Search Results

Search found 33788 results on 1352 pages for 'codeit right'.

Page 254/1352 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

  • Changes in Language Punctuation [closed]

    - by Wes Miller
    More social curiosity than actual programming question... (I got shot for posting this on Stack Overflow. They sent me here. At least i hope here is where they meant.) Based on the few responses I got before the content police ran me off Stack Overflow, I should note that I am legally blind and neatness and consistency in programming are my best friends. A thousand years ago when I took my first programming class (Fortran 66) and a mere 500 years ago when I tokk my first C and C++ classes, there were some pretty standard punctuation practices across languages. I saw them in Basic (shudder), PL/1, PL/AS, Rexx even Pascal. Ok, APL2 is not part of this discussion. Each language has its own peculiar punctuation. Pascal's periods, Fortran's comma separated do loops, almost everybody else's semicolons. As I learned it, each language also has KEYWORDS (if, for, do, while, until, etc.) which are set off by whitespace (or the left margin) if, etc. Each language has function, subroutines of whatever they're called. Some built-in some user coded. They were set off by function_name( parameters );. As in sqrt( x ) or rand( y ); Lately, there seems to be a new set of punctuation rules. Especially in c++ where initializers get glued onto the end of variable declarations int x(0); or auto_ptr p(new gizmo); This usually, briefly fools me into thinking someone is declaring a function prototype or using a function as a integer. Then "if" and 'for' seems to have grown parens; if(true) for(;;), etc. Since when did keywords become functions. I realize some people think they ARE functions with iterators as parameters. But if "for" is a function, where did the arg separating commas go? And finally, functions seem to have shed their parens; sqrt (2) select (...) I know, I koow, loosening whitespace rules is good. Keep reading. Question: when did the old ways disappear and this new way come into vogue? Does anyone besides me find it irritating to read and that the information that the placement of punctuation used to convey is gone? I know full well that K&R put the { at the end of the "if" or "for" to save a byte here and there. Can't use that excuse here. Space as an excuse for loss of readability died as HDD space soared past 100 MiB. Your thoughts are solicited. If there is a good reason to do this, I'll gladly learn it and maybe in another 50 years I'll get used to it. Of course it's good that compilers recognize these (IMHO) typos and keep right on going, but just because you CAN code it that way doesn't mean you HAVE to, right?

    Read the article

  • What is Devops and Why You Should Care?

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} According to Wikipedia, DevOps (a portmanteau of development and operations) is a software development method that stresses communication, collaboration and integration between software developers and information technology (IT) professionals. DevOps is a response to the interdependence of software development and IT operations. It aims to help an organization rapidly produce software products and services. That definition of DevOps is the – what. The “why” is even easier. Standardized development methodology, clear communication and documented processes supported by a standards-based, proven middleware platform improves application development and management cycles, brings agility and provides greater availability and security to your IT infrastructure. Clearly, DevOps is about connecting people, products and processes. Ultimately, DevOps is about connecting IT to business. If you haven’t already seen it, do check out Bob Rhubart’s feature on DevOps in the latest issue of Oracle Magazine. And for more information on how Oracle Fusion Middleware, the #1 application infrastructure foundation, visit us on oracle.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • XNA RenderTarget2D Sample

    - by Michael B. McLaughlin
    I remember being scared of render targets when I first started with XNA. They seemed like weird magic and I didn’t understand them at all. There’s nothing to be frightened of, though, and they are pretty easy to learn how to use. The first thing you need to know is that when you’re drawing in XNA, you aren’t actually drawing to the screen. Instead you’re drawing to this thing called the “back buffer”. Internally, XNA maintains two sections of graphics memory. Each one is exactly the same size as the other and has all the same properties (such as surface format, whether there’s a depth buffer and/or a stencil buffer, and so on). XNA flips between these two sections of memory every update-draw cycle. So while you are drawing to one, it’s busy drawing the other one on the screen. Then the current update-draw cycle ends, it flips, and the section you were just drawing to gets drawn to the screen while the one that was being drawn to the screen before is now the one you’ll be drawing on. This is what’s meant by “double buffering”. If you drew directly to the screen, the player would see all of those draws taking place as they happened and that would look odd and not very good at all. Those two sections of graphics memory are render targets. All a render target is, is a section of graphics memory to which things can be drawn. In addition to the two that XNA maintains automatically, you can also create and set your own using RenderTarget2D and GraphicsDevice.SetRenderTarget. Using render targets lets you do all sorts of neat post-processing effects (like bloom) to make your game look cooler. It also just lets you do things like motion blur and lets you create mirrors in 3D games. There are quite a lot of things that render targets let you do. To go along with this post, I wrote up a simple sample for how to create and use a RenderTarget2D. It’s available under the terms of the Microsoft Public License and is available for download on my website here: http://www.bobtacoindustries.com/developers/utils/RenderTarget2DSample.zip . Other than the ‘using’ statements, every line is commented in detail so that it should (hopefully) be easy to follow along with and understand. If you have any questions, leave a comment here or drop me a line on Twitter. One last note. While creating the sample I came across an interesting quirk. If you start by creating a Windows Game, and then make a copy for Windows Phone 7, the drop-down that lets you choose between drawing to a WP7 device and the WP7 emulator stays grayed-out. To resolve this, you need to right click on the Windows Phone 7 version in the Solution Explorer, and choose “Set as StartUp Project”. The bar will then become active, letting you change the target you which to deploy to. If you want another version to be the one that starts up when you press F5 to start debugging, just go and right-click on that version and choose “Set as StartUp Project” for it once you’ve set the WP7 target (device or emulator) that you want.

    Read the article

  • Ti Launchpad

    - by raysmithequip
    Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

    Read the article

  • How do you report out user research results?

    - by user12277104
    A couple weeks ago, one of my mentees asked to meet, because she wanted my advice on how to report out user research results. She had just conducted her first usability test for her new employer, and was getting to the point where she wanted to put together some slides, but she didn't want them to be boring. She wanted to talk with me about what to present and how best to present results to stakeholders. While I couldn't meet for another week, thanks to slideshare, I could quickly point her in the direction that my in-person advice would have led her. First, I'd put together a panel for the February 2012 New Hampshire UPA monthly meeting that we then repeated for the 2012 Boston UPA annual conference. In this panel, I described my reporting techniques, as did six of my colleagues -- two of whom work for companies smaller than mine, and four of whom are independent consultants. Before taking questions, we each presented for 3 to 5 minutes on how we presented research results. The differences were really interesting. For example, when do you really NEED a long, written report (as opposed to an email, spreadsheet, or slide deck with callouts)? When you are reporting your test results to the FDA -- that makes sense. in this presentation, I describe two modes of reporting results that I use.  Second, I'd been a participant in the CUE-9 study. CUE stands for Comparative Usability Evaluation, and this was the 9th of these studies that Rolf Molich had designed. Originally, the studies were designed to show the variability in evaluation methods practitioners use to evaluate websites and applications. Of course, using methods and tasks of their own choosing, the results were wildly different. However, in this 9th study, the tasks were the same, the participants were the same, and the problem severity scale was the same, so how would the results of the 19 practitioners compare? Still wildly variable. But for the purposes of this discussion, it gave me a work product that was not proprietary to the company I work for -- a usability test report that I could share publicly. This was the way I'd been reporting results since 2005, and pretty much what I still do, when time allows.  That said, I have been continuing to evolve my methods and reporting techniques, and sometimes, there is no time to create that kind of report -- the team can't wait the days that it takes to take screen shots, go through my notes, refer back to recordings, and write it all up. So in those cases, I use bullet points in email, talk through the findings with stakeholders in a 1-hour meeting, and then post the take-aways on a wiki page. There are other requirements for that kind of reporting to work -- for example, the stakeholders need to attend each of the sessions, and the sessions can't take more than a day to complete, but you get the idea: there is no one "right" way to report out results. If the method of reporting you are using is giving your stakeholders the information they need, in a time frame in which it is useful, and in a format that meets their needs (FDA report or bullet points on a wiki), then that's the "right" way to report your results. 

    Read the article

  • Chalk Talk with John: What Does User Experience Mean to You?

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Author: John Brunswick The "Chalk Talk with John" series will explore the practical value of Middleware in the context of two fictional communities, shared through analogies aligned to enterprise technology.  This format offers business stakeholders and IT a common language for understanding the benefits of technology in support of their business initiatives, regardless of their current level of technical knowledge. I will endeavor to showcase an episode highlighting business use cases and how technology plays a role in business on a bi-weekly basis. The debut episode highlights the benefits of user experience capabilities supplied by Portal technologies, by juxtaposing the communities of Middleware Fields and Codeaway Valley with regard to the time and effort their residents spend performing everyday tasks.  This comparison provides insight into the benefits of leveraging a common user experience foundation to support the tasks that our employees, customers and partners engage in on a daily basis with our organizations. Take a look and let me know your thoughts! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} About me: Hi, I am John Brunswick, an Oracle Enterprise Architect. As an Oracle Enterprise Architect, I focus on the alignment of technical capabilities in support of business vision and objectives, as well as the overall business value of technology.  Before coming to Oracle, I was a Practice Manager within BEA System's Business Interaction Division consulting organization, orchestrating enterprise systems in support of line of business goals. Connect with me on Twitter and visit my site for Oracle Fusion Middleware related tips.

    Read the article

  • Customers Discuss: Real-World Operational Reporting with Oracle GoldenGate

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} As businesses leverage business intelligence and analytics for day-to-day decision making, operational reporting solutions become more and more common. While some companies can use their production OLTP system for running operational reports, for many it is too much overhead and performance impact for transaction processing systems.  Oracle GoldenGate’s real-time data integration capabilities enable companies to create a real-time replica of their OLTP systems, dedicated for operational reporting. This instance can be optimized for the reports needed as well such as containing only the tables needed from the source. Oracle GoldenGate has certified solutions for many Oracle applications such as EBusiness Suite, Peoplesoft, JD Edwards, to offload operational reporting to another reporting server that has real-time data feeding from the production system. At Oracle OpenWorld we will be hearing from a panel of Oracle GoldenGate customers how they deployed GoldenGate for operational reporting. Comcast, Turk Telekom, and Raymond James will be sharing their experiences and the benefits achieved when implementing GoldenGate’s solution. If you have performance degradation in your production systems due to reporting or ad-hoc queries, and you will be at OpenWorld, don’t miss this informative session: Real-World Operational Reporting with Oracle GoldenGate: Customer Panel-- Tuesday Oct 2nd 11:45am Mascone West 3005. For other data integration sessions at OpenWorld, please check our Focus-On document.  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} If you cannot attend OpenWorld, please check out related white paper “Using Oracle GoldenGate to Achieve Operational Reporting for Oracle Applications” to learn more.

    Read the article

  • Why We Do What We Do. (Part 3 of 5 Part Series on JDE 5G Postponed)

    - by Kem Butller-Oracle
    By Lyle Ekdahl - Oracle JD Edwards Sr. VP General Manager  In the closing of part two of this 5 part blog series, I stated that in the next installment I would explore the expected results of the digital overdrive era and the impact it will have on our economy. While I have full intentions of writing on that topic, I am inspired today to write about something that is top of mind. It’s top of mind because it has come up several times recently conversations with my Oracle’s JD Edwards team members, with customers and our partners, plus I feel passionately about why I do what I do…. It is not what we do but why we do that thing that we do Do you know what you do? For the most part, I bet you could tell me what you do even if your work has changed over the years.  My real question is, “Do you get excited about what you do, and are you fulfilled? Does your work deliver a sense of purpose, a cause to work for, and something to believe in?”  Alright, I guess that was not a single question. So let me just ask, “Why?” Why are you here, right now? Why do you get up in the morning? Why do you go to work? Of course, I can’t answer those questions for you but I can share with you my POV.   For starters, there are several things that drive me. As many of you know by now, I have a somewhat competitive nature but it is not solely the thrill of winning that actually fuels me. Now don’t get me wrong, I do like winning occasionally. However winning is only a potential result of competing and is clearly not guaranteed. So why compete? Why compete in business, and particularly why in this Enterprise Software business?  Here’s why! I am fascinated by creative and building processes. It is about making or producing things, causing something to come into existence. With the right skill, imagination and determination, whether it’s art or invention; the result can deliver value and inspire. In both avocation and vocation I always gravitate towards the create/build processes.  I believe one of the skills necessary for the create/build process is not just the aptitude but also, and especially, the desire and attitude that drives one to gain a deeper understanding. The more I learn about our customers, the more I seek to understand what makes the successful and what difficult issues cause them to struggle. I like to look for the complex, non-commodity process problems where streamlined design and modern technology can provide an easy and simple solution. It is especially gratifying to see our customers use our software to increase their own ability to deliver value to the market. What an incredible network effect! I know many of you share this customer obsession as well as the create/build addiction focused on simple and elegant design. This is what I believe is at the root of our common culture.  Are JD Edwards customers on a whole different than other ERP solutions’ customers? I would argue that for the most part, yes, they are. They selected our software, and our software is different. Why? Because I believe that the create/build process will generally result in solutions that reflect who built it and their culture. And a culture of people focused on why they create/build will attract different customers than one that is based on what is built or how the solution is delivered. In the past I have referred to this idea as character of the customer, and it transcends industry, size and run rate. Now some would argue that JD Edwards has some customers who are characters. But that is for a different post. As I have told you before, the JD Edwards culture is unique, and its resulting economy is valuable and deserving of our best efforts. 

    Read the article

  • SSIS Debugging Tip: Using Data Viewers

    - by Jim Giercyk
    When you have an SSIS package error, it is often very helpful to see the data records that are causing the problem.  After all, if your input has 50,000 records and 1 of them has corrupt data, it can be a chore.  Your execution results will tell you which column contains the bad data, but not which record…..enter the Data Viewer. In this scenario I have created a truncation error.  The input length of [lastname] is 50, but the output table has a length of 15.  When it runs, at least one of the records causes the package to fail.     Now what?  We can tell from our execution results that there is a problem with [lastname], but we have no idea WHICH record?     Let’s identify the row that is actually causing the problem.  First, we grab the oft’ forgotten Row Count shape from our toolbar and connect it to the error output from our input query.  Remember that in order to intercept errors with the error output, you must redirect them.     The Row Count shape requires 1 integer variable.  For our purposes, we will not reference the variable, but it is still required in order for the package to run.  Typically we would use the variable to hold the number of rows in the table and refer back to it later in our process.  We are simply using the Row Count as a “Dead End” for errors.  I called my variable RowCounter.  To create a variable, with no shapes selected, right-click on the background and choose Variable.     Once we have setup the Row Count shape, we can right-click on the red line (error output) from the query, and select Data Viewers.  In the popup, we click the add button and we will see this:     There are other fancier options we can play with, but for now we just want to view the output in a grid.  WE select Grid, then click OK on all of the popup windows to shut them down.  We should now see a grid with a pair of glasses on the error output line.     So, we are ready to catch the error output in a grid and see that is causing the problem!  This time when we run the package, it does not fail because we directed the error to the Row Count.  We also get a popup window showing the error record in a grid.  If there were multiple errors we would see them all.     Indeed, the [lastname] column is longer than 15 characters.  Notice the last column in the grid, [Error Code – Description].  We knew this was a truncation error before we added the grid, but if you have worked with SSIS for any length of time, you know that some errors are much more obscure.  The description column can be very useful under those circumstances! Data viewers can be used any time we want to see the data that is actually in the pipeline;  they stop the package temporarily until we shut them.  Also remember that the Row Count shape can be used as a “Dead End”.  It is useful during development when we want to see the output from a dataflow, but don’t want to update a table or file with the data.  Data viewers are an invaluable tool for both development and debugging.  Just remember to REMOVE THEM before putting your package into production

    Read the article

  • Is there a theory for "transactional" sequences of failing and no-fail actions?

    - by Ross Bencina
    My question is about writing transaction-like functions that execute sequences of actions, some of which may fail. It is related to the general C++ principle "destructors can't throw," no-fail property, and maybe also with multi-phase transactions or exception safety. However, I'm thinking about it in language-neutral terms. My concern is with correctly designing error handling in C++ functions that must be reliable. I would like to know what the concepts below are called so that I can learn more about them. I'm sorry that I can't ask the question more directly. Since I don't know this area I have provided an example to explain my question. The question is at the end. Here goes: Consider a sequence of steps or actions executed sequentially, where actions belong to one of two classes: those that always succeed, and those that may fail. In the examples below: S stands for an action that always succeeds (called "no-fail" in some settings). F stands for an action that may fail (for example, it might fail to allocate memory or do I/O that could fail). Consider a sequences of actions (executed sequentially from left to right): S->S->S->S Since each action in the sequence above succeeds, the whole sequence succeeds. On the other hand, the following sequence may fail because the last action may fail: S->S->S->F So, claim: a sequence has the no-fail (S) property if and only if all of its actions are no-fail. Now, I'm interested in action sequences that form "atomic transactions", with "failure atomicity," i.e. where either the whole sequence completes successfully, or there is no effect. I.e. if some action fails, the earlier ones must be rolled back. This requires that any successfully executed actions prior to a failing action must always be able to be rolled back. Consider the sequence: S->S->S->F S<-S<-S In the example above, the first row is the forward path of the transaction, and the second row are inverse actions (executed from right to left) that can be used to roll back if the final top row actions fails. It seems to me that for a transaction to support failure atomicity, the following invariant must hold: Claim: To support failure atomicity (either completion or complete roll-back on failure) all actions preceding the latest failable (F) action on the forward path (marked * in the example below) must have no-fail (S) inverses. The following is an example of a sequence that supports failure atomicity: * S->F->F->F S<-S<-S Further, if we want the transaction to be able to attempt cancellation mid-way through, but still guarantee either full completion or full rollback then we need the following property: Claim: To support failure atomicity and cancellation mid-way through execution, in the face of errors in the inverse (cancellation) path, all actions following the earliest failable (F) inverse on the reverse path (marked *) must be no-fail (S). F->F->F->S->S S<-S<-F<-F * I believe that these two conditions guarantee that an abortable/cancelable transaction will never get "stuck". My questions are: What is the study and theory of these properties called? are my claims correct? and what else is there to know? UPDATE 1: Updated terminology: what I previously called "robustness" is called atomicity in the database literature. UPDATE 2: Added explicit reference to failure atomicity, which seems to be a thing.

    Read the article

  • SQL Server Optimizer Malfunction?

    - by Tony Davis
    There was a sharp intake of breath from the audience when Adam Machanic declared the SQL Server optimizer to be essentially "stuck in 1997". It was during his fascinating "Query Tuning Mastery: Manhandling Parallelism" session at the recent PASS SQL Summit. Paraphrasing somewhat, Adam (blog | @AdamMachanic) offered a convincing argument that the optimizer often delivers flawed plans based on assumptions that are no longer valid with today’s hardware. In 1997, when Microsoft engineers re-designed the database engine for SQL Server 7.0, SQL Server got its initial implementation of a cost-based optimizer. Up to SQL Server 2000, the developer often had to deploy a steady stream of hints in SQL statements to combat the occasionally wilful plan choices made by the optimizer. However, with each successive release, the optimizer has evolved and improved in its decision-making. It is still prone to the occasional stumble when we tackle difficult problems, join large numbers of tables, perform complex aggregations, and so on, but for most of us, most of the time, the optimizer purrs along efficiently in the background. Adam, however, challenged further any assumption that the current optimizer is competent at providing the most efficient plans for our more complex analytical queries, and in particular of offering up correctly parallelized plans. He painted a picture of a present where complex analytical queries have become ever more prevalent; where disk IO is ever faster so that reads from disk come into buffer cache faster than ever; where the improving RAM-to-data ratio means that we have a better chance of finding our data in cache. Most importantly, we have more CPUs at our disposal than ever before. To get these queries to perform, we not only need to have the right indexes, but also to be able to split the data up into subsets and spread its processing evenly across all these available CPUs. Improvements such as support for ColumnStore indexes are taking things in the right direction, but, unfortunately, deficiencies in the current Optimizer mean that SQL Server is yet to be able to exploit properly all those extra CPUs. Adam’s contention was that the current optimizer uses essentially the same costing model for many of its core operations as it did back in the days of SQL Server 7, based on assumptions that are no longer valid. One example he gave was a "slow disk" bias that may have been valid back in 1997 but certainly is not on modern disk systems. Essentially, the optimizer assesses the relative cost of serial versus parallel plans based on the assumption that there is no IO cost benefit from parallelization, only CPU. It assumes that a single request will saturate the IO channel, and so a query would not run any faster if we parallelized IO because the disk system simply wouldn’t be able to handle the extra pressure. As such, the optimizer often decides that a serial plan is lower cost, often in cases where a parallel plan would improve performance dramatically. It was challenging and thought provoking stuff, as were his techniques for driving parallelism through query logic based on subsets of rows that define the "grain" of the query. I highly recommend you catch the session if you missed it. I’m interested to hear though, when and how often people feel the force of the optimizer’s shortcomings. Barring mistakes, such as stale statistics, how often do you feel the Optimizer fails to find the plan you think it should, and what are the most common causes? Is it fighting to induce it toward parallelism? Combating unexpected plans, arising from table partitioning? Something altogether more prosaic? Cheers, Tony.

    Read the article

  • Session Sharing with another User on *NIX and Windows

    - by Giri Mandalika
    Oracle Solaris Since Solaris is not widely known for its graphical interface, let's just focus on sharing a terminal session in read-only mode with another user on the same system. Here is an example. eg., % finger Login Name TTY Idle When Where root Super-User pts/1 Sat 16:57 dhcp-amer-vpn-rmdc-a sunperf ??? pts/2 4 Sat 16:41 pitcher.sfbay.sun.com In this example, two users root and sunperf are connected to the same system from two different terminals pts/1 and pts/2 respectively. If the root user wants to show something to sunperf user -- what s/he is doing in her/his terminal, for example, it can be accomplished with the following command. script -a /dev/null | tee -a <target_terminal eg., # script -a /dev/null | tee -a /dev/pts/2 Script started, file is /dev/null # # uptime 5:04pm up 1 day(s), 2:56, 2 users, load average: 0.81, 0.81, 0.81 # # isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 # # exit Script done, file is /dev/null After the script .. | tee .. command, sunperf user should be able to see the root user's stdin and stdout contents in her/his own terminal until the script session exits in root user's terminal. Since this kind of sharing is based on capturing and redirecting the contents to the target terminal, the users on the receiving end won't be able to see whatever is being edited on initiators' terminal [using editors such as vi]. Also it is not possible to share the session with any connected user on the system unless the initiator has the necessary permissions and privileges. The script utility records everything printed in a terminal session, while the tee utility replicates the contents of the screen capture on to the standard output of the target terimal. The tee utility does not buffer the output - so, the screen capture from the initiators' terminal appears almost right away in the target terminal. Though I never tested, this technique may work on all *NIX and Linux flavors with little or no changes. Also there might be other ways to accomplish this. [Thanks to Sujeet for sharing this tip] Microsoft Windows Most of the Windows users may rely on VNC services to share a desktop session. Another way to share the desktop session is to use the Remote Desktop Connection (RDC) client. Here are the steps. Connect to the target Windows system using Remote Desktop Connection client Launch Windows Task Manager Navigate to the "Users" tab Find the user session that you want to connect to and have full control over as the other user who is currently holding that session Select the user name in Windows Task Manager, right click and choose the option "Remote Control" A window pops up on the other user's session with the message "<USER is requesting to control your session remotely. Do you accept the request?" Once the other user says "Yes", you will be granted access to that session. Since then both users should be able to see the same screen and even control the session from their respective workstations.

    Read the article

  • Syntax of passing lambda

    - by Astara
    Right now, I'm working on refactoring a program that calls its parts by polling to a more event-driven structure. I've created sched and task classes with the sced to become a base class of the current main loop. The tasks will be created for each meter so they can be called off of that instead of polling. Each of the events main calls are a type of meter that gather info and display it. When the program is coming up, all enabled meters get 'constructed' by a main-sub. In that sub, I want to store off the "this" pointer associated with the meter, as well as the common name for the "action routine. void MeterMaker::Meter_n_Task (Meter * newmeter,) { push(newmeter); // handle non-timed draw events Task t = new Task(now() + 0.5L); t.period={0,1U}; t.work_meter = newmeter; t.work = [&newmeter](){newmeter.checkevent();};<<--attempt at lambda t.flags = T_Repeat; t.enable_task(); _xos->sched_insert(t); } A sample call to it: Meter_n_Task(new CPUMeter(_xos, "CPU ")); 've made the scheduler a base class of the main routine (that handles the loop), and I've tried serveral variations to get the task class to be a base of the meter class, but keep running into roadblocks. It's alot like "whack-a-mole" -- pound in something to fix something one place, and then a new probl pops out elsewhere. Part of the problem, is that the sched.h file that is trying to hold the Task Q, includes the Task header file. The task file Wants to refer to the most "base", Meter class. The meter class pulls in the main class of the parent as it passes a copy of the parent to the children so they can access the draw routines in the parent. Two references in the task file are for the 'this' pointer of the meter and the meter's update sub (to be called via this). void *this_data= NULL; void (*this_func)() = NULL; Note -- I didn't really want to store these in the class, as I wanted to use a lamdba in that meter&task routine above to store a routine+context to be used to call the meter's action routine. Couldn't figure out the syntax. But am running into other syntax problems trying to store the pointers...such as g++: COMPILE lsched.cc In file included from meter.h:13:0, from ltask.h:17, from lsched.h:13, from lsched.cc:13: xosview.h:30:47: error: expected class-name before ‘{’ token class XOSView : public XWin, public Scheduler { Like above where it asks for a class, where the classname "Scheduler" is. !?!? Huh? That IS a class name. I keep going in circles with things that don't make sense... Ideally I'd get the lamba to work right in the Meter_n_Task routine at the top. I wanted to only store 1 pointer in the 'Task' class that was a pointer to my lambda that would have already captured the "this" value ... but couldn't get that syntax to work at all when I tried to start it into a var in the 'Task' class. This project, FWIW, is my teething project on the new C++... (of course it's simple!.. ;-))... I've made quite a bit of progress in other areas in the code, but this lambda syntax has me stumped...its at times like thse that I appreciate the ease of this type of operation in perl. Sigh. Not sure the best way to ask for help here, as this isn't a simple question. But thought I'd try!... ;-) Too bad I can't attach files to this Q.

    Read the article

  • Musings on the launch of SQL Monitor

    - by Phil Factor
    For several years, I was responsible for the smooth running of a large number of enterprise database servers. We ran a network monitoring tool that was primitive by today’s standards but which performed the useful function of polling every system, including all the Servers in my charge. It ran a configurable script for each service that you needed to monitor that was merely required to return one of a number of integer values. These integer values represented the pain level of the service, from 10 (“hurtin’ real bad”) to 1 (“Things is great”). Not only could you program the visual appearance of each server on the network diagram according to the value of the integer, but you could even opt to run a sound file. Very soon, we had a large TFT Screen, high on the wall of the server room, with every server represented by an icon, and a speaker next to it that would give out a series of grunts, groans, snores, shrieks and funeral marches, depending on the problem. One glance at the display, and you could dive in with iSQL/QA/SSMS and check what was going on with your favourite diagnostic tools. If you saw a server icon burst into flames on the screen or droop like a jelly, you dropped your mug of coffee to do it.  It was real fun, but I remember it more for the huge difference it made to have that real-time visibility into how your servers are performing. The management soon stopped making jokes about the real reason we wanted the TFT screen. (It rendered DVDs beautifully they said; particularly flesh-tints). If you are instantly alerted when things start to go wrong, then there was a good chance you could fix it before being alerted to the problem by the users of the system.  There is a world of difference between this sort of tool, one that gives whoever is ‘on watch’ in the server room the first warning of a potential problem on one of any number of servers, and the breed of tool that attempts to provide some sort of prosthetic DBA Brain. I like to get the early warning, to get the right information to help to diagnose a problem: No auto-fix, but just the information. I prefer to leave the task of ascertaining the exact cause of a problem to my own routines, custom code, intuition and forensic instincts. A simulated aircraft cockpit doesn’t do anything for me, especially before I know where I should be flying.  Time has moved on, and that TFT screen is now, with SQL Monitor, an iPad or any other mobile or static device that can support a browser. Rather than trying to reproduce the conceptual topology of the servers, it lists them in their groups so as to give a display that scales with the increasing number of databases you monitor.  It gives the history of the major events and trends for the servers. It gives the icons and colours that you can spot out of the corner of your eye, but goes on to give you just enough information in drill-down to give you a much clearer idea of where to look with your DBA tools and routines. It doesn't swamp you with information.  Whereas a few server and database-level problems are pretty easily fixed, others depend on judgement and experience to sort out.  Although the idea of an application that automates the bulk of a DBA’s skills is attractive to many, I can’t see it happening soon. SQL Server’s complexity increases faster than the panaceas can be created. In the meantime, I believe that the best way of helping  DBAs  is to make the monitoring process as simple and effective as possible,  and provide the right sort of detail and ‘evidence’ to allow them to decide on the fix. In the end, it is still down to the skill of the DBA.

    Read the article

  • Velocity collision detection (2D)

    - by ultifinitus
    Alright, so I have made a simple game engine (see youtube) And my current implementation of collision resolution has a slight problem, involving the velocity of a platform. Basically I run through all of the objects necessary to detect collisions on and resolve those collisions as I find them. Part of that resolution is setting the player's velocity = the platform's velocity. Which works great! Unless I have a row of platforms moving at different velocities or a platform between a stack of tiles.... (current system) bool player::handle_collisions() { collisions tcol; bool did_handle = false; bool thisObjectHandle = false; for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(prevPos.x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.y >= collideQueue[temp]->get_prev_pos().y + collideQueue[temp]->get_img()->get_height()) if (tcol.top > 0) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.y + get_img()->get_height() <= collideQueue[temp]->get_prev_pos().y) if (tcol.bottom > 0) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x/*collideQueue[temp]->get_vel().x*/,collideQueue[temp]->get_vel().y); ableToJump = true; jumpTimes = maxjumpable; thisObjectHandle = did_handle = true; } /// /// ADD CODE FROM NEXT CODE BLOCK HERE (on forum, not in code) /// } for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.x + get_img()->get_width() <= collideQueue[temp]->get_prev_pos().x) if (tcol.left > 0) { add_pos(-tcol.left,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.x >= collideQueue[temp]->get_prev_pos().x + collideQueue[temp]->get_img()->get_width()) if (tcol.right > 0) { add_pos(tcol.right,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } } return did_handle; } (if I add the following code {where the comment to do so is}, which is glitchy, the above problem doesn't happen, though it brings others) if (!thisObjectHandle) { if (tcol.bottom > tcol.top) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } else if (tcol.top > tcol.bottom) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } } How would you change my system to prevent this?

    Read the article

  • No external microphone Acer AO722

    - by Leeghwater
    The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

    Read the article

  • Hyperion EPM 11.1.2.3 Webcast Tutorials

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} These LIVE presentation Webcast Tutorials for Partners will be delivered in August 2013: Oracle Hyperion Planning on Exalytics In-Memory Machine - August 6, 2013 Oracle Hyperion Tax Provision - August 8, 2013 Oracle Planning and Budgeting Cloud Service - August 13, 2013 Go here for more details and to register for these. There are also new updated Webcast Tutorials for Oracle Partners in our EPM 11.1.2.3 Update Series: Oracle Hyperion Planning 11.1.2.3 (PS3) Oracle Hyperion Calculation Manager 11.1.2.2 Refresher and 11.1.2.3 (PS3) NEW Oracle Data Relationship Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Data Quality Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Close Suite 11.1.2.3 (PS3) NEW Oracle Hyperion Profitability & Cost Management 11.1.2.3 (PS3) Introducing Oracle Data Relationship Governance (DRG) Also note new content for Oracle BI Applications 11g with ODI: NEW Overview and Architecture of Oracle BI Applications 11.1.1.7.1 for ODI NEW Configuring Oracle BI Applications 11.1.1.7.1 for ODI These are all part of the compilation of Oracle BI/EPM online tutorials and webinars for Partners, where you can find many topics are covered. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Snap App Windows to Pre-Defined Screen Sections with Acer GridVista

    - by Asian Angel
    The window snapping feature in Windows 7 and the ability to organize monitor(s) into specific gridded sections have both become popular lately. If you love the idea of having both combined in a single software then join us as we look at Acer GridVista. Note: Acer GridVista works with Windows XP, Vista, & 7. It will also work with dual monitors. Setup Acer GridVista comes in a zip file format and at first you might assume that it is portable in nature but it is not. Once you unzip the enclosed folder you will need to double click on “Setup.exe” to install the program. Acer GridVista in Action Once you have installed the program and started it up all that you will notice at first is the new “System Tray Icon”. Here you can see the “Context Menu”… The only menu command that you will likely use most of the time is the “Grid Configuration Command”. Notice that for our single monitor setup that it lists “Display 1”. The “Single Setting” is enabled by default and you can easily choose the layout that best suits your needs. The enabled layout style will always be highlighted in yellow for easy reference. For our example we chose the “Triple (primary at right)” layout style. Each section will be specifically numbered as shown here. Do not worry…the grid and numbers only appear for a moment and then become invisible again until you move an app window into that section/area of your screen. On every regular app window that you open you will notice three new buttons in the upper right corner. Here is what each of these new buttons do: Acer GridVista Extensions (Transparent, Send To Window Grid, About Acer GridVista): Viewable in a drop-down menu Lock To Grid (Enable/Disable): Enabled by default –> Note: Set to disable on a particular window to keep it free of the “grid locking function” Always On Top (Enable/Disable): Disabled by default A good look at the “Extensions Drop-Down Menu” where you can set an app window to be transparent or send it to a specific screen section on your monitor(s). If you open an app it will not automatically lock into a specific section. To lock the window into a specific section drag-and-drop the app window into the desired section. Notice the red outline and highlighted number on “Section 2” below. The red outline and highlighted number serves as an indicator that if you release the app window at that moment it will lock into the outlined/highlighted section. Now that Notepad is locked into “Section 2” you can see that it is maximized within that section. Continue to drag-and-drop your app windows into the appropriate sections as desired…apps can still be reduced to the “Taskbar” the same as before. Options These are the options available for Acer GridVista… Conclusion If you have been wanting the ability to “snap” windows and organize them into specific screen areas then Acer GridVista is definitely a program that you should try out. Links Download Acer GridVista at Softpedia View detailed information at the Acer GridVista Homepage Similar Articles Productive Geek Tips Multitask Like a Pro with AquaSnapHelp Troubleshoot the Blue Screen of Death by Preventing Automatic RebootAdd Windows 7’s AeroSnap Feature to Vista and XPResize Windows to Specific Dimensions Easily With SizerKeyboard Ninja: Assign a Hotkey to any Window TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Playing Games In Chrome Made Easier Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet

    Read the article

  • OpenGl / C++ and some strange light problem on half board

    - by mlodziaszka
    I have some problem with lights in my opengl "game". I have board with is square (-50,50), (50, 50), (50, -50), (-50,-50) x and z since y doesn't matter at all. I tried to make something like flashlight its moving and rotating with camera (me), but when i try to rotate more then 90 degree to left or right it just give diffrend light: http://imageshack.us/photo/my-images/688/lightij.jpg/ (left is spotlight, right point light) There is also a point light in the middle, but its working strange(not like a pointlight) it shines only on half of the board from (-50,50), (50, 50), (50, 0), (-50,-0) x and y: Link to my repo where u can find game exe in download and full code in source: https://bitbucket.org/mlodziaszka/my_game All more fragments of light: float gl_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; glLightModelfv(GL_LIGHT_MODEL_AMBIENT, gl_amb); glEnable(GL_LIGHTING); // Wlaczenie oswietlenia glShadeModel(GL_SMOOTH); // Wybor techniki cieniowania glEnable(GL_LIGHT0); // Wlaczenie 0-go zrodla swiatla glEnable(GL_LIGHT1); Cubes parametri: float m1_amb[] = { 1.0f, 0.0f, 0.0f, 1.0f }; float m1_dif[] = { 1.0f, 0.0f, 0.0f, 1.0f }; float m1_spe[] = { 1.0f, 0.0f, 0.0f, 1.0f }; glMaterialfv(GL_FRONT, GL_AMBIENT, m1_amb); glMaterialfv(GL_FRONT, GL_DIFFUSE, m1_dif); glMaterialfv(GL_FRONT, GL_SPECULAR, m1_spe); glMaterialf(GL_FRONT, GL_SHININESS, 50.0f); Texture parametri: float m1_amb[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float m1_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float m1_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; glMaterialfv(GL_FRONT, GL_AMBIENT, m1_amb); glMaterialfv(GL_FRONT, GL_DIFFUSE, m1_dif); glMaterialfv(GL_FRONT, GL_SPECULAR, m1_spe); glMaterialf(GL_FRONT, GL_SHININESS, 0.0f); glTexEnvf( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE ); Light0: //with some magic sn't working anyway float l0_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; float l0_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l0_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l0_pos[] = { g_Camera.m_vPosition.x, g_Camera.m_vPosition.y, g_Camera.m_vPosition.z, 1.0f }; float temp = 0.0f, temp2 = 0.0f, temp3 = 0.0f; if(g_Camera.m_vView.z < g_Camera.m_vPosition.z) { temp = g_Camera.m_vView.x - g_Camera.m_vPosition.x; temp2 = g_Camera.m_vView.z - g_Camera.m_vPosition.z; } else { temp = g_Camera.m_vView.x - g_Camera.m_vPosition.x; temp2 = g_Camera.m_vView.z - g_Camera.m_vPosition.z; } float l0_pos1[] = {temp, 0.0f, temp2}; //float l0_pos1[] = {-1.0f, 0.0f, -1.0f}; glLightfv(GL_LIGHT0, GL_AMBIENT, l0_amb); glLightfv(GL_LIGHT0, GL_DIFFUSE, l0_dif); glLightfv(GL_LIGHT0, GL_SPECULAR, l0_spe); glLightfv(GL_LIGHT0, GL_POSITION, l0_pos); glLightf (GL_LIGHT0, GL_SPOT_CUTOFF, 15.0f); glLightfv(GL_LIGHT0, GL_SPOT_DIRECTION, l0_pos1); Light1: float l1_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; float l1_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l1_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l1_pos[] = { 0.0f, 0.0f, 0.0f, 1.0f }; glLightfv(GL_LIGHT1, GL_AMBIENT, l1_amb); glLightfv(GL_LIGHT1, GL_DIFFUSE, l1_dif); glLightfv(GL_LIGHT1, GL_SPECULAR, l1_spe); glLightfv(GL_LIGHT1, GL_POSITION, l1_pos); I know that way I made this very old, but for now i want to keep this like that. I wouldbe realy gratefull if someone can tell me what is wrong with my lights xD full code: link up ^^

    Read the article

  • Passed: Exam 70-480: Programming in HTML5 with JavaScript and CSS3

    First off: Mission accomplished successfully. And it was fun! Using the resources listed in my previous article about Learning Content, I'd like to thank Microsoft Technical Evangelists Jeremy Foster and Michael Palermo for their excellent jump start videos on Channel 9, and the various authors at Pluralsight. Local Prometric testing centre Back in November I chose a local testing centre which was the easiest to access from my office despite the horrible traffic you might experience here on the island. Actually, it was not the closest one. But due to their website, their awards as Microsoft Learning Center, and my general curiosity about the premises, I gave FRCI my priority. Boy, how should I regret this decision this morning... The official Prometric exam guide asks any attendee to show up at least 30 minutes prior to the scheduled time of the test. Well, this should have been the easier part but unfortunately due to heavier traffic than usual I arrived only 20 minutes before time. Not too bad but more to come. The building called 'le Hub' is nicely renovated and provides the right environment for an IT group of companies like FRCI. I think they have currently 5 independent IT departments over there. Even the handling at the reception was straight forward, welcoming and at my ease. But then... first shock: "We don't have any exam registration for today." - Hm, that's nice... Here's my mail confirmation from Prometric. First attack successfully handled and the lady went off again to check their records. Next shock: A couple of minutes later, another guy tries to explain me that "the staff of the testing centre is already on vacation and the centre is officially closed." - Are you kidding me? Here's the official confirmation by Prometric, and I don't find it funny that I take a day off today only to hear this kind of blubbering nonsense. I thought that I'll be on the safe side choosing a company with a good reputation here on the island. Another 40 (!) minutes later, they finally come back to the waiting area with a pre-filled form about the test appointment. And finally, after an hour of waiting, discussing, restarting the testing PC, and lots of talk, I am allowed to sit down and take the exam. Exam details Well, you know the rules. Signing an NDA doesn't allow me to provide you any details about the questions or topics that have been covered. Please check out the official exam description, and you're on the right way. Sorry, guys... ;-) The result "Congratulations! You have passed this Microsoft Certification exam." - In general, I have to admit that the parts on HTML5 and CSS3 were the easiest after all, and that I have to get myself a little bit more familiar with certain Javascript features like class definitions, inheritance and data security. Anyway, exam passed - who cares about the details? Next goal Of course, the journey to Microsoft Certifications continues and my next goal is to pass exams 70-481 - Essentials of Developing Windows Store Apps using HTML5 and JavaScript and 70-482 - Advanced Windows Store App Development using HTML5 and JavaScript. This would allow me to achieve the certification of MCSD: Windows Store Apps using HTML5. I guess, during 2013 I'll be busy with various learning and teaching lessons.

    Read the article

  • How to convert pitch and yaw to x, y, z rotations?

    - by Aaron Anodide
    I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( So my quesiton is: how do you calculate the X, Y, and Z rotations for an object in terms of pitch and yaw? Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

    Read the article

  • Know your Data Lineage

    - by Simon Elliston Ball
    An academic paper without the footnotes isn’t an academic paper. Journalists wouldn’t base a news article on facts that they can’t verify. So why would anyone publish reports without being able to say where the data has come from and be confident of its quality, in other words, without knowing its lineage. (sometimes referred to as ‘provenance’ or ‘pedigree’) The number and variety of data sources, both traditional and new, increases inexorably. Data comes clean or dirty, processed or raw, unimpeachable or entirely fabricated. On its journey to our report, from its source, the data can travel through a network of interconnected pipes, passing through numerous distinct systems, each managed by different people. At each point along the pipeline, it can be changed, filtered, aggregated and combined. When the data finally emerges, how can we be sure that it is right? How can we be certain that no part of the data collection was based on incorrect assumptions, that key data points haven’t been left out, or that the sources are good? Even when we’re using data science to give us an approximate or probable answer, we cannot have any confidence in the results without confidence in the data from which it came. You need to know what has been done to your data, where it came from, and who is responsible for each stage of the analysis. This information represents your data lineage; it is your stack-trace. If you’re an analyst, suspicious of a number, it tells you why the number is there and how it got there. If you’re a developer, working on a pipeline, it provides the context you need to track down the bug. If you’re a manager, or an auditor, it lets you know the right things are being done. Lineage tracking is part of good data governance. Most audit and lineage systems require you to buy into their whole structure. If you are using Hadoop for your data storage and processing, then tools like Falcon allow you to track lineage, as long as you are using Falcon to write and run the pipeline. It can mean learning a new way of running your jobs (or using some sort of proxy), and even a distinct way of writing your queries. Other Hadoop tools provide a lot of operational and audit information, spread throughout the many logs produced by Hive, Sqoop, MapReduce and all the various moving parts that make up the eco-system. To get a full picture of what’s going on in your Hadoop system you need to capture both Falcon lineage and the data-exhaust of other tools that Falcon can’t orchestrate. However, the problem is bigger even that that. Often, Hadoop is just one piece in a larger processing workflow. The next step of the challenge is how you bind together the lineage metadata describing what happened before and after Hadoop, where ‘after’ could be  a data analysis environment like R, an application, or even directly into an end-user tool such as Tableau or Excel. One possibility is to push as much as you can of your key analytics into Hadoop, but would you give up the power, and familiarity of your existing tools in return for a reliable way of tracking lineage? Lineage and auditing should work consistently, automatically and quietly, allowing users to access their data with any tool they require to use. The real solution, therefore, is to create a consistent method by which to bring lineage data from these data various disparate sources into the data analysis platform that you use, rather than being forced to use the tool that manages the pipeline for the lineage and a different tool for the data analysis. The key is to keep your logs, keep your audit data, from every source, bring them together and use the data analysis tools to trace the paths from raw data to the answer that data analysis provides.

    Read the article

  • Java EE 7 Roadmap

    - by Linda DeMichiel
    The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

    Read the article

  • New Oracle BI Mobile Demonstration and SampleApp V305 on OTN

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 There is a new version of the Oracle BI Mobile HD app for iPhones and iPad. So download / update your App now. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Then we have also changed the public server for hosting the Oracle BI Mobile Demonstration. This server image is based on the standard OBIEE 11.1.1.7 Sample Application (V305) which you can also download as a VirtualBox Image (this is a turnkey virtual environment with full SampleAppV305 preconfigured) from OTN here.   When your App is on your iPad, go into the “Settings” and “Add Server” to fill in the host location and access details as shown below: · Host = slc02ojq.oracle.com · Port = 7780 · Username = Prodney · Password = Admin123 · Note: SSL and SSO = OFF This same SampleApp V305 Demonstration server can also be accessed from your PC browser @ http://slc02ojq.oracle.com:7780/analytics. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Using two joysticks in Cocos2D

    - by Blade
    Here is what I am trying to do: With the left joystick the player can steer the figure and with the right joystick it can attack. Problem is that the left joystick seems to get all the input, the right one does not even register anything. I enabled multipletouch after the eagleView and gone thoroughly over the code. But I seem to miss something. I initiliaze both sticks and it shows me both of them in game, but like I said, only the left one works. I initialize them both. From the h. file: SneakyJoystick *joystick; SneakyJoystick *joystickRight; And in m.file I synthesize, deallocate and initialize them. In order to use one for controlling and the other for attacking I put this: -(void)updateStateWithDeltaTime:(ccTime)deltaTime andListOfGameObjects:(CCArray*)listOfGameObjects { if ((self.characterState == kStateIdle) || (self.characterState == kStateWalkingBack) || (self.characterState == kStateWalkingLeft) || (self.characterState == kStateWalkingRight)|| (self.characterState == kStateWalkingFront) || (self.characterState == kStateAttackingFront) || (self.characterState == kStateAttackingBack)|| (self.characterState == kStateAttackingRight)|| (self.characterState == kStateAttackingLeft)) { if (joystick.degrees > 60 && joystick.degrees < 120) { if (self.characterState != kStateWalkingBack) [self changeState:kStateWalkingBack]; }else if (joystick.degrees > 1 && joystick.degrees < 59) { if (self.characterState != kStateWalkingRight) [self changeState:kStateWalkingRight]; } else if (joystick.degrees > 211 && joystick.degrees < 300) { if (self.characterState != kStateWalkingFront) [self changeState:kStateWalkingFront]; } else if (joystick.degrees > 301 && joystick.degrees < 360){ if (self.characterState != kStateWalkingRight) [self changeState:kStateWalkingRight]; } else if (joystick.degrees > 121 && joystick.degrees < 210) { if (self.characterState != kStateWalkingLeft) [self changeState:kStateWalkingLeft]; } if (joystickRight.degrees > 60 && joystickRight.degrees < 120) { if (self.characterState != kStateAttackingBack) [self changeState:kStateAttackingBack]; }else if (joystickRight.degrees > 1 && joystickRight.degrees < 59) { if (self.characterState != kStateAttackingRight) [self changeState:kStateAttackingRight]; } else if (joystickRight.degrees > 211 && joystickRight.degrees < 300) { if (self.characterState != kStateAttackingFront) [self changeState:kStateAttackingFront]; } else if (joystickRight.degrees > 301 && joystickRight.degrees < 360){ if (self.characterState != kStateAttackingRight) [self changeState:kStateAttackingRight]; } else if (joystickRight.degrees > 121 && joystickRight.degrees < 210) { if (self.characterState != kStateAttackingLeft) [self changeState:kStateAttackingLeft]; } [self applyJoystick:joystick forTimeDelta:deltaTime]; [self applyJoystick:joystickRight forTimeDelta:deltaTime]; } Maybe it has something to do with putting them both to time delta? I tried working around it, but it did not work. So I am thankful for any input you guys can give me :)

    Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >