Search Results

Search found 30569 results on 1223 pages for 'computer problems'.

Page 256/1223 | < Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >

• Help! Installer crashing

  - by Mike

  I had ubuntu 12.04 installed on a Satellite l635. I wanted to start over with a fresh install because I had experimented with a bunch of different things, and computer was getting glitchy and random freezes. I used the same iso I used for original install, and it keeps say the installer crashed with a erron5 input/output error. Tried an older iso for 11.10 I had used in the past with same issue... To see if it was disc or computer (not a great idea) I tried the 12.04 iso on another laptop. Now I have 2 laptops with no os. Both discs however live boot on both systems. PLEASE HELP! I've searched forums and can't find the same problem.

  Read the article

• How can you tell whether to use Composite Pattern or a Tree Structure, or a third implementation?

  - by Aske B.

  I have two client types, an "Observer"-type and a "Subject"-type. They're both associated with a hierarchy of groups. The Observer will receive (calendar) data from the groups it is associated with throughout the different hierarchies. This data is calculated by combining data from 'parent' groups of the group trying to collect data (each group can have only one parent). The Subject will be able to create the data (that the Observers will receive) in the groups they're associated with. When data is created in a group, all 'children' of the group will have the data as well, and they will be able to make their own version of a specific area of the data, but still linked to the original data created (in my specific implementation, the original data will contain time-period(s) and headline, while the subgroups specify the rest of the data for the receivers directly linked to their respective groups). However, when the Subject creates data, it has to check if all affected Observers have any data that conflicts with this, which means a huge recursive function, as far as I can understand. So I think this can be summed up to the fact that I need to be able to have a hierarchy that you can go up and down in, and some places be able to treat them as a whole (recursion, basically). Also, I'm not just aiming at a solution that works. I'm hoping to find a solution that is relatively easy to understand (architecture-wise at least) and also flexible enough to be able to easily receive additional functionality in the future. Is there a design pattern, or a good practice to go by, to solve this problem or similar hierarchy problems? EDIT: Here's the design I have: The "Phoenix"-class is named that way because I didn't think of an appropriate name yet. But besides this I need to be able to hide specific activities for specific observers, even though they are attached to them through the groups. A little Off-topic: Personally, I feel that I should be able to chop this problem down to smaller problems, but it escapes me how. I think it's because it involves multiple recursive functionalities that aren't associated with each other and different client types that needs to get information in different ways. I can't really wrap my head around it. If anyone can guide me in a direction of how to become better at encapsulating hierarchy problems, I'd be very glad to receive that as well.

  Read the article

• debian (stable), google chrome, sencha and tranparency [closed]

  - by Kim Alders

  I am a bit unsure where to post this, but i guess it should be here, as it has to do with rendering in a browser. We have a sencha touch 1.1 application running in Google Chrome. On mij own computer (ubuntu) there are no problems. On the touch screen attached to a computer running debian-OS, transparency is shown as semi-transparent. It happens on sliders. Sliders have a button on them. This button is rendered bij sencha with CSS. It is NOT an image. Anyone has any idea how to get it 'nice' on debian too

  Read the article

• I can't login to facebook from any browser

  - by user92974

  I'm Using UBUNTU 12.04. I'm having problems with Facebook. It really hard to login. Takes like 3 or 5 min. At first I thought it was a flash problem but then I realized it could be some proxy's conf file. Other sites doesn't have problems. Yesterday I tried Tor-browser-bundle and I installed privoxy using this rules http://www.neilvandyke.org/privoxy-rules/ . Today I removed privoxy and the conf file with the Ubuntu software center and ubuntu-tweak. I don't really find the problem and my windows pc does not have any problem with the same modem. I don't have an ISP'S PROXY it just a direct Internet connection using automatic DHCP. Maybe I am missing something else. But I want to be sure so, I'm asking. PD: Sorry for my English I'm Argentinian.

  Read the article

• Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

  - by Steve

  I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

  Read the article

• HealthCare.Gov Fiasco

  - by jchang

  There will probably be consequences for delving into such a charged topic. But this has never stopped me before and I am too old to change my ways. So here goes. Many of us have of the problems with the online HealthCare.gov even though technical details are not yet available. First let me say that I am not singling out this particular project, as severe problems are common in government IT projects, and I suspect the incidence rate may be no different in private industry. Whereas other projects...(read more)

  Read the article

• What exactly does an installer do and why might I need one?

  - by Jan

  this is probably the noob-question of the day: So I've written this game. Now there's the .exe file that does the work, a folder with my beautiful, beautiful assets and a bunch of .dll files and other stuff that I probably shouldn't touch. To run the game, I copy the whole lot to the desired computer, double-click the .exe file and start shooting some dudes. Yay! But what exactly is the difference between that and using an installer? What else does an installer do besides copying files and looking more professional than a .zip-file? Is there generally a lot of patching/configuring involved when trying to make a game run on a different computer? I tested my game on all windows computers I could get my greedy fingers on and it works great. Thanks for your time.

  Read the article

• Move to Incorporate Computing in Math Curriculum

  Draft standard recommends making computer science part of high school mathematics education Education - Mathematics education - Math - Research - Teaching Resources

  Read the article

• 12.04 reboots rather than shutting down

  - by Luca

  I have a ruvo with a fresh installation of 12.04. When I try and shutdown the computer reboots. Until I upgraded (by doing a fresh install) I ran it with Ubuntu 10.04 and I didn't have this issue. I have tried sudo shutdown -h now sudo shutdown -P now sudo init 0 sudo poweroff All of these cause a reboot. I have added acpi=norq to my grub file as suggested by someone in the first post below. This is being used as a mythtv frontend and I would like the power button to shut it down. I have modified the button to perform a shutdown -h now, but this too causes a reboot. I have studied the posts below and tried some of these ideas, but with no luck so far. Why do I get a reboot instead of a shutdown? Ubuntu 12.04 not shutting down properly Stuck on reboot and shutdown Shutdown does not power off computer

  Read the article

• Google search preview shows content not on the website

  - by SDG

  My website google search entry is messed up. In the preview in google search results, I get things like cracks, serials, random ip addresses. I scanned all files and my computer for viruses and malware and could not find anything. I also tried to download and reupload all content from a friend's computer and still that content persists. I also scanned the source code of all files, but the content does not appear in any file. Google also does not detect any malware on the website, as seen in their webmaster tools. I have searched using the same keywords in other search engines such as bing and yahoo and the search results there are fine. I am quite clueless as to what the causes would be for this and what would be a possible remedy.

  Read the article

• Installing Ubuntu failed on Asus Laptop

  - by xiaohan2012

  I am trying to install Ubuntu Desktop 12.04 on my laptop. It just failed on the entry selection step(to select installation or try it first). However, when I tried it on my desktop computer, the installation went smoothly . I've thought of that and got a few clues. My Desktop computer had Window XP installed already, while my laptop has only got Linux(Fedora 14) Is there a laptop version of Ubuntu? And I just downloaded the wrong one? Thanks for any suggestion! PS: My laptop is ASUS K42J, RAM size is 2G. I am using liveusb to create the usb stick.

  Read the article

• My.Power Extension (VSX)

  A My Namespace extension that makes things such as shutting down your computer easier.

  Read the article

• 3D Chess (openGL) with Artificial Intelligence

  It is a 3D chess game.A game that can played between a computer and a human.

  Read the article

• 12.10 will not shut down

  - by rahi

  I recently installed 12.04 on an hp spectre xt ultrabook. I installed 12.04 from a USB. When the install was complete, and the computer restarted, I got a blank screen. After some searching, I found that I had to choose "acpi=off" during the installation, which now shows up in the grub screen. Once I was on 12.04, I upgraded to 12.10. The issue now is that when I hit shutdown, the computer hangs on a purple shutdown screen. Usually, at this point, I press the power button on the machine to completely power off the machine. I am new to ubuntu, and would appreciate the help. Thanks.

  Read the article

• wubi install of ubuntu 12.10 on hp dv6 6154tx causes uncontrolled heating, fan speed, low battery life

  - by kansi

  i have a hp dv6 6154tx with an integrated Intel GPU and a discrete ATI GPU (Radeon Mobility HD 6490M (1 GB DDR5)). -Problems: when i install ubuntu 12.10 using wubi, my laptop starts heating, fans start to run fast (to much of noise), and battery goes really low Any attempt to install catalyst drivers (from ati official site and also proprietary drivers) fails , as after reboot when i login everything is gone like no unity no desktop and sometimes black screen appears. even bumblebee and jupiter didnt help.... :( So PLEASE, PLEASE can somebody post the real solution to my problems i.e.(inc battery life and stop fan noise and heating). (i want to install ubuntu only using wubi)

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• Bad sound quality and headphones not working

  - by wifi

  Using Ubuntu 10.10, on a HP Pavilion t3019.es, which has a Realtek ALC880 soundcard. It has 6 rear jack outputs, plus digital audio input and output, plus 3 front jacks (mic, headphones and a blue one which i don't know what's for). The sound on my computer is very low, and when i raise the volume up to 50%, it starts sounding distorted, crackling. Also, the headphones don't work when i plug them (it just keeps on playing through the speakers). I tried to comment the "/etc/modprobe.d/alsa-base.conf" file according to the soundcard and jacks in my computer, but none of the lines added worked (naturally, didn't added them at once). I found out that adding "options snd-hda-intel model=generic" to it made the sound better, but it's not as good as in Windows yet. Any ideas? Other than setting the PCM value, didn't work for me. Thanks.

  Read the article

• No wireless after resuming from suspend?

  - by lapor

  When I resume my computer from suspend it doesn't want to connect to any wireless connection. It looks like it is connecting, but after a while it asks me to retype a password for wireless connection. It connect after I restart it. I am using Toshiba Satellite A210 and Ubuntu 10.10 (I have the same problem with 10.04 and 11.04 beta2. 14:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) Subsystem: Askey Computer Corp. Device 7128 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at cfcf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k Kernel modules: ath5k Should I file a bug?

  Read the article

• Accidentally deleted my windows 7 while installing ubuntu, trying to reinstall it

  - by user286874

  I had Windows 7 Ultimate on my desktop and I believe have downloaded the correct ISO file. I've been trying to use GParted and UNetbootin to create a bootable usb by formatting to FAT32, flagging the boot box, and writing to the flash drive with UNetbootin, but there have been problems. When I select my flash drive in the BIOS, it just reflashes the BIOS stock MSI picture 4 times then boots to Ubuntu anyway. Details: it's a new computer, self-built, hasn't shown any problems in the past, got Windows 7 through r/softwareswap so it's a MSDN file, the flash drive is a Sandisk U3 Cruzer, I uninstalled the bloatware when Iwas using Windows 7, but in the BIOS it still comes up as "Sandisk U3 Cruzer" I don't have a cCD/DVD drive. I dont care if I have to completely delete ubuntu in the process, I just need Windows 7 back by monday. I think the problem is because of the cruzer and am going to pick up a different flash drive today.

  Read the article

• Encrypted Ubuntu Partition HELP!

  - by user207984

  I had Zorin 7 Encrypted. I accidentally deleted important GRUB data trying to make more room in the boot folder i think? So the computer would no longer boot up. Anyways, I installed a second Linux OS on the same laptop, but I am unable to access all of my important information that is still on the encrypted partition. When i go to mount it to access everything, it asks for the encryption password... however, it tells me the password is incorrect, which I know 100% that it is the correct password. Someone please help me! Inform me how I can access this encrypted partition or restore the data so that I can boot the computer in Zorin 7 again.

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• Need Help with partitions and such Dual Booting 13.10 w/ windows 7

  - by Aymax

  so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

  Read the article

• Misused mke2fs and cannot boot into system

  - by surlogics

  I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

  Read the article

• Would it be practical/secure to import my GPG keys into (Open)SSH?

  - by InkBlend

  I know a bit about computer security, and well as about the concept of public and private keys. I also know that both GPG and (Open)SSH use the public/private key system. My question is, is there any reason that I would not want to use my GPG keys as authentication for SSH? Please note that, while a have a little bit more experience with Linux, GPG, and SSH than the average computer user, I am by no means an expert. Please be patient and point out any mistakes that you might see.

  Read the article

• Some problem about Compiz and GTK on Ubuntu 14.04

  - by LVHoanh

  I installed Ubuntu 14.04 on my computer : i3/4G/750G/VGA Intel HD3000 & 1GB NVidia with CUDA GT540M. I've some problems with Ubuntu 14.04 : Does Ubuntu 14.04 support Emerald Theme Manager? Emerald Theme Manager is not available in Ubuntu Software Center? I installed Compiz and Compiz Setting Manager, it works ok, but the Windows 3D plugin is not work? The Shutdown/Restart function on Right-Top Panel is not work, is there any solution for this problem? The mouse theme I installed only work in current session, next time i restart computer it change back to default mouse theme? How can i resize the spacing between Desktop Icon? Waiting for everyone respond. Thankyou so much. P/s : My English is not good, expect you understand. :)

  Read the article

< Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >