Search Results

Search found 22877 results on 916 pages for 'network storage'.

Page 255/916 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• Find computer names on a private network (with nmap?)

  - by paracaudex

  On a LAN, I want to find out the names of all the connected computers using a cross-platform program, preferably nmap. I know I can do nmap -sn xxx.xxx.xxx.xxx/24 (where xxx.xxx.xxx.xxx is a local IP address) to find hosts which are up, but how do I find the computers' hostnames? Do they broadcast this in a way that I can find using nmap? UPDATE: It looks like Angry IP Scanner can do this. How does it do this? Can I replicate it with nmap?

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Lion MacBook Pro will not load webpages with DNS just after wake

  - by NReilingh

  I'm working with a 2011 MacBook Pro running Lion (10.7.2), that after waking from sleep (i.e. opening the lid) takes an inordinately long amount of time (2-3 minutes or more) to get a usable internet connection. Upon waking, the wi-fi icon signifies it is negotiating a network connection, and completes one a few seconds later. At this point, network diagnostics will not show any issues, and everything in Network preferences looks as normal: I'm connected to the proper network, have the right IP address and gateway, and DNS settings are correct. However, any site accessed with a domain name (like http://www.google.com) in Safari will return the "You are not connected to the Internet." error. Accessing a site directly, say, with Google's 74.125.226.212, is successful. Yet, Network Diagnostics will insist that DNS is functioning properly. After a few minutes, the following lines will be printed to the Console log, and regular behavior will be restored. 11/18/11 8:11:31.288 PM airportd: _doAutoJoin: Already associated to “Wireless”. Bailing on auto-join. 11/18/11 8:11:32.000 PM kernel: en1: BSSID changed to 00:25:9c:63:91:bd This behavior occurs only when waking from sleep--not when turning wi-fi on and off. This problem also occurs when using a wired Ethernet connection. As per this thread, I have tried flushing the DNS cache and wiping the wireless network from memory (it's not a protected network). Neither have worked.

  Read the article

• How to connect Android phone to a Wifi network using PPPoE?

  - by Slavo

  I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

  Read the article

• How difficult will it be to switch DHCP from Windows 2000 to our network router?

  - by MetalSearGolid

  While I know a bit about networking, I am more of a programmer, and I have never set up a DHCP server. I have always allowed a router to assign IP addresses. However, my boss has asked me to switch out our old Win2k Domain Controller and DHCP server to a new server. The catch is that he wants to just use our router to assign IP addresses rather than have the new server do it. Is this going to be more than just disconnecting the old server? And if so, are there any documents or tips anyone can help me to make the transition a bit smoother? The new server will most likely have Windows Server 2008 R2. Any advice I can get on this matter would be greatly appreciated.

  Read the article

• Trouble connecting to a local SQL server instance from the web

  - by dfarney

  We have a small network behind a firewall (WatchGuard XTM 2 series) and network switch. On our network we have multiple instances of SQL server, but 1 in specific that I would like to be able to access remotely from our website. We have a static IP address from our ISP and then all the machines on the network have a locally assigned dynamic IP address. When trying to connect to the database from outside our network how do I get the request to be directed to the proper machine / SQL instance? Is it a parameter in my connection string or something in my firewall? A few things to rule out: 1) The firewall is allowing access from the website to our network. I added the site's IP and opened up port 1433. Also, when trying to connect and monitoring the firewall no exceptions come up as they did before I added the proper IP address. 2) Remote connections on the SQL server has been setup and enabled. I've done a lot of reading up on remote connections and I am sure it has been setup properly. I am currently getting this error message on my site: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• Running .NET app from network share in Win 7?

  - by mlangille

  We have a .NET 1.1 application that we keep on a netowork share. We install the .NET Framerwork to the local PCs and also set the full trust via the following: %windir%\Microsoft.NET\Framework\v1.1.4322\caspol -pp off -cg LocalIntranet_Zone FullTrust This has worked fine on all PCs to date however now we have a few new PCs with Win7 and the process no longer is working. The app will run fine from a local drive in Win7 but running the networked copy results in a general exception error. Any ideas on how to get this to work under Win7?

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• Is it possible to change error messages for users connecting to network printers?

  - by eric.s

  We are cleaning up our print server (Win XP). To test that printers are no longer really there we have set up some tests. These tests have left us with 176 questionable printers. We have now set Print access to Everyone to Deny. Testing shows this gives the user a 5 Access is denied. message. We would like to change this message for the user, so when they call our workstudy's who answer the phone do not interpret this as a computer rights management issue and can route the call properly. Is it possible? Is this error number system wide, or just for printing errors? If it's not a system wide error where might the string for this error be?

  Read the article

• How to connect via SSH to a linux mint system that is connected via OpenVPN

  - by Hilyin

  Is there a way to make SSH port not get sent through VPN so when my computer is connected to a VPN, it can still be remoted in via SSH from its non-VPN IP? I am using Mint Linux 13. Thank you for your help! This is the instructions I followed to setup the VPN: Open Terminal Type: sudo apt-get install network-manager-openvpn Press Y to continue. Type: sudo restart network-manager Download BTGuard certificate (CA) by typing: sudo wget -O /etc/openvpn/btguard.ca.crt http://btguard.com/btguard.ca.crt Click on the Network Manager icon, expand VPN Connections, and choose Configure VPN A Network Connections window will appear with the VPN tab open. Click Add. 8. A Choose A VPN Connection Type window will open. Select OpenVPN in the drop-down menu and click Create.. . In the Editing VPN connection window, enter the following: Connection name: BTGuard VPN Gateway: vpn.btguard.com Optional: Manually select your server location by using ca.vpn.btguard.com for Canada or eu.vpn.btguard.com for Germany. Type: select Password User name: username Password: password CA Certificate: browse and select this file: /etc/openvpn/btguard.ca.crt Click Advanced... near the bottom of the window. Under the General tab, check the box next to Use a TCP connection Click OK, then click Apply. Setup complete! How To Connect Click on the Network Manager icon in the panel bar. Click on VPN Connections Select BTGuard VPN The Network Manager icon will begin spinning. You may be prompted to enter a password. If so, this is your system account keychain password, NOT your BTGuard password. Once connected, the Network Manager icon will have a lock next to it indicating you are browsing securely with BTGuard.

  Read the article

• What are the reasons for putting a VPN into a network?

  - by Craig Johnston

  What are the reasons for putting setting up a VPN? Does it require a domain name?

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Way to wake up win-xp pc, without hibernate or network?

  - by crosenblum

  I have no need to wake up a remote pc, just the pc I use at work. I want to wake it up, by itself, without having to use hibernate, which I am not comfortable with, or have ever used. Then I can have the "System Scheduler" freeware that I use, to automatically do anti-virus updates, anti-malware updates, ccleaner /auto of course... It just would make my day's easier if it was already on by the time I arrived, I usually always turn my pc off when I am done with work, or if I didn't, I have a scheduled task to auto-shutdown pc 1 hour after my normal work hours... Without using hibernate, can i get my pc to wake up on it's own at a certain time each weekday?

  Read the article

• Exchange 2007 | Mailbox DB Size 180GB

  - by rihatum

  Hi All, I have a Exchange 2007 SP1 server running on Windows 2008 6 HD Drives in a RAID-1 OS, DB, Logs on separate RAID-1 Disks Size of the Mailbox Database is 183GB and increasing We only have First Storage Group and Second Storage Group There is no more space on the server to install new Physical Disks and create a Storage Group Q - Can I resize the RAID-1 Partition where the DB is ? Q - Any other suggestions as to how I can decrease the Mailbox DB Size ? Will be grateful for your suggestions on this. Kind Regards

  Read the article

• Problem connecting to Ubuntu Server in same local network.

  - by frbry

  I have my LAN set up as below: 192.168.2.1: ADSL Router (DHCP Range: 192.168.2.2-192.168.2.250) 192.168.2.254: Wireless Access Point 192.168.2.253: Ubuntu Server (Static IP) 192.168.2.2: My Laptop (Connects to Internet via the Wireless AP) NAT in router is active and set up to transfer requests made over port 80 to 192.168.2.253. Router's firewall is inactive. No IPs in DMZ. My friends get Apache's It Works page when they try to enter http://my_external_ip. But I get Router's configuration page instead of that. What should I check or do? Thanks.

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• What is the legality of ripping purchased DVDs to stream across your (private/home) network?

  - by th3dude19

  Seeing the 'is downloading a torrent of software you own illegal' thread, it made me think about this. Anyone have any answers? NOTE: SuperUser is NOT a legal resource and any advice/answers here should NOT be used in any way.

  Read the article

• SSH not working through Double NAT

  - by d_inevitable

  I am trying to setup port forwarding for ssh through 2 NATs The first Router translates my internet IP to my outer network (10.1.7.0). In the outer network there's a second Router that does NAT to my inner network (192.168.1.0). The target server is connected to both, the outer network and the inner network. I cannot change the port forwarding options for outer router. It is currently configured to forward the SSH and HTTP port to the router for the inner network. Internet + | v +-----------------+ +------------------+ | Outer Router | | Inner Router | |-----------------| |------------------| | | SSH HTTP | | +----+ +--------------------->| | | | | | | | | | | | | +-------+---------+ +------+---------+-+ | | | | | | | | | | | | | | +------------------+ | SSH | | | | Server | | | | | |------------------| | | | +-----------> |<-------+ | | | | |HTTP (testing) | +------------------+ | | | +------v------------------+ | | Outer Workstation | +-------------------+ | |-------------------------| | Inner Workstation| | | | |-------------------| | | | | |<----------------+ +-------------------------+ | | +-------------------+ When connecting from a outer workstation to the address of the inner router, then both SSH and HTTP work fine. When connecting from the internet to my public ip with HTTP, the connection works fine as well. However SSH just times out. Most likely because the reply is not routed back properly. I suspect its either because of the SSH itself, or because the server is connected to both, the inner and outer network. Any ideas how I could resolve this issue? The routes on the server are currently: ip route show default via 10.1.7.254 dev eth0 metric 100 10.1.7.0/24 dev eth0 proto kernel scope link src 10.1.7.1 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.2 Do I have to change this? If so how?

  Read the article

• How do I prevent internet access to a group of computers on my network?

  - by Kevin Boyd

  Well I have the following setup... Computer A , B and C are networked.... Computer A is connected to the internet, computer B and C are not setup for internet access currently but I guess its possible with some kind of setting they would eventually be able to access the internet and this is what I would like to prevent. In summary only A should have internet access while A and B and C should still be on intranet. Is this kind of config possible?, what kind of software or setup or tools would I need to achive this?

  Read the article

• Restoring file properties but not the complete files, from backup

  - by Jon

  While copying data from my old storage on a Linux computer to the new (linux-based) NAS, I accidentially failed with getting the properties (most important: the modify dates) along to the new location. I also continued to use/modify the files at the new location and hence, cannot just copy it all over again. What I would like to do is a diff between files in the old vs. the new storage, and for those being identical, restore the properties from Linux storage to the NAS storage files. Is there a clever way such as a script or a tool to do this? I could either run it on the Linux box or in worst case from a remote Windows computer. Grateful for any suggestions. /Jon

  Read the article

• Vmware player change dhcp server settings

  - by Tathagata

  I have a Windows Server 2003 running from a Vmware player on Win 7 box. The idea is to test Windows Deployment service in the virtual network. Is it possible to configure the vmware dhcp server with WDS related stuff(option 66, 67)? I found a few references where people were using the vnetlib.exe to start, stop the dhcp serverchange the subnet mask etc - but there's no info on how to get set the dhcp server options. DHCP config from the virtual network editor I do have the Workstation, without the license for it. In the Virtual network Editor, the DHCP settings for the network I'm using, only allows me to set the subnetmask, IP ranges and stuff like that. But not the dhcp options. DHCP server on the WDS server Authorizing the DHCP server in the guest WDS server fails. The VMware player can run its own dhcp server fro the virtual network with out any authorization from the Active directory - can I do the same, with Win dhcp server in the guest Win Server? ~~~~~ Can I authorize W2K8 DHCP server for private network, even when prohibited in enterprise network? says we have to run a third party dhcp server... :/.

  Read the article

• Recovering ZFS pool with errors on import.

  - by Sqeaky

  I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

  Read the article

• How Do I Enable CUPS Browsing Across A Network?

  - by David Mackintosh

  I have a CUPS server with two print queues defined. Once this was defined, all the CUPS clients on the same subnet could see the two print queues automatically, no problem. Now I have a collection of machines on a separate subnet, reachable from the first subnet by a router. How do I enable CUPS browsing on the second set of machines so that they can see the print queues defined on the first machine? Let's call the server A.B.C.7. The first subnet is A.B.C.0/24. The second subnet is A.B.D.0/24, and there is a router with arms on both networks.

  Read the article

• lenovo x1 carbon windows 8 frequent wifi disconnect issue

  - by hIpPy

  I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >