Search Results

Search found 10438 results on 418 pages for 'power architecture'.

Page 260/418 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• How to use my computer to control a lamp?

  - by nona urbiz

  I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

  Read the article

• Linux compilers for C/C++ on AMD "Bulldozer" CPUs like the Interlagos [closed]

  - by jstarek

  I am looking for a Linux compiler for C/C++ code that supports AMDs new "Bulldozer" architecture and produces efficient binaries for the Interlagos series Opterons. This seems to be a bit difficult because of the peculiarities of the Bulldozer microarchitecture. While AMD has a whitepaper with some details, I would like to see some independent analyses. The relevant paper from HeCToR focuses mostly on job placement and scheduling, which is an area we already investigate. So, who can recommend a good compiler comparison for Bulldozers running Linux? Does anyone have well-described benchmarks?

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• Regarding the battery of a new laptop [closed]

  - by Majed

  Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• Test site speed

  - by Elad Lachmi

  I am test driving an Akmai CDN architecture and before committing to buy, I would like to gauge the real performance gain from the acceleration feature. What would be the best MO for doing speed tests from different locations around the world? I would like to test the page load speed and not just the server response time. I would like to test speed from as many edge locations as possible. I do not mind a paid service as well, if it is optimal. Thank you!

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Any way to disable specific CPU sleep modes?

  - by Philippe

  I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy.

  Read the article

• Can't get PHP script to run when launched from Aptana Studio

  - by samuel

  I've been using notepad++ for web development (currently html, css, and some php and mysql). I decided to dive into an IDE to see if I could cut down on development time and have more power than notepad++. I grabbed Aptana yesterday and, after harassing it for a few hours, have finally gotten everything up and running. The only problem is that my web pages, which are .php's, do not execute any of their included .php code in the browser. as an example: <?php echo "IT WORKS WOOO"; ?> ought to print IT WORKS WOOO smack in the middle of my blank test page, and yet it does not. I checked to see if I had somehow forgotten how to do an echo statement and ran it on my desktop, using notepad++, and it worked just fine. I have the php plugin, have used the php perspective to write it and have launched it as a php web page, but nothing makes it execute the php within. Any ideas?

  Read the article

• How can I launch RemoteApp on Windows Server from server itself at startup

  - by Rusted

  I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

  Read the article

• Time values not saving in Airport Base Station MAC Timed Access List

  - by Boiler Bill

  I have an airport base station model A1354. I am attempting to setup MAC Timed Access so a laptop can only connect between 5:00AM and 11:00pm through the Airport Utility version 5.5.2 (552.11). My AEBS is running firmware version 7.5.2 When I try to enter the time values by double clicking over the time and entering 05:00 AM and 11:00PM the time values don't stay as soon as it looses focus. Instead they become what is in the following screenshot, and the laptop looses connectivity as soon as I update the base station. I also tried entering the values in military time with the same result. Any base station power users out there that know how I can get the time values to "stick"?

  Read the article

• VMWare Converter recommendations

  - by Tank Szuba

  I have two Ghost 14 backups of my machine. One for the machine fully configured with apps after and XP install and one of the last update before i re-imaged it (it's XP, I re-image about once every six months). I recently wanted to try simply using my initial image in a virtual environment to do my testing that generally causes me to need to re-image. I used the VMWare converter to convert the Ghost images to a virtual machine to use in Virtual box but they fail to properly boot. They get stuck after the bios loads and windows begins loading. If I power down the machine and refire it it will go to the error screen in windows that asks if you would like to boot to a different mode. none selected make any difference. What are some possible errors I should look for in the conversion process or in my settings for the converter?

  Read the article

• NTFS Error - file system structure is corrupt and unusable

  - by SomeGuy

  My Windows 7 (64) keeps completely locking up, and I have to hold the power button to shit it down. Event logs are showing EventID 55. I realize that this can be a warning sign of an impending disk failure, but my data on this machine is safely backed up and I don't feel like taking the time to replace the drive right now. When I have seen this problem before, I have been able to delete the offending folder with a Linux Live CD. (When CHKDSK /F didn't work). In this case, the folder is from VSS. I assume this is from Crashplan, my online backup provider. What are the ramifications of deleting this folder from Linux? Is it safe to do? "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy26."

  Read the article

• iPhone always assigned wrong ip

  - by Ashley Ray

  for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

  Read the article

• How to change or remove all traces of original author name in Excel 2010 document

  - by Adam Ryczkowski

  At our company we need to deploy one Excel Workbook in that way that nobody would see it is made by us by looking at the Office metadata. What fields do we need to look for? I know, that the document has track of original writer and the last save author. But is it all? I guess there might be some hidden properties, that might give our company name. Where to look for such fields? Is there any good editor available, or will explorer's property page give enough power? I use Excel 2010

  Read the article

• In general, do 3rd-party laptop AC adapters / chargers work reliably?

  - by MGOwen

  The AC adapters for my 2 dell laptops wore out very quickly. One supplies power but won't charge the battery (it's about 3 years old, the other is a bit newer). Both have worn through to the shielding around the notebook connector and look like they'll be unusable soon. Checking user reviews of the replacement adapter on Dell's own website, it appears they usually fail this fast. Apparently Dell does this deliberately to make money (their adapters sell for about 10-15 times what they cost to make). Same with replacement batteries. I can see there are plenty of much cheaper ($50 less) compatible AC adapters on eBay. Does anyone have experience with these? Naturally I'm nervous a crappy knock-off could fry my notebook, but has this ever actually happened to anyone recently? Has anyone had a good experience? Can anyone recommend a good online seller (who doesn't charge nonsensical shipping costs to Australia, preferably?)

  Read the article

• SOLR high CPU usage in amazon EC2

  - by user644745

  I installed solr-3.6 in my local windows box and it worked fine. I installed solr-4.0 in amazon ec2 linux large instance and the cpu usage shot upto 100%. It maintained at 80-90% average cpu power. I thought it could be because of 4.0, So I installed 3.6 in EC2 again. But again the CPU usage was 80-90% average. With both the versions, solr works in EC2. dont know why CPU usage is so high. i started the solr server using "sudo nohup java -jar start.jar &" In my local box java 1.7 is installed and in EC2 it is 1.6.0_24. I have mapped solr dir to an EBS volume. /dev/mapper/vg1-solr 8361916 1935928 6342128 24% /home/ec2-user/SOLR/solr/example/solr Is there any known issue ?

  Read the article

• Printer Brother DCP-110C Linux 64-bit drivers

  - by Ondra Žižka

  Hi, I need 64-bit Linux driver for DCP-110C (for Ubuntu 10.04 64-bit) I found only 32-bit here. http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html I've tried to follow those instructions. During the installation, I got this: ondra@ondra-doma:~/Downloads$ sudo dpkg -i --force-all dcp110clpr-1.0.2-1.i386.deb dpkg: warning: overriding problem because --force enabled: package architecture (i386) does not match system (amd64) (Reading database ... 257283 files and directories currently installed.) Preparing to replace dcp110clpr 1.0.2-1 (using dcp110clpr-1.0.2-1.i386.deb) ... Unpacking replacement dcp110clpr ... Setting up dcp110clpr (1.0.2-1) ... ln: creating symbolic link `/usr/lib/libbrcompij2.so.1.0': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so.1': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so': File exists After installation, the printer is listed at the cups server, but does not work (no command has any effect on printer (which is, of course, on and connected)). Anyone has found some working solution? Thanks, Ondra

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• Laptop charger dying after plugging in?

  - by Corey

  My laptop charger's transformer has a green light on it that indicates that it's plugged in and working. When I plug it into the wall, the light goes on as expected. As soon as I plug it into the laptop, the light immediately turns off and my laptop doesn't get any charge. After that, the charger's light doesn't turn green again, even though it is still plugged into an outlet. I need to unplug it from the wall and wait a few minutes. It's strange - unplugging and immediately re-plugging it does not bring back the charge; I have to wait. Is this a charger issue or a laptop issue? Edit: Hooked the charger into a voltmeter and power went through fine. I guess this means that it's a short in my laptop itself. What are my options now?

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >