Search Results

Search found 13224 results on 529 pages for 'redirection errors'.

Page 255/529 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Spilled water on MS 4000 keyboard

  - by FreshCode

  I spilled some water on the left side of my Microsoft 4000 Ergonomic Keyboard xausing several keys to malfunxtion. Most started working again after leaving the keyboard upside down in a warm-air clothes dryer for an hour. I presume there is some lingering moisture whixh is xausing the keypress errors. Should i be worried about permanent damage and what xan I do to get the remaining keys baxk? Here is a list of broken/malfunxtioning keys, in xase it helps to pinpoint a solution: z, c (prints x), Right Shift, 7, 8, 9, 0 Delete, Page Up, Num-4, Num-5, Num-6, Num-(, Num-), Num-=

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• Cannot copy files from external USB HDD to computer

  - by Thomas Versteeg

  Hello I have a HDD disk connected with a USB converter to my computer. It consists of two partitions, the first one is mounted automatically and I can grab all the files from it, but the second one I have to mount manually as a root in the command line, if I try to open it with nautilus it gives an error. The drive where the problem is is drive sdb1, sdb2 has the same settings but works fine. I am using Debian Wheezy. This is the fstab: /dev/sdb1 /media/usb0 auto defaults,gid=disk,umask=0777 0 0 /dev/sdb2 /media/usb1 auto defaults,gid=disk,umask=0777 0 0 And when I try to copy the files with this command (as root) cp -vr /media/usb0/* /home/user/Videos/ I get these types of errors: cp: reading `/media/usb0/.lang/file.ext': Permission denied cp: failed to extend `/home/user/Videos/.lang/file.ext': Permission denied How can I at least copy the files to my main HDD? I don't need to adjust them I only need to copy them!

  Read the article

• Windows 7 admin denied access to taskmgr, system32 dir

  - by DotNet Zebra

  I have a Windows 7 (32-bit) box with 2 users, both admins (my wife and I are both developers). My admin account was created during Windows setup, hers was created later. Both accounts are in the same groups, yet we have VERY different permissions. In the beta and RC, both accounts worked identically (RC to RTM was a fresh install on this box, not an upgrade). I have a C:\bin folder with the sysinternals utilities and a bunch of other stuff. Running anything in there or in system32 just works on my account, on hers I get access denied errors (cannot access file or path). If I right click and try Run As Administrator, I still get the same thing!!!

  Read the article

• System information shown when booting Debian

  - by WebDevHobo

  When booting Debian, you'll see it printing a lot of information about the system variables and such. I don't really need to see all that, so I'd like to modify some scripts to make sure that on boot, it just does what it has to do, without printing it on the screen. Just something I fancy. Offcourse, still seeing errors would be nice. But that long slur of text, I could do without. I've tried looking it up, but I can't find documentation on this specific thing anywhere.

  Read the article

• How to set up memcached to use unix socket?

  - by alfish

  While I could use memcached on Debian to use the default 11211 port, but I've had great difficulty setting up unix socket, Form what I'v read, I know that I need to create a memcache.socket and add -s /path/to/memcache.socket -a 0766 To /etc/memcached.conf and comment out the default connection port and IP, i.e. -p 11211 -l 127.0.0.1 However, when I restart memcached I get internal server errors on Drupal site. I'm trying to implement unix sockets to avoid TCP/IP overhead and boost overal memcached performance, however not sure how much performance gain one can expect of this tweak. I appreciate your hints or possibly configs to to resolve this.

  Read the article

• Is it possible to upgrade PHP to 5.3 on a Centos Kloxo installation?

  - by Malachi

  I have a VPS running Centos with Kloxo on and I was wondering how I would upgrade the PHP to 5.3 - It's currently running 5.2.6. When I try and do a yum update I get the following errors: Resolving Dependencies --> Running transaction check --> Processing Dependency: libpq.so.4 for package: lxphp ---> Package postgresql-libs.i386 0:8.3.7-umask.7 set to be updated --> Finished Dependency Resolution lxphp-5.2.1-400.i386 from installed has depsolving problems --> Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) Error: Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. Any help would be greatly appreciated.

  Read the article

• How many hours of use before I need to clean a tape drive?

  - by codeape

  I do backups to a HP Ultrium 2 tape drive (HP StorageWorks Ultrium 448). The drive has a 'Clean' LED that supposedly will light up or blink when the drive needs to be cleaned. The drive has been in use since october 2005, and still the 'Clean' light has never been lit. The drive statistics are: Total hours in use: 1603 Total bytes written: 19.7 TB Total bytes read: 19.3 TB My question is: How many hours of use can I expect before I need to clean the drive? Edit: I have not encountered any errors using the drive. I do restore tests every two months, and every backup is verified. Edit 2: The user manual says: "HP StorageWorks Ultrium tape drives do not require regular cleaning. An Ultrium universal cleaning cartridge should only be used when the orange Clean LED is flashing." Update: It is now May 2010 (4.5 years of use), and the LED is still off, I have not cleaned, backups verify and regular restore tests are done.

  Read the article

• Out Of Memory Error - Magento

  - by robobobobo

  Ok normally I understand when my server is giving me out of memory errors, but this one has me stumped! I'm running a magento based site, with one or two plugins in it and the rest is pretty basic. The site runs and loads fine wiht no issues. However in the backend - Configuration - Payment Methods it gives me the following out of memory error Fatal error: Out of memory (allocated 39059456) (tried to allocate 85 bytes) in ########/Varien/Simplexml/Element.php on line 84 Now this is where I'm confused..it's allocated more than it tried to allocate? Am I correct there? So how is it running out of memory? My server has 6Gb ram, an SSD and 2 CPU's running WHM with a few other low traffic sites on it. I set my php memory limit to 100mb, 1000mb and finally unlimited but all to no avail! I'm completely lost here, would really appreciate some expertise on this Cheers

  Read the article

• APC Not Enabled (WHM on CentOS)

  - by gamerzfuse

  I know this questions has been beat to death, but I've read almost all the responses and it hasn't solved my issue. I installed APC (no noted errors), I told PHP.ini to enable it and I made sure I am running PHP in FastCGI with SuExec turned off. Still I have no go. PHP / suEXEC Configuration Default PHP Version (.php files) 5 PHP 5 Handler fcgi PHP 4 Handler none Apache suEXEC off Apache Ruid2 off php.ini Configuration Alternative PHP Cache apc.enabled Alternative PHP Cache apc.shm_segments Alternative PHP Cache apc.shm_size When I run the APC.php file I get this message: No cache info available. APC does not appear to be running.

  Read the article

• western digital caviar black. EXT4-fs error

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• memcached and IIS manager with windows 2008

  - by user64484

  I have memcached (c:\memcached) running on port 11211 and I have a problem configuring IIS manager I created a site in IIS manager binded to port 11211 and if I have memcached running and try and start the site it says "the process cant access the file because it is being used by another process" If I stop memcached and start the site in IIS (and enable directory browsing) I can access the directory structure http://localhost:11211 ok, if I then try and start memcached it errors with error 1053 "could not start the memcached server on local computer" I know I'm doing something fundamentally wrong here! just cannot figure out how I can use IIS and memcached together. [edit]I should add that I need other servers to be able to access memcached[/edit]

  Read the article

• Blue screen - BCCode: 7F

  - by Joe

  I've recently bought a refurbished Toshiba Satellite A660 11M and I get the blue screen of death appearing fairly frequently now, and I can't seem to work out why or how to prevent/cure it. Firstly I thought it was due to Zone Alarm from what I read on the net, but then I thought it was a memory issue after it crashed whilst I was running Memtest. But after I ran Memtest a second time, it completed without any errors... Here are my computer specs - Toshiba Satellite A660 11M 500 GB hard disk 4 GB RAM Windows 7 Premium Nvidia GeForce GT 330M and here is more info regarding the crashes I keep getting - Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional information about the problem: BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050033 BCP3: 00000000000006F8 BCP4: FFFFF80003040EC0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• Setting up Shibboleth to secure part of a website

  - by HorusKol

  I've installed the Shibboleth module for apache on Ubuntu 10.04 using aptitude to install libapache2-mod-shib2 as per https://groups.google.com/group/shibboleth-users/browse_thread/thread/9fca3b2af04d5ca8?pli=1 and enabled the module (I have checked in /etc/apache2/mods-enabled) I then proceeded to secure a directory on the server by placing a .htaccess file with the following directives: AuthType shibboleth ShibRequestSetting requireSession 1 Require valid-user Now - I haven't set up an SSL host yet - and I also haven't set up the IdP - but I would expect that the server would block access to this directory - but I'm getting the content without any problems. I have restarted the apache service and I have no errors in the log files.

  Read the article

• openldap proxied authorization

  - by bemace

  I'm having some trouble doing updates with proxied authorization (searches seem to work fine). I'm using UnboundID's LDAP SDK to connect to OpenLDAP, and sending a ProxiedAuthorizationV2RequestControl for dn: uid=me,dc=People,dc=example,dc=com with the update. I've tested and verified that the target user has permission to perform the operation, but I get insufficient access rights when I try to do it via proxy auth. I've configured olcAuthzPolicy=both in cn=config and authzTo={0}ldap:///dc=people,dc=example,dc=com??subordinate?(objectClass=inetOrgPerson) on the original user. The authzTo seems to be working; when I change it I get not authorized to assume identity when I try the update (also for searches). Can anyone suggest what else I should look at or how I could get more detailed errors from OpenLDAP? Anything else I can test to narrow down the source of the problem?

  Read the article

• Syntax of mac2vlan file in freeradius?

  - by Edik Mkoyan

  below is the content of mac2vlan file in freeradius When I uncomment this 00:01:02:03:04:05,VLAN1 it logs parsing error including configuration file /etc/raddb/modules/mac2vlan /etc/raddb/modules/mac2vlan[10]: Parse error after "00:01:02:03:04:05" Errors reading /etc/raddb/radiusd.conf what is the correct syntax? # -*- text -*- # # $Id$ # A simple file to map a MAC address to a VLAN. # # The file should be in the format MAC,VLAN # the VLAN name cannot have spaces in it, for example: # 00:01:02:03:04:05,VLAN1 # 03:04:05:06:07:08,VLAN2 # ... passwd mac2vlan { filename = ${confdir}/mac2vlan format = "*VMPS-Mac:=VMPS-VLAN-Name" delimiter = "," #}

  Read the article

• Are you aware of any client-side malware that sends lots of junk requests for .gifs?

  - by Matt Sherman

  I am getting dozens of 404 errors on my site that are requests for gif's with apparently random names, like 4273uaqa.gif and 5pwowlag.gif. I see that most of them are coming from one user. I assume something is happening in the background on her machine without her knowledge. I assume it's a malware thing on the client. Has anyone seen this behavior before? Would love to advise my customer that s/he has an issue. I'd also like to stop getting these 404 reports. :)

  Read the article

• strange behaviour - dhclient needs to be run twice in order to connect to wireless

  - by splicer

  I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

  Read the article

• How do you sync photos with your family?

  - by romkyns

  We've always been trying to share photos within our family, despite all living in different countries. This has been very challenging. We have about 50GB of photos that we share with each other. Everyone organizes them differently, so rsync/Syncplicity don't work. Everyone likes their photos on the fast hard drive rather than a slow website with reduced quality, so online sharing websites are a no-go. So far we have been essentially syncing them manually, via a shared folder that new photos are placed to and collected from. This is laborious and prone to errors, that usually leave one of us without all the photos without even knowing. To those who are in a similar situation, how do you solve this?

  Read the article

• What tools can be used to monitor a web application? Beyond "doesn't 404"

  - by Freiheit

  I have an internal web application that has recently gone through a major version upgrade. I would like to monitor this application over the weekend and look for 'soft' errors. I will still need to spot check things by hand, but there are some common failure patterns that I think I can automate. Examples include data with bad formatting, blank rows in tables (indicates missing non-critical data), patterns for identifiers ("TEST" means one of my devs left a testing feed on), etc. I think there are applications out there that can be scripted to do things like: 1. log in 2. Go to $URL 3. select 3rd link in $LIST or $PATTERN 4. Check HTML from that link for $PATTERNS 5. Email report Are these goals sane? What applications/tools can help with this?

  Read the article

• Write permission when mounting Windows shares from Ubuntu

  - by Ola Tuvesson

  I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,file_mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents, but when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file). What gives?

  Read the article

• DBD::mysql gives mysql_init not found

  - by highBandWidth

  I have to install a non-admin copy of mysql and perl module DBD::mysql in my home directory. I installed mysql in ~/software/db/mysql and this works since I can start and stop the server and go to the mysql prompt. Then, I downloaded the perl module and installed it using perl Makefile.PL PREFIX=~/myperl/ LIB=~/myperl/lib/lib64/perl5/ --mysql_config=/my_home/software/db/mysql/bin/mysql_config --libs=/myhome/software/db/mysql/lib/libmysqlclient.a make make install I did this to use the statically linked mysql client library. perl -MDBD::mysql -e 1 gives no errors. However, when I actually try to use the module, I get /usr/bin/perl: symbol lookup error: /myhome/myperl/lib/lib64/perl5/x86_64-linux-thread-multi/auto/DBD/mysql/mysql.so: undefined symbol: mysql_init

  Read the article

• Outlook 2010 + Move IMAP PST file = Outlook data file cannot be accessed.

  - by GWB

  I set up a new IMAP account in Outlook 2010. It works but creates IMAP PST file in C:\Users\User\AppData\Local\Microsoft\Outlook. I want the file on my data drive in D:\Users\User\Documents\Outlook Files (the same folder where outlook automatically creates the local Outlook PST. I followed the instructions here to move the IMAP PST. Testing the account (send/receive) works fine, but if I try to manually send an email I get error 0x8004010F Outlook data file cannot be accessed. I've tried repairing the PST using SCANPST (it always finds errors), and deleting and recreating the account but I get the same error. If I move the PST file back, it works again, but this is not ideal. Note: I don't think this is a duplicate of this question as the cause is different and the solution does not help.

  Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >