Search Results

Search found 13119 results on 525 pages for 'tcp ip'.

Page 257/525 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • iptables secure squid proxy

    - by Lytithwyn
    I have a setup where my incoming internet connection feeds into a squid proxy/caching server, and from there into my local wireless router. On the wan side of the proxy server, I have eth0 with address 208.78.∗∗∗.∗∗∗ On the lan side of the proxy server, I have eth1 with address 192.168.2.1 Traffic from my lan gets forwarded through the proxy transparently to the internet via the following rules. Note that traffic from the squid server itself is also routed through the proxy/cache, and this is on purpose: # iptables forwarding iptables -A FORWARD -i eth1 -o eth0 -s 192.168.2.0/24 -m state --state NEW -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE # iptables for squid transparent proxy iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 How can I set up iptables to block any connections made to my server from the outside, while not blocking anything initiated from the inside? I have tried doing: iptables -A INPUT -i eth0 -s 192.168.2.0/24 -j ACCEPT iptables -A INPUT -i eth0 -j REJECT But this blocks everything. I have also tried reversing the order of those commands in case I got that part wrong, but that didn't help. I guess I don't fully understand everything about iptables. Any ideas?

    Read the article

  • CentOS iscsi initiator has session but there is no block device

    - by jcalfee314
    I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

    Read the article

  • how to debug when xinetd says : got signal 17 (child exited)

    - by Faizan Shaik
    I am trying to start services vsftpd and sshd using xinetd. my config files are as follows. /etc/xinetd.conf defaults { instances = 60 log_type = FILE /var/log/xinetdlog log_on_success = HOST PID log_on_failure = HOST cps = 25 30 only_from = localhost } includedir /etc/xinetd.d /etc/xinetd.d/ftp service ftp { disable = no server = /usr/sbin/vsftpd server_args = -l user = root socket_type = stream protocol = tcp wait = no instances = 4 flags = REUSE nice = 10 log_on_success += DURATION HOST USERID only_from = 127.0.0.1 10.0.0.0/24 } /etc/xinetd.d/ssh service ssh { disable = no log_on_failure += USERID server = /usr/sbin/sshd user = root socket_type = stream protocol = tcp wait = no instances = 20 flags = REUSE only_from = 127.0.0.1 10.0.0.0/24 } Even though i've included only_from attribute, vsftp server as well as ssh server are refusing connection from localhost. while vsftp and ssh servers are working fine individually when i check with "service vsftpd start" and "service ssh start". when i did debug using "xinetd -d" throug terminal i got the output as 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ftp 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ssh 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} mask_max = 8, services_started = 2 13/10/20@00:06:08: NOTICE: 3592 {main} xinetd Version 2.3.14 started with libwrap loadavg options compiled in. 13/10/20@00:06:08: NOTICE: 3592 {main} Started working: 2 available services 13/10/20@00:06:08: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {server_start} Starting service ftp 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3607 {exec_server} duping 9 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {check_pipe} Got signal 17 (Child exited) 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = 3607 13/10/20@00:06:16: DEBUG: 3592 {server_end} ftp server 3607 exited 13/10/20@00:06:16: DEBUG: 3592 {svc_postmortem} Checking log size of ftp service 13/10/20@00:06:16: INFO: 3592 {conn_free} freeing connection 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = -1 both services are getting started but neither of them is working. after banging for 3-4 hours i still don't have any clue about this error. Any help would be appreciated. thanks!

    Read the article

  • ports only available from the outside network

    - by ChrisJ
    This is a counter-intuitive problem for me. I have a new Win 2003 server on a static IP address w.x.y.z. Tomcat 7, PostgreSQL 9.1, and Subversion are installed. All of it appears to be working fine from the server itself. We can also access the Tomcat manager, web applications, and run "svn ls svn://w.x.y.z/" from outside our network. However, when I try from another machine in the office, phpPgAdmin and svn cannot establish connections with the server. http://w.x.y.z:5432/phppgadmin cannot connect. The svn command from above returns: svn: E730061: Unable to connect to a repository at URL 'svn://w.x.y.z/' svn: E730061: Can't connect to host 'w.x.y.z': No connection could be made because the target machine actively refused it. Tomcat manager and the other web apps we have deployed work fine. Netstat -a from the server shows this: Proto Local Address Foreign Address State TCP SERVERNAME:3690 SERVERNAME:0 LISTENING TCP SERVERNAME:5432 SERVERNAME:0 LISTENING Windows Firewall was off, but just in case I also tried to enable it and open ports 3690 (svn) and 5432 (postgres). No change. I don't have access to the router/switch because it just doesn't work that way in Port-au-Prince and our sysadmin is on R&R. Is there anything that might be causing the problem from the server side?

    Read the article

  • iptables rules to allow HTTP traffic to one domain only

    - by Emily
    Hi everyone, I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

    Read the article

  • Preventing DDOS/SYN attacks (as far as possible)

    - by Godius
    Recently my CENTOS machine has been under many attacks. I run MRTG and the TCP connections graph shoots up like crazy when an attack is going on. It results in the machine becoming inaccessible. My MRTG graph: mrtg graph This is my current /etc/sysctl.conf config # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 1 # Controls whether core dumps will append the PID to the core filename # Useful for debugging multi-threaded applications kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 # Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_syncookies = 1 net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_max_syn_backlog = 1280 Futher more in my Iptables file (/etc/sysconfig/iptables ) I only have this setup # Generated by iptables-save v1.3.5 on Mon Feb 14 07:07:31 2011 *filter :INPUT ACCEPT [1139630:287215872] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1222418:555508541] Together with the settings above, there are about 800 IP's blocked via the iptables file by lines like: -A INPUT -s 82.77.119.47 -j DROP These have all been added by my hoster, when Ive emailed them in the past about attacks. Im no expert, but im not sure if this is ideal. My question is, what are some good things to add to the iptables file and possibly other files which would make it harder for the attackers to attack my machine without closing out any non-attacking users. Thanks in advance!

    Read the article

  • Correctly setting up UFW on Ubuntu Server 10 LTS which has Nginx, FastCGI and MySQL?

    - by littlejim84
    Hello. I'm wanting to get my firewall on my new webserver to be as secure as it needs to be. After I did research for iptables, I came across UFW (Uncomplicated FireWall). This looks like a better way for me to setup a firewall on Ubuntu Server 10 LTS and seeing that it's part of the install, it seems to make sense. My server will have Nginx, FastCGI and MySQL on it. I also want to be allow SSH access (obviously). So I'm curious to know exactly how I should set up UFW and is there anything else I need to take into consideration? After doing research, I found an article that explains it this way: # turn on ufw ufw enable # log all activity (you'll be glad you have this later) ufw logging on # allow port 80 for tcp (web stuff) ufw allow 80/tcp # allow our ssh port ufw allow 5555 # deny everything else ufw default deny # open the ssh config file and edit the port number from 22 to 5555, ctrl-x to exit nano /etc/ssh/sshd_config # restart ssh (don't forget to ssh with port 5555, not 22 from now on) /etc/init.d/ssh reload This all seems to make sense to me. But is it all correct? I want to back this up with any other opinions or advice to ensure I do this right on my server. Many thanks!

    Read the article

  • OpenVPN Keeps Crashing

    - by Frank Thornton
    Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28523 [vpntest] Peer Connection Initiated with [AF_INET]<MY_IP>:28523 Oct 20 21:00:44 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 MULTI_sva: pool returned IPv4=10.8.0.6, IPv6=(Not enabled) Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1576', remote='link-mtu 1376' Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1332' Oct 20 21:00:45 sb1 openvpn[2082]: <MY_IP>:28522 [vpntest2] Peer Connection Initiated with [AF_INET]<MY_IP>:28522 Oct 20 21:00:45 sb1 openvpn[2082]: vpntest2/<MY_IP>:28522 MULTI_sva: pool returned IPv4=10.8.0.10, IPv6=(Not enabled) Oct 20 21:00:46 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 send_push_reply(): safe_cap=940 Client File: client dev tun proto tcp remote <IP> 443 resolv-retry infinite nobind tun-mtu 1500 tun-mtu-extra 32 mssfix 1410 persist-key persist-tun auth-user-pass comp-lzo SERVER: port 443 #- port proto tcp #- protocol dev tun tun-mtu 1500 tun-mtu-extra 32 reneg-sec 0 #mtu-disc yes mssfix 1410 ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem plugin /etc/openvpn/openvpn-auth-pam.so /etc/pam.d/login #plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Comment this line if you are using FreeRADIUS #plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment this line if you are using FreeRADIUS client-to-client client-cert-not-required username-as-common-name server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" keepalive 3 30 comp-lzo persist-key persist-tun What is causing the VPN to keep dropping the connection and then reconnecting?

    Read the article

  • Not getting gigbit from a gigabit link?

    - by marcusw
    I just upgraded my LAN to gigabit. This is what netperf has to say about things. Before: marcus@lt:~$ netperf -H 192.168.1.1 TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 (192.168.1.1) port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.02 94.13 After: marcus@lt:~$ netperf -H 192.168.1.1 TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 (192.168.1.1) port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 339.15 Only 340 Mbps? What's up with that? Background info: I'm connecting through a gigabit switch to a sheevaplug. I have Cat5e wiring in the walls and the run is maybe 30 feet. If you're not familiar with netperf, it has a tendency to give very stable results and never lie.

    Read the article

  • xauth, ssh and missing home directory

    - by flolo
    We have several servers, and normaly everything works fine, except now... we get a new aircondition installed. This takes 36 hours and for this time almost all servers got shutdown, only 2 remaining servers run for the most important tasks (i.e. accepting incoming email, delivering some important websites, login-server). Everybody was informed that when they need appropiate data from the homedirs they should fetch it before take down. Long story short: Someone realized that he have run a certain program on one of the servers. No Problem, he can remote login into our login server and run the programm there without home directory (binaries are local and necessary information can be copied to the /tmp). That works like a charm until... ... the user needs to run a GUI programm. I find no easy way to make it running, usually ssh -Y honk@loginserver is enough but now the homedirectory is missing and ssh is not able to copy the cookies into ~/.Xauthority (as the file server with the home directories is down). Paranoid as all systemadmins all X-Server just listen locally not on tcp ports, so no remote X connection possible SSH config is waterproof - i.e. no way to set environment variables. My Problem is, that the generated proxy MIT cookie from ssh get lost as the .Xauthority doesnt exist. If I could retrieve it somehow I could reenter it a .Xauthority in /tmp. The only other option (besides changing the config) which came to my mind is, makeing a tunnel (netcat, or better ssh) from the remote host to the loginserver and copy the cookie manually (not sure if it the tcp-unix domain socket stuff works as expected). Any good suggestions (for the future - now our servers are already up)?

    Read the article

  • Host name change breaking http? Fedora

    - by Dave
    OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

    Read the article

  • Microsoft Licensing Scenario/Questions [closed]

    - by user17455
    Possible Duplicate: Can you help me with my software licensing question? I am a member of a team developing a third party application (APP) that listens for and services connections from remote devices via TCP. Also, some of these remote devices allow 1 or more users to interact with the remote device. On some of the remote devices, it is impossible for a user to interact with the device. The user/remote device makes no use of any Windows Server service - not DHCP, not IIS, not File Server, not Print Serer, not AD. The remote device's only connection to the Windows Server machine is through the APP's TCP ports. Our company has no interaction with Microsoft. We do not have a Microsoft sales team. Past inquiries have determined that it is cheaper for us to buy Microsoft software (and CALs) retail than to enter into any kind of "arrangement" with Microsoft. I have many questions about SQL Server CALs and Windows Server 2008 CALs. How can I obtain authoritative/legally binding answers? I am not looking for FREE legal advice. I AM looking for FREE advice about who/what/where I can responsibly spend my money to get meaningful information. I fear that passing this on to the local company law firm will just mean that I will be paying them to educate themselves on Microsoft licensing. And if that's like writing code to a new Microsoft API - they are not going to get it right the first time. Going to Microsoft for answers sounds like swimming up to a hungry shark and asking "One leg or two?" I am hoping someone has been down this road before and knows a law firm/lawyer that is experienced in these matters. Any help/suggestion welcome. Thanks.

    Read the article

  • Linux/hostapd: AP can ping clients, clients can access internet, can't access www@wlan1 with more than 5-6 packets at once

    - by mhambra
    Please edit the title, can't make it sound better. -- OP. Hi all, I have a Wifi USB dongle in a PC, that serves as an AP for laptop. wlan1: 192.168.2.1, netmask 255.255.255.0, routed: route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 ping 192.168.2.2 (laptop): ping was ok for lot of packets. Now, I try to access 192.168.2.1:80/myindex.html (apache) from laptop, and can see that own 1kb test page. But, trying to access 192.168.2.1:80/my.jpg, I see the following: GET /my.jpg HTTP/1.1 200 OK <jpg header, about a kilobyte> <TCP packet retransmisson> <TCP packet retransmisson> <end of stream> It seems to be a hostapd's problem (networked stuff worked fine with Ad-Hoc), but it may be also forwarding/routing problem too. What to google for? Even more strange, SSH to that host works fine.

    Read the article

  • Oracle Error ORA-12560 TNS:Protocol Adapter error?

    - by David Basarab
    I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

    Read the article

  • SQL Server 2005 SE SP3 on Windows Server 2008 R2 x64 premature query disconnections

    - by southernpost
    New Dell PowerEdge R910, 4x8 Intel X7560, 192GB RAM, hardware NUMA, local RAID, Broadcom NetExtreme II multiport NIC, unteamed, TCP Offload disabled, RSS disabled, NetDMA disabled, Hyperthreading disabled. SQL Server 2005 SE x64 SP3 on Windows Server 2008 R2 EE x64. No other apps on server. Max Mem = 180GB, Max DOP = 4. Existing Windows Server 2003 R2 EE x64 app server connecting to Dell via firewall using SQL Authenticated logins. Symptoms: Intermittent errors at the app server: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) Findings: Running queries from SSMS located on another machine within the same domain as the SQL Server run without error. SQLIO showed good performance. Windows and SQL logs show no related messages. Microsoft reveiwed PssDiag trace and stated that "We are not seeing timeouts from SQL Side. The queries bring run against the database are timing out within 9secs. This is a database connectivity error." "we can also see from the AttnSeq column that we are also not seeing any Attentions from the SQL Side.". Dell has confirmed that we are using the latest Broadcom drivers.

    Read the article

  • Openvpn - stuck on Connecting

    - by user224277
    I've got a problem with openvpn server... every time when I trying to connect to the VPN , I am getting a window with login and password box, so I typed my login and password (login = Common Name (user1) and password is from a challenge password from the client certificate. Logs : Jun 7 17:03:05 test ovpn-openvpn[5618]: Authenticate/Decrypt packet error: packet HMAC authentication failed Jun 7 17:03:05 test ovpn-openvpn[5618]: TLS Error: incoming packet authentication failed from [AF_INET]80.**.**.***:54179 Client.ovpn : client #dev tap dev tun #proto tcp proto udp remote [Server IP] 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert user1.crt key user1.key <tls-auth> -----BEGIN OpenVPN Static key V1----- d1e0... -----END OpenVPN Static key V1----- </tls-auth> ns-cert-type server cipher AES-256-CBC comp-lzo yes verb 0 mute 20 My openvpn.conf : port 1194 #proto tcp proto udp #dev tap dev tun #dev-node MyTap ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/VPN.crt key /etc/openvpn/keys/VPN.key dh /etc/openvpn/keys/dh2048.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt #push „route 192.168.5.0 255.255.255.0? #push „route 192.168.10.0 255.255.255.0? keepalive 10 120 tls-auth /etc/openvpn/keys/ta.key 0 #cipher BF-CBC # Blowfish #cipher AES-128-CBC # AES #cipher DES-EDE3-CBC # Triple-DES comp-lzo #max-clients 100 #user nobody #group nogroup persist-key persist-tun status openvpn-status.log #log openvpn.log #log-append openvpn.log verb 3 sysctl : net.ipv4.ip_forward=1

    Read the article

  • Slow tracepath on local LAN

    - by Simone Falcini
    I am on EXSi and I have 2 instances: Ubuntu and CentOS. These are the network configurations Ubuntu eth0 Link encap:Ethernet HWaddr 00:50:56:00:1f:68 inet addr:212.83.153.71 Bcast:212.83.153.71 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76059 errors:0 dropped:26 overruns:0 frame:0 TX packets:7224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6482760 (6.4 MB) TX bytes:2080684 (2.0 MB) eth1 Link encap:Ethernet HWaddr 00:0c:29:46:5a:f2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:252 errors:0 dropped:0 overruns:0 frame:0 TX packets:608 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42460 (42.4 KB) TX bytes:82474 (82.4 KB) /etc/iptables.conf *nat :PREROUTING ACCEPT [142:12571] :INPUT ACCEPT [5:1076] :OUTPUT ACCEPT [8:496] :POSTROUTING ACCEPT [8:496] -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [2:72] :FORWARD ACCEPT [4:336] :OUTPUT ACCEPT [6:328] -A INPUT -i eth1 -p tcp -j ACCEPT -A INPUT -i eth1 -p udp -j ACCEPT -A INPUT -i eth0 -p tcp --dport ssh -j ACCEPT COMMIT CentOS eth0 Link encap:Ethernet HWaddr 00:0C:29:74:1C:55 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe74:1c55/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:499 errors:0 dropped:0 overruns:0 frame:0 TX packets:475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68326 (66.7 KiB) TX bytes:82641 (80.7 KiB) The main problem is that if i execute this command from the CentOS instance ssh 192.168.1.2 it takes more than 20s to connect. It seems like it's routing the connection to the wrong network. What could it be? Thanks!

    Read the article

  • Connecting to Server 2008 shares fails

    - by Chris J
    I'm having problems getting a reliable share working on an x64 Server 2008 R1 SP1 server. All works well after a reboot, but after some time (within a day) the shares become unavailable to XP and Server 2003 servers. Interestingly, they remain available to other Server 2008 servers. On trying to access \\server\share, Server 2003 returns immediately and simply gives me the message "The specified network name is no longer available", XP takes a minute or two to timeout before giving the same message. There doesn't seem to be anything in the event logs indicating a problem. Doing some googling over the last day or two I've seen the following blamed: Bad network drivers ... I've updated to the latest drivers with no result Symantec anti-virus ... we're not using it (currently no AV on the server) Receive window auto-tuning ... I've disabled with netsh int tcp set global autotuninglevel=disabled and netsh int tcp set global rss=disabled None of these have had an effect. Windows Firewall is currently disabled. As other Server 2008 boxes (both x32 and x64) can connect, I can only assume that there's some new security configuration that's not quite right - or there's an AD issue that I need to trace, but don't know where to start. Even if anyone doesn't know how to resolve, if someone knows what I need to look for with Wireshark this would be a help.

    Read the article

  • glusterfs mounts get unmounted when 1 of the 2 bricks goes offline

    - by Shiquemano
    I have an odd case where 1 of the 2 replicated glusterfs bricks will go offline and take all of the client mounts down with it. As I understand it, this should not be happening. It should fail over to the brick that is still online, but this hasn't been the case. I suspect that this is due to configuration issue. Here is a description of the system: 2 gluster servers on dedicated hardware (gfs0, gfs1) 8 client servers on vms (client1, client2, client3, ... , client8) Half of the client servers are mounted with gfs0 as the primary, and the other half are pointed at gfs1. Each of the clients are mounted with the following entry in /etc/fstab: /etc/glusterfs/datavol.vol /data glusterfs defaults 0 0 Here is the content of /etc/glusterfs/datavol.vol: volume datavol-client-0 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs0 end-volume volume datavol-client-1 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs1 end-volume volume datavol-replicate-0 type cluster/replicate subvolumes datavol-client-0 datavol-client-1 end-volume volume datavol-dht type cluster/distribute subvolumes datavol-replicate-0 end-volume volume datavol-write-behind type performance/write-behind subvolumes datavol-dht end-volume volume datavol-read-ahead type performance/read-ahead subvolumes datavol-write-behind end-volume volume datavol-io-cache type performance/io-cache subvolumes datavol-read-ahead end-volume volume datavol-quick-read type performance/quick-read subvolumes datavol-io-cache end-volume volume datavol-md-cache type performance/md-cache subvolumes datavol-quick-read end-volume volume datavol type debug/io-stats option count-fop-hits on option latency-measurement on subvolumes datavol-md-cache end-volume The config above is the latest attempt at making this behave properly. I have also tried the following entry in /etc/fstab: gfs0:/datavol /data glusterfs defaults,backupvolfile-server=gfs1 0 0 This was the entry for half of the clients, while the other half had: gfs1:/datavol /data glusterfs defaults,backupvolfile-server=gfs0 0 0 The results were exactly the same as the above configuration. Both configs connect everything just fine, they just don't fail over. Any help would be appreciated.

    Read the article

  • Gigabit network limited to 25MB/s by CPU. How to make it faster?

    - by netvope
    I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? The other computers in the network can usually transfer at 50+MB/s without problems. And a minor question: How can I find out what is the driver in use for eth0?

    Read the article

  • Any ideas why Ettercap filters aren't seeing packet data?

    - by Bryan
    I'm using an Ettercap filter to detect a query response coming back from a particular service on a remote machine. When I see a response from the service, I'm searching through the data in the packet to see if an offset is a specific value, and if so I'm changing the value at another offset. Trouble is, when I try this on a new virtual machine I built my Ettercap filter's no longer getting any data in the DATA.data variable available to it. if(ip.proto == TCP && tcp.src == 17867) { msg("Response seen!\n"); if(DATA.data + 2 == "\0x01") { msg("Flag detected!\n"); DATA.data + 5 = 0x09; } } The filter's getting applied to the traffic because "Response seen!" messages get printed out by Ettercap. However, "Flag detected!" messages do not. I think DATA.data is indeed empty because if I change my second "if" statement to check for DATA.data == "" then the "Flag detected!" message gets printed. Any ideas why this may be happening?! Also, if this is the wrong site to be asking questions like this, please let me know. I wasn't sure if it fit better here or somewhere like superuser or serverfault. By the way, this is a cross-post from StackOverflow... I should have posted on this forum instead I think. :)

    Read the article

  • Not able to connect to port different than 22 - OpenVPN

    - by t8h7gu
    I have OpenVPN network with 5 clients. Computer with Arch Linux which hosts OpenVPN server, It also hosts virtual machine with Computer with CentOS which is also connnected to OpenVPN subnet. Windows 8 which hosts virtual machine with CentOS. Both of them are connected to OpenVPN. Last one machine is virtual machine with CentOS which is hosted by computer with Ubuntu 14( which is not connected to OpenVPN. All machines in OpenVPN subnet are bolded. All phisical computers are in different networks. The problem is that when I use nmap to scan Windows and it's guest virtual machine it's saids that host seems down. When I force namp to scan specific port it shows filtered state: nmap -Pn -p 50010 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 19:49 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.11s latency). rDNS record for 10.8.0.3: node3.com PORT STATE SERVICE 50010/tcp filtered unknown Telnet also cannot connect to this port telnet n3 50010 Trying 10.8.0.3... telnet: Unable to connect to remote host: No route to host But ss on this host show's proper state of this port ss -anp | grep 50010 LISTEN 0 50 10.8.0.3:50010 *:* users:(("java",12310,271)) What might be possible reason of that and how to fix it? EDIT I've found that I am able to connect via telnet to ssh port: telnet n3 22 Trying 10.8.0.3... Connected to n3. Escape character is '^]'. SSH-2.0-OpenSSH_5.3 So it seems that it's not problem with Windows firewall. But I have no idea what it might be. Also nmap result for first thousand ports: nmap -Pn -p 1-1000 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 20:08 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.49s latency). rDNS record for 10.8.0.3: node3.com Not shown: 999 filtered ports PORT STATE SERVICE 22/tcp open ssh Nmap done: 1 IP address (1 host up) scanned in 77.87 seconds

    Read the article

  • Sendmail Configuration for Exchange Server

    - by user119720
    i need help for sendmail configuration in our linux machine. Here the things: I want to send email to outside by using our exchange server as the mail relay.But when sending the email through the server,it will response "user unknown".To make it worse, it will bounce back all the sent message to my localhost. I already tested our configuration by using external mail server such as gmail and yahoo,the configuration is working without any issue and the email can be sent to the recipient.Most of the configuration of my sendmail is based on here. authinfo file : AuthInfo:my_exchange_server "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" AuthInfo:my_exchange_server:587 "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" sendmail.mc : FEATURE(authinfo,hash /etc/mail/authinfo.db) define(`SMART_HOST', `my_exchange server')dnl define('RELAY_MAILER_ARGS', 'TCP $h 587') define('ESMTP_MAILER_ARGS', 'TCP $h 587') define('confCACERT_PATH', '/usr/share/ssl/certs') define('confCACET','/usr/share/ssl/certs/ca-bundle.crt') define('confSERVER_CERT','/usr/share/ssl/certs/sendmail.pem') define('confSERVER_KEY','/usr/share/ssl/certs/sendmail.pem') define('confAUTH_MECHANISMS', 'EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') TRUST_AUTH_MECH('EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') define('confAUTH_OPTIONS, 'A')dnl My first assumptions the problem occur is due to the authentication problem, as exchange server need encrypted authentication (DIGEST-MD5).I have already changed this in the authinfo file (from plain login to digest-md5 login) but still not working. I also can telnet our exchange server.So the port is not being blocked by firewall. Can someone help me out with this problems?I'm really at wits ends. Thanks.

    Read the article

  • Install multiport module on iptables

    - by tarteauxfraises
    I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp The result of iptables -L -n -v command : $ iptables -L -n -v Chain INPUT (policy ACCEPT 6 packets, 456 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 3 packets, 396 bytes) pkts bytes target prot opt in out source destination Chain fail2ban-apache (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 What can i do to compile or to enable the multiport module? Thanks in advance for your help

    Read the article

  • iptables logging not working?

    - by vps_newcomer
    OS: Ubuntu 10.04 Logging daemon: rsyslog For some reason i'm not getting any iptables logs, even thought i don't look through them very often i'd still like to get it working for the sake of it working XD Here is my /etc/ryslog.d/iptables.conf :msg, contains, "[IPTABLES]" -/var/log/iptables.log & ~ My iptables logging prefix is "[IPTABLES]" followed by whatever else (example [IPTABLES] Denied xyz) the /var/log/iptables.log file is being created, however its not getting any entries. I can see the logging entries in dmesg but not in syslog or messages. Whats going on? EDIT: My iptables logging rules: # logging limit LoggingLimit=5/min LoggingPrefix=IPTABLES # Logging chain iptables -N LOG_REJECT iptables -A LOG_REJECT -j LOG # join INPUT to LOG_REJECT iptables -A INPUT -j LOG_REJECT # logging iptables -A LOG_REJECT -p tcp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied TCP: " #--log-level 7 iptables -A LOG_REJECT -p udp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied UDP: " #--log-level 7 iptables -A LOG_REJECT -p icmp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied ICMP: " #--log-level 7 Update: I found a thread that has the same symptoms as i do, apparently is a kernel bug. I am using a VPS so could anyone point me on how to upgrade my kernel or apply a workaround? I couldn't find a 2.6.34 kernel listed in apt-cache. Thread: http://www.linode.com/forums/viewtopic.php?t=5533

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >