Search Results

Search found 7902 results on 317 pages for 'structure'.

Page 251/317 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

  • actionscript-3: refactor interface inheritance to get rid of ambiguous reference error

    - by maxmc
    hi! imagine there are two interfaces arranged via composite pattern, one of them has a dispose method among other methods: interface IComponent extends ILeaf { ... function dispose() : void; } interface ILeaf { ... } some implementations have some more things in common (say an id) so there are two more interfaces: interface ICommonLeaf extends ILeaf { function get id() : String; } interface ICommonComponent extends ICommonLeaf, IComponent { } so far so good. but there is another interface which also has a dispose method: interface ISomething { ... function dispose() : void; } and ISomething is inherited by ICommonLeaf: interface ICommonLeaf extends ILeaf, ISomething { function get id() : String; } As soon as the dispose method is invoked on an instance which implements the ICommonComponent interface, the compiler fails with an ambiguous reference error because ISomething has a method called dispose and ILeaf also has a dispose method, both living in different interfaces (IComponent, ISomething) within the inheritace tree of ICommonComponent. I wonder how to deal with the situation if the IComponent, the ILeaf and the ISomething can't change. the composite structure must also work for for the ICommonLeaf & ICommonComponent implementations and the ICommonLeaf & ICommonComponent must conform to the ISomething type. this might be an actionscript-3 specific issue. i haven't tested how other languages (for instance java) handle stuff like this.

    Read the article

  • Updating a local sqlite db that is used for local metadata & caching from an service?

    - by Pharaun
    I've searched through the site and haven't found a question/answer that quite answer my question, the closest one I found was: Syncing objects between two disparate systems best approach. Anyway to begun, because there is no RSS feeds available, I'm screen scrapping a webpage, hence it does a fetch then it goes through the webpage to scrap out all of the information that I'm interested in and dumps that information into a sqlite database so that I can query the information at my leisure without doing repeat fetching from the website. However I'm also storing various metadata on the data itself that is stored in the sqlite db, such as: have I looked at the data, is the data new/old, bookmark to a chunk of data (Think of it as a collection of unrelated data, and the bookmark is just a pointer to where I am in processing/reading of the said data). So right now my current problem is trying to figure out how to update the local sqlite database with new data and/or changed data from the website in a manner that is effective and straightforward. Here's my current idea: Download the page itself Create a temporary table for the parsed data to go into Do a comparison between the official and the temporary table and copy updates and/or new information to the official table This process seems kind of complicated because I would have to figure out how to determine if the data in the temporary table is new, updated, or unchanged. So I am wondering if there isn't a better approach or if anyone has any suggestion on how to architecture/structure such system?

    Read the article

  • Is there a standard for storing normalized phone numbers in a database?

    - by Eric Z Beard
    What is a good data structure for storing phone numbers in database fields? I'm looking for something that is flexible enough to handle international numbers, and also something that allows the various parts of the number to be queried efficiently. [Edit] Just to clarify the use case here: I currently store numbers in a single varchar field, and I leave them just as the customer entered them. Then, when the number is needed by code, I normalize it. The problem is that if I want to query a few million rows to find matching phone numbers, it involves a function, like where dbo.f_normalizenum(num1) = dbo.f_normalizenum(num2) which is terribly inefficient. Also queries that are looking for things like the area code become extremely tricky when it's just a single varchar field. [Edit] People have made lots of good suggestions here, thanks! As an update, here is what I'm doing now: I still store numbers exactly as they were entered, in a varchar field, but instead of normalizing things at query time, I have a trigger that does all that work as records are inserted or updated. So I have ints or bigints for any parts that I need to query, and those fields are indexed to make queries run faster.

    Read the article

  • XSLT 1.0 : Iterate over characters in a string

    - by subtenante
    I need to iterate over the characters in a string to build an XML structure. Currently, I am doing this : <xsl:template name="verticalize"> <xsl:param name="text">Some text</xsl:param> <xsl:for-each select="tokenize(replace(replace($text,'(.)','$1\\n'),'\\n$',''),'\\n')"> <xsl:element name="para"> <xsl:value-of select="."/> </xsl:element> </xsl:for-each> </xsl:template> This produces something like : <para>S</para> <para>o</para> <para>m</para> <para>e</para> <para> </para> <para>t</para> <para>e</para> <para>x</para> <para>t</para> This works fine with Xpath 2.0. But I need to apply the same treatment in a XPath 1.0 environment, where the replace() method is not available. Do you know a way to achieve this ?

    Read the article

  • Center aligned form with equal width labels

    - by James Goodwin
    I have a very simple web form which consists of labels and input fields, however I can not seem to find a way of aligning the form in the center of the page and for the labels to have an equal width so that they appear neatly next to each other, one under the other. The structure of my page is basically: <body> <div class="form"> <form method="post"> <fieldset> <label>Mobile:</label><input type="text" name="msisdn"><br/> <label>Code:</label><input type="text" name="code"><br/> <br/> <input type="image" src="submit-button.gif" alt="Submit"> <br/> <input type="checkbox" name="ts_and_cs"><label> Accept Terms and Conditions</label> <br/><br/> </fieldset> </form> </div> </body> Usually I would fix this by doing float:left on the label fields and setting a width on the labels, however for this I need the labels and input fields to be centered on the page. Also I am not able to set the width of the page (or any containing divs) as the page will be displayed on mobile devices with different screen sizes. Any suggestions as to how best style the form? Thanks

    Read the article

  • (HARD)Remove accents from a JSON response using the raw content

    - by Pentium10
    This is a follow up of this question: Remove accents from a JSON response. The accepted answer there works for a single item/string of a raw JSON content. But I would like to run a full transformation over the entire raw content of the JSON without parsing each object/array/item. What I've tried is this function removeAccents($jsoncontent) { $obj=json_decode($jsoncontent); // use decode to transform the unicode chars to utf $content=serialize($obj); // serialize into string, so the whole obj structure can be used string as a whole $a = 'ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõöøùúûýýþÿRr'; $b = 'aaaaaaaceeeeiiiidnoooooouuuuybsaaaaaaaceeeeiiiidnoooooouuuyybyRr'; $content=utf8_decode($content); $jsoncontent = strtr($content, $a, $b); // at this point the accents are removed, and everything is good echo $jsoncontent; $obj=unserialize($jsoncontent); // this unserialization is returning false, probably because we messed up with the serialized string return json_encode($obj); } As you see after I decoded JSON content, I serialized the object to have a string of it, than I remove the accents from that string, but this way I have problem building back the object, as the unserialize stuff returns false. How can I fix this?

    Read the article

  • Have no idea with python-excel read data file

    - by Protoss Reed
    I am a student and haven't a big expirence to do this work. So problem is next. I have a part of code: import matplotlib.pyplot as plt from pylab import * import cmath def sf(prompt): """ """ error_message = "Value must be integer and greater or equal than zero" while True: val = raw_input(prompt) try: val = float(val) except ValueError: print(error_message) continue if val <= 0: print(error_message) continue return val def petrogen_elements(): """Input and calculations the main parameters for pertogen elements""" print "Please enter Petrogen elements: \r" SiO2 = sf("SiO2: ") Al2O3= sf("Al2O3: ") Na2O = sf("Na2O: ") K2O = sf("K2O: ") petro = [SiO2,TiO2,Al2O3,] Sum = sum(petro) Alcal = Na2O + K2O TypeA lcal= Na2O / K2O Ka= (Na2O + K2O)/ Al2O3 print '-'*20, "\r Alcal: %s \r TypeAlcal: %s \ \r Ka: %s \r" % (Alcal, TypeAlcal,Ka,) petrogen_elements() So the problem is next. I have to load and read excel file and read all data in it. After that program have to calculate for example Alcaline, Type of Alcaline etc. Excel file has only this structure 1 2 3 4 5   1 name1 SiO2 Al2O3 Na2O K2O 2 32 12 0.21 0.1 3 name2 SiO2 Al2O3 Na2O K2O 4 45 8 7.54 5 5 name3 SiO2 Al2O3 Na2O K2O 6. … …. …. … … … All excel file has only 5 columns and unlimited rows. User has choice input data or import excel file. First part of work I have done but it stays a big part Finally I need to read all file and calculate the values. I would be so grateful for some advice

    Read the article

  • URL rewriting to a common end point

    - by sunil
    I want to create an asp.net white-label site http://whitelabel.com, that could be styled for each of our clients according to their specific needs. So for example, client abc would see the site in their corporate colours and be accessed through their specific url http://abc.com. Likewise client xyz would see the site in their own styling and url http://xyz.com. Typing either url, in effect, takes the user to http://whitelabel.com where the styling is applied, and the client's url structure is retained. I was thinking of URL rewriting using URLRewriter.Net (http://urlrewriter.net/), or similar, mapping the incoming address to a client id and applying the theme accordingly. So, a url rewrite rule may be something like <rewrite url="http//abc.com/(.+)" to="~/$1?id=1" /> <rewrite url="http//xyz.com/(.+)" to="~/$1?id=2" /> I could then read the id, map it to the client, and with a bit of jiggery-pokery, apply the correct theme. I was wondering if: this is the right approach ? I've overlooked something ? there is a better way to do this ? Any suggestions would be appreciated.

    Read the article

  • Performing calculations by subsets of data in R

    - by Vivi
    I want to perform calculations for each company number in the column PERMNO of my data frame, the summary of which can be seen here: > summary(companydataRETS) PERMNO RET Min. :10000 Min. :-0.971698 1st Qu.:32716 1st Qu.:-0.011905 Median :61735 Median : 0.000000 Mean :56788 Mean : 0.000799 3rd Qu.:80280 3rd Qu.: 0.010989 Max. :93436 Max. :19.000000 My solution so far was to create a variable with all possible company numbers compns <- companydataRETS[!duplicated(companydataRETS[,"PERMNO"]),"PERMNO"] And then use a foreach loop using parallel computing which calls my function get.rho() which in turn perform the desired calculations rhos <- foreach (i=1:length(compns), .combine=rbind) %dopar% get.rho(subset(companydataRETS[,"RET"],companydataRETS$PERMNO == compns[i])) I tested it for a subset of my data and it all works. The problem is that I have 72 million observations, and even after leaving the computer working overnight, it still didn't finish. I am new in R, so I imagine my code structure can be improved upon and there is a better (quicker, less computationally intensive) way to perform this same task (perhaps using apply or with, both of which I don't understand). Any suggestions?

    Read the article

  • Rolling back file moves, folder deletes and mysql queries

    - by Workoholic
    This has been bugging me all day and there is no end in sight. When the user of my php application adds a new update and something goes wrong, I need to be able to undo a complex batch of mixed commands. They can be mysql update and insert queries, file deletes and folder renaming and creations. I can track the status of all insert commands and undo them if an error is thrown. But how do I do this with the update statements? Is there a smart way (some design pattern?) to keep track of such changes both in the file structure and the database? My database tables are MyISAM. It would be easy to just convert everything to InnoDB, so that I can use transactions. That way I would only have to deal with the file and folder operations. Unfortunately, I cannot assume that all clients have InnoDB support. It would also require me to convert many tables in my database to InnoDB, which I am hesitant to do.

    Read the article

  • Hibernate Bi- Directional many to many mapping advice!

    - by Rob
    hi all, i woundered if anyone might be able to help me out. I am trying to work out what to google for (or any other ideas!!) basically i have a bidirectional many to many mapping between a user entity and a club entity (via a join table called userClubs) I now want to include a column in userClubs that represents the role so that when i call user.getClubs() I can also work out what level access they have. Is there a clever way to do this using hibernate or do i need to rethink the database structure? Thank you for any help (or just for reading this far!!) the user.hbm.xml looks a bit like <set name="clubs" table="userClubs" cascade="save-update"> <key column="user_ID"/> <many-to-many column="activity_ID" class="com.ActivityGB.client.domain.Activity"/> </set> the activity.hbm.xml part <set name="members" inverse="true" table="userClubs" cascade="save-update"> <key column="activity_ID"/> <many-to-many column="user_ID" class="com.ActivityGB.client.domain.User"/> </set> The current userClubs table contains the fields id | user_ID | activity_ID I would like to include in there id | user_ID | activity_ID | role and be able to access the role on both sides...

    Read the article

  • Google Maps in Drupal: reference to gmap object from JavaScript

    - by user280817
    Is there a way to obtain JavaScript references to the Google maps that are embedded into Drupal pages by the GMap module? I want to be able to manipulate the maps in these pages. I want to pan and zoom them. But I cannot find a reference to an embedded map object. I've dissected the relevant JavaScript objects Drupal.gmap and Drupal.settings.gmap with no success--unless I've overlooked something. The Drupal GMap module doesn't seem to explicitly provide references (within its API) to the GMap objects that it embeds into pages. It just generates themed text which is interpolated into the page. The technique of passing the HTML ID of the map container to either the GMap2 object constructor or the similar Drupal.gmap.getMap() function in order to obtain a map reference doesn't appear to work: Both simply return an instance to a new map, one having the same dimensions and basic characteristics of the original map, but apparently sans all of its overlays (which could contain markers). And I have to call setCenter() on it before I can use it, which initializes the structure, so I know it has no overlays.

    Read the article

  • Select multiple records from sql database table in a master-detail scenario

    - by Trex
    Hello, I have two tables in a master-detail relationship. The structure is more or less as follows: Master table: MasterID, DetailID, date, ... masterID1, detailID1, 2010/5/1, .... masterID2, detailID1, 2008/6/14, ... masterID3, detailID1, 2009/5/25, ... masterID4, detailID2, 2008/7/24, ... masterID5, detailID2, 2010/4/1, ... masterID6, detailID4, 2008/9/16, ... Details table: DetailID, ... detailID1, ... detailID2, ... detailID3, ... detailID4, ... I need to get all the records from the details table plus the LAST record from the master table (last by the date in the master table). Like this: detailID1, masterID1, 2010/5/1, .... detailID2, masterID5, 2010/4/1, ... detailID3, null, null, ... detailID4, masterID6, 2008/9/16, ... I have no idea how to do this. Can anybody help me? Thanks a lot. Jan

    Read the article

  • Minimal deployment of couchdb on windows

    - by MartinStettner
    Hi, I'd like to use couchdb for a client-only application on Windows (the document-oriented structure and the synchronization features would be perfect for me). There is a Windows installer package here, but the installer itself has about 45 MB, when installed it takes more than 100 MB on my HD. This is far to much for my (relatively small) application. I noticed that there are a lot of "src" directories in the couchdb/lib subdirs. I've been experimenting with removing some of them and it didn't seem to break the system. Now I'm wondering what would be the "minimal" set of files (preferably binary-only) that would be needed in order to run a local couchdb server. Are there already any efforts to create such a deployment-friendly installer? Or could anyone give some (even very general) hints how to create it? How much disk space would be minimally required for such an installation? Needless to say that I'm not at all familiar with neither the couchdb internals nor the Erlang system :). But perhaps I could figure out if I got some direction (or I could stop trying if someone told me that this would be impossible or didn't make sense at all ...) Thanks anyway!

    Read the article

  • ConcurrentLinkedQueue$Node remains in heap after remove()

    - by action8
    I have a multithreaded app writing and reading a ConcurrentLinkedQueue, which is conceptually used to back entries in a list/table. I originally used a ConcurrentHashMap for this, which worked well. A new requirement required tracking the order entries came in, so they could be removed in oldest first order, depending on some conditions. ConcurrentLinkedQueue appeared to be a good choice, and functionally it works well. A configurable amount of entries are held in memory, and when a new entry is offered when the limit is reached, the queue is searched in oldest-first order for one that can be removed. Certain entries are not to be removed by the system and wait for client interaction. What appears to be happening is I have an entry at the front of the queue that occurred, say 100K entries ago. The queue appears to have the limited number of configured entries (size() == 100), but when profiling, I found that there were ~100K ConcurrentLinkedQueue$Node objects in memory. This appears to be by design, just glancing at the source for ConcurrentLinkedQueue, a remove merely removes the reference to the object being stored but leaves the linked list in place for iteration. Finally my question: Is there a "better" lazy way to handle a collection of this nature? I love the speed of the ConcurrentLinkedQueue, I just cant afford the unbounded leak that appears to be possible in this case. If not, it seems like I'd have to create a second structure to track order and may have the same issues, plus a synchronization concern.

    Read the article

  • How can I work around WinXP using ports 1025-5000 as ephemeral?

    - by Chris Dolan
    If you create a TCP client socket with port 0 instead of a non-zero port, then the operating system chooses any free ephemeral port for you. Most OSes choose ephemeral ports from the IANA dynamic port range of 49152-65535. However in Windows Server 2003 and earlier (including XP) Microsoft used ports 1025-5000 as the ephemeral range, according to their bind() documentation. I run multiple Java services on the same hardware. On rare occasions, this range collides with well-known ports that I use for other services (e.g. port 4160 for Jini discovery). While rare, this has caused real problems. Is there any easy way to tell Windows or Java to use a different port range for client sockets? Microsoft's docs indicate that I can change the high end of that range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. Update: I've made some progress on this. It looks like Microsoft has a concept of reserved ports that are exceptions to the ephemeral port range. There's a registry setting that lets you change this permanently and apparently there must be an API to do the same thing because there's a data structure that holds high/low values for reserved port ranges, but I can't find the actual function call anywhere... The registry solution may work, but now I'm fixated on this API.

    Read the article

  • Using Sphinx with a distutils-built C extension

    - by detly
    I have written a Python module including a submodule written in C: the module itself is called foo and the C part is foo._bar. The structure looks like: src/ foo/__init__.py <- contains the public stuff foo/_bar/bar.c <- the C extension doc/ <- Sphinx configuration conf.py ... foo/__init__.py imports _bar to augment it, and the useful stuff is exposed in the foo module. This works fine when it's built, but obviously won't work in uncompiled form, since _bar doesn't exist until it's built. I'd like to use Sphinx to document the project, and use the autodoc extension on the foo module. This means I need to build the project before I can build the documentation. Since I build with distutils, the built module ends up in some variably named dir build/lib.linux-ARCH-PYVERSION — which means I can't just hard-code the directory into a Sphinx' conf.py. So how do I configure my distutils setup.py script to run the Sphinx builder over the built module? For completeness, here's the call to setup (the 'fake' things are custom builders that subclass build and build_ext): setup(cmdclass = { 'fake': fake, 'build_ext_fake' : build_ext_fake }, package_dir = {'': 'src'}, packages = ['foo'], name = 'foo', version = '0.1', description = desc, ext_modules = [module_real])

    Read the article

  • private class calling a method from its outer class

    - by oxinabox.ucc.asn.au
    Ok, so I have a class for a "Advanced Data Structure" (in this case a kinda tree) SO I implimented a Iterator as a private class with in it. So the iterator needs to implement a remove function to remove the last retuirned element. now my ADT already impliments a remove function, and in this case there is very little (thinking about it, i think nothing) to be gain by implimenting a different remove function for the iterator. so how do I go about calling the remove from my ADT sketch of my struture: public class ADT { ... private class ADT_Iterator impliments java.util.Itorator{ ... public void remove(){ //where I want to call the ADT's remove function from } ... public void remove( Object paramFoo ) { ... } ... } So just calling remove(FooInstance) won't work (will it?) and this.remove(FooInstance) is the same thing. what do i call? (and changign the name of the ADT's remove function is not an option, as that AD T has to meet an Interace wich I am note at liberty to change) I could make both of them call a removeHelper functon, I guess...

    Read the article

  • XDocument.Parse fails due to resolution error, how to disable resolution

    - by Frank Krueger
    I am trying to parse the contents of http://feeds.feedburner.com/riabiz using XDocument.Parse(string) (because it gets cached in a DB.) However, it keeps failing with the below stack trace when it tries to resolve some URIs in that XML. I don't care about validation or any of that XML nonsense, I just want the structure parsed. How can I use XDocument without this URI resolution? System.ArgumentException: The specified path is not of a legal form (empty). at System.IO.Path.InsecureGetFullPath (System.String path) [0x00000] in :0 at System.IO.Path.GetFullPath (System.String path) [0x00000] in :0 at System.Xml.XmlResolver.ResolveUri (System.Uri baseUri, System.String relativeUri) [0x00000] in :0 at System.Xml.XmlUrlResolver.ResolveUri (System.Uri baseUri, System.String relativeUri) [0x00000] in :0 at Mono.Xml2.XmlTextReader.ReadStartTag () [0x00000] in :0 at Mono.Xml2.XmlTextReader.ReadContent () [0x00000] in :0 at Mono.Xml2.XmlTextReader.Read () [0x00000] in :0 at System.Xml.XmlTextReader.Read () [0x00000] in :0 at Mono.Xml.XmlFilterReader.Read () [0x00000] in :0 at Mono.Xml.XmlFilterReader.Read () [0x00000] in :0 at System.Xml.XmlReader.ReadEndElement () [0x00000] in :0 at System.Xml.Linq.XElement.LoadCore (System.Xml.XmlReader r, LoadOptions options) [0x00000] in :0 at System.Xml.Linq.XNode.ReadFrom (System.Xml.XmlReader r, LoadOptions options) [0x00000] in :0 ...

    Read the article

  • Python: circular imports needed for type checking

    - by phild
    First of all: I do know that there are already many questions and answers to the topic of the circular imports. The answer is more or less: "Design your Module/Class structure properly and you will not need circular imports". That is true. I tried very hard to make a proper design for my current project, I in my opinion I was successful with this. But my specific problem is the following: I need a type check in a module that is already imported by the module containing the class to check against. But this throws an import error. Like so: foo.py: from bar import Bar class Foo(object): def __init__(self): self.__bar = Bar(self) bar.py: from foo import Foo class Bar(object): def __init__(self, arg_instance_of_foo): if not isinstance(arg_instance_of_foo, Foo): raise TypeError() Solution 1: If I modified it to check the type by a string comparison, it will work. But I dont really like this solution (string comparsion is rather expensive for a simple type check, and could get a problem when it comes to refactoring). bar_modified.py: from foo import Foo class Bar(object): def __init__(self, arg_instance_of_foo): if not arg_instance_of_foo.__class__.__name__ == "Foo": raise TypeError() Solution 2: I could also pack the two classes into one module. But my project has lots of different classes like the "Bar" example, and I want to seperate them into different module files. After my own 2 solutions are no option for me: Has anyone a nicer solution for this problem?

    Read the article

  • Best strategy for synching data in iPhone app

    - by iamj4de
    I am working on a regular iPhone app which pulls data from a server (XML, JSON, etc...), and I'm wondering what is the best way to implement synching data. Criteria are speed (less network data exchange), robustness (data recovery in case update fails), offline access and flexibility (adaptable when the structure of the database changes slightly, like a new column). I know it varies from app to app, but can you guys share some of your strategy/experience? For me, I'm thinking of something like this: 1) Store Last Modified Date in iPhone 2) Upon launching, send a message like getNewData.php?lastModifiedDate=... 3) Server will process and send back only modified data from last time. 4) This data is formatted as so: <+><data id="..."></data></+> // add this to SQLite/CoreData <-><data id="..."></data></-> // remove this <%><data id="..."><attribute>newValue</attribute></data></%> // new modified value I don't want to make <+, <-, <%... for each attribute as well, because it would be too complicated, so probably when receive a <% field, I would just remove the data with the specified id and then add it again (assuming id here is not some automatically auto-incremented field). 5) Once everything is downloaded and updated, I will update the Last Modified Date field. The main problem with this strategy is: If the network goes down when I am updating something = the Last Modified Date is not yet updated = next time I relaunch the app, I will have to go through the same thing again. Not to mention potential inconsistent data. If I use a temporary table for update and make the whole thing atomic, it would work, but then again, if the update is too long (lots of data change), the user has to wait a long time until new data is available. Should I use Last-Modified-Date for each of the data field and update data gradually?

    Read the article

  • Groovy / Scala / Java under the hood

    - by Jack
    I used Java for like 6-7 years, then some months ago I discovered Groovy and started to save a lot of typing.. then I wondered how certain things worked under the hood (because groovy performance is really poor) and understood that to give you dynamic typing every Groovy object is a MetaClass object that handles all the things that the JVM couldn't handle by itself. Of course this introduces a layer in the middle between what you write and what you execute that slows down everything. Then somedays ago I started getting some infos about Scala. How these two languages compare in their byte code translations? How much things they add to the normal structure that it would be obtained by plain Java code? I mean, Scala is static typed so wrapper of Java classes should be lighter, since many things are checked during compile time but I'm not sure about the real differences of what's going inside. (I'm not talking about the functional aspect of Scala compared to the other ones, that's a different thing) Can someone enlighten me? From WizardOfOdds it seems like that the only way to get less typing and same performance would be to write an intermediate translator that translates something in Java code (letting javac compile it) without alterating how things are executed, just adding synctatic sugar withour caring about other fallbacks of the language itself.

    Read the article

  • Avoiding Multiple Dialog Calls with htaccess

    - by Jeffrey J Weimer
    OK, I'm new to this, so pardon if the question is already a FAQ. Searching multiple places still leaves me dumbfounded. I have a Web site generated with iWeb09/Mac hosting on an ISP. To secure certain pages, I am trying to set up .htaccess + .htpasswd files. The basic directory structure is ... Main index.html Images.html Images (some css, js stuff) Media Image01 Image01.jpeg ... Image02 Image02.jpeg ... I want to password protect access to the Images directory and all the files therein. The index.html file has a link to the Images.html file that contains the layout for the files in the Images directory. I have put a basic .htaccess file at the Main level that restricts access via ... <Files "Images.html"> AuthType Basic AuthName "Images" AuthUserFile /Main/.htpasswd AuthGroupFile /dev/null Require valid-user </Files> I have then created a valid .htpasswd file. All works at the start, however after the first call to set up the Images.html page, the secure login prompt is displayed multiple times, presumably once for every sub-sub-directory Images/Media/ImageXX (with multiple sub-directories, I just give up after two or three times). I have also tried placing the .htaccess file inside the Images directory with the same problem. Recommendations I have seen suggest a better convention is needed in the basic .htaccess file itself. Alternatively, perhaps a companion .htaccess is needed in the Images directory. So, how do I fix this problem? -- JJW

    Read the article

  • find the children in jquery

    - by armin etemadi
    i have a tree structure,there is an unordered list(ul) in that tree.i have li items in it,and in that li items it could be a span or an ul list. this is one part of my codes : <li id="main_li"> <div class="first_division"></div> <span>products</span> <ul style="display: block;"> <li> <div class="division1"></div> <span>products_cat_1</span> <ul style="display: none;"> <li> <span>products_cat_1_milk</span> </li> </ul> </li> <li> <span>products_yoghurt</span> </li> <li> <span>products_butter</span> </li> </ul> </li> i want to access li elements in ul tag where the parent li id is "main_li",i want to get it done by clicking on the span within li. how can i do this with jquery?

    Read the article

  • Designing a general database interface in PHP

    - by lamas
    I'm creating a small framework for my web projects in PHP so I don't have to do the basic work over and over again for every new website. It is not my goal to create a second CakePHP or Codeigniter and I'm also not planning to build my websites with any of the available frameworks as I prefer to use things I've created myself in general. I have no problems in designing that framework when it comes to parts like the core structure, request handling, and so on but I'm getting stuck with designing the database interface for my modules. I've already thought about using the MVC pattern but thought that it would be a bit of a overkill. So the exact problem I'm facing is how my frameworks modules (viewCustomers could be a module, for example) should interact with the database. Is it a good idea to write SQL directly in PHP (mysql_query( 'SELECT firstname, lastname(.....))? How could I abstract a query like SELECT firstname, lastname FROM customers WHERE id=X Would MySQL helper functions like $this->db->get( array('firstname', 'lastname'), array('id'=>X) ) be a good idea? I suppose not because they actually make everything more complicated by requiring arrays to be created and passed. Is the Model pattern from MVC my only real option?

    Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >