Search Results

Search found 18288 results on 732 pages for 'device context'.

Page 252/732 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Introducing Code Map for Visual Studio 2012 September CTP

  - by krislankford

  As part of the Visual Studio 2012 CTP for September, Visual Studio got a little sexier at helping you discover and visualize your code. The introduction of the Code Map feature helps compliment the variety of other tools that are included with Visual Studio to help you analyze and visualize your projects and solutions. Code Map leverages the dgml format within Visual Studio that is currently used b the Architecture and Modeling tools. This is a nice addition that gets us from point A to point B a little faster. The great thing about Code Map is that you can gain access to the functionality from directly within your code from the context menu. This Code Map functionality is also context specific based on your cursor. You can evaluate and add items such as methods and variables directly to the Code Map window. As you add items the Code Map surface is updated to show your new item plus any relationships and dependencies that have been introduced in your code. Something that is also very nice is that the Code Map surface is interactive and allows you to use the F12 button (Go To Definition) which can help you navigate your code especially is you are adding items that span multiple files or projects. To get started all you have to do is go out and download the September CTP for Visual Studio 2012 located here. Happy Coding!   Code Map Window

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by kss

  sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Oracle Virtual Desktop Client with USB smart card reader

  - by wim.coekaerts

  I have my Sun Ray thin client at home which I use religiously, I use a Sun Ray 3i at work as my main desktop and just always take my smart card home and happily continue with the hot desking feature. We released a software version of the Sun Ray client called Oracle Virtual Desktop Client (OVDC). There is a version for Windows, Linux and Mac OS X. I have a minimac at home and I installed OVDC on it, which of course works great but since I like to re-connect to my session that I use at work, I wanted to try out the external usb smart card reader feature. I ordered a cute, low cost device online and tried it out. As expected, it worked out of the box without -any- configuration. I took the device, plugged it into my minimac, started OVDC, plugged in my smartcard and I got the password screen (screensaver) to get into my sun ray session on my server at work. Nothing new here, this is a feature that's been in the product but I had never tried it before and it works out of the box and is super easy and I just felt like sharing :-) Here are a few pictures : (1) login screen (2) smart cardreader without card (3) password screen (4) smart card reader with card

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Issues in pulse audio in Ubuntu 11.10

  - by Kamal

  Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

  Read the article

• Hibernation to a swap file 12.04, fragfile output

  - by MrHug10

  I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• How does datomic handle "corrections"?

  - by blueberryfields

  tl;dr Rich Hickey describes datomic as a system which implicitly deals with timestamps associated with data storage from my experience, data is often imperfectly stored in systems, and on many occasions needs to retroactively be corrected (ie, often the question of "was a True on Tuesday at 12:00pm?" will have an incorrect answer stored in the database) This seems like a spot where the abstractions behind datomic might break - do they? If they don't, how does the system handle such corrections? Rich Hickey, in several of his talks, justifies the creation of datomic, and explains its benefits. His work, if I understand correctly, is motivated by core the insight that humans, when speaking about data and facts, implicitly associate some of the related context into their work(a date-time). By pushing the work required to manage the implicit date-time component of context into the database, he's created a system which is both much easier to understand, and much easier to program. This turns out to be relevant to most database programmers in practice - his work saves everyone a lot of time managing complex, hard to produce/debug/fix, time queries. However, especially in large databases, data is often damaged/incorrect (maybe it was not input correctly, maybe it eroded over time, etc...). While most database updates are insertions of new facts, and should indeed be treated that way, a non-trivial subset of the work required to manage time-queries has to do with retroactive updates. I have yet to see any documentation which explains how such corrections, or retroactive updates, are handled by datomic; from my experience, they are a non-trivial (and incredibly difficult to deal with) subset of time-related data manipulation that database programmers are faced with. Does datomic gracefully handle such updates? If so, how?

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• How to mount drive in /media/userName/ like nautilus do using udisks

  - by Bsienn

  As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

  Read the article

• Why is rvalue write in shared memory array serialised?

  - by CJM

  I'm using CUDA 4.0 on a GPU with computing capability 2.1. One of my device functions is the following: device void test(int n, int* itemp) // itemp is shared memory pointer { const int tid = threadIdx.x; const int bdim = blockDim.x; int i, j, k; bool flag = 0; itemp[tid] = 0; for(i=tid; i<n; i+=bdim) { // { code that produces some values of "flag" } } itemp[tid] = flag; } Each thread is checking some conditions and producing a 0/1 flag. Then each thread is writing flag at the tid-th location of a shared int array. The write statement "itemp[tid] = flag;" gets serialized -- though "itemp[tid] = 0;" is not. This is causing huge performance lag which technically should not be there -- I want to avoid it. Please help.

  Read the article

• A fix for the design time error in MVVM Light V4.1

  - by Laurent Bugnion

  For those of you who installed V4.1 of MVVM Light and created a project for Windows Phone 8, you will have noticed an error showing up in the design surface (either in Visual Studio designer, or in Expression Blend). The error says: “Could not load type ‘System.ComponentModel.INotifyPropertyChanging’ from assembly ‘mscorlib.extensions’” with additional information about version numbers. The error is caused by an incompatibility between versions of System.Windows.Interactivity. Because this assembly is strongly named, any version incompatibility is causing the kind of error shown here (for an interesting discussion on the strong naming issue, see this thread on Codeplex). I managed to resolve the issue for Windows Phone 8 and will publish a cleaned up installer next week. In the mean time, in order to allow you to continue development, please follow the steps: Download the new DLLs zip package (MVVMLight_V4_1_25_WP8). Right click on the Zip file and select Properties from the context menu. Press the “Unblock” button (if available) and then OK. Right click again on the zip package and select “Extract all…”. Select a known location for the new DLLs. Open the MVVM Light project with the design time error in Visual Studio 2012. Open the References folder in the Solution Explorer. Select the following DLLs: GalaSoft.MvvmLight.dll, GalaSoft.MvvmLight.Extras.dll, Microsoft.Practices.ServiceLocation.dll and System.Windows.Interactivity.dll. Press “delete” and confirm to remove the DLLs from your project. Right click on References and select Add Reference from the context menu. Browse to the folder with the new DLLs. Select the four new DLLs and press OK. Rebuild your application, and open it again in Blend or in the Visual Studio designer. The error should be gone now. In the next few days, as time allows, I will publish a new MSI containing a fixed version of the DLLs as well as a few other improvements. This quick fix should however allow you to continue working on your Windows Phone 8 projects in design mode too.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Music Manager that can properly see ID3 ratings tags and synchronize with Android

  - by Sebastian

  I'm moving from Windows 7 to Ubuntu, and so far the experience has been a really good one :) However, there is something that I've used to do with Windows 7 that I can't find how to do in Ubuntu: From my Windows music manager programs (either MediaMonkey or Windows Media Player) I could set song ratings in a way that the ratings set from either program could be also read from the other one. Additionally, song ratings were visible and updated in my iPod Touch when I synch'ed my music (either manually or using iTunes). To sum up, it seems that MediaMonkey, WMP, and the iPod device use standard mp3 metadata tag for ratings. Now, using Ubuntu 12.04, and now with an Android device: Rhythmbox can't see the song rates, despite those ratings can be seen by MediaMonkey and MS Music Player when I boot with Win7. Is this an issue I can fix with some setting? Is there any program I can use to accomplish this? What do you recommend to sync my music with Android (4.0, Galaxy s2), also keeping the song ratings information updated between Android and my PC? Thanks!!

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• Broken Package on Update Manager

  - by Widy Graycloud

  I dont know what's wrong with my update manager.. It says that the softwares that I installed was broken. Maybe because I force shutdown my laptop, because Ubuntu wont shutdown,showing up desktop wallpaper but not title bar and launcher, but It won't shut down (+that's another bug). I've just update the broken softwares. the size is 60 to 70 MB.. But It doesn't work. Now I cannot update or install any software from Update Manager or Ubuntu Software Center. Can anybody tellme what's wrong? This is what appears when I use Update Manager I use Ubuntu Software Center, and this message appeared I chose repair and when it update the broken softwares using Ubuntu Software Center. It failed. And show up this message. The problem is I can't update or install any program from Ubuntu Software Center and Device Manager anymore. (I closed allprograms include ubuntu software center,and device manager in this case). Some one helpme? I tried to use apt-get install -f in terminal but it shows message like this: E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

  Read the article

• alsa - sound issues on ubuntu 12.04

  - by tam_ubuuser

  i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >