Search Results

Search found 137428 results on 5498 pages for 'using statement'.

Page 253/5498 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Using Default Document with Forms Authentication

    - by John Rabotnik
    I have a site hosted on IIS7 with a default document specified as default.aspx. This works fine but my app uses Forms Authentication and I want to disable Anonymous Authentication completely. When I do disable anonymous authentication for everything except the login page, everything works fine but the default document setting stops working. With Anonymous authentication switched on if I visit http://mysite I get passed to http://mysite/default.aspx (which then redirects to the login page if the user hasn't already logged in) If I disable anonymous authentication (leaving only forms based auth enabled) and I visit http://mysite I get a permission denied page from IIS. Yet, if I visit http://mysite/default.aspx directly then the site works fine. I just want to disable anonymous authentication and have http://mysite go to http://mysite/default.aspx. Any ideas would be greatly appreciated.

    Read the article

  • using tcpdump to display XML API requests without headers or ack packets

    - by Carmageddon
    I need assistance, I am trying to use tcpdump in order to capture API requests and responses between two servers, so far I have the following command: tcpdump -iany -tpnAXs0 host xxx.xxx.xxx.xxx and port 6666 My problem is, that the output is still hard to read, because it sends the Headers, and the ack packets. I would like to remove those and only see the XML bodies. I tried to use grep -v, but apparently this is all one request, so it filters the entire thing... Thanks!

    Read the article

  • Display current layout WITHOUT using Windows's language bar

    - by Shiki
    Basically I love quick launch and pinning is not for me, I can't just pin 50 apps, nor pin them to start menu / use the win + type method. Anyway, Quick Launch works perfectly under Win7 IF you don't use the language bar. If you use it, sometimes (or always) it may fail to start/appear, you have to readd it. So my question is: Is there a tray app, a RainMeter way to show this? (First would be better). Thanks. (Best would be if I could switch layout globally but that train is gone. (Look at the changing global layout. Thank you Microsoft. (Irony included)).

    Read the article

  • Using fedora 17 commandline 'mail' program cannot send to hotmail

    - by Eric Leschinski
    I am trying to use the console in Fedora 17 to send an automated email to myself. I run this: echo "email content" | mail -s "blah" [email protected] It works fine, google treats it as a spam email, but when you mark it not spam everything is cool. For Hotmail there are policies to prevent the email from being sent. I do this: echo "email content" | mail -s "blah" [email protected] And the email returns as undeliverable, the email does not even appear in the spam folder and I get this as a response: ----- Transcript of session follows ----- ... while talking to mx3.hotmail.com.: >>> MAIL From:<[email protected]> SIZE=685 <<< 550 DY-001 (BAY0-MC3-F8) Unfortunately, messages from 184.90.101.28 weren't sent. Please contact your +Internet service provider. You can tell them that Hotmail does not relay dynamically-assigned IP ranges. +You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. 554 5.0.0 Service unavailable So apparently hotmail doesn't like spammers so much, they they are blocking anything with a dynamically assigned IP range. Google does not do this. What is the easiest way to just get around this and send an email to hotmail and end up in their spam folder to be unblocked later by the user?

    Read the article

  • Using Bazaar (BZR) on AFP or SMB mounted server not wroking

    - by Dan Berlyoung
    Has anyone been able to get BZR working on a mounted AFT or SMB mounted share? I've tried both (The AFP volume is actually coming off an Xserver.) and neither work. I have BZR 2.0.0 and am running it on a Mac with 10.5. I keep getting an error like this bzr: ERROR: Could not acquire lock "/Volumes/joeserver/Documents/bzr/remote_test/.bzr/checkout/dirstate": [Errno 45] Operation not supported I googled around a bit but only found a fairly stale (2007) bug report on launchad.com (Bug #313625 to be specific.) Any ideas?

    Read the article

  • Creating Routes using the second NIC in the box

    - by Aditya Sehgal
    OS: Linux I need some advice on how to set up the routing table. I have a box with two physical NIC cards eth0 & eth1 with two associated IPs IP1 & IP2 (both of the same subnet). I need to setup a route which will force all messages from IP1 towards IP3 (of the same subnet) to go via IP2. I have a raw socket capture program listening on IP2 (This is not for malicious use). I have set up the routing table as Destination Gateway Genmask Flags Metric Ref Use Iface IP3 IP2 255.255.255.255 UGH 0 0 0 eth1 If I try to specify eth0 while adding the above rule, I get an error "SIOCADDRT: Network is unreachable". I understand from the manpage of route that if the GW specified is a local interface, then that would be use as the outgoing interface. After setting up this rule, if i do a traceroute (-i eth0), the packet goes first to the default gateway and then to IP3. How do I force the packet originating from eth0 towards IP3 to first come to IP2. I cannot make changes to the routing table of the gateway. Please suggest.

    Read the article

  • set tap0 using virt-manager for bridged wireless

    - by DaveO
    After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

    Read the article

  • Multiple servers using same nameservers

    - by Robsimm
    I have 2x servers with the following OS's and Control Panels: Windows Server 2003 running Plesk 9 Centos 5.3 running WHM/cPanel The Windows server 2003 server is hosting the two nameservers: ns1.domain.com ns2.domain.com I have BIND running on the Centos 5.3 server, but I wish for my customers to use the same nameservers ns1.domain.com and ns2.domain.com (as per the Windows Server 2003 server). My first question is - is this possible? And if so, how would I go about configuring both servers to enable such a configuration? Thanks very much.

    Read the article

  • Logging another person off in Windows 7 using Task Manager

    - by BBlake
    Under WinXP, I could use Task Manager's Users tab to log off my wife's account which she always leaves logged in so I don't have to log in to her account and log it out. It's an older machine so I used that trick to free up every resource I could which might potentially slow down the game I'm playing at the time. I recently upgraded the machine to Win7 and when I try the same trick, I get an access denied popup. My logged in account does have Admin rights, so is it as simple as runing Task Manager "as an Administrator" in order to allow this? If so, how can I pull up Task Manager (other than the standard CTRL-ALT-DELETE) to have it pop up with Admin rights in order to log her account off in this manner?

    Read the article

  • Using avconv (ffmpeg) to concatenate a bunch of .bmps into a mkv/avi video

    - by user1509246
    Hoi, Trying to figure out how to get avconv to concatenate a bunch of .bmps together into a video file. Here's what I've got so far: avconv -f image2 -i Capture/%d.bmp -vcodec mpeg4 -r 24 -b:v 20M Capture.mkv While this does work, the quality is terrible - there are tons of artifacts that are visible, the colours are distorted and everything is blurred. I've trawled through the documentation for avconv and ffmpeg, but can't find anything that increases the quality. Any ideas as to how I can get the quality as close to the original bmps as possible? Thanks for lending me your brains, - Alex

    Read the article

  • Filter any mailing list in GMail using the "list:" meta-data

    - by Binary255
    Hi, If I ask GMail to create a filter for a mailing list it creates a rule containing list:mailing-list-identifier, in the case of the NAnt mailing list it wrote: Has the words: list: "nant-users.lists.sourceforge.net" Is there a way to filter any mailing list? I would like to filter conversations from any mailing list containing answers to things I've previously asked (or answered to). Part of that filter is identifying "anything which is part of a mailing list" and I'm wondering if there is a better way than adding another label to all mailing list posts (which is cumbersome).

    Read the article

  • Using 64 bit wuauclt from 32 bit command prompt

    - by Tim Brigham
    I have a script that for legacy reasons needs to run inside a 32 bit command shell. This script also includes references to certain core windows binaries - most notably wuauclt but others as well - which are not accessible by default within the 32 bit environment. This script is being run in several locations including many windows 7 and server 2008 r2 boxes. I'm aware of the possibility to copy files from the system32 to syswow64 in order to get around this. Is there any better method - something along the lines of adding an entry to the path variable - which will allow me to fall back to these 64 bit binaries from within a 32 bit script?

    Read the article

  • Using numerous IP addresses in a browser in linux

    - by BHare
    I own a dedicated server than runs Debian Linux. I have 64 IP addresses configured on the machine. I am looking to open a page (just has to access it with lynx or anything to read) with one of the non-default 64 IP addresses, besides just the default one. How can I do this?

    Read the article

  • Converge Voice and Data networks using Sonicwall

    - by skinneejoe
    We are looking to converge VOIP and Data traffic onto a single wire so that our client's VOIP phones pass data through to the users computer. We are specing out a new Sonicwall NSA appliance to handle routing functions and layer 2 switches to manage VLANS. Not a huge network, medium sized. What should I know about converging the networks onto a single wire? Obviously I'll want to prioritize voice traffic, is this handled solely in the Sonicwall with QoS configurations or do the layer 2 switches need to be configured differently? Any other pitfalls I should be aware of, or any good resources for learning more?

    Read the article

  • using wildcards in host-aliases for Tomcat's virtual hosts

    - by Marten Sytema
    I want to do the following with Tomcat 5.5: *.mydomain.com should go to my webapp, located at the virtual host mydomain.com. So I have a virtual host mydomain.com, and I want all *.mydomain.com also go there. Now, if I do this, it doesn't pick up the virtual host, and just goes to the default one (which is not set to mydomain.com). How to fix this? I basically would like to allow wildcards in the host alias, or in the virtual host name itself. (The DNS settings are alright by the way)

    Read the article

  • ssh crashes connecting using host names on windows

    - by AliGibbs
    On a new install of Windows Server 2008, I attempting to use ssh to connect to another host. I have installed putty/openssh. This works without a problem when trying a command such as: ssh 192.168.0.2 However, this will crash when trying something like: ssh testserver with the error as follows in the windows event viewer: Faulting application ssh.exe, version 0.0.0.0, time stamp 0x40843497, faulting module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a76d, exception code 0xc0000005, fault offset 0x0004bbb8, process id 0xe94, application start time 0x01cb873195e795d5. Any suggestions? thanks in advance

    Read the article

  • Limit user profile on specific OU using Group Policy

    - by Sergei
    We have a host that will be used for creating VM clones from time to time for testing purposes.It is used actively for testing and users tend to keep a lot of files in their profiles.We would like to limit users profile size to avoid cloning unnecessary files to new VMs. Is there way to impose limit on user profile on OU level without introducing roaming profiles?

    Read the article

  • Using the same machineKey across two web farms

    - by wwilkins
    We have two separate NLB web farms. The first farm runs an app that delivers content to the customer facing application on the second NLB. We've noticed a single Cryptographic error in our logs that occurs whenever a page loading content from the first farm is accessed. Is there any reason to not give all of the servers in both farms the same machineKey settings?

    Read the article

  • Creating a vm using Hyper-V causes the host of BSOD

    - by Arcass
    Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

    Read the article

  • Unable to logon using terminal server connection

    - by satch
    I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

    Read the article

  • Multiple subdomains, SSL on only one using port 80

    - by Emil Flink
    I am running a Apache2 server with three subdomains defined in separate files in /etc/apache2/sites-available I need ONE of those subdomains to be SSL-secured on port 80 for an application to work. Port 80 is required due to circumstances out of my control. The other subdomains are also on port 80. Now, when all subdomains are enabled in Apache the SSL-subdomain is NOT running SSL. If I disable the other subdomains SSL on the SSL-subdomain WORKS. Is there a way to fix this?

    Read the article

  • No response from example.com using Apache

    - by stevens-G
    I am unable to access example.com or by local IP after restarting the server. I checked to make sure httpd service was on. I looked at the error_log in /var/log/httpd and found nothing. Tried to restart httpd again and it says 'Ok'. I'm not sure where else to check. I did move DocumentRoot from /var/www to /web-root and it worked before restarting the server. I tried pointing it back to /var/www and still not able to view the page. IPtables have not changed. Any suggestions?

    Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >