Search Results

Search found 24951 results on 999 pages for 'default scope'.

Page 254/999 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

  • Booting off a ZFS root in 14.04

    - by RJVB
    I've been running a Debian derivative (LMDE) on a ZFS root for half a year now. It was created by cloning a regular ext4-based install with all the necessary packages onto a ZFS pool, chrooting into that pool and recreating a grub menu and bootloader. The system uses an ext-3 dedicated /boot partition. I would like to do the same with Ubuntu 14.04, but have encountered several obstacles. There is no Trusty zfs-grub package The default grub package doesn't have ZFS support built in. I found a small bug in the build system responsible for that (report with patch created) and built my own grub packages. The built-in ZFS support is dysfunctional, it does not add the proper arguments to the kernel command line I thus installed the ZoL grub package I also use on my LMDE system, which does give me a correct grub.cfg However, even with that correct grub.cfg, the boot process apparently doesn't retrieve the bootfs parameter from the ZFS pool; instead the variable that's supposed to receive the value remains empty. As a result, initrd tries to load the default pool ("rpool"), which fails of course. I can however import the pool by hand, and complete the process by hand. If memory serves me well, I also had to disable apparmor, to avoid the boot process from blocking after importing the pool. Am I overlooking something? Just for comparison, I installed the Ubuntu 3.13 kernel on my LMDE system, and that works just fine (i.e. the identical kernel and grub binaries allow successful booting without glitches on LMDE but not on Ubuntu).

    Read the article

  • What is the possible disadvantage of putting declarations in inner blocks, instead of at beginning of function?

    - by shan23
    At the place where I work, there are explicit guidelines for placement of declarations of variables. According to that, it is required to put them at the global level and / or at the beginning of functions, and not in inner blocks (such as a for loop). Since they've been specified by persons more experienced than I am, I'm sure that there must be a good reason for it, but I cannot figure out what that might be. It would be nice to know if there are any compile time / run time advantages at having them declared at a bigger scope.

    Read the article

  • How do I automatically start Clamz with AMZ files for Amazon MP3 downloads?

    - by Takkat
    Chromium can open downloaded files with the default application (e.g. PDF in Evince). In my setup a downloaded .AMZ (for Amazon MP3) always opened with Gedit. However I would like to have all downloaded .amz files to autromatically open with Clamz, a command line tool for downloading that works like a charm. As in Nautilus my .amz files were associated to open with Gedit too I thought it was a good idea to add a clamz.desktop file in ~/.local/share/applications (according to this answer) [Desktop Entry] Encoding=UTF-8 Name=Clamz Comment=Open AMZ files for Amazon MP3 download Exec=/usr/bin/clamz %u Terminal=True Type=Application Icon= Categories=Application; StartupNotify=true MimeType=audio/x-amzxml; NoDisplay=true This lets me choose Clamz as default application in Nautilus. But when opening an .amz file in Nautilus it still does not open with Clamz as expected but is treated as an executable text file instead (note that the executable bit is not set!). Is there any other way to make Chromium or Nautilus always open an .amz file with Clamz? Did I miss to change setting in another place?

    Read the article

  • Odd SVN Checkout failures occur frequenctly on VMWare virtual machines

    - by snowballhg
    We've recently been experiencing seemingly random SVN checkout failures on our Hudson build system. Google search has failed me; I'm hoping the super user community can help me out :-) We are occasionally receiving the following SVN error when our Hudson build jobs checkout source via the Hudson Subversion plug-in (which uses svn kit): ERROR: Failed to check out http://server/svnroot/trunk org.tmatesoft.svn.core.SVNException: svn: Processing REPORT request response failed: XML document structures must start and end within the same entity. (/svnroot/!svn/vcc/default) svn: REPORT request failed on '/svnroot/!svn/vcc/default' This issue seems to only occur when checking out from our Virtual Machines (Windows XP, Fedora 9, Fedora 12) using Hudson's SVN Plug-in. Systems that use the traditional SVN client seem to work. SVN Server version: 1.6.6 Hudson version: 1.377 Hudson SVN Plugin Version: 1.17 Has anyone dealt with this issue, or have any suggestions? Thanks

    Read the article

  • full-screen browsing with IE10 on Windows 8

    - by Tom
    I have updated to Windows 8 and got Internet Explorer 10, but I don't get the full screen mode, is just like another desktop app. All links on the Windows Store Apps (Bing, News...) redirect to the old desktop and open my default browser. I have been looking on the IE10 options but I don't see this option. How can I solve this? Maybe this info help: Windows version: Windows 8 Pro 64 bits Installed Browsers: Firefox, Chrome (default), Opera, IE10 I have seem other people with the same version and is working

    Read the article

  • xubutnu Nvidia Settings not remembered

    - by hozza
    I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • How can I change shell in Ubuntu?

    - by Sanoj
    I have a Ubuntu Server VPS and I want to use /bin/bash/ as my shell. How can I change my shell? I have root access but I don't work as root. So dash is my default shell now. I have read How do I make Bash my default shell on Ubuntu? and chsh seams to be the preferred way to go. But when I type chsh /bin/bash I get this message: chsh: unknown user /bin/bash And if I just type /bin/bash the Bash shell seams to work fine. How to change it?

    Read the article

  • Is The Ease Of Windows Phone Development Ruining Its Image

    - by Tim Murphy
    I was reading an article on Mashable recently by a long time iPhone user who is living solely on a Lumia 920 at the moment and giving her assessment.  One thing that struck a nerve with me was her describing the Windows Phone ecosystem as immature.  She wasn’t saying this because of the number of apps or the big names like most people do.  She means the quality of the apps in the store. This hit a nerve with me.  I find it hard to believe that the majority of app on iOS are of any higher quality than any other platform.  I believe in any ecosystem you are going to find some high end, high quality apps, but the majority by default will be from people who are trying to solve a problem but do not have the resources to have top graphics and full blown testing.  There will also be a large number that are just there trying to trick you into giving up some cash. Does any of the mean that we shouldn’t take notice of this complaint?  Of course not!  We should always strive to publish the best quality apps possible.  Don’t do things like leaving default app icons and backgrounds.  Put a little effort into your design.  You should also spend as much time as possible ensuring against crashes and giving the user the best experience possible.  Think through your apps organization and navigation.  Go the extra step of putting it into beta and letting select people use it and give you feedback before going to full release. Remember, if we want people to appreciate the Windows Phone platform we have to make sure we give them apps that they are going to enjoy using. del.icio.us Tags: Windows Phone,iPhone,iOS,Nokia,Lumia 920,Mashable

    Read the article

  • What should I know before starting my first consulting project?

    - by bo4sho
    I just got a job for a small project. I have all the relevant skills and knowledge to complete the project, but I am concerned about getting screwed over because this is my first time working on a consultant basis. We have already agreed on an hourly wage that I'm happy with, so that's not an issue. I'm just worried that since this is my first time working on my own, I'm going to make some mistakes that could be easily avoided if I had someone give me advice beforehand. This is what I already know to do/not do: -Get everything in writing -Limit the scope of the project. Once I start the actually coding, all features should be frozen. -Make sure to communicate constantly with my client. In addition he wants an max hourly cap. What is a good way to come up with one? What else do I need to know?

    Read the article

  • Lotus Notes won't open a hyperlink/uri in a browser!

    - by Andy O
    I'm still new to Lotus, but I have LN 8.0.2, and have it set up to open hyperlinks "using the browser i have set as the default for this operating system" which in my case is Firefox 3.6.13. If I try to select "use the browser embedded in this client" then it just forgets it after I click save (ie if i go back into preferences it's reset to the default for this operating system option) Windows XP SP 3. Whenever I click on a link in an email...memo... then it does nothing and flashes an underscore underneath it. It's so basic and so annoying there must be something I'm missing. Any help please!

    Read the article

  • Nagios: Is it possible to have multiple IPs for a host?

    - by Aknosis
    In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

    Read the article

  • How to run sudo command with no password?

    - by aychedee
    tl;dr: How does the ubuntu user on the AWS images for Ubuntu Server 12.04 have passwordless sudo for all commands when there is no configuration for it in `/etc/sudoers'? I'm using Ubuntu server 12.04 on Amazon. I want to add a new user that has the same behaviour as the default ubuntu user. Specifically I want passwordless sudo for this new user. So I've added a new user and went to edit /etc/sudoers (using visudo of course). From reading that file it seemed like the default ubuntu user was getting it's passwordless sudo from being a member of the admin group. So I added my new user to that. Which didn't work. Then I tried adding the NOPASSWD directive to sudoers. Which also didn't work. Anyway, now I'm just curious. How does the ubuntu user get passwordless privileges if they aren't defined in /etc/sudoers. What is the mechanism that allows this?

    Read the article

  • Is there a version of Debian-Lenny that is legal for export from the US?

    - by molecules
    I wanted to bundle my application in a Debian-Lenny Virtual Machine so others could download it and run it without having to configure anything. However, I don't want to have to worry about US legal issues. Many of the packages in a default Debian installation include encryption algorithms. Are all default versions export-safe?    If not, is there an export-safe version?       If not, is there an easy way to make one?

    Read the article

  • Local dns for testing websites using mobile devices

    - by Morpheu5
    Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

    Read the article

  • OpenBSD: Gateway outside subnet (works in Linux)

    - by kshade
    We need to set up an OpenBSD host to use a default gateway that's outside of it's subnet. This is all I need to do on Linux (not the actual IPs) to achieve it: ifconfig eth0 33.33.33.33/31 up route add 33.33.33.254 dev eth0 route add default gw 33.33.33.254 The problem is that we don't know the proper equivalent of the middle command in OpenBSD. The man page says: If the destination is directly reachable via an interface requiring no intermediary system to act as a gateway, the -iface modifier should be specified; Sadly we can't seem to figure out how to make it work with that. This is a virtual host on an OVH server, they have documentation for many other operating systems showing how to do it here: http://help.ovh.co.uk/BridgeClient

    Read the article

  • Slight stuttering when moving windows in fresh 12.04 install

    - by Konsolkongen
    Installed Ubuntu 12.04 today and my problem is that when I'm moving the windows around my screen it doesn't feel smooth at all. Usually I can fix this by changing the refresh rate to 60Hz, but this time it doesn't help. My graphics card is a Nvidia GTX 560Ti and I've tried both the 295.40, 295.45 and 304.43 (which I'm currently using) but neither has resolved my problem. I searched around a bit and tried changing the refresh-rate using compizconfig-settings-manager and xrandr. No change using CCSM, but when I tried xrandr I got this reply: konsolkongen@konsolkongen-desktop:~$ xrandr -r 60Rate 60.0 Hz not available for this size - which is nonsense of course. This is what my xorg.conf file looks like: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1680x1050_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Any help would be greatly appreciated, my obsession with video quality can't stand stuttering like this. For what it's worth though, I don't have any screen tearing, so at least V-sync is on. Thanks.

    Read the article

  • A quick tip for those working with the Windows Phone 7 AD SDK.

    - by mbcrump
    One thing that I’ve noticed in several apps in the Windows Phone 7 marketplace is the ad chopping off on the right hand side. I decided that my next Windows Phone 7 app will be ad supported so why not sign up for the Advertising SDK and investigate this issue. *Note: If you want to see this in an actual app then download the free app called “Road Rage”. So here is an example of what I am talking about: You will notice that the right hand side of the AD is chopped off using the default ad banner. You can see the border on the left hand side clearly. So, what exactly is going on? Let’s take a look at this in the designer. From this image we can see it clearer, the margin of the grid that the ad is contained in needs to be removed. By default, the ContentPanel in a Windows Phone Page has a margin already set on it. See below for an example of this: <!--ContentPanel - place additional content here--> <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0"> </Grid> If you simply remove that margin then your ad will display properly as shown below. It’s strange that I’ve seen this in multiple WP7 applications in the marketplace. If you are trying to make money off Ads, you would probably want to make sure the full ad is displayed. I am hoping this short post helped someone.   Subscribe to my feed

    Read the article

  • Gentoo+urxvt+terminus: How do I change font version?

    - by gaidal
    In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

    Read the article

  • Restrict only some plugins to specific sites in Google Chrome

    - by Christian
    I am looking for a way to set up Google Chrome so that it will run a certain plug-in (Java, what else?) only on whitelisted sites, but other plug-ins (like the PDF viewer) everywhere. From playing with the policies available for Chrome, I think there are basically two levels of plug-in management: List of disabled plugins/enabled plugins: Controls whether a plug-in exists for the browser at all This pair of policies applies to plug-ins, but not to sites. Default plug-in settings/Allow plug-ins on sites: Controls on which sites plug-ins can run This set of policies applies to sites, but not to individual plugins, and it cannot override the first pair. There appears to be no way to configure Chrome so that some plug-ins only run on whitelisted sites, but others run everywhere by default. I have also looked at filtering content on the firewall/proxy level, but I'm not convinced it can be done securely there. Filtering by URLs (file names) or content types can be circumvented trivially, and identification by content inspection cannot be safe either.

    Read the article

  • Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

    - by iyl
    I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

    Read the article

  • How do I create the "Gnome-Desktop-Item-Edit" program's launch icon with root privileges and more?

    - by GanZ
    I personally dont prefer running commands in terminal to achieve a task and prefer apps to execute the job. Creating launcher for apps is one such command where I prefer the gnome-desktop-item-edit application for creating launchers. If the gnome package is installed, just searching "create launcher" opens the app. But, it doesnt serve any purpose, because for starters the application cannot create launchers for various apps without root permission and the location where the apps have to be created. Usually the launcher apps with root permission can be created at /usr/share/applications and without root permission at /.local/share/applications. I dont prefer the latter location as it is vulnerable to deletion. Hence, in order to create the launchers through gnome with root, everytime I am forced to open this through terminal using the below command! $ sudo gnome-desktop-item-edit ~/.local/share/applications --create-new I dont want to open terminal everytime I want to create an application launcher on unity! I am able to lock the "Create Launcher" App in the Launcher, but not with root privileges So I want to be able to create the "Create Launcher" app shortcut on unity with default root privileges and for the app to create the launchers at usr/share/applications by default! Please help! P.S. I dont have enough rep points to add screenshots to help with the question!

    Read the article

  • ATI 9550 shows up as laptop in displays after update to 12.04, how do I fix this?

    - by D_H
    My guess is this is on here somewhere but I have searched and even tried looking at bunch of other similar video problems. My ATI 9550 shows up as laptop in displays after update to Ubuntu 12.04, how do I fix this? I found the following command on another post sudo lshw -c video. I get this when I run that command: *-display:0 UNCLAIMED description: VGA compatible controller product: RV350 AS [Radeon 9550] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm vga_controller bus_master cap_list configuration: latency=32 mingnt=8 resources: memory:c0000000-cfffffff ioport:c000(size=256) memory:e5000000-e500ffff memory:e4000000-e401ffff *-display:1 UNCLAIMED description: Display controller product: RV350 AS [Radeon 9550] (Secondary) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 66MHz capabilities: pm cap_list configuration: latency=32 mingnt=8 resources: memory:d0000000-dfffffff memory:e5010000-e501ffff" This way more info than the command showed in he other post and as far as I can tell right. This doesn't look to me like a laptop video would list? I also see this command xrandr, it reports this: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 This is what shows in displays for resolutions but only the 1280x1024 works the others produce tearing in the video. Also I should have mentioned 3D mode does not work. I have tried ATI/AMD drivers the new one won't load and older ones won't work. I found out the newer driver no longer supports the 9550.

    Read the article

  • Ask the Readers: What Are Your Must Have Presentation Tools?

    - by Jason Fitzpatrick
    Giving a presentation, be it in front of the Board of Directors or a roomful of students, has come a long way from paper handouts and poster boards. This week we want to hear about your must-have presentation tools. Whether your must-have tool is a piece of hardware, an application, or a web-based tool, we want to hear all about it. Sound off in the comments with your favorite presentation tool and how it helps you present better. Make sure to check back in on Friday for the What You Said roundup to scope out your fellow readers’ tips and tricks. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

    Read the article

  • How to connect another computer to the router

    - by Call Me Dummy
    I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

    Read the article

  • Is there a way to adjust colors of a specific window?

    - by Synetech
    Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

    Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >