Search Results

Search found 9012 results on 361 pages for 'hardware detection'.

Page 252/361 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• What do you do with a 15 node decommissioned Itanium cluster?

  - by Gomibushi

  We are decommissioning a 15 node Itanium cluster. We don't know what to do with it. Being geeks we want to put it (or its individual nodes) to some cool use, but since it is Itanium we are a bit unsure what that could/would be. We are not bringing it back as production servers and we are considering giving them away, if anyone wants them. It's not the most spiffy hardware, but being 2U rack servers they pack an ok amount of cpu and memory, they're about 3 years old perhaps. Ideas to what runs well on them? Or something one can use them as?

  Read the article

• How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win XP Pro install?

  - by CT.

  I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• SharePoint 2010 and Excel Calculation Services

  - by Cj Anderson

  I'm curious what the requirements are for Excel Calculation Services in Sharepoint 2010. I found an architecture document but it doesn't list out the specific requirements. (architecture I understand that you can install all the services on one server but it isn't recommended. It then talks about how you can scale up the application servers, and web front ends. What should the hardware look like for both the application server and web front ends? Do I need to setup a standalone box for each application server?

  Read the article

• What SATA drive should I install FreeBSD onto? i.e. ar0 vs da0 vs ad4/5

  - by Matt

  I'm installing FreeBSD 8.0 on a server that has hardware SATA Raid. I'm just wondering. What is the difference between these devices. i.e. ar0, da0, ad4, ad5 I take it that ad4 & 5 are my two disks. Somehow the OS can see them individually even though it's one logical mirrored drive. Should I be installing it onto ar0 or one of the adX disks. What is da0? it's smaller than the others. ar0 is not some kind of software raid device is it? Just want to make sure I don't mess this up right from the get go.

  Read the article

• some keyboard keys not working properly

  - by surfmadpig

  I'm using windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

  Read the article

• Windows XP - non-user input data filter message after installing wireless keyboard & mouse

  - by James

  After I installed MS wireless keyboard and mouse and associated software, I started getting this annoying message titled "Hardware installation" telling me the software I am trying to install did not pass the XP logo tests. The software is for "HID non-user input data filter" and I have two options Continue anyway or stop installation. Now, if I try to continue the installation fails, if stop installing another message pops up with a little mouse logo and the whole process repeats itself. after I am done with that message a third dialog appears. This is happening every time I boot up my PC (a desktop), I tried following an advice I found in some forum and download windows update for ID non-user input data filter, but that installation failed as well. The thing is, that both keyboard and mouse are working fine Is there anyway to get past these dialogs ?

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• Blank screen after grub menu

  - by Tim

  I just rebooted an Ubuntu Server 10.04. After choosing boot options in the grub menu, though, it just displays a black screen with the blinking white underscore in the upper-left corner. The machine has had (hardware) trouble with networking before, but the problem remains after 10 minutes, so I don't think it's the problem now. Booting into recovery mode or using earlier kernels yields the same problem. This also happens if I boot from another hard-drive. I haven't yet tried to boot from CD as the machine lacks a CD reader. How should I diagnose the problem? Update: My boot options are: recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 567[redacted] linux /boot/vmlinuz-2.6.32-29-generic root=UUID=567[redacted] ro quiet splash initrd /boot/initrd.img-2.6.32-29-generic Update: Also, I cannot access the virtual terminals (ctrl+alt+Fn).

  Read the article

• Connecting to Aerohive AP's from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• Under what circumstances might an IIS6 website be automatically deleted?

  - by E. Anderson

  Late last week my colleagues did some hardware maintenance on one of our vmWare esxi servers. One of the guests is a Windows Server 2003 Web Edition system that runs our low-traffic web sites. We discovered this morning that one of those websites was no longer working with what appeared to be an SSL error. After logging in, I found that the web site in question had been deleted from IIS! Is it possible for this to happen without a user actually going in and deleting that single web site? All of the other sites were fine. The files for the site in question had not been touched. I just re-created the web site, assigned the SSL cert, and everything was working again. When I logged in, I did see the 'Unexpected Shutdown' dialog.

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• XP SP3 PRO - Delayed write failed $mft- can I get which particular file caused the problem ?

  - by user35020

  Hi - I sometimes get that error when resuming from hibernation : Delayed Write Failed : Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, a usb external drive) which was plugged in when I hibernated was not read at the right moment - or sometimes I simply forgot to plug it when resuming from hibernation. My question is : is there any way to see which particular file/folder/folder status/don't know what failed to be written ? Hard drive functions correctly before and after - no problem. Is there a detailed log someplace or a utility ? Searched and searched but nothing. Thanks for any help !

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do. Thanks!

  Read the article

• Cascading KVM switches

  - by einpoklum

  I have a not-so-small number of computers (say, 5) which I want to access with a single keyboard, USB and monitor. I can get an 8-port KVM switch, which is a pretty expensive piece of hardware; however, in theory, I should be able to cascade KVM switches: Have one 4-port KVM switch between 2 other KVMs (a 2-port and a 4-port). Is this doable (with typical off-the-shelf switches and cables)? Has anyone had experience doing this? Note: I'm interested in USB-only for the keyboard and mouse, and either VGA or DVI for the display. Audio and PS/2 connections are irrelevant for me..

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• Why is the pavucontrol level indicator jumping while nothing plays?

  - by EnterTheLiquidToasterFamily

  The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

  Read the article

• Please define: "Maximum Memory Supported - 10GB, Service Upgradable Only"

  - by Droogans

  I am assuming this means that the RAM modules can only be inserted/removed from some place very inconvenient? Maybe under the keyboard? Or does this mean something more strict, as in the only way to get an upgraded module in the laptop is via some special toolset, or verified through the hardware to allow the system to recognize the new memory? I ask because I'd want to know if I need to buy my own additional RAM, since I can't seem to find a way to get to 8GB. A Google search result turned up very little other than hits for shopping. Here is the laptop in question: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4817549&sku=T78-144301

  Read the article

• Can't install CUDA drivers for GeForce GT555M

  - by saeed

  I've just bought a new Asus n55 laptop. It has 2 graphics cards from Intel and NVIDIA. But when I try to install CUDA's developer driver for my GPU I get this error: "This graphics driver could not find compatible graphics hardware". I have downloaded both of the following files but both of them get mentioned error: Developer Drivers for WinVista and Win7 (270.81) Notebook Developer Drivers for WinVista and Win7 (275.33) How can I fix this problem? Actually how can I develop CUDA programs on my NVIDIA GPU?

  Read the article

• bad switchs duplicate my ip

  - by tacoen

  I had a large area LAN. There were many switch and AP on it, then somehow I couldn't ping my servers, and it's said that the IP was duplicated. I use arpwatch and found out that one of the switch flip-flop-ing the IP. I isolated that troublesome switch using his mac-address. But, since this a large area LAN... I doubt this will be the last cases. If there any software or hardware that I can use to prevent this kind of error? Sorry for my bad English.

  Read the article

• How to achieve redundancy across data centers?

  - by BrandonBT

  I have a LAMP server with a lot of hardware redundancy built in. I am not worried about the server becoming unavailable. What I am worried about, however, are potential network issues in the data center the server is in. What I would like to have is another server in another data center for redundancy. Load balancing is less of a concern. With that said, I am relatively clueless on two points: How to have two servers in two geographically separate data centers that have exactly the same data, in terms of both files and MySQL databases. How to ensure that all traffic coming into one data center are automatically transferred to the other database in the case of a network or server failure at the first data center. Any guidance on how to accomplish the above two problems would be greatly appreciated.

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• How to diagnose RAM?

  - by x-man

  I have a java process that is aborted after a while with SIGSEGV. It started to happen after I upgraded the server with more RAM. Having tested on different JVMs I suspect it might be a hardware problem. But no problem was detected by memtest86. So, what else can I do to detect the source of the problem is? Should I take the RAM modules one by one to detect the faulty module? The server is running on 64bit OpenSuse11.3. The memory is not an ECC one it seems. I have a kit of this (3*4GB * 2 = 24GB): http://www.kingston.com/datasheets/KHX1600C9S3K2_8GX.pdf

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >