find a utility to do that. Eclipse didn't do it for me, so I implemented my own. I couldn't fit it into a one liner (-e) program. I came with the following, which did the job just fine. while( <> ) { while( /\t/ ) { s/^(([^\t]{4})*)\t/$1 /; s/^((([^\t]{4})*)[^\t]{1})\t/$1 /; s/^((([^\t]{4})*)[^\t]{2})\t/$1 /; s/^((([^\t]{4})*)[^\t]{3})\t/$1 /; } print; } However, it makes me wonder if Perl - the champion language of processing text - is the right tool. The code doesn't seem very elegant. If I had to detab source that assume tab=8 spaces, the code would look even worse. Specifically because I can think of a deterministic state machine with only 4 states to do the job. I have a feeling that a more elegant solution exists. Am I missing a Perl idiom? In the spirit of TIMTOWTDI I'm curious about the other ways to do it. u.

  Read the article

• OpenCalais API using jQuery

  - by Varun

  Hi I've wanted to do some language processing for an application and have been trying to use the OpenCalais API. The call to the API works perfectly and returns data. The problem is that even though I can see the data in the firebug, I cannot access it because the callback never triggers. Details: the call requires callback=? as it is a JSONP request. so callback=foo SHOULD call the foo method once the data is returned, it doesn't. in fact, if callback is anything other than ? the call fails and doesn't return any data. (i've also checked JSLint to make sure the returned JSON is valid). tried using $.ajax instead of $.getJSON so that I can get an error callback, but neither the success or error callbacks fire. in firebug, usually when you make a JSON request, the request shows up in the console. In this case, the request doesn't show up in the console, but instead shows in the "Net" tab in firebug...dunno what that means, but somehow the browser doesn't think its an XHR request. any ideas? thanks.

  Read the article

• recursive wget with hotlinked requisites

  - by dongle

  I often use wget to mirror very large websites. Sites that contain hotlinked content (be it images, video, css, js) pose a problem, as I seem unable to specify that I would like wget to grab page requisites that are on other hosts, without having the crawl also follow hyperlinks to other hosts. For example, let's look at this page https://dl.dropbox.com/u/11471672/wget-all-the-things.html Let's pretend that this is a large site that I would like to completely mirror, including all page requisites – including those that are hotlinked. wget -e robots=off -r -l inf -pk ^^ gets everything but the hotlinked image wget -e robots=off -r -l inf -pk -H ^^ gets everything, including hotlinked image, but goes wildly out of control, proceeding to download the entire web wget -e robots=off -r -l inf -pk -H --ignore-tags=a ^^ gets the first page, including both hotlinked and local image, does not follow the hyperlink to the site outside of scope, but obviously also does not follow the hyperlink to the next page of the site. I know that there are various other tools and methods of accomplishing this (HTTrack and Heritrix allow for the user to make a distinction between hotlinked content on other hosts vs hyperlinks to other hosts) but I'd like to see if this is possible with wget. Ideally this would not be done in post-processing, as I would like the external content, requests, and headers to be included in the WARC file I'm outputting.

  Read the article

• Show my website's content on other websites. Is iframe only option?

  - by Jashwant

  In my project, I have created a code snippet which can be copied and then put in any website. It shows my content on other websites. What I am using now is : <script type='text/javascript'> var user = 'abc'; var age = '23'; document.write('<iframe src="http://www.mysite.com/page.php?user='+ user + '&age=' + age + '" ></iframe'); </script> In page.php, I do some processing based on user and age and show dynamic content. My approach works fine. But when I look into some good standard ways to do such tasks, I find a different way. Take an example of google adsense code. <script type='text/javascript'> var a = 'somedata'; var b = 'someotherdata'; </script> <script type='text/javascript' src='http://www.google.com/adsenseurl.js'></script> I guess, since a and b are global; adsenseurl.js must be using it and may be finally they are showing it on iframe. So, now the question. What's the advantage in using google's approach and whats wrong in my approach ? p.s. I know I should try to avoid using iframes but I dont see any other way to accomplish this.

  Read the article

• Android - How to decide wether to run a Service in a separate Process?

  - by pableu

  I am working on an Android application that collects sensor data over the course of multiple hours. For that, we have a Service that collects the Sensor Data (e.g. Acceleration, GPS, ..), does some processing and stores them remotely on a server. Currently, this Service runs in a separate process (using android:service=":background" in the manifest). This complicates the communication between the Activities and the Service, but my predecessors created the Application this way because they thought that separating the Service from the Activities would make it more stable. I would like some more factual reasons for the effort of running a separate process. What are the advantages? Does it really run more stable? Is the Service less likely to be killed by the OS (to free up resources) if it's in a separate process? Our Application uses startForeground() and friends to minimize the chance of getting killed by the OS. The Android docs are not very specific about this, the mostly state that it depends on the Application's purpose ;-) TL;DR What are objective reasons to put a long-running Service in a separate process (in Android)?

  Read the article

• iphone navigation

  - by Rona

  function handleClickEvent(event) { var linkFrom = $(event.target); if (typeof linkFrom.attr("href") == 'undefined') { linkFrom = $(event.target).parent(); } var targetPage = linkFrom.attr("href"); if (linkFrom.hasClass('submit')) { handleSubmitEvent(event); // if we want to stop processing: return false; } if (linkFrom.hasClass('backbutton')) { targetPage = historyStack.pop(); if (historyStack.length == 0) { lastPage = "index.html"; } } else { historyStack.push(lastPage); } lastPage = targetPage; $(event.target).css({ 'background-color': '#194fdb', 'color': '#ffffff' }); loadingWindowON(); // Add new unique div prevPageId = "page" + pageIdCounter; pageIdCounter = parseInt(pageIdCounter) + 1 nextPageId = "page" + pageIdCounter; nextPageDiv = "<div id='" + nextPageId + "' class='nextpage' /></div>"; $("body").append(nextPageDiv); if (linkFrom.attr("target") != "_blank") { event.preventDefault(); document.getElementById(nextPageId).addEventListener('webkitAnimationEnd', function () { // remove prev div element = document.getElementById(prevPageId); if (element) { element.parentNode.removeChild(element); } // set next div as current document.getElementById(nextPageId).className = 'currentpage'; }, false); document.getElementById(nextPageId).className += ' slideleftIn'; document.getElementById(prevPageId).className += ' slideleftOut'; loadContent(targetPage, nextPageId); } I use this javascript with a twitter app I had to do and when I click a button, instead of sliding the new page from the side it adds it to the existing page at the bottom. It works fine when i open it on my computer using google chrome but when I try to open it with my iphone it doesn't work. Any ideas?

  Read the article

• Cannot translate date formats from rails form to mysql db

  - by Steve

  I have a simple search form in rails 3 that has two date fields. I'm having a problem getting these dates into my mysql db. I've tried using the american_date gem, specifying date formats in my initializers, in the config/locales/en.yml file, and directly on the date on the date fields themselves. Currently, I'm setting the rails-approved date format in the view - <%= f.text_field :depart_date, :value=> Date.today.strftime('%Y-%m-%d') %> The dateformat in my DB is also YYYY-mm-dd, so things should be going smoothly. The console tells me that the two date fields are both class = "Date" I think I've found the disconnect. From the logs - Started POST "/searches" for 127.0.0.1 at 2013-10-30 17:43:26 -0400 Processing by SearchesController#create as HTML Parameters: {"utf8"=>"v","search"=>{"depart_date"=>"2013-10-30", "return_date"=>"2013-11-09"} ?[1m?[35m (0.0ms)?[0m BEGIN ?[1m?[36mSQL (0.0ms)?[0m ?[1mINSERT INTO `searches` (`depart_date`,`return_date`) VALUES ('2013-30-10','2013-09-11')?[0m ?[1m?[35m (2.0ms)?[0m COMMIT Note that the month and day values are switched in the insert statement. How can I prevent this from happenening?

  Read the article

• .Net file writing and string splitting issues

  - by sagar

  I have a requirement where the file should be split using a given character. Default splitting options are CRLF and LF In both these cases I am splitting the line by \r\n and \r respectively. Also I have requirement where any size of file should be processed. (Processing is basically inserting the given string in a file at given position). For this I am reading the file in chunk of 1024 bytes. Then I am applying the string.Split() method. Split() method gives options for ignoring white spaces and none. I have to add back these line break characters to the line. for this I am using a binary writer and I am writing the byte array to the new file. Issue:- 1) When line break is CRLF, and the split option is NONE, while spaces are also added in the splitted array. Second option is given (to ignore white spaces) CRLF works properly. 2)Bit ignoring white space option creates other problems, as I am reading the file byte by byte I can't ignore a white space. 3)When line break characters are other than default(e.g. '|', a null value is prepended to the resulting line. Can anybody give solution to my issues?

  Read the article

• Can a pc with a 1.2 ghz dual core run VS 2013? [on hold]

  - by moo2

  Edit: This question is about a tool used for programming, Microsoft Visual Studio 2013. I already read the minimum requirements for VS 2013 before I posted or I wouldn't have asked the question. I searched on the web for an answer for a few hours before posting. Why should I go out and spend $400 on a laptop if I can spend less than $100 and use it to learn how to program? In the context of the question it is clear I was not asking for advice on what laptop to buy and it was also clear I was not asking for someone to walk me through the system requirements of VS 2013. This is a vast community and I was wondering if someone in this vast community would have experience in dealing with my question. In other words has anyone ever tried anything like it? If I had an old computer sitting around I would have tested it. At the moment all I have is a friend's Chromebook I'm borrowing. End Edit. I know the requirements for Microsoft Visual Studio 2013 state 1.6 ghz processor. I'm looking at getting a laptop for school and I found one that is old but cheap and would work for college. The Dell D430 I'm looking at getting has a 1.2ghz Core 2 Duo CPU, 80GB HD, 2GB RAM, and Windows 7 Home Premium. It's refurbished. I can get it for less than most phone's cost and from a Microsoft Authorized Refurbisher. I know it's not a skyrim rig but it's lightweight and can handle being a college laptop and doing word processing. Would Visual Studio 2013 run at all? If it is slower I'm not concerned. I just want to know if it would work and compile my assignments and run them? I'd be using this laptop for doing assignments and learning programming languages not for coding the next social media sensation.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• Macports: port install jpeg fails

  - by Philipp Keller

  History: installed MacPorts on Leopard upgraded to Snow Leopard uninstall all ports reinstalled XCode sudo port uninstall jpeg sudo port install jpeg DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. --- Computing dependencies for jpeg DEBUG: Executing org.macports.main (jpeg) DEBUG: Skipping completed org.macports.fetch (jpeg) DEBUG: Skipping completed org.macports.checksum (jpeg) DEBUG: Skipping completed org.macports.extract (jpeg) DEBUG: Skipping completed org.macports.patch (jpeg) --- Configuring jpeg DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (jpeg) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_jpeg/work/jpeg-8a" && ./configure --prefix=/opt/local' sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_jpeg/work/jpeg-8a: No such file or directory Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_jpeg/work/jpeg-8a" && ./configure --prefix=/opt/local " returned error 1 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_jpeg/work/jpeg-8a" && ./configure --prefix=/opt/local " returned error 1 while executing "$procedure $targetname" Warning: the following items did not execute (for jpeg): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see http://guide.macports.org/#project.tickets

  Read the article

• Cacti: "An internal Net-Snmp error condition detected in Cacti snmp_count"

  - by Recc

  There's the odd forum topic about an error similarly obscure as this, but I haven't seen any for snmp_count in particular. Also I don't see graphing problems, though I can't simply go and eyeball all graphs. However the poller does time out and has to be stopped by its internal process preventing overruns. If I filter out the flood of this error in the log I dont get anything else except the poller timeout: 06/12/2014 12:48:00 PM - POLLER: Poller[0] Maximum runtime of 58 seconds exceeded. Exiting. 06/12/2014 12:48:00 PM - SYSTEM STATS: Time:58.8566 Method:spine Processes:1 Threads:40 Hosts:1923 HostsPerProcess:1923 DataSources:61584 RRDsProcessed:0 06/12/2014 12:48:00 PM - SPINE: Poller[0] ERROR: Spine Timed Out While Processing Hosts Internal I saw in the running processes /usr/local/spine/spine 0 2053 that's always left behind. When I kill it the flooding of the error stops. Of course it's the same on the next poll run as it goes through the devices. 2053 is apparently the DB ID for a device. I deleted it completely to see if that stops it. It doesn't, instead 2052 is seen there. I suspect It'll be the same if I keep deleting devices which I will not do. This started happening midday when I wasn't doing anything to the cacti server. I have tried reducing Maximum Threads per Process to 1 and Number of PHP Script Servers to 1. I've been running it at 10 script servers / 40 threads for months with poll cycle time of about 20 sec. I just found out Running snmpwalk on any host would begin returning the values but then timeout halfway through. This doesn't happen from different servers on the network this Cacti is suggesting still that it's a problem with it locally. Any suggestions? For one polling cycle I changed to use cmd.php instead. then I started getting errors like CMDPHP: Poller[0] Host[45] DS[541] WARNING: Result from SNMP not valid. Partial Result: U Perhaps as expected. Looking closely I see that every snmpwalk I do is interrupted at the same place as if some byte limit is hit and the connection torn down.

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• SharePoint threw "Unknown SQL Exception 206 occured." Anyone familiar with this?

  - by dalehhirt

  Our SharePoint instance threw the following errors when attempting to access data through a Content Query Tool: 04/02/2010 10:45:06.12 w3wp.exe (0x062C) 0x1734 Windows SharePoint Services Database 5586 Critical Unknown SQL Exception 206 occured. Additional error information from SQL Server is included below. Operand type clash: uniqueidentifier is incompatible with datetime 04/02/2010 10:45:06.25 w3wp.exe (0x062C) 0x1734 Office Server Office Server General 900n Critical A runtime exception was detected. Details follow. Message: Operand type clash: uniqueidentifier is incompatible with datetime Techinal Details: System.Data.SqlClient.SqlException: Operand type clash: uniqueidentifier is incompatible with datetime at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData(... 04/02/2010 10:45:06.25* w3wp.exe (0x062C) 0x1734 Office Server Office Server General 900n Critical ...) at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlC 04/02/2010 10:45:06.25 w3wp.exe (0x062C) 0x1734 CMS Publishing 8vyd Exception (Watson Reporting Cancelled) System.Data.SqlClient.SqlException: Operand type clash: uniqueidentifier is incompatible with datetime at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteRead... 04/02/2010 10:45:06.25* w3wp.exe (0x062C) 0x1734 CMS Publishing 8vyd Exception ...er(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, ... 04/02/2010 10:45:06.25* w3wp.exe (0x062C) 0x1734 CMS Publishing 8vyd Exception ...CommandBehavior behavior) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean& bSucceed) at Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) at Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) at Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query) at Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQuery(SPSiteDataQuery query, SPWeb currentContext) at Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteData(CachedArea cachedArea, SPWeb web, SPSiteDataQuery qu... 04/02/2010 10:45:06.25* w3wp.exe (0x062C) 0x1734 CMS Publishing 8vyd Exception ...ery) 04/02/2010 10:45:06.25 w3wp.exe (0x062C) 0x1734 CMS Publishing 78ed Warning Error occured while processing a Content Query Web Part. Performing the following query ' 04/02/2010 10:45:06.25* w3wp.exe (0x062C) 0x1734 CMS Publishing 78ed Warning ...ue" Type="Number"/ The farm is MOSS 2007 with SQL Server 2005 backend. Any ideas are welcomed. Dale

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Make Dell's OpenManage 6.2 information available through SNMP

  - by tronda

  I have successfully installed OpenManage on a CentOS 5.4 server and I'm able to use OpenManage through the web interface running on port 1311, but I would like to be able to expose this information through the SNMP server. I don't know SNMP particularly well so the configuration is a result of trial and error. I've tried to follow the description pointed out in the Open Manage Server Administrator User Guide. I've followed the documentation regarding SNMP configuration, but without success. I've created a small snmpd.conf file: com2sec notConfigUser default public group notConfigGroup v1 notConfigUser group notConfigGroup v2c notConfigUser view systemview included .1.3.6.1.2.1.1 view systemview included .1.3.6.1.2.1.25.1.1 access notConfigGroup "" any noauth exact all all none view all included .1 rwcommunity public 10.200.26.50 syslocation "Somewhere" syscontact [email protected] pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat smuxpeer .1.3.6.1.4.1.674.10892.1 When I try to fetch SNMP information by using snmpwalk I get the following output: SNMPv2-MIB::sysDescr.0 = STRING: Linux myserver.test.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1180389) 3:16:43.89 SNMPv2-MIB::sysContact.0 = STRING: [email protected] SNMPv2-MIB::sysName.0 = STRING: myserver.test.com SNMPv2-MIB::sysLocation.0 = STRING: "Somewhere" SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup SNMPv2-MIB::sysORID.6 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.7 = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.8 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for managing TCP implementations SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP and ICMP implementations SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP implementations SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model for SNMP. SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management Architecture MIB. SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for Message Processing and Dispatching. SNMPv2-MIB::sysORDescr.8 = STRING: The management information definitions for the SNMP User-based Security Model. SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (0) 0:00:00.00 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (0) 0:00:00.00 I suspect that I should get some DELL specific information when I use the snmpwalk utility. Is there a configuration in snmpd.conf file which is wrong, or do I have to configure on the OpenManage side in order to get the hardware information accessible from SNMP?

  Read the article

• XenServer 6.0.2 path to installation media contains non-ascii characters

  - by cmaduro

  XenServer 6.0.2 install fails no matter what I do. I have confirmed that the md5 checksum on my ISO file is good. I tried installing from a mounted ISO file (remotely via iKVM). I tried installing from physical media. I tried installing from a bootable USB stick (using syslinux + contents of the ISO) All attempts have yielded the same result: When verifying the installation media, at 0% initializing, the following is reported: "Some packages appeared to be damaged." followed by a list of pretty much all the gz2 and rpm packages. If I skip the media verification the installer proceeds and then gives me an error when it reaches "Installing from base pack" at 0% which states "An unrecoverable error has occurred. The error was: 'ascii' codec can't decode byte 0xff in position 20710: ordinal not in range(128) Please refer to your user guide, or contact a Technical Support Representative, for further details" there is one option left which is to reboot. Apparently at some point during the processing of the repositories on the installation media non-ascii characters are found, which causes the installer to quit. How do I fix this? Here are my specs TYAN S8236 motherboard 2 AMD Opteron 6234 processors LSI2008 card connected to 2 1TB Seagate Constellation drives SATA, 1 500GB Corsair m4 SSD SATA and 1 Corsair Forse 3 - 64GB SSD SATA Onboard SATA connected to a slim DVD-+RW. Onboard SAS connected to 2 IBM ESX 70GB 10K SAS drives (for XenServer) 256GB memory ================================================================================= Comments: According to pylonsbook.com "chances are you have run into a problem with character sets, encodings, and Unicode" – cmaduro 10 hours ago A clue is provided by "vmware.com/support/vsphere5/doc/…; Data migration fails if the path to the vCenter Server installation media contains non-ASCII characters When this problem occurs, an error message similar to: 'ascii' codec can't decode byte 0xd0 in position 30: ordinal not in range(128) appears, and the installer quits unexpectedly during the data migration process. – cmaduro 10 hours ago This is an error that python throws. And guess what, the .py extention of the file you have to edit in this link community.spiceworks.com/how_to/show/1168 means the installer is written in python. Python is interpreted, so now to find the install file responsible for this error. – cmaduro 6 hours ago The file that generates the error upon verification is /opt/xensource/installer/tui/repo.py. The error message appears around line 359. – cmaduro 2 hours ago I am fairly sure that the install error is generated somewhere in repository.py as the backend.py file throws errors while methods in that file are being called. Perhaps all errors can be traced back to this file. – cmaduro 1 hour ago

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >