Search Results

Search found 22456 results on 899 pages for 'computer behavior'.

Page 257/899 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • Remote desktop to multiple windows machines on a LAN with dynamic IP

    - by kevyn
    Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

    Read the article

  • USB keyboard not working under Windows 7 x64?

    - by Comboo
    I have two USB keyboards, one no-name cheap thing and an old Logitech. When I plug them in to my computer they pop up in Device Manager as an "Unknown device" and "USB-receiver", respectively. Both of them fail to install any drivers, neither automatically or through Windows Update. Both keyboards work perfectly on another computer I have with Windows Vista 32-bit. Can this be one of those cases where a device does not work in a 64-bit version of Windows? I doubt it though since I've never had that problem before with any device and I thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing the USB port, etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over USB? There is nothing written on it.

    Read the article

  • Program can't start because dll is missing

    - by Kruug
    Any executable that I attempt to run on this laptop pops up an error stating The program can't start because LPK.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried doing regsvr32 lpk.dll from within system32, but that returns the error The module "lpk.dll" was loaded but the entry-point DLLRegisterServer was not found. Make sure that "lpk.dll" is a valid DLL or OCX file and then try again. I was able to copy the DLL file from a working computer, but I get the same issue. How would I go about registering this DLL? Or, alternatively, which program would I have to reinstall to get the DLL to work again? The system is Windows 7 Professional 64-bit with Service Pack 1. I would really like not to reinstall the OS, but at this point, I'm about ready to.

    Read the article

  • Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

    - by Sulliwane
    I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

    Read the article

  • How do I uninstall GRUB?

    - by ændrük
    A hard drive that I use only for data storage still has GRUB from past Ubuntu installations. How can I remove GRUB from it without harming the rest of the drive's data? Background I occasionally move the data drive between computers with various boot order configurations, so I would like it to be non-bootable in order to avoid having to accommodate it in each computer's BIOS settings. When I power on a computer while only the data drive is attached, the following appears: error: no such device: fdf38dd4-9e9d-479d-b830-2a6989958503. grub rescue> I can confirm from old backups of /etc/fstab that this was the UUID of a root partition that I recently reformatted and which no longer exists. Here's the the data drive's partition table and raw master boot record. Please note that I'm not interested in workarounds that don't answer my primary question. I can think of several ways to work around this issue, but it bothers me on principle that I don't know how to directly resolve it. Every installation procedure should have a counterpart uninstallation procedure.

    Read the article

  • Avoid cache overflow in Atempo LiveBackup

    - by Vebjorn Ljosa
    When attempting the initial backup of a new client, Atempo LiveBackup seems to require a very large cache. For instance, a 20 GB cache is not enough to back up a computer that has 100 GB of data. It appears that LiveBackup is adding new files to the cache at a faster rate than it can send them to the server. When the cache fills up, the backup fails. Aside from removing most data from the computer and then add them back gradually after the initial backup, is there a good workaround? Is it possible to make LiveBackup slow down its scan so as to not fill the cache? Or is it possible to place the cache on an external drive?

    Read the article

  • Using Content Analytics for More Effective Engagement

    - by Kellsey Ruppel
    Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

    Read the article

  • Self-imposed lockout from program

    - by Alex
    I'm plagued with a lack of willpower. I recently started looking for solutions, and came across a program for macs called SelfControl which completely blocks one's access to a given set of websites for a given period of time (you can delete the program/restart your computer/do almost anything and it will still block those sites for the specified time period, and doesn't require a password to do it.) Unfortunately, there are no windows analogues. The one that comes the closest is Cold Turkey. It has the functionality whereby you set a time in the future, specify a list of websites (or programs - eg explorer, firefox, chrome) and you are blocked from accessing them for the whole duration. No password can undo it, no system reboot, etc. The problem is that the program is a buggy piece of garbage, and in order to ensure that you're not locked out from websites forever, you have to run an uninstaller which is just an exe file accessible at any time which completely defeats the purpose of a self-imposed program lockout. I want to make a better version of that program, or find a simple way to prevent access to a given set of programs over a given period of time with no way around it. I've only taken a few introductory courses in java (math major), but the internet is really having a negative effect on my studies, and the only way I can do work is to eliminate all distractions. What do I need to learn in order to make a program with the following properties: Given a set of .exe files, and a time in the future , this program will prevent access to the given .exe files until current time = given time restarting the computer doesn't interfere with the program, one can't uninstall the program until current time = given time, one can't create another instance of the program to block itself I don't care how much programming knowledge i need to acquire in order to make this program, so please give me a specific list of things that I need to study in order to make this happen, or if something like this exists, then please let me know.

    Read the article

  • TCP > COM1 for receiving messages and displaying on POS display pole

    - by JakeTheSnake
    I currently have a Java Applet running on my web page that communicates to a display pole via COM1. However since the Java update I can no longer run self-signed Java Applets and I figure it would just be easier to send an AJAX request back to the server and have the server send a response to a TCP port on the computer...the computer would need a TCP COM virtual adapter. How do I install a virtual adapter to go from a TCP port to COM1? I've looked into com0com and that is just confusing as hell to me, and I don't see how to connect any ports to COM1. I've tried tcp2com but it doesn't seem to install the service in Windows 7 x64. I've tried com2tcp and the interface seems like it WOULD work (I haven't tested), but I don't want an app running on the desktop...it needs to be a service that runs in the background. So to summarize how it would work: Web page on comp1 sends AJAX request to server Server sends text response to comp1 on port 999 comp1 has virtual COM port listening on port 999, sends data to COM1 pole displays data

    Read the article

  • I have been told to accept one error with Memtest86+

    - by DustByte
    Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

    Read the article

  • Windows XP Blue-Screens And Reboots Instantly On Boot-Up

    - by ashes999
    My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

    Read the article

  • hardware: delay and distinct 'click' before hard drive access

    - by matt lohkamp
    I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

    Read the article

  • Internet problems

    - by dan
    I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

    Read the article

  • How To Use the Restore Partition to Break Into a Mac Running OS X Lion

    - by Justin Garrison
    It’s trivial to break into a Mac using an OS X boot disk, but new Macs use a restore partition for OS installations. Here’s how you can use that partition to reset a user password and break into a Mac. All laptops that come with OS X 10.7 “Lion” or laptops that were upgraded to Lion have a restore partition for easy OS recovery. This easy-to-use recovery partition also opens up hackers to break into your Mac without needing any additional tools. To reset a user password on a Mac with Lion you first need to restart the computer and hold the Command+R (?+R) keys. When the gray Apple logo shows up on the screen you can release the keys. Your computer should automatically boot into the recovery partition. Start by selecting your language and then go to Utilities -> Terminal in the menu. How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

    Read the article

  • Verizon Fivespot firewall

    - by Patrick
    I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

    Read the article

  • Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

    - by Lynn
    This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

    Read the article

  • Ubuntu won't log in after update

    - by Dave M G
    I just updated Ubuntu about 15 minutes ago on my desktop which is running 12.04. Within the set of updates, there were some kernel upgrades. It didn't say I needed to reboot after the update was finished, but I thought I would anyway. The computer successfully rebooted up to the login screen. However, after entering my password, the screen goes black for a moment, then it comes back to the login screen. I tried the suggestions in this question, but unfortunately they didn't help. In the accepted answer, the questioner vaguely says it was a "Unity problem". I'm using Gnome-classic with full Compiz effects. I tried uninstalling and reinstalling Compiz, but that didn't fix anything. So... I can't use my desktop computer until this is fixed. I hope there is some help soon. I've uploaded the output of cat /var/log/Xorg.0.log to Pastebin. A temporary solution of changing to gdm instead of lightdm was found with help in the chat room.

    Read the article

  • PC cannot see Clonezilla server when using PXE Boot

    - by r2b2
    Hi I have about 15 workstations, all have the same hardware specs so I figured clonezilla is perfect for cloning them. So I followed everything this guide says :cloning groups of school computers That guide above makes it all look easy but when I tried setting up Clonezilla Server Edition on my laptop (Kubuntu 10.10) and configured the master computer for PXE boot, the master computer could not see the Clonezilla server. It just shows 'DHCP...' which seems it trying to grab an IP address but to no avail. Please help. Thanks!

    Read the article

  • Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

    - by Chris
    We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

    Read the article

  • Windows XP Activation Issues

    - by David
    Related to my older question: Get xp product key from boot Thanks for the help on that one. So, in the end, i couldn't get into my harddrive because i didn't have the available hardware to hook it up to another computer to get the old activation key. So, instead, i entered another activation key (i know, naughty) in hopes that there would be a way to retrieve the old one, restore point or something afterwords. What legal ways can I get xp re-activated after a repair when I don't have any record of my activation key? for those who think im just trying to crack it, your wrong: Got a virus, which stopped me from getting into windows Got AVG Anti Virus, which stopped me from getting into safe mode Got a 2 year old, who decided to rip-off and chew my activation sticker on my computer (nice one). Repaired windows installation thinking i wouldn't be asked to re-enter the activation key, to find that i was.

    Read the article

  • Keyboard-Shortcut driffen Utility to move windows around on multiscreen setup

    - by Wolfgang Fahl
    I am looking for a utility to move windows around on a multiscreen (usualy dual screen) setup. So with a keybord shortcut (or mousclick) I would like to send a windows to another monitor. I am using this functionality a lot when I give presentations. I'll lookup something on my mainscreen and then send the window to the screen or beamer where others can see it. Its also useful when working or when I want to send a screen from my computer to the TV screen that is hooked up to the computer. I know two solutions for a) Windows b) Mac OS but none yet for Linux. I'll post my windows and Mac OS solutions as answer and would be interested in other opinions.

    Read the article

  • Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

    - by aceinthehole
    If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

    Read the article

  • Conflicts with MS Office temporary files when using Offline Folders on Vista

    - by Tambet
    We are using Offline Folders feature of Windows Vista to make files on network shares available when out of office. Mostly it is working, but every time I do a sync I get a lot of such errors: D500E7B8.tmp - A file was deleted on this computer and changed on the server while this computer was offline. There are hundreds of them. I always select all of them and choose resolution "Delete from both locations". But what is causing this and how can I avoid it? I suspect the reason is that we are using Debian and Samba (3.4.7) on our file server. I've been looking for some Samba options that would cure this, but with no success. I learned that probably the cause is, that both Word and Excel are using specific pattern to change files - they never change the original file, but instead always write a new temporary file and rename it to original file, when you click Save. This is documented here: http://support.microsoft.com/kb/211632/?FR=1.

    Read the article

  • Frame rate upsampling codec/player/software?

    - by djechelon
    Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >