Search Results

Search found 22298 results on 892 pages for 'default'.

Page 256/892 | < Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >

• Primary/secondary ethernet interfaces in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local...

  Read the article

• umask seems to vary by user

  - by paullb

  I've got a development Ubuntu system for which I have several users: myself (with full sudo) and about 5 other users. (I've set up the system so everything in this respect is still at its default setting) I'm trying to set the system up so that multiple people can collaborate in a single directory by using grouing and I want the default permissions to be 664. However when some users edit files the permissions were 644. After a lot of investigating most users have a umask (checked at the prompt) of 0002 and when they create files they are 664 (as expected) but there are 2 (myself and one other) who have 0022 umask (so the files that come out are 644 and nobody else can write to them). I've looked everywhere but can't figure out why a couple users wind up with a different umask e.g. there is nothing the .bash_profile or anything like that) Any ideas for the source of the discrepancy? /etc/bashrc if [ $UID -gt 199 ] && [ "`id -gn`" = "`id -un`" ]; then umask 002 else umask 022 fi /etc/profile if [ $UID -gt 199 ] && [ "`id -gn`" = "`id -un`" ]; then umask 002 else umask 022 fi EDIT: My (bad) ~/.bashrc # .bashrc # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi # User specific aliases and functions export LANG=en_US.utf8 Other user (good) .bashrc # .bashrc # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi # User specific aliases and functions

  Read the article

• printer assignments for windows xp workstations within an active directory environment

  - by another_netadmin

  I'm using the following script to handle removing any old networked printers from machines and then assigning the propper ones and making one of them the default. This script is assigned to the OU the workstations reside in and uses group policy loopback so all users that login will get the appropriate printers mapped for them. I tried to use the new Printer Manager as part of W2K3 R2 but when assigning the default this way I get an error that the printer doesn't exist so I'm back to using the script. One flaw that I'm noticing is that it won't remove any printers that happen to be mapped from an RDP session (we don't see this everywhere but there are a few locations). Is there any way to enumerate all RDP printers and remove them similar to how I'm enumerating and removing networked printers? ' ' Printers.vbs - Windows Logon Script. ' RemovePrinters AddPrinters Sub RemovePrinters() On Error Resume Next Dim strPrinter Set objNetwork = WScript.CreateObject("WScript.Network") Set colPrinters = objNetwork.EnumPrinterConnections For i = 0 to colPrinters.Count -1 Step 2 strPrinter=CStr(colPrinters.Item(i+1)) If Not InStr(strPrinter,"\\") = 0 Then objNetwork.RemovePrinterConnection strPrinter, True, True End If Next End Sub Sub AddPrinters() On Error GoTo 0 Set objNetwork = CreateObject("WScript.Network") objNetwork.AddWindowsPrinterConnection "\\printers1\JH120-DELL5310" objNetwork.SetDefaultPrinter "\\printers1\Jh120-DELL5310" End Sub

  Read the article

• Sharepoint: authenticating users via forms authentication

  - by sbee

  My problem is the following(sharepoint Newbie) , i want to change the default zone from being a Windows Authenticated Zone to a Forms Authenticated Zone ,thereby forcing the site collection administrator to log in via forms authentication and not windows also the sharepoint users will be accesing the site internally my goal is to effectively replace windows authentication with forms authentication as my company does not have active directory installed. So far i have created an ASP Application that adds the users to the database,the database was created via the .Net Framework Asp tool(Asp reg_sql),however when i change the default zone to the AspNetSqlMembershipProvider(Forms) and attempt to add my site collection administrator via the Central admistrator, i get the following error "No Exact Match found" as shown on the screenshot. My inkling is that somehow the people picker is failing to read the users from the database but reasearch on correcting that thus far has proved fruitless. I have made all the relevant changes on the these sites(Central admin site,My test site & Add Users site) config files.Changes are the following(Membeship Provider,Connection String,People Picker) i left out the role provider for now as it is optional. Help on this would ge highly appreciated...

  Read the article

• How to configure my 404 response

  - by Evylent

  How would I be able to correctly redirect a person who visits my site to my 404 page? I have already created my 404.php file as: <!DOCTYPE html> <html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>Page not found | Twilight of Spirits</title> <link rel="stylesheet" href="http://forum.umbradora.net/template/default/css/404.css"> <link rel="icon" type="image/x-icon" href="/favicon.png"> </head> <body> <div id="error"> <a href="http://forum.umbradora.net/"> <img src="/forum/template/default/images/layout/404.png" alt="404 page not found" id="error404-image"> </a> </div> <div id="mixpanel" style="visibility: hidden; "></div></body></html> My .htaccess file is: ErrorDocument 404 http://forum.umbradora.net/404.php Now when I go to my site and enter a false link such as mack.php or total.html, I get this error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. Any ideas on how to solve this? I have tried switching from subdomain to my normal path, still get errors.

  Read the article

• Nginx: Loopback connection via PHP's getimage size crashes server (Magento's CMS)

  - by Alex

  We were able to trace down a problem that is crashing our NGINX server running Magento until the following point: Background info: Magento Backend has a CMS function with a WYSIWYG editor. This editor loads some pictures via a controller in magento (cms/directive). When we set the NGINX error_log level to info, we get the following lines (line break inserted for better readability): 2012/10/22 18:05:40 [info] 14105#0: *1 client closed prematurely connection, so upstream connection is closed too while sending request to upstream, client: XXXXXXXXX, server: test.local, request: "GET index.php/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL,,/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9024", host: "test.local" When checking the code in the debugger, the following call does never return (in ´Varien_Image_Adapter_Abstract::getMimeType()` # $this->_fileName is http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif` # $_SERVER['REQUEST_URI'] = http://test.local/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL list($this->_imageSrcWidth, $this->_imageSrcHeight, $this->_fileType, ) = getimagesize($this->_fileName); The filename requests is an URL to the same server which is requesting the script a link to a static .gif that is not existing. Sample URL: http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif When the above line executed, any subsequent request to the NGNIX server does not respond any more. After waiting for around 10 minutes, the NGINX server starts answering requests again. I tried to reproduce the error with a simple test script that only calls getimagesize() with the given URL - but this not crash. It simple leads to an exception saying that the URL could not be loaded (which is fine as the URL is wrong)

  Read the article

• PAM with KRB5 to Active Directory - How to prevent update of AD password?

  - by Ex Umbris

  I have a working Fedora 9 system that's set up to authenticate users via PAM - krb5 - Active Directory. I'm migrating this to Fedora 14, and everything works, but it's working too well :-) On Fedora 9, if a Linux user updated their password, it did not propagate to their Active Directory account. On Fedora 14, it is changing their A/D password. The problem is I don't want A/D to be updated. Here's my password-auth-ac: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 type= password sufficient pam_unix.so sha512 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so -session optional pam_systemd.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so I tried removing the line password sufficient pam_krb5.so use_authtok But then when attempting to change the Linux password, if they provide their A/D password for the authentication prompt, they get the error: passwd: Authentication token manipulation error What I want to achieve is: Allow authentication with either the A/D or Linux password (the Linux password is a fall-back for certain sysadmin users in case A/D is unavailable for some reason). This is working now. Allow users to change their Linux passwords without affecting their A/D passwords. Is this possible?

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• Cannot configure hostname keeps on changing after reboot CentOS 6 + nginx [on hold]

  - by The Wolf

  I just finished this tutorial I found online: http://www.unixmen.com/install-lemp-nginx-with-mariadb-and-php-on-centos-6/ Now, I am having trouble making a hostname, you can see the result at: http://www.intodns.com/busilak.com here are my confs /etc/hosts 127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4 # Auto-generated hostname. Please do not remove this comment. 198.49.66.204 host.busilak.com busilak.com host ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 /etc/sysconfig/network NETWORKING="yes" GATEWAYDEV="venet0" NETWORKING_IPV6="yes" IPV6_DEFAULTDEV="venet0" HOSTNAME="host.busilak.com" /etc/nginx/conf.d/default.conf server { #listen 80; #server_name host.busilak.com; #charset koi8-r; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } Question: Is there anything I should have done? I just want to use my domain: busilak.com as default domain for my server, such that when I open busilak.com it would point readily to my VPS ip address.

  Read the article

• 85 Hz on old/new driver looks the same like 75 Hz on previous one?

  - by jon

  I have old philips 107T5 CRT and Nvidia graphics card. I used old Nvidia driver (but it wasn't 'legacy' one when I installed it) for few years but recently I decided to install other Linux distribution. I used 75 Hz refresh rate and 1024x768 resolution on my previous distribution. After I installed the new distribution I had to install a Nvidia driver so I downloaded one from the Nvidia site (this time only legacy supported my card so I downloaded legacy and installed it). It wasn't automatically updating xorg.conf but I had my previous xorg.conf copy and I used it. When I run X I could only choose 85 and 75 Hz, 85 was checked as default. And now what shocks me: that default 85 Hz looks identically like 75 Hz on previous driver looked (at least to me). I tried 75 Hz out of curiosity and it's too bright, hurts, etc. But on the previous driver 75 Hz wasn't hurting my eyes. Why is it different? It's the same number after all, so it should always give the same results, right? That's my first question. Second question: Is 85 Hz OK for that monitor model? Would it break it? I tried to find the optimal refresh rate for this model but couldn't find it.

  Read the article

• Desktop appliciations are unable to launch my browser in Windows 8 [migrated]

  - by Alex Ford

  I have a fresh copy of Windows 8 Pro installed from MSDN. I have Google Chrome installed (stable channel) and it is set as my default browser. I even went into Control Panel Default Programs to ensure that Chrome had all its defaults. When other desktop applications try to launch my browser they always fail. For example, while trying to install the Android SDK for Windows the installer accurately detected that I did not have the JDK installed. It provides a friendly button to visit java.oracle.com. When pressing this button, nothing happens at all. You can see that here: http://youtu.be/XXL8GhuWWg0 If it were only that application that was having issues I wouldn't think anything of it but I have been encountering similar issues all over the place. Probably the most irritating one is when visual studio has updates; clicking the update button does nothing. http://www.youtube.com/watch?v=zwd1mn3TId0 You can see in that screencast that Visual Studio is not able to launch the browser no matter what I click. The update button doesn't do anything and neither do the two links in the update's description. Any suggestions? I'm assuming it's a Windows issue since it is happening in multiple applications.

  Read the article

• Packet flooding while configuring a Debian L2TP/IPSec client?

  - by Joseph B.

  I'm currently at my wits end trying to configure an L2TP over IPSec VPN connection on my Debian using openswan and xl2tp box connecting to a server of unknown configuration. I've managed to successfully establish the connection and everything appears to be working well until I attempt to set the VPN connection as my default route, at which point I see a massive flood of packets simultaneously being transmitted (on the tune of ~1.5 GB in about 2min) until the server drops my connection. Prior to this network traffic on all my interfaces is minimal. According to iftop the majority of this traffic appears to be coming out of port 12, although I can't seem to figure out how to finger a specific process. If I instead just route traffic destined for 74.0.0.0/8 through it I'm able to access Google's servers through the VPN without issue. My xl2tp.conf file is: [lac vpn-nl] lns = example.vpn.com name = myusername pppoptfile = /etc/ppp/options.l2tpd.client My options.l2tpd.client file is: ipcp-accept-local ipcp-accept-remote refuse-eap require-mschap-v2 noccp noauth idle 1800 mtu 1410 mru 1410 usepeerdns lock name myusername password mypassword connect-delay 5000 And my routing table looks like: Destination Gateway Genmask Flags Metric Ref Use Iface 10.5.2.1 * 255.255.255.255 UH 0 0 0 ppp0 10.0.50.0 * 255.255.255.0 U 0 0 0 eth0 10.50.0.0 * 255.255.0.0 U 0 0 0 eth0 10.0.0.0 * 255.255.0.0 U 0 0 0 eth0 192.168.0.0 * 255.255.0.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default * 0.0.0.0 U 0 0 0 ppp0 I'm seeing absolutely nothing in auth.log and syslog during this time and can't seem to find any other log files it might be writing to. Any suggestions would be appreciated!

  Read the article

• Vagrant VM Fails to Boot

  - by Rob Wilkerson

  I have a Vagrant environment that requires me to forward port 80 so I bring it up under sudo on an OS X machine. This has always been fine until I recently upgraded to Vagrant 1.2.2. Now it fails to boot. [default] Waiting for VM to boot. This can take a few minutes. [default] Failed to connect to VM! Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. Because I'm running under sudo, the machine never gets added to the Virtualbox GUI, but that's always been the case for this environment. I don't get any indication that there was a problem with the additions -- a potential source of this error, from what I've read. I can bring things up just fine if I change to using port 8080 on the host machine. I can't use the app, but the VM itself loads up and provisions nicely. As far as I can tell, the only thing that's changed is: I upgraded my Vagrant version I updated the project's Vagrantfile to use v2 syntax. Anyone have any idea what I might be missing? I thought I'd be able to find this pretty easily, but it's quickly becoming a very real problem.

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Is there any reason this cronjob would fail in cron, but not on the command line?

  - by Treffynnon

  I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

  Read the article

• Fix stubborn 'Setting locale failed.'

  - by user60129

  I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

  Read the article

• How to add a writable folder to the PHP document root on linux

  - by Ron Whites

  We are building an example bash script for our PHP TestCoverage Tool use on Linux. The development environment is Ubuntu 12.04_1 but we intend to have the linux example work across as many linux versions as possible without modification. The example linux script requires a variable be set to the PHP Document Root path and by default uses a small PHP example source to show the user how our GUI and text report shows the covered and uncovered PHP code areas. The linux script is also intended to be easily alterable by the user to automate the TestCoverage display of users PHP code. The problem we are having with Ubuntu 12.04 (any linux?) is that the PHP Apache2 document root is defined in /etc/apache2/sites-available/default as /var/www and /var/www is defaulted with "drwxr-xr-x" read only access. So in order to add our own folder as /var/www/SDTestCoverage we must change /var/www to "drwxrwxrwx" read-write access. So it seems our script (at least on Ubuntu) will need to ... 1. acquire and save the /var/www permissions then do .. 2. sudo chmod 777 /var/www (to make writable) 3. mkdir -p /var/www/SDTestCoverage (create our folder under the document root) 4. sudo chmod 777 /var/www/SDTestCoverage (make our subfolder writable) 5. and finally restore /var/www permissions Thanks and our Questions are .. 1. Is this the standard way (using Ubuntu) one adds a writable folder under the PHP Document Root? 2. Is this the most general purpose way one adds a writable folder under the PHP Document Root on other versions of Linux?

  Read the article

• RDP suggesting a user name when connecting to a server

  - by Neolisk

  Prior to Event X, RDPing to Server 2003 always caused the user name appear blank and Login to be enabled, so you could pick to which domain you would log in. For us it's either local or our domain. Since a recent Event X a domain + user name is being suggested for every server and it's not the most recently used user name. If you remove it manually from RDP dialog, it's still being pre-populated for you, and then at the next available opportunity it returns into General/User name option of RDP dialog. So user name field comes pre-populated and you cannot change to log in locally (only if you manually erase domain specifier - everything before \) - Log in to option is disabled by default. We did not do any changes to our domain or client machines, so I am suspecting some Windows update caused it (and this being Event X). Interesting fact - it does not consistently happen on all machines, and some can login to some servers fine, while other servers keep suggesting a default user name. What could be that Event X and is there a way to fix it? EDIT: I tried this - How to clear remote desktop connections history and specifically this part of it: reg delete "HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\UsernameHint" /f The problem still persists.

  Read the article

• Dual boot Windows 8 and Ubuntu 12.10 across a reboot

  - by AK4749

  My Setup: I have two separate SSDs, and each contains an independently bootable OS - W8 and U12.10. From my extremely limited knowledge, this means each has a functioning EFI partition(?). My default boot order (GA-Z68XP-UD3P mobo with UEFI firmware update) boots the UEFI partition containing windows first, but if I enter the BIOS I can select the "ubuntu" entry to successfully boot ubuntu. Both drives are GPT, and are EFI boots. What I want to do: Reboot Windows 8, re-enter W8 (this is happening now due to the default boot order). What I want to change, however, is to boot into Ubuntu if i reboot from ubuntu. Essentially, I would like to work within one OS unless I consciously choose otherwise. Normally, I would not even ask to something I thought was impossible, but... Why I think this is possible: When trying EasyBCD to add ubuntu to the W8 UEFI bootloader, I noticed an "iReboot" addon or something that allows you to select which OS to boot into from within the OS. Note that I ended up not using the NeoGrub entry to chain Ubuntu off the W8 bootloader because I couldn't get much help with it. Is this possible? Have I had too much coffee and gone insane? Thank you all for your time, AK

  Read the article

• Linux as a gateway (no NAT)

  - by Hugo

  I'm trying to configure a linux server as a gateway/router, but I can't get it to work, and all information I've managed to find is NAT-related. I have a public IP block for the gateway and devices behind it, so I want the gateway to simply route packets to the internet - again: no NATing! I've managed to get the gateway to access the internet successfully (that was just a matter of configuring the IP and GW), and the computers behind it can communicate with it. [EDIT: more info] This is actually an IPv6 block (2800:40:403::0/48) (but I've found that most utilities and instructions can be easily adapted from IPv4 to IPv6 with little hastle). The server has too ports: wan: 2800:40:403::1/48 lan: 2800:40:403::3/48 One of the computers behind it is connected to it via a switch; 2800:40:403::7/48 The wan interface on the server can ping6 www.google.com without issues. The lan interface on the server and the client can mutually ping each other without issues (as well as SSH, etc). I've tried setting the server as a default gateway for the client, with no luck: client # route -A inet6 add default gw 2800:40:403::3 dev eth1 server # cat /proc/sys/net/ipv6/conf/all/forwarding 1 I don't want any filtering/firewalling/etc, just plain routing. Thanks.

  Read the article

• Cisco AnyConnect VPN client - prevent connecting as work network

  - by Opmet

  From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

< Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >