Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 257/676 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • Goodbye my beloved Nexus One, hello Windows Phone 7

    - by George Clingerman
    Last night my wife’s Nexus One finally bit the dust. You may not know but I’ve been nursing her Nexus One one along for quite a while after her screen shattered. I was able to replace it on my own (go me!) but little quirks have been popping up and the phone was quickly deteriorating. Lately it’s been the power button. Wifey would often have to press the power button several times to get her phone to turn on and last night it just wouldn’t wake up again. I took it apart and tried my best to see if I could somehow make it live once again but no luck this time. It was finally ready to retire. We looked at first for a replacement phone for her but she wasn’t really seeing anything she liked. So I decided to make the ultimate sacrifice and offer up my much loved Nexus One and I would then get a new Windows Phone 7 device. I love T-Mobile for my service so my choices were immediately limited to basically just a single phone. The HTC HD7. I read reviews and they were all over the board from people loving to people hating the phone but I decided, hey, why not, let’s take this plunge. And I did. I’ve only had the phone for about two days now so below is my list of first reaction pros/cons. These are basically things I’ve missed or things I’ve noticed that I really like about my new Windows Phone. Cons: * No Google Talk – I used this a LOT on my Nexus. I’ve found an application called “Flory” but it’s just an ok substitute, not the same as the full featured GTalk I had on my Nexus. * Seesmic is limited– I loved the way Seesmic worked on my Nexus. It was my mobile twitter client of choice. Everything about it worked really well. On Windows Phone 7 it’s just ok. I don’t get notification of new tweets, it’s several clicks to even see a new tweet. It’s definitely got some more development before it has the same features as it did on my Nexus. * Buttons don’t give great feedback – I’d read this on the reviews about the HTC HD7 and I’m finding it true myself. Pressing the buttons on the side of the phone and the power button on the top is finicky and I have to be looking at my phone to make sure I actually got them to press. * Web browsing is slow – I’m not sure what’s up with this, I’m connected to my wireless network at my house but it’s noticeably slower on my WP7 device than my Nexus. I even switched back to verify and it’s definitely true. Retrieving tweets, hitting up the XNA forums and just general web activities are all much slower on my WP7. I can’t think of any reason this would be true but it almost seems like it’s not using my wireless for everything.   Pros: * It’s pretty – the phone is really gorgeous. I loved the form of my Nexus One by the HTC HD7 is just as pretty, maybe even prettier! It’s got a nice large, bright screen. It feels good in my hand. And it even has a little kickstand to set the phone up for movie watching. Definitely a gorgeous phone. * LIVE integration – I lost a lot of nice integration with Google services but I gained a lot of integration with LIVE services that I also use. Now I can see when I get new GMail messages AND Hotmail messages. And having the Xbox LIVE integration is admittedly cool as well. * Tile notification rock – The Windows Phone 7 commercials are TRYING to get this message out but they’re doing a really poor job of this. Tile notifications really do save you from your phone. I have a whole little mini-informational dashboard at a glance. I unlock my phone and at a glace I can see new IMs, new mail messages, software updates etc. All just letting me know in the tiles I have arranged. That’s pretty cool. * The interface works really well – I feel super hip and cool swiping and sliding things around on my Windows Phone 7. Everything works that way and it’s great and fast and really good looking. I’m all about me feeling cool. * I’m gaming more – I had gotten a few games on my Nexus One but there really weren’t a lot of good developers flocking to the service. Just browsing through the Windows Phone 7 marketplace I’m already seeing a ton of games I want to try and buy. And I sat down and bet Pixel Man 0 just yesterday on my phone. I’m already gaming more than I did on my Nexus One. * Netflix integration is fantastic - It works just like it does on my Xbox 360 and I love having this feature on my phone. * It’s basically a Zune – I’ve been taking my Zune to work and listening to music off of that while I code. I no longer need to take it with me, now I just sync songs onto my phone and it’s my new Zune. I freaking love that. One less device to carry around.   All in all my cons have really little to do with the phone (just the buttons and the web browsing) and more to do with the applications needing to catch up a bit to what I’m used to. And the Pros are things that ARE phone specific so I’m seeing that as a good sign that I’m going to be very happy with my Windows Phone 7. So Wifey is happy having her Nexus One again, I’m happy with my new Windows Phone 7. Life is good. Now I just need to make a game to pay for it….

    Read the article

  • disk space error, cant use internet

    - by James
    after trying to install drivers using sudo apt-get update && sudo apt-get upgrade, im faced with a message saying no space left on device, i ran disk usage analyzer as root and there was three folders namely, main volume, home folder, and my 116gb hard drive (which is practically empty) yet both other folders are full, which is stopping me installing drivers because of space, how do i get ubuntu to use this space on my hard drive? its causing problems because i cant gain access to the internet as i cant download drivers when i havnt got enough space, this happens every time i try it

    Read the article

  • Intel Centrino Wireless N 1000 doesn't work on a Lenovo Z560

    - by Timetraveler
    I upgraded my Ubuntu 11.04 to 11.10 and my Wifi has stopped working. I have a Lenovo Z560 that has Intel centrino wireless-N 1000. I have searched various threads having similar problems for a solution and have no success. The wlan0 is not even showing up in rfkill. Please help me find a solution. I am giving below the output of various debug commands. Thanks in advance. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" ----##uname -a Linux gurucharapathy-laptop 3.0.0-17-generic-pae #30-Ubuntu SMP Thu Mar 8 17:53:35 UTC 2012 i686 i686 i386 GNU/Linux ----##lspci -nnk | grep -iA2 net 05:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Kernel modules: iwlagn 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 ----##iwconfig lo no wireless extensions. eth0 no wireless extensions. ----##iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. ----##rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no ----##lsmod Module Size Used by rfcomm 38408 8 bnep 17923 2 parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 snd_hda_codec_hdmi 31426 1 snd_hda_codec_conexant 52460 1 uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec joydev 17393 0 snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 i915 509554 9 drm_kms_helper 32889 1 i915 snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28932 2 snd_pcm,snd_seq drm 196290 5 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mei 36466 0 mac80211 393421 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 13575 0 intel_ips 17753 0 btusb 18160 2 i2c_algo_bit 13199 1 i915 soundcore 12600 1 snd bluetooth 148839 23 rfcomm,bnep,btusb cfg80211 172427 1 mac80211 psmouse 63474 0 serio_raw 12990 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm sparse_keymap 13658 1 ideapad_laptop wmi 18744 0 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 2 libahci 25761 1 ahci r8169 47200 0 ----##nm-tool NetworkManager Tool State: asleep Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: r8169 State: unmanaged Default: no HW Address: 88:AE:1D:DE:5F:9C Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on ----##lshw -C network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d6400000-d6401fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:de:5f:9c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.0.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff

    Read the article

  • CodePlex Daily Summary for Monday, May 26, 2014

    CodePlex Daily Summary for Monday, May 26, 2014Popular ReleasesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 and 2013 - 1.1.0.0: Issues fixed in this build: 1. Works for CRM 2013 2. Lookup view not getting blockedSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesSimple Connect To Db: SimpleConnectToDb_v1: SimpleConnectToDb_v1CRM 2011 / CRM 2013 Form Helper: v2014.05.25: v2014.05.25 Added PhoneFormat & PhoneFormatAreaCode v2014.05.24 Initial ReleaseCreate Word documents without MS Word: Release 3.0: Add support for Sections, Sections Headers and Footers and right to left languages.Corporate News App for SharePoint 2013: CorporateNewsApp v1.6.2.0: Important note This version contains a major bug fix about the generic error "Request failed. Unexpected response data from server null" This error occurs on SharePoint Online only, following an update of the Javascript API after May 2014. If you have installed this application manually in your applications company catalog, you can download the CorporateNewsApp.app file in the zip archive and update it manually. If you have installed this application directly from the SharePoint Store, it ...DevOS: DevOS: Plugin-system added Including:DevOS.exe DevOS API.dll Files must be in the some folderTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...ConEmu - Windows console with tabs: ConEmu 140523 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》(c???)??“????”???????,???????????????C?????????。???????,???????????????????????. ??????????????????????????????????;????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.New ProjectsASP.Net MCV4 Simplified Code Samples: This project intended to simplify the same. In this project each task is implemented with minimum lines of code to reduces complicity.Calvin: net???CodeLatino by Latinosoft: A Modified version for codeShow -- Probably taking more than a month.freeasyBackup: A free and easy to use Backup Tool for everyone. Without any cloud restrictions. freeasyExplorer: A free and easy to use File Explorer for everyone.openPDFspeedreader: #spritz #pdfreader #speedreader PDF Editor to Edit PDF Files in your ASP.NET Applications: This sample application allows the users to edit PDF files online using Aspose.Pdf for .NET.SharePoint World Cup 2013: world cup 2014SSAS Long Running Query Performance Helper: This utility helps investigate long running multidimensional or mining queries in discovery, de-parameterization and re-parameterization back to source format.

    Read the article

  • Oracle ADF Mobile Video Series: Overview

    - by Michelle Kimihira
    Many of you have asked for some information around Oracle ADF Mobile which announced availability on October 22nd. Today's video is a quick 3 minute overview of what ADFMobile brings to the mobile application developer community.  Next Wednesday's video will show our enthusiastic developers how to create an ADF Mobile application and deploying to a device.   Additional Information Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • Error mounting an external HDD

    - by Slash
    I want to mount an external HDD.I have tried many things but still no success.When i try to mount it from Disk Utility i get this error: Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at tuxera.com/community/ntfs-3g-faq/#unprivileged

    Read the article

  • Live CD has black screen HP DV6

    - by Shaun Killingbeck
    Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

    Read the article

  • How can I make the function keys the default on a Logitech K760 Bluetooh keyboard?

    - by Chas. Owens
    I had hoped that solaar would help, but it seems to only work for the Logitech wireless devices that use Logitech's proprietary scheme. I have Bluetooth keyboard (K760). I know it can be told to use the function keys (rather than the media keys) by default because I can do it on under OS X with software from Logitech. Just remapping the keys won't work as F1, F2, and F3 are special in that they switch which Bluetooth device I connect to and the keys are not sent to the OS.

    Read the article

  • Flexible Keyboard starts too late

    - by user289237
    So I just managed to revive an old Windows XP machine that I am getting ready to format into Ubuntu 14.04. However the USB keyboard I have plugged in, powers down with the machine (obviously) but doesn't power up until the Windows loading screen (After my only chance to select boot device, for which I have a USB) It is really frustrating as this renders the f12 key useless and me stuck with a decade + 2 old machine. Thanks for any help :D

    Read the article

  • import mini DV films from Samsung digital cam VP-D353 [USB]

    - by bobo
    I tried to import mini DV films from my old video camera VP-D353 and it's not reconised by my lubuntu.( 12.04 ) I tried "DVGRAB" which should work but it doesn't. I Found this tutorial http://www.foscode.com/linux-minidv-usb-video-capture/ But it's just saying "waiting for dv" I don't really know what should I do now. Here what I've got for the camera when I write : sudo lsub Bus 002 Device 013: ID 04e8:120f Samsung Electronics Co., Ltd thanks

    Read the article

  • Friday Fun: Polar Tale

    - by Asian Angel
    In this week’s game you join a polar bear in his quest for a warmer place to live. At each stage of the journey you will encounter challenges that need to be overcome in order to continue the journey. Can you figure out the proper courses of action or will you become just another block of ice in the far, far north? How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

    Read the article

  • No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

    - by Nick
    I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

    Read the article

  • Shrink NTFS Windows 7 Partition with GParted

    - by user15961
    I am running a dual-boot system with Windows 7 and Ubuntu 10.10. Initially I allocated about 20GB for my Ubuntu partition; however, I quickly ran out of that space and am now looking to expand my partition. Currently my NTFS partition (450GB) has about 130GB of free space. I tried using GParted to shrink the partition but encountered the following error. I booted into windows so I could run chkdsk but the countdown freezes at 1 upon reboot. I tried multiple methods to resolve that issue but nothing seems to work. Finally I gave up, and now I just want to know what is the best way for me to force GParted to shrink the partition regardless of the errors. I don't really have anything important and I don't mind risking the data. I just don't want to wipe the entire NTFS partition because I don't have a Windows install CD and might require Windows later on for some programs. I tried using sudo ntfsresize but that spews out the same error as GParted... Any ideas? Check and repair file system (ntfs) on /dev/sda2 00:00:09 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 36944325 end: 976771119 size: 939826795 (448.14 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:09 ( ERROR ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2.0.0 (libntfs 10:0:0) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 481191318016 bytes (481192 MB) Current device size: 481191319040 bytes (481192 MB) Checking for bad sectors ... Checking filesystem consistency ... Cluster 63468 is referenced multiple times! Cluster 63469 is referenced multiple times! Cluster 63465 is referenced multiple times! Cluster 63466 is referenced multiple times! Cluster 63467 is referenced multiple times! Cluster 165621 is referenced multiple times! Cluster 165622 is referenced multiple times! Cluster 165623 is referenced multiple times! Cluster 165624 is referenced multiple times! ERROR: Filesystem check failed! ERROR: 9 clusters are referenced multiply times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired.

    Read the article

  • Google I/O 2010 - Building push applications for Android

    Google I/O 2010 - Building push applications for Android Google I/O 2010 - Building push applications for Android Android 201 Debajit Ghosh Are you building cloud based apps for Android but are wondering how you can avoid polling and enable push functionality? This session will introduce the new Android Cloud to Device Messaging framework, showing you how you can integrate compelling mobile alert, send-to-phone, and two-way push sync functionality into your Android apps. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 3 0 ratings Time: 56:28 More in Science & Technology

    Read the article

  • Why is my dual-boot Ubuntu partition showing up as a peripheral "root.disk"?

    - by Don
    I recently installed Ubuntu 12.04, which I had been booting from a usb key, as a dual-boot on my machine running Windows 7. From what I had read online while researching, I was prepared to have to shrink the Windows partition and all that. But I never had to - it really was just a few clicks here and there and it was installed. I'm still pretty confused about it, but whatever, it worked, and the two peacefully coexist on my machine, and I have broken things to fix before I worry about fixing unbroken things. So yesterday I got it in my head to look at my partitions (I was considering making an all new partition to install the Windows 8 Release Preview). What I saw confused me. Here's a screenshot of the disk utility. At this moment, there is nothing connected to my computer, and nothing in any of the optical drives/ports/card readers/etc. Can you help me figure out what's going on here? Don's Machine is, I believe, my Windows partition - that's the name I assigned my machine from Windows Explorer. PQSERVICE is from what I can find online also Windows, but having to do with backup. And SYSTEM REQUIRED, if I browse it in Ubuntu, is definitely something to do with booting, and I believe it is also Windows'. According to the sizes shown, those three together should use up my 500 GB HD. Then further down, as a "peripheral device", it lists that 31 GB disk. This is obviously my Ubuntu (Model:Linux Loop:root.disk), but why is it showing up as a peripheral? So, to sum up those questions and to add some more random ones I had: Why is Ubuntu showing up as a peripheral device? If the Windows sections take up all 500 GB, where does Ubuntu live? If I renamed the disk partitions, would my life become a nightmare (seriously - can I safely rename them)? Why didn't I have to resize the Windows partition in the first place? Would giving Ubuntu more space improve its performance (it hangs alot)? Is it possible to have a partition for each OS (Windows 7 & 8, Ubuntu), a partition for files, and a separate partition for backups? Is this towards the good or bad idea end of the spectrum? @Elfy, would that explain why it keeps hanging? I guess I'll backup my files, rip it out, and reinstall it correctly later on today.

    Read the article

  • Hard Drive Formatting and Unmounting Errors

    - by Lucas Carther
    I'm trying to format a hard drive using Ubuntu 11.10. Every time that I attempt to format it from the Disk Utility, I get the error saying the device is busy, and under details it says: /dev/sda1 is mounted Then when I try to unmount it from the disk utility, it shows that the operation has failed and says: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=70D6-1701 from /boot/efi

    Read the article

  • How to troubleshoot and tweek unreasonably slow wireless connection on Ubuntu?

    - by Leonid
    I've just acquired a USB F5D8053ed Belkin adapter and it is unreasonably slow. Details of how I installed the firmware and device driver is described in this AU Question. I believe there is either a problem with a driver or adapter itself that is preventing from using the full network quality. At the moment I can see that the my Windows laptop is perfroming at 30 x speed better than the Ubuntu desktop PC with Belkin. What are they ways to troubleshoot pure wireless network performance on Ubuntu?

    Read the article

  • PhotoNote WordPress Theme by WPZOOM

    - by Matt
    PhotoNote is the new photo and video WordPress theme from WPZOOM. This is a premium theme that offers a concise way to show your photos, videos & blog posts, and has a Responsive Layout which means that the theme will automatically resize to fit any screen resolution or device it is opened on. This is [...] Related posts:Notebook Multimedia WordPress Theme Beveled Premium WordPress Theme by Woothemes Genesis WordPress Theme Framework

    Read the article

  • udev hide partition in nautilus for specific user/group

    - by user64780
    I'm trying to hide a partition form a specific group of users in Ubuntu 12.04. I have created a new rule in /etc/udev/rules.d/99-hide-disk.rules with KERNEL="sda3",ENV{UDISKS_PRESENTATION_HIDE}="1" And this works for all users. I tried KERNEL="sda3",ENV{UDISKS_PRESENTATION_HIDE}="1",GROUP="adm",MODE:="0700 but the partition is still hidden. That changes the group and permissions on the device rather than the rule. How do I make the rule only apply to a particular group of users?

    Read the article

  • Oracle OpenWorld 2012 - What's New

    - by Cinzia Mascanzoni
    Oracle OpenWorld 2012 is now over. Here a summary of major announcements on Hardware and Technology. Oracle Unveils Expanded Oracle Cloud Services Portfolio Oracle Unveils New Partner Cloud Programs Oracle Announces Latest Release of Oracle Exalogic Elastic Cloud Oracle Announces Oracle Exadata X3 Database In-Memory Machine Oracle Outlines Opportunity to Transform Industries from Device to Data Center with Embedded Java Oracle Announces Oracle Solaris 11.1 Latest Release of Oracle Exalytics In-Memory Machine Software Enables Customers to View and Analyze Data at the Speed of Business New Release of Oracle Business Intelligence Enables Users to Quickly Access and Analyze Key Business Information, Anytime, Anywhere

    Read the article

  • How to track vehicles with GPS and have that data available for an app

    - by Blaz Art
    What type of hardware and software architecture would you recommend for the task of somehow tracking a vehicle for the convenience of the app user to know where the vehicle is? I realize there are many ways to do it, but all them I think have to include this (correct me if im wrong) a gps tracking device inside the vehicle a way transmitting the gps location to a server from within the vehicle a server which tells the apps the locations of the vehicle the app

    Read the article

  • Kindles Come to Classroom in Ghana

    <b>Wired:</b> "Take Ghana, West Africa, for example. If you are a school in a small village with satellite internet and solar power, what device would be best for you? The power-sucking, data-heavy iPad, or the Kindle..."

    Read the article

  • Any ideas on reducing lag in terrain generation?

    - by l5p4ngl312
    Ok so here's the deal. I've written an isometric engine that generates terrain based on camera values using 2D perlin noise. I planned on doing 3D but first I need to work out the lag issues I'm having. I will try to explain how I am doing this so that maybe someone can spot where I am going wrong. I know it should not be this laggy. There is the abstract class Block which right now just contains render(). BlockGrass, etc. extend this class and each has code in the render function to create a textured quad at the given position. Then there is the class Chunk which has the function Generate() and setBlocksInArea(). Generate uses 2D perlin noise to make a height map and stores the heights in a 2D array. It stores the positions of each block it generates in blockarray[x][y][z]. The chunks are 8x8x128. In the main game class there is a 3D array called blocksInArea. The blocks in this array are what gets rendered. When a chunk generates, it adds its blocks to this array at the correct index. It is like this so chunks can be saved to the hard drive (even though they aren't yet) but there can still be optimization with the rendering that you wouldn't have if you rendered each chunk separately. Here's where the laggy part comes in: When the camera moves to a new chunk, a row of chunks generates on the end of the axis that the camera moved on. But it still has to move the other chunks up/down in the blocksInArea (render) array. It does this by calculating the new position in the array and doing the Chunk.setBlocksInArea(): for(int x = 0; x < 8; x++){ for(int y = 0; y < 8; y++){ nx = x+(coordX - camCoordX)*8 ny = y+(coordY - camCoordY)*8 for(int z = 0; z < height[x][y]; z++){ blockarray[x][y][z] = Game.blocksInArea[nx][ny][z]; } } } My reasoning was that this would be much faster than doing the perlin noise all over again, but there are still little spikes of lag when you move in between chunks. Edit: Would it be possible to create a 3 dimensional array list so that shifting of chunks within the array would not be neccessary?

    Read the article

  • Lost network interface after mac change

    - by Arturo Grc
    I'm using Ubuntu server 12.04 inside Virtualbox and everything was working as expected, but since I changed the mac address in Virtualbox network settings the network interface is not being recognized on Ubuntu. I don't remember the old mac address and everytime Ubuntu starts shows waiting for network configuration when I use ifconfig only appears lo (loopback device) and eth0 is lost, how can I fix this problem?

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >