Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 26/584 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• How can I format a USB "thumb drive" so it will be readable on OS X and Windows?

  - by Ethan

  I have an OS X system. I want to use it to put some files on a USB drive and then be able to loan the drive to Mac and XP and Vista users so they can get the files off it. I also need to wipe the drive clean first to make sure there's nothing sensitive on it by accident because I'm going to be passing it around. What the name of the filesystem format I want? What's the procedure? Command line operations are fine.

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Does a Samsung G3 Station external hard drive stop working when power supply is too high?

  - by Cacovsky

  I have a Samsung G3 Station 2TB external hard drive (link to PDF specs here). It was working perfectly when I accidentally plugged it in my notebook's power source. The notebook's power source is 19V/3.42A. The hard drive's is 12V/2A and I know that, inside its case, there is regular 2TB SATA drive, along with some sort of adapter. Does this adapter has some kind of power protection? I opened the case and the hard drive board smells bad. Does my data is forever lost or can I replace its board?

  Read the article

• Installing a 3.5" hard drive in a 2.5" bay?

  - by Javawag

  I know this question seems ridiculous, but my server (actually a Mini-ITX computer) has a 2.5" hard drive bay and an empty CD-ROM bay underneath it. If I removed the hard drive bay, I could probably mount a 3.5" hard drive in the CD-ROM bay which is unused... I know it's a big of a kludgy way to do things but it does mean upgrading the hard drive to 2TB is much cheaper. My question is: are the power requirements of a 3.5" disk the same as 2.5" one? I know the connectors physically will still fit, but I don't want to destroy my server!

  Read the article

• Hard drive after PCB swap strange stuff

  - by ramyy

  I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

  Read the article

• How do I make a USB RS232 dongle show up in /dev/ttyUSB* ?

  - by mtrw

  I have a couple of FTDI based USB to Rs232 serial dongles. Sometimes when I plug them into my Ubuntu 10.04 laptop, they show up as /dev/ttyUSB0 and /dev/ttyUSB1, which is what I want to have happen. But sometimes they don't. When they don't, sometimes rebooting fixes the problem and sometimes it doesn't. They always show up in lsusb hanging off of Bus 5: Bus 005 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I can see them if I do ls /dev/bus/usb/005 as 002 and 003. But if I pass /dev/bus/usb/005/002 to pyserial, which is what I'm using to access /dev/ttyUSBx, I get SerialException("Could not open port: [Errno 13] Permission denied: '/dev/bus/usb/005/002'",).

  Read the article

• Hardware question; booting ubuntu off of USB flash drive?

  - by Kon

  I'm currently running ubuntu off of a USB 3.0 flash drive on my laptop, and I have another USB 3.0 flash drive I use for storing larger files that I need to access and whatnot. But the issue is that both of the usb 3.0 flash drives don't fit next to each other at all, so I'm forced to use another usb 2.0 port located in a different spot on my laptop. Now my question is that if I use a USB 3.0 hub will that slow my connections down at all? or cause some sort of interference? Another question I had which I was unable to find anywhere on the internet is if there was a USB 3.0 hub with more than one upstream connection? Thanks for your time!

  Read the article

• How to install Google drive? [duplicate]

  - by Tamal Das

  This question already has an answer here: Is there a Google Drive client available? 9 answers How to install Google drive in Ubuntu 13.04? I am trying to find out an installation file from Internet (by using Google search). But, am not able to find out such installer.

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• Multi-partition USB stick

  - by nightcracker

  In my freelance job as "the dude that fixes your computer" I have an extremely handy tool, a bootable USB stick with Ubuntu LiveCD that allows me to recover and investigate in a known, working environment. Now, I want to reformat this USB stick and reinstall with Casper-RW persistance. I did this a few times before with a FAT-formatted USB stick. It was a horror. The USB drive corrupted constantly, by people accidently removing the USB stick, the computer not properly shutting down, ETC. Now what I want to create a multi-partition USB stick so I can put Ubuntu on a ext partition, but still be able to store some Windows stuff in it, by having a secondary FAT partition. However I read somewhere that Windows will only check the first partition on USB sticks, giving a problem with the first bootable linux partition. Is this possible on some way? EDIT Perhaps it wasn't clear what the problem is. The problem is that I read somewhere that Windows will only recognize the first partition on a USB stick. But I want two partitions, a ext partition and a FAT partition. No issues so far, but in order to be bootable the ext partition must be the first one!

  Read the article

• How to access files on a USB-connected NTFS disk removed from a Win7 notebook?

  - by yosh m

  My daughter seems to have fried her motherboard in her Lenovo Notebook. The disk seems to be fine. I removed the disk and used a universal disk-to-USB kit to attach it to another computer. The disk is recognized fine and I can peruse it in Windows Explorer. The problem is that the files she would like to recover from it are located in places that Windows refuses to let me access. When I try, for example, to enter the directory "Documents and Settings" it gives me an "Access is denied" error. Same thing when I try to go into the various User directories and other locations. I thought to try creating a Ghost image & retrieve the files from that, but Ghost seems to croak when I try to run it - apparently it doesn't like accessing the disk via a USB connection (even though I've told it to install the drivers for USB). Any other ideas about how to get to the files I need, either through Windows or perhaps some other OS that I could boot from a CD that can read an NTFS disk? Thanks, Yosh

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• USB packets - receive wrong data

  - by regorianer

  i have a little python script which shows me the packets of an enocean device and does some events depending on the packet type. unfortunately it doesn't work because i'm getting wrong packets. Parts of the python script (used pySerial): Blockquote ser = serial.Serial('/dev/ttyUSB1',57600,bytesize = serial.EIGHTBITS,timeout = 1, parity = serial.PARITY_NONE , rtscts = 0) print 'clearing buffer' s = ser.read(10000) print 'start read' while 1: s = ser.read(1) for character in s: sys.stdout.write(" %s" % character.encode('hex')) print 'end' ser.close() output baudrate 57600: e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 output baudrate 9600: a5 5a 0b 05 10 00 00 00 00 15 c4 56 20 6f a5 5a 0b 05 00 00 00 00 00 15 c4 56 20 5f linux terminal baudrate 57600: $stty -F /dev/ttyUSB1 57600 $stty < /dev/ttyUSB1 speed 57600 baud; line = 0; eof = ^A; min = 0; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $while (true) do cat -A /dev/ttyUSB1 ; done myfile $hexdump -C myfile 00000000 4d 2d 60 4d 2d 60 5e 40 4d 2d 60 5e 40 4d 2d 60 |M-M-^@M-^@M-| 00000010 4d 2d 60 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 4d 2d |M-M-M-M-^@M-| 00000020 60 4d 2d 60 5e 40 5e 40 5e 40 5e 40 5e 40 5e 40 |M-^@^@^@^@^@^@| 00000030 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 5e 40 5e |^@M-M-M-`^@^@^| 00000040 40 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 |@^@M-M-M-`| 0000004c linux terminal baudrate 9600: $hexdump -C myfile2 00000000 5e 40 5e 55 4d 2d 44 56 30 4d 2d 3f 5e 40 5e 40 |^@^UM-DV0M-?^@^@| 00000010 5e 55 4d 2d 44 56 20 5f |^UM-DV _| 00000018 the specification says: 0x55 sync byte 1st 0xNNNN data length bytes (2 bytes) 0x07 opt length byte 0x01 type byte CRC, data, opt data und nochmal CRC but I'm not getting this packet structure. The output of the python script differs from the one I get via the terminal. I also wrote the python part with C, but the output is the same as with python As the USB receiver a BSC-BoR USB Receiver/Sender is used The EnOcean device is a simple button

  Read the article

• Gui Batch program on USB

  - by Chris Okyen

  When I put my USB drive into a computer, I want autorun.inf to run a batch file that will have a win32/winform GUI windows interface to allow the user to select a program to run from the beginning similiar to like this: Please let me know if windows allows this without it being done programmatically. I know their are some automation programs that work by generating code based on what it records you do. But I don't knwo of any already built windows prompt like this, so I don't knwo how to record such an action.

  Read the article

• Error splicing file: Input/output error with a USB SD/HC card reader [closed]

  - by PirateRussell

  I recently got a new Droid Bionic, and it has the SD/HC card. Today, I got a new USB card reader that reads the HC format. When I plug it into my Linux Mint 11 (katya), Gnome 32-bit computer, I get this error every I try to copy or move any file off of the card onto my desktop: Error splicing file: Input/output error I don't have the problem on a Windows Vista computer. Any ideas??? Thanks in advance...

  Read the article

• USB: Missing Operating System - MAC

  - by Viraj Rao

  Have installed Ubuntu 11.10 on USB using Live CD. Followed the steps as provided in below link https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation After installation is complete in Refit menu, when i click on Linux icon I receive "Missing Operating System" message. I followed the steps provided in the below link from this forum, but am still receiving the same message. Unable to boot: Missing Operating system Any assistance is highly appreciated.

  Read the article

• Ralink-based USB Wi-Fi adapter drops connection after some time

  - by Hector Aguilar

  I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

  Read the article

• xubuntu 13.10: automount usb sticks

  - by netimen

  I have a freshly installed Xubuntu 13.10 on the Lenovo T520 laptop. In the Settings Manager — Removable Drives and Media I have the Mount removable drives when hot-plugged and Mount removable media when inserted checked. But when I insert an usb-stick (VFAT) it doesn't get auto-mounted. So I can't access it from terminal. It gets mounted only when I click on the drive icon on the desktop or in Thunar. Can I fix it somehow?

  Read the article

• import mini DV films from Samsung digital cam VP-D353 [USB]

  - by bobo

  I tried to import mini DV films from my old video camera VP-D353 and it's not reconised by my lubuntu.( 12.04 ) I tried "DVGRAB" which should work but it doesn't. I Found this tutorial http://www.foscode.com/linux-minidv-usb-video-capture/ But it's just saying "waiting for dv" I don't really know what should I do now. Here what I've got for the camera when I write : sudo lsub Bus 002 Device 013: ID 04e8:120f Samsung Electronics Co., Ltd thanks

  Read the article

• How to diagnose usb issue

  - by alexpotato

  Hey, So my kern.log and syslog files filled up with tons of the below messages: [514971.000109] phy0 - rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c4 with error -108. I was curious as to the steps to take, commands to run, places to look to help diagnose this issue (and curious as to what caused it)? I'm guessing it's something usb elated. I had some issues with my printer earlier today so this might be related. Thanks, Alex

  Read the article

• Unable to create an Ubuntu 12.10 USB stick on OS X

  - by Hex Bob-Omb

  I'm following the instructions to create a bootable Ubuntu 12.10 USB stick on OS X found here. I can do step 3 and hdiutil appears to work fine, but when I go to mount the resulting ubuntu.img file I get the same "no mountable file systems" error that I get when I try and open the ubuntu.iso file. No correctly sized volumes show up in diskutil list either. Any ideas? Using the most recent ubuntu-12.10-desktop-amd64.iso on Mountain Lion 10.8.2.

  Read the article

• Can't boot from Ubuntu 12.04 live USB

  - by 8vius

  I'm trying to recover GRUB after installing Windows 7. I installed Ubuntu 12.04 first, then installed Windows 7 so I lost the GRUB at startup. Made a USB stick with Ubuntu to boot from, I get the menu tell it to start and it takes off but then gets stuck. The last line showing on the screen is: ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 irq 17 or this: [4.793048] scsi9 : pata_jmicron Then it just gets stuck there and the screen flashes from time to time.

  Read the article

• UBS drive on Ubuntu on VM Virtualbox

  - by Raama

  OSX is my host OS I have windows xp and Ubuntu 10.10 on guest OS. They both work great. When I eject USB flash drive from host OS, it appears in windows guest OS but it does not appear in Ubuntu Guest OS. I never run both guest OS at the same time. its always either or. I am running, VM virtualbox 4.1.10 and installed latest guest additions and also installed VM virtualbox extension pack. Thanks for your help

  Read the article

• Can't access external USB storage after updating to 12.10

  - by user99252

  I installed Ubuntu 12.04 after Windows failed me and Samsung got a bit pissy about providing any help. I then upgraded to 12.10 after a week or two and suddenly my external USB devices no longer work. The same devices I plugged in are no longer recognised. As I say, I'm only a user of Ubuntu for a fortnight, so any advice and directions to very simple instructions, would be appreciated greatly. I've seen this asked elsewhere, but the advice was to ask again if you needed clarification.

  Read the article

• How should one handle an external hard drive without an enclosure?

  - by TheLakersHighlights

  How should I go about mounting an external hard drive without an enclosure? I have a IDE/SATA to USB adapter. But where should I put the drive, what side should be facing upwards, etc?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >